X4200 with Red Hat Linux - Network not coming up

I have a new X4200 with a fresh install of Red Hat. I have eth0 configured with static IP and iptables disabled. When I connect the Ethernet cable between server and switch, I get link LED and activity LED. However, I can ping anything on the local network or ping the server. Mii-tool reports "no link". I can ping the locally and the loopback.
I have tested the cable and switch port with another computer and connectivity is fine.
Anyone have any idea what could be wrong?
Thanks.

You didn't specify which port you connected to on the x4200.
Note that RedHat considers Net2 to be eth0, and Net3 to be eth1 (for which it loads the e1000 driver (intel). The Net0 and Net1 interfaces are Nvidia ports, for which RedHat does not have a default driver.

Similar Messages

Oracle 8i installation with Red Hat Linux 6.2

Hi
Please help us in solving the below mentioned problem.
We are trying to install Oracle 8.1.7 under Linux 6.2 . During the installation the following error displays and could not able to finish the instllation. The problem is
Error in invoking target ntcontab.o of makefile /usr/local/u01/app/oracle/product/8.1.7/network/lib/ins_net_client.mk
If any has a soln for this please reply to us. Thanks in advance
regards
Santhosh
null

Miguel Tsuboyama (guest) wrote:
: Pinwu Xu (guest) wrote:
: : Terry (guest) wrote:
: : : Hi,
: : : I am still stuck on DISPLAY error.
: : : The messages I get when I issue ./runInstaller command are:
: : : Initailizing Java Virtual Machine from
: /usr/local/jre/bin/jre
: : : Please wait...
: : : Xlib: connection to "QIS:0.0" refused by server
: : : Xlib: Invalid MIT-MAGIC-COOKIE-1 KEY
: : : Java.lang.Internal Error: can't connect to X11 window
server
: : : using 'QIS:0.0' as the value of the DISPLAY variable
: : : QIS is the server name that I am installing Oracle to.
: : : The manual says I should set it to
: : : DISPLAY=work_station_name:0.0
: : : export DISPLAY
: : The work_station_name is the name of the machine the monitor
: : you are facing to connects to, with X Window running. If
: : you have only one machine, simply typing
: : export DISPLAY=:0
: : suffices.
: : Hope this helps.
: : : but I don't have any workstations connected to the linux
box
: : : yet. I am installing oracle to a standalone machine. What
: is
: : : that work_staion_name supposed to be? Obviously using the
: : server
: : : name as work station name didn't do me any good.
: : Pinwu
: You must grant permission to connect to the XServer...
: If you XServer was started by root, you must grant from root
the
: permission via: xhost +localhost
: Regards,
: Miguel T.
Hi Terry,
I initially experienced the same "connection refused" message as
you from xlib when performing a local installation using GNOME.
My problem was to do with logging on to X as root (to mount the
CDROM) and then switching to the oracle account to do the
install.
If I logged to X as oracle I didn't need to change the default
DISPLAY value of :0 .
Daniel.
null

How to run Weblogic Server 8.1 in Win 98/Red Hat Linux

I've receieved the Weblogic Server 8.1 Evaluation version. I've installed it successfully. But while I try to start the Weblogic Server the progress bar shows the completion of the server start but the indicator does not turn green. What might be the reason.Same is the problem with Red hat Linux 8.0 ? Please send in the solution

Joydeep,
WebLogic Platform 8.1 is not supported on Win 98 and Red Hat 8.0. Please
refer to the following url for more information.
http://e-docs.bea.com/platform/docs81/support/supp_plat.html#1048419
Regards,
Raj Alagumalai
WebLogic Workshop Support
"Joydeep Paul" <[email protected]> wrote in message
news:3f4e9723$[email protected]..
I've receieved the Weblogic Server 8.1 Evaluation version. I've installedit successfully. But while I try to start the Weblogic Server the progress
bar shows the completion of the server start but the indicator does not turn
green. What might be the reason.Same is the problem with Red hat Linux 8.0 ?
Please send in the solution

How to upgrdae Oracle Cluster on Red Hat Linux 3 to Red hat Linux 4 AS U 7

We need to upgrade our Clustered (2 Nodes) Oracle Database environment on Linux environment to Red Hat 4 AS 7. The current OS version is Red Hat 3 update 6. We use EMC SAN Storage as shared storage (OCFS and Raw Devices) for our 9i and 10g databases
Question: We will install (on local disks) Red Hat 4 AS Update 7 and then install ocfs and ASMlib RPMs. Is there any risk of loosing the existing (on Red Hat 3 update 6) ocfs file systems and raw devices (from EMC SAN Storgae) after we do fresh install of OS and ocfs and ASMlib RPMs? How can we keep the shared storage data quickly available (without restore from the backup) to the system after installing Red Hat 4 AS Update 7 and mentioned RPMs?

Tommy,
Below are the outputs in he current environmet with Red Hat Linux 3
# /bin/uname -a
Linux ghlx070ptlge.penske.com 2.4.21-37.0.1.ELsmp #1 SMP Wed Jan 11 18:44:17 EST 2006 i686 i686 i386 GNU/Linux
# rpm -qa | /bin/fgrep -i ocfs
ocfs-support-1.0.10-1
ocfs-2.4.21-EL-smp-1.0.14-1
ocfs-tools-debuginfo-1.0.10-1
ocfs-tools-1.0.10-1
# rpm -qa | /bin/fgrep -i oracleasm
oracleasm-2.4.21-37.0.1.ELsmp-1.0.4-1
oracleasm-support-2.0.1-1
[root@ghlx070ptlge root]#
Edited by: user8219029 on Apr 5, 2009 11:36 AM

OSP support for Red Hat Linux Advanced Server 5.0

Wondering, if anybody tried to install Red Hat Linux Advanced Server 5.0 with N1 SPS OSP? Does it work as with Red Hat Linux Advanced Server 4.0?
Thorleif Wiik

The current official GA date for SPS 6.0 is Aug 20. There is a follow-on release for plug-ins and the MS/CLI on Windows. This is currently scheduled for some time in September.

Memory Problem with Oracle10g R2 and red Hat linux 2.4.21-37.EL

Hi All.
i've a 64Bit red Hat Linux 2.4.21-37.EL , 5GB Ram , 3GB Swap Space.
Oracle10g R2. i've 2 prodection database each is having 1400MB of SGA.
when i check the free meory it shows only 12mb of ram is free..why..?
and in swap space it's only 200mb is used...why..?
when i check the dbwither is taking 1.2GB of RAM why..?
can anybody help me in this ...how to get free memory or configure os level to get more free memory.
Sarit
[email protected]

Linux uses Swap space to run applications. The RAM available may not be enough to run the applications so OS swaps the program between RAM and the swap space to run applications.
You can see your swap partition being used as the swap space with:
cat /proc/swaps
Regards,
Senthil Murugan

DB lookup problem with Sun One App. Server 7.0,MySQL3.x - Red hat linux 7.2

Hi Group,
I have deployed my project in sun one application server 7.0 installed in red hat linux 7.2 and database is mysql. Its working in fine in normal conditions. I could not able to get connection from datasource after I kept my server 10 hours ideal. Again its working fine once I restarted the server. Please give me any solution to prevent this.
The same project is working fine under all conditions in Sun one app server 7.0 installed in windows 2000 server without any look up probem. I Got this problem only in linux OS.
mysql datasource class com.mysql.jdbc.jdbc2.optional.MysqlDataSource
please find the below code..
Context ctx = new InitialContext();
Datasource testDS = (javax.sql.DataSource)ctx.lookup( "jdbc/testDS");
Connection con = testDs.getConnection();
connection pool settings
<jdbc-connection-pool steady-pool-size="8" max-pool-size="32" max-wait-time-in-millis="0" pool-resize-quantity="2" idle-timeout-in-seconds="0" is-isolation-level-guaranteed="false" is-connection-validation-required="false" connection-validation-method="auto-commit" fail-all-connections="false" datasource-classname="com.mysql.jdbc.jdbc2.optional.MysqlDataSource" name="testCP">
<property value="localhost" name="serverName"/>
<property value="3306" name="portNumber"/>
<property value="root" name="user"/>
<property value="test" name="databaseName"/>
</jdbc-connection-pool>
Regards,
Hari haran

My team solved the problem and I thought that we would share.
The version of Xalan that was packaged with the JRE, that is installed by the Sun One app server, was at least 2 versions out of date. Updating the Xalan package solves the issue and the WAR file now works.
Again, this appears to be only on the Linux version as the package deploys and works perfectly on the Windows version.

Help with installing pre-requisite packages on Red Hat Linux

Having issue with installing packages with yum
OS is RHEL 6 and following package which are prerequisites for Oracle Fusion Middleware install on Red Hat Linux 6
uname details as follows
2.6.32-220.el6.x86_64 #1 SMP Wed Nov 9 08:03:13 EST 2011 x86_64 x86_64 x86_64 GNU/Linux
Example error: yum install gives error as follows for all packages.
No package compat-libcap1-1.10-1 available
Need to install following packages (as mentioned in the prerequisites)
binutils-2.20.51.0.2-5.28.el6
compat-libcap1-1.10-1
compat-libstdc++-33-3.2.3-69.el6 for x86_64
compat-libstdc++-33-3.2.3-69.el6 for i686
gcc-4.4.4-13.el6
gcc-c++-4.4.4-13.el6
glibc-2.12-1.7.el6 for x86_64
glibc-2.12-1.7.el6 for i686
glibc-devel-2.12-1.7.el6 for i686
libaio-0.3.107-10.el6
libaio-devel-0.3.107-10.el6
libgcc-4.4.4-13.el6
libstdc++-4.4.4-13.el6 for x86_64
libstdc++-4.4.4-13.el6 for i686
libstdc++-devel-4.4.4-13.el6
libXext for i686
libXtst for i686
FYI: If this forum is not appropriate please let me know appropriate forum and shall repost there.

Hey,
Normally I use YUM : http://taliphakanozturken.wordpress.com/2012/03/17/how-to-use-yum-to-install-rpm-packages-with-dependencies/
Let me know if this is what are you looking for.
I hope it helps you,
Thiago Leoncio.

Installation Error with 10.1.3.1 on Red Hat Linux 4

Hi,
I am installing Oracle Application Server 10.1.3.1 on Red Hat Linux 4, and am receiving the following error:
Error in invoking target install of make file ins_sqlplus.mk. If I hit 'Ignore', I continue to receive errors regarding the makefile, and the configuration assistants fail.
What do I need to do to avoid getting this error? I am having a lot of trouble getting this installation to work successfully.
Thanks in advance for the help,
Nora

Hi Nora,
Just read pre-install steps well. I think you 're missing a couple of libraries at your OS.
So the only thing as I mentioned check pre-install steps or download pre-install script for AS9.0.4
https://metalink.oracle.com/metalink/plsql/f?p=130:14:4077412560366893878::::p14_database_id,p14_docid,p14_show_header,p14_show_help,p14_black_frame,p14_font:NOT,270683.1,1,1,1,helvetica
The output will help you to determine what you are missing.
one more thing check your ENV & swap
Hear from you & regards,
Hamdy

Problem in using Intermedia search with Oracel 9i DB on Red hat Linux

Hi,
I am unable to search a particular text in a blob using Intermedia search feature.I am using Oracle 9i (9.0.2 version)mounted on Red Hat Linux OS.
It works well on a Windows 2k OS.
To be more precise the following query fails when I pass the INSO_FILTER as the parameter.
"CREATE INDEX WM_WORKDETAILIDX ON WM_WORKDETAIL (WM_ITEMDATA) INDEXTYPE IS CTXSYS.CONTEXT Parameter(CTXSYS.INSO_FILTER)".
Any Help towards it is highly appreciated.
thanks & regards /Ravi

Did you check the script to try to see what it was/is doing?

Installing issues with Oracle Database 11g R1 on Red Hat Linux

Hi,
I am installing Oracle Database 11g on Red Hat Linux.
Version of the OS:Linux 2.6.9-5.ELsmp #1 SMP Wed Jan 5 19:30:39 EST 2005 i686 i686 i386 GNU/Linux
I have installed XManager on my PC to access the runtime installer in Graphical mode.
But once i click the installer file from Xmanager, it asks if the user wants to run it in terminal or simply run.
I selected the run in terminal and it starts the terminal where the initial pre-requisite checks are done i.e swap memory,temp and display.
The screen disappers and the graphical OUI never turns up...
Any pointer would be helpful.
Regards
Prabal

Try the following:
1. logon to the linux using root and issue the following command - xhost+
2. Open xterm in the Xmanager and logon to the linux using oracle user.
3. in the installation directory issue ./runInstaller.
Oded
[www.dbsnaps.com]
[www.orbiumsoftware.com]

Red Hat Linux Enterprise 5 64bit and Enterprise Manager 10.2.0.3 Install ?

Appreciate specific steps to ensure that Oracle Enterprise Manager 10.2.0.3 is installed as baseline for upgrade.
Red Hat Linux Enterprise 5.2 64bit.
The major problems are with the Configuration Assistant Web Cache during the Install. It fails with OUI-25031.
The configToolFailedCommands script contents is:
oracle.sysman.emcp.agent.AgentPlugIn

The root cause of Oracle Grid 10.2.0.3 did not install successfully was because of a Network Configuration Issue. i.e., some strange IP was being referenced over the internet and mapping it to my hostname of my server. I performed a "dig hostname" to see what ip was being associated with my so-called unique hostname. After fixing that problem and removing all of Oracle, I only had one warning with OPMN not starting. I discovered additional rpms that needed to be installed and all is good now until the next opportunity.
Learned Lesson: Pay Very Careful Attention to all configuration components and document as you go to ensure that you have your process documented.

Ocfs2 RAC on Red hat linux 6 - kernel -- 2.6.32-220.el6.x86_64 -Oracle11gR2

Hello,
We want to use ocfs2 as the shared file system for running Oracle RAC 11gR2 on Red hat linux 6.
The red hat linux kernel is 2.6.32-220.el6.x86_64.
I checked the ocfs2 download site and there is no ocfs2 rpms for Red hat 6, infact there are no ocfs2 rpms for Linux 6.
What options do I have if ...go down to Linux 5.x or move to Oracle linux 6.
If my understanding is correct Oracle linux 6 has ocfs2 in the kernel itself and does not need to be installed separately.
What other options do I have for having a shared file system .... ?
Please comment.
Thanks,
X.

Hi,
Please refer to Note 1365511.1 - How to Configure LUNs for ASM Disks using WWID, DM-Multipathing, and ASMLIB on RHEL 5/OL 5 and RHEL 6/OL 6 . That note can help you to install and configure ASM properly.
from the note:
" For Red Hat Enterprise Linux 6 (beginning with 6.4) the kernel driver package 'kmod-oracleasm' is available directly from Red Hat, and can be installed from the "RHEL Server Supplementary (v. 6 64-bit x86_64)" channel on Red Hat Network (RHN). Updates to this module will be provided by Red Hat. Please check with your Red Hat advisor for questions concerning support of the kernel driver package. The 'oracleasmlib' and 'oracleasm-support' packages are maintained by Oracle; they are required in order to use kmod-oracleasm. "
Cheers,
Krisz

Landscape Printing in adobe reader in Red hat linux

Hello Friends
I want Some help. I am using Red hat Linux on server and adobe Acrobat reader . when click on print option and set the option to landscape the output printout came in potrait and not landscape. Can any body please tell me what is the problem!

I have the same problem in openSUSE 11.1 64bit, except that this is with only one printer. If the page is portrait it prints in landscape, and if it is landscape it prints portrait, but across one end of the paper. Will not print correctly whatever I try. Changing the Autorotate or Portrait/Landscape settings has no effect.
The printer is an HP Business Inkjet 2200 which works fine with Adobe Reader 8 & 9 on SUSE 11.1 & 11.2 32bit. I've tried changing the printer drivers, etc but no fix. I can print to my other printer (HP LaserJet 2300) with no problems. Both printers are on a network with internal JetDirect cards. I have 2 desktops and a laptop ion the network, and all 3 are using the same hplip-cups drivers.
The workaround I am using is to print from Adobe Reader to a file, and then print the resulting Postscript file using Ghostscript. This works fine and keeps any settings I put in in Adobe Reader, such as multiple pages per sheet.

Failed Installation of Oracle8i on Red Hat Linux 7.0

Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.
null

Richard,
It's a glib problem. 8i uses the glib 2.1 libraries, while RH7 uses the 2.2. There is a patch available from oracle support, or you can find a solution that has worked for me twice on the otn discussion forum.
Cory Franzmeier
<BLOCKQUOTE><font size="1" face="Verdana, Arial">quote:</font><HR>Originally posted by Richard Yip ([email protected]):
Hi,
I have successfully installed Oracle8i(8.1.6) Enterprise edition on Red Hat Linux 7.0 but while running the Database Configuration Assistant, it stops at the database initialization portion. I suspect the initmig8i.ora file is causing the problem. I have followed the installation guide very closely and the SID is mig8i. What might be the problem causing it to stop? Now, I can't connect to database.
initmig8i.ora located at
/u01/app/oracle/admin/mig8i/pfile
# Copyright (c) 1991, 1998 by Oracle Corporation
# Example INIT.ORA file
# This file is provided by Oracle Corporation to help you customize
# your RDBMS installation for your site. Important system parameters
# are discussed, and example settings given.
# Some parameter settings are generic to any size installation.
# For parameters that require different values in different size
# installations, three scenarios have been provided: SMALL, MEDIUM
# and LARGE. Any parameter that needs to be tuned according to
# installation size will have three settings, each one commented
# according to installation size.
# Use the following table to approximate the SGA size needed for the
# three scenarious provided in this file:
# -------Installation/Database Size------
# SMALL MEDIUM LARGE
# Block 2K 4500K 6800K 17000K
# Size 4K 5500K 8800K 21000K
# To set up a database that multiple instances will be using, place
# all instance-specific parameters in one file, and then have all
# of these files point to a master file using the IFILE command.
# This way, when you change a public
# parameter, it will automatically change on all instances. This is
# necessary, since all instances must run with the same value for many
# parameters. For example, if you choose to use private rollback' segments,
# these must be specified in different files, but since all gc_*
# parameters must be the same on all instances, they should be in one file.
# INSTRUCTIONS: Edit this file and the other INIT files it calls for
# your site, either by using the values provided here or by providing
# your own. Then place an IFILE= line into each instance-specific
# INIT file that points at this file.
# NOTE: Parameter values suggested in this file are based on conservative
# estimates for computer memory availability. You should adjust values upward
# for modern machines.
db_name = "mig8i"
instance_name = mig8i
service_names = mig8i
control_files = ("/u01/app/oracle/oradata/mig8i/control01.ctl", "/u01/app/oracle/oradata/mig8i/control02.ctl", "/u01/app/oracle/oradata/mig8i/control03.ctl")
open_cursors = 100
max_enabled_roles = 30
db_block_buffers = 2048
shared_pool_size = 4194304
large_pool_size = 614400
java_pool_size = 0
log_checkpoint_interval = 10000
log_checkpoint_timeout = 1800
processes = 50
log_buffer = 163840
# audit_trail = false # if you want auditing
# timed_statistics = false # if you want timed statistics
# max_dump_file_size = 10000 # limit trace file size to 5M each
# Uncommenting the lines below will cause automatic archiving if archiving has
# been enabled using ALTER DATABASE ARCHIVELOG.
# log_archive_start = true
# log_archive_dest_1 = "location=/u01/app/oracle/admin/mig8i/arch"
# log_archive_format = arch_%t_%s.arc
# If using private rollback segments, place lines of the following
# form in each of your instance-specific init.ora files:
#rollback_segments = ( RBS0, RBS1, RBS2, RBS3, RBS4, RBS5, RBS6 )
# Global Naming -- enforce that a dblink has same name as the db it connects to
# global_names = false
# Uncomment the following line if you wish to enable the Oracle Trace product
# to trace server activity. This enables scheduling of server collections
# from the Oracle Enterprise Manager Console.
# Also, if the oracle_trace_collection_name parameter is non-null,
# every session will write to the named collection, as well as enabling you
# to schedule future collections from the console.
# oracle_trace_enable = true
# define directories to store trace and alert files
background_dump_dest = /u01/app/oracle/admin/mig8i/bdump
core_dump_dest = /u01/app/oracle/admin/mig8i/cdump
#Uncomment this parameter to enable resource management for your database.
#The SYSTEM_PLAN is provided by default with the database.
#Change the plan name if you have created your own resource plan.# resource_manager_plan = system_plan
user_dump_dest = /u01/app/oracle/admin/mig8i/udump
db_block_size = 8192
remote_login_passwordfile = exclusive
os_authent_prefix = ""
compatible = "8.0.5"
sort_area_size = 65536
sort_area_retained_size = 65536
Thank you.<HR></BLOCKQUOTE>
null

X4200 with Red Hat Linux - Network not coming up

Similar Messages

Maybe you are looking for