X58 Pro-E Not able to resume from S3 (sleep mode)

Not able to resume from S3 (sleep mode) if Base Clock is set over 169Mhz
ex. ASUS P6T Deluxe Mainboard fix this issue. - bios version is 1403.
from ASUS site. - Fix System may not able to resume from S3 if Base Clock is set over 170MHz.
Anybody same Problem??

Quote from: AstroRetro on 12-November-09, 21:41:14
I have the exact same issue on my X58 Pro-E.
I can confirm that from 133 to 166MHz S3 sleep works as expected. But above this, the PC appears to go to sleep normally, but cannot wake up. After pressing the power button, the drives spin up and peripherals are powered on, but bios does not load and screen stays blank. Once the PC internal speaker emitted a continuous buzz as well. Machine is unresponsive to power and reset button at this point and I need to hold power button her several seconds to force power off. Then when powering on again, the machine will fail to post again, but this time will automatically reboot, pass post and load windows with all previous applications running as if returning from hibernation.
This issue only occurs when "ACPI standby state" is set to S3 in the Bios. S1 standby state (the default) works fine at all clocks but of course leaves all the fans running. I have tried both states of "Re-call VGA Bios from S3" (Enabled/Disabled) and this has no effect on the issue.
Since this board can happily run at 200MHz FSB with my CPU, and pass all thermal and stability tests I throw at it, it is disappointing that I cannot use this very convenient feature.
I look forward to a beta bios revision to address this issue.
I have the exact same issue on my Pro-E. i've tried everything I can think of, but have had no success. Only S1 works. What's odd is that when I had everything stock, sleep mode in S3 worked great.

Similar Messages

Not able to resume from suspend/hibernate

Hey guys,
I've had this problem since the moment I installed Arch (according to the pacman logs 17th March), but I was hoping until now for it to get resolved after some update.
The problem is, I'm not able to resume after a suspend or hibernate. It's really strange, suspending is always successful, according to the last line in /var/log/pm-suspend.log, but after I try to resume I get a blank screen and the system goes into a loop of turning on/off the hardware in intervals of around 10 seconds, and it never stops actually. pm-utils is configured according to the wiki, and the swap partition is big enough to hold all the session data.
Things I've tried so far:
disabled KMS, added vga=0 to the kernel parameters
tried vesa (so it's obviously not related to the video drivers)
switched DEs (GNOME->KDE->currently XFCE)
running pm-suspend from terminal
added resume hook to /etc/mkinitcpio.conf
If you need more info please let me know,
Cheers

H/W path Device Class Description
==============================================
system Computer
/0 bus Motherboard
/0/0 memory 1015MiB System memory
/0/1 processor Genuine Intel(R) CPU T2080 @ 1.73G
/0/1/1.1 processor Logical CPU
/0/1/1.2 processor Logical CPU
/0/100 bridge ATI Technologies Inc
/0/100/1 bridge RS480 PCI Bridge
/0/100/1/5 display RC410 [Radeon Xpress 200M]
/0/100/12 storage IXP SB400 Serial ATA Controller
/0/100/13 bus IXP SB400 USB Host Controller
/0/100/13.1 bus IXP SB400 USB Host Controller
/0/100/13.2 bus IXP SB400 USB2 Host Controller
/0/100/14 bus IXP SB400 SMBus Controller
/0/100/14.1 storage IXP SB400 IDE Controller
/0/100/14.2 multimedia IXP SB4x0 High Definition Audio Controller
/0/100/14.3 bridge IXP SB400 PCI-ISA Bridge
/0/100/14.4 bridge IXP SB400 PCI-PCI Bridge
/0/100/14.4/1 bridge CB1410 Cardbus Controller
/0/100/14.4/2 eth0 network RTL-8139/8139C/8139C+
/0/100/14.4/4 wlan0 network AR2413 802.11bg NIC

Log-In Screen Does Not Appear When Resuming From Standby/Sleep

We are running T400s with XP SP3. From time to time when the computer comes out of standby the login screen will not appear. You just get the background image and your mouse. The mouse will move across the screen. However there is no screen saying press Ctrl+Alt+Del or swipe a finger to login. Also swiping a finger, or pressing ctr+alt+del, typing in your password and hitting Enter does not work either. It seems to be a random but frequent occurence. The couple of T400s with Vista installed do not have this problem. Any ideas?

After doing some troubleshooting I narrowed it down to the FingerPrint reader software. Sure enough after uninstalling it fixed the issue but then the finger print reader is useless. I looked at the latest Version, 3.2.0.116, readme file and it states:
<3.2.0.116>
- (Fix) Fingerprint Reader is not working ater 1 minute idle.
- (Fix) Fingerprint Reader is not working after standby/resume.
I am wondering if they are still working out the bugs, nothice the "l" missing from later. Any help would be a big plus as I need to roll out about 200 or so for my employer in the next month.

X58 Pro (Pro-E) resuming from S3 sleep fails at high BCLK

Hi, I was wondering if anyone else has the same problem as me. When I have the system bclk set above ~170 MHz, S3 no longer resumes from sleep mode and simply stays at a black screen. The power and fans spin up, but the system simply hangs there. This overclock is 100% stable, as I can run prime95 and memtest for hours without errors. I'd just really like to use the S3 sleep feature if at all possible.
I tried contacting MSI tech support, but their engineers were not able to reproduce the problem.

Quote from: AntLee29 on 25-March-10, 07:25:26
Hi, I was wondering if anyone else has the same problem as me. When I have the system bclk set above ~170 MHz, S3 no longer resumes from sleep mode and simply stays at a black screen. The power and fans spin up, but the system simply hangs there. This overclock is 100% stable, as I can run prime95 and memtest for hours without errors. I'd just really like to use the S3 sleep feature if at all possible.
I tried contacting MSI tech support, but their engineers were not able to reproduce the problem.
I'm using an Eclipse SLI which is also using the X58 chipset. With every BIOS so far, I've got the same problem: When I resume from S3 sleep, the RAM timings are incorrect. Sometimes it would make the CAS Latency slower, sometimes it did reduce it from CL 9 (as specified) to CL 4 (not even manually selectable). It doesn't matter whether auto or manual RAM timings have been set in the BIOS, after S3 the timings are changed. If I hibernate, the timings are always correct. I actually use hibernate to correct the wrong timings caused by S3 sleep. Luckily, my RAM so far has been able to run all of the resulting bad timings.
I would not be astonished if the many problems with S3 sleep I've seen so far on this forum, all reported by users with X58 chipset, could be related to such a bug.
Screet

FaceTime can't be installed on "Macintosh HD" because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion

FaceTime can’t be installed on “Macintosh HD” because the version of Mac OS X is too new. I removed all traces of FaceTime and still not able to install from App store. New to macbook pro with Lion.any help with this would be greaty appreciated.

FaceTime is included in Lion. The App Store version is for 10.6. If you deleted it, restore it from a backup, or reinstall the Mac OS.

Livecache database instance is not able to connect from DBMGUI

Hello,
We are facing very critical problem. Livecache database instance is not able to connect from DBMGUI .
DB instace is down currently, i checked X_server is running. when i am trying to conect using DBMGUi its going on hang status, same way if i am trying to start using LC10, its going on hang..
Could anybody please help me out if faced this problem.
Earlier it was working fine. But now It 's not able to connect through DBM tool.
Any help would of great help..
Thanks.
Dinesh
please find xserver*.prt files as attached
Date       Time       PID Typ MsgID Label    Message-Text
2009-06-12 03:10:43 2732     12902 XSERVER started, 'X64/SUN   7.6.04   Build 015-123-189-221'
2009-06-12 03:10:43 2732     12904 XSERVER Service port is 7210
2009-06-12 03:10:43 2732     12922 ENVIRON Command line arguments
2009-06-12 03:10:43 2732     12924 ENVIRON   [1] start
2009-06-12 03:10:43 2732     12923 ENVIRON Command line argument dump completed
2009-06-12 03:10:43 2732     12898 ENVIRON Resource limit dump start
2009-06-12 03:10:43 2732     12898 ENVIRON Started by user id 58007 group id 1670
2009-06-12 03:10:43 2732     12898 ENVIRON Current user id 58007 effective id 58007
2009-06-12 03:10:43 2732     12898 ENVIRON Current group id 1670 effective id 1670
2009-06-12 03:10:43 2732     12898 ENVIRON   cpu time unlimited
2009-06-12 03:10:43 2732     12898 ENVIRON   number of processes 29995
2009-06-12 03:10:43 2732     12898 ENVIRON   number of open files 2048
2009-06-12 03:10:43 2732     12898 ENVIRON   core size unlimited
2009-06-12 03:10:43 2732     12898 ENVIRON   file size unlimited
2009-06-12 03:10:43 2732     12898 ENVIRON   heap memory size unlimited
2009-06-12 03:10:43 2732     12898 ENVIRON   stack memory size 8192 KBytes
2009-06-12 03:10:43 2732     12898 ENVIRON   virtual memory size unlimited
2009-06-12 03:10:43 2732     12898 ENVIRON Resource limit dump completed
2009-06-12 03:10:43 2732     12898 ENVIRON Environment dump start
2009-06-12 03:10:43 2732     12898 ENVIRON   PATH=/usr/xpg4/bin:/usr/ccs/bin:/usr/bin
2009-06-12 03:10:43 2732     12898 ENVIRON    :/opt/SUNWspro/bin
2009-06-12 03:10:43 2732     12898 ENVIRON   IFS=
2009-06-12 03:10:43     0    0
2009-06-12 03:10:43 2732     12898 ENVIRON   TZ=NZ
2009-06-12 03:10:43 2732     12898 ENVIRON   TMP=/var/tmp
2009-06-12 03:10:43 2732     12898 ENVIRON   TMPDIR=/var/tmp
2009-06-12 03:10:43 2732     12898 ENVIRON   USER=sdb
2009-06-12 03:10:43 2732     12898 ENVIRON   LOGNAME=sdb
2009-06-12 03:10:43 2732     12898 ENVIRON   DBROOT=/sapdb/programs
2009-06-12 03:10:43 2732     12898 ENVIRON   LD_LIBRARY_PATH=/sapdb/programs/lib
2009-06-12 03:10:43 2732     12898 ENVIRON Environment dump completed
end of startup -
2009-06-12 03:10:44 2732 WNG 12458 XSERVER NISSL Utility init: CDKLoadSAPCryptModule: 51
2009-06-12 07:54:23 2732 ERR 11379 CONNECT Error getting TCP/IP host by address: '10.115.104.42.'
2009-06-12 08:47:00 17388 ERR 11925 XSERVER Send packet, Ref:9 - connection closed (send:EPIPE)
current write position -

Hi Ivan,
thanks for the reply, i used the commands suggested by you.
nzlsfn40:ltradm 43% pwd
/sapdb/data/wrk
nzlsfn40:ltradm 44% dbmcli -d LTR -u control,control db_state
OK
State
OFFLINE
nzlsfn40:ltradm 45% dbmcli -d LTR -u control,control db_admin
OK
nzlsfn40:ltradm 46% nzlsfn40:ltradm 46%
nzlsfn40:ltradm 46% dbmcli -d LTR -u control,control db_online
db_online commands is running since long and in knldiag. i am continuously watching logs as below, can you have any idea
Dinesh
logs :-
2009-06-12 10:58:34   137     12929 TASKING Task T114 started
2009-06-12 10:58:34   137     11007 COMMUNIC wait for connection T114
2009-06-12 10:58:34   137     11561 COMMUNIC Connected T114 local 3966
2009-06-12 10:58:34   137     11509 COMMUNIC Connection broken by appl state 10 T114
2009-06-12 10:58:34   137 WNG 11824 COMMUNIC Releasing T114 connection aborted
2009-06-12 10:58:34   137     12827 COMMUNIC wait for connection T114
2009-06-12 10:58:35    11     11561 COMMUNIC Connecting T115 local 3966
2009-06-12 10:58:35   138     12929 TASKING Task T115 started
2009-06-12 10:58:35   138     11007 COMMUNIC wait for connection T115
2009-06-12 10:58:35   138     11561 COMMUNIC Connected T115 local 3966
2009-06-12 10:58:35   138     11509 COMMUNIC Connection broken by appl state 10 T115
2009-06-12 10:58:35   138 WNG 11824 COMMUNIC Releasing T115 connection aborted
2009-06-12 10:58:35   138     12827 COMMUNIC wait for connection T115
2009-06-12 10:58:36    11     11561 COMMUNIC Connecting T116 local 3966
2009-06-12 10:58:36   139     12929 TASKING Task T116 started
2009-06-12 10:58:36   139     11007 COMMUNIC wait for connection T116
2009-06-12 10:58:36   139     11561 COMMUNIC Connected T116 local 3966
2009-06-12 10:58:36   139     11509 COMMUNIC Connection broken by appl state 10 T116
2009-06-12 10:58:36   139 WNG 11824 COMMUNIC Releasing T116 connection aborted
2009-06-12 10:58:36   139     12827 COMMUNIC wait for connection T116

OIM 11G-prepop adapters not able to read from User form

When I try to auto provision ldap account for users after creation of OIM record using GTC, the ldap provisioning doesnt happen. Basically the prepop adapters not able to read from Xel user form. I am stuck with this issue for a while now .
I tried remapping..ect etc..ntng helped.
None of the process form fields are getting prepopulated, when I hard coded avlue in prepop adapters for all the reqd fields in process form, proviosioning gets completed successfully.
Pls. help me with this.
Thanks.
~VSN
I get the below errorr:
<BEA-000000> <Class/Method: tcAdapterExecuter/executeRuleGenerators encounter some problems: java.lang.Exception: Error retrieving user info: User Login
java.lang.Exception: java.lang.Exception: Error retrieving user info: User Login
at java.lang.Throwable.<init>(Throwable.java:67)
at com.thortech.xl.dataobj.rulegenerators.tcAdapterExecuter.executeRuleGenerators(tcAdapterExecuter.java:205)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.setDataFromAdapter(tcPrePopulateUtility.java:1020)
at com.thortech.xl.dataobj.util.tcPrePopulateUtility.prePopulate(tcPrePopulateUtility.java:346)
at com.thortech.xl.dataobj.util.tcOrderPackages.computeProcessFormData(tcOrderPackages.java:901)
at com.thortech.xl.dataobj.util.tcOrderPackages.createOrder(tcOrderPackages.java:423)
at com.thortech.xl.dataobj.util.tcOrderPackages.orderPackageForUser(tcOrderPackages.java:177)
at com.thortech.xl.dataobj.tcOIU.provision(tcOIU.java:563)
at com.thortech.xl.dataobj.tcOIU.eventPostInsert(tcOIU.java:303)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:602)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at com.thortech.xl.dataobj.tcTableDataObj.save(tcTableDataObj.java:2905)
at com.thortech.xl.dataobj.tcUserProvisionObject.insertImplementation(tcUserProvisionObject.java:283)
at com.thortech.xl.dataobj.tcDataObj.insert(tcDataObj.java:591)
at com.thortech.xl.dataobj.tcDataObj.save(tcDataObj.java:474)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:104)
at oracle.iam.accesspolicy.impl.handlers.provisioning.ProvisionAccountActionHandler.execute(ProvisionAccountActionHandler.java:35)
at sun.reflect.GeneratedMethodAccessor1831.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at oracle.iam.platform.kernel.impl.EventHandlerDynamicProxy.invoke(EventHandlerDynamicProxy.java:30)
at $Proxy284.execute(Unknown Source)
at oracle.iam.platform.kernel.impl.OrchProcessData.runActionEvents(OrchProcessData.java:1035)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:644)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:686)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.notifyParentProcess(OrchestrationEngineImpl.java:828)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:771)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:669)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeChildProcess(OrchestrationEngineImpl.java:751)
at oracle.iam.platform.kernel.impl.OrchProcessData.handleAdditionalChanges(OrchProcessData.java:537)
at oracle.iam.platform.kernel.impl.OrchProcessData.runEvents(OrchProcessData.java:802)
at oracle.iam.platform.kernel.impl.OrchProcessData.executeEvents(OrchProcessData.java:227)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:674)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.resumeProcess(OrchestrationEngineImpl.java:705)
at oracle.iam.platform.kernel.impl.OrhestrationAsyncTask.execute(OrhestrationAsyncTask.java:108)
at oracle.iam.platform.async.impl.TaskExecutor.executeUnmanagedTask(TaskExecutor.java:100)
at oracle.iam.platform.async.impl.TaskExecutor.execute(TaskExecutor.java:70)
at oracle.iam.platform.async.messaging.MessageReceiver.onMessage(MessageReceiver.java:68)
at sun.reflect.GeneratedMethodAccessor2150.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:600)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:148)
at com.bea.core.repackaged.springframework.aop.interceptor.ExposeInvocationInterceptor.invoke(ExposeInvocationInterceptor.java:89)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.doProceed(DelegatingIntroductionInterceptor.java:131)
at com.bea.core.repackaged.springframework.aop.support.DelegatingIntroductionInterceptor.invoke(DelegatingIntroductionInterceptor.java:119)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
at com.bea.core.repackaged.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
at $Proxy382.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:466)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:371)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:327)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)

Kevin,
For manual Proviosioning - It works fine.
It fails when I create user in OIM using flat file GTC . I have an access policy to auto proviosion that user with ldap.
As mentioned before, I notice none of the prepops on Ldap process form are able to read value from Xel user form.
Steps I tried Already:
1- Checking access policy
2-remapping process form adapters
Pls. let me know ur thoughts.
~VSN

User not able to print from SAP

Hi guys,
User is not able to print from SAP. The printer is directly connected to his PC. It is not a network printer. The user is able to print at OS level perfectly. IN SP01, it shows in green and the print job has been completed successfully. I can see the output request. Its all fine in SAP. I am not sure why it is not printing from SAP. Please help ?
Thanks

hi venkata,
did you already defined your printer on SAP Server using tcode SPAD ?
What kind of printing you're using ?
My suggest for simplest one is create new output devices.
Type tcode SPAD
Give simple name
Choose SAPWIN for device type (if you're using WIndows clients)
On Access Method tab
Choose Host Spool Access Method F : Front end Printing or G :
For Host Printer fill with __DEFAULT (remember double underscore)
save and test it.
ardhian
http://sapbasis.wordpress.com

HT204409 I have a MacBook Pro and not able to connect to Internet? PLEASE help!

I have a MacBook Pro and not able to connect to Internet. I have other HP comp and iPad and am able to connect. I have contacted AppleCare....they said disconnect router and leave unplugged for an hour, which I did...still no connection. Any suggestions? Thanks!

Call Apple Care back & tell them their suggestion did not work.
Solution may be found if you search in the "More Like This" section over in the right column.

HT1595 I am not able to connect from my laptop to airplay mirroring equipment, icon is not showing on my laptop.

I am not able to connect from my laptop to airplay mirroring equipment, icon is not showing on my laptop. It does show when I hook up a HDMI wire to the apple TV box.

I think you mean Ethernet, not HDMI wire. If the airplay icon is showing up when wired then that would indicate an issue with your wifi network.

Apex link not able to connect from local machine.

Hi,
Here is the scenario.
I have installed oracle apex 3.2 in my vmware linux machine.
I'm able to connect the link (http://b03apex.domain.com) from my linux(vmware) box but I'm not able to connect from windows local machine.
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?
Need your suggestion.
Thanks, Muhammed.

user9354175 wrote:
I tried to ping the ip, from both the ends are working but not sure why I'm not able to connect from windows local machine.In that case, it means there is network connectivity. The problem is thus something else - like a firewall or name resolution failure.
>
local windows ip: 192.168.1.2
vmware Linux ip address : 192.168.1.3
Do I need to do add any parameters in the Apache logs to connect from windows local machine.?No.
Can you ping the VM hostname from your Windows console (instead of IP address)?
Have you tried in your Windows browser the following URL (using IP address of the VM instead of the hostname)?
http://192.168.1.3/
Have you checked that your browser is not configured to use a proxy server?
Have you checked your Windows firewall for allowing tcp web traffic to the virtual machine?
Have you checked for the same on on the virtual machine (firewall will be likely be done using <i>iptables</i>).

I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

I have a sign of a little lock on the top of my iPhone 4 screen and therefore I am not able to hear from the people who call me unless that I switch the speaker on. What should I do

The little lock has nothing to do with speaker volume. It means you have locked the rotation on your iPhone.
Have you tried using the volume control on the side of the iPhone to raise the volume when someone calls?

I am not able to download from i tunes store the free games to my ipod, does anyone know

i am not able to download from i tunes store the free games to my ipod, does anyone know

mine does the same thing like I tried to download kik and when I went to select apps to sync in my ipod menu it showed up all grey

Hi my name is rachell and im trying to set my brother's new ipod to my computer and it says that im not able to restore from backup because his ipod is to all what can i do? thanks for your help

file://localhost/Users/rachellmarin/Desktop/Photo%20on%202012-12-05%20at%2020.12 %20%232.jpg

I do not understand you question/problem.
What does "not able to restore from backup because his iPod is all" means.
Also, there is no viewable photo in your post.

Ethernet not connecting when resuming from sleep/hibernate

I use my mac (Win7) in clamshell mode quite often, and I leave the cables connected (ethernet, power, display, etc). I have noticed since installing the 3.0 Boot Camp drivers that the ethernet connection is not recognized after resuming from sleep/hibernate. I need to disconnect the cable and re-plug it in for the system to recognize the network. Anyone else seeing this?

Look through Power Options for sleep and network. There should be sleep, low power, etc. And if possible, maybe you can manually update drivers from the vendor (not Apple). And if Windows or your update doesn't work as well, then you can just as easy use Device Manager and "rollback" the last driver upgrade - a great feature. Also, use those Create/Restore Check Points.
I use to have trouble, got tired of having this issue, and bought a new modem to replace my 5 yr old model. Problem gone. Same can happen regarding routers, sometimes a firmware update, but I had one router that had been superceeded by 4th generation and no firmware patch anymore.

X58 Pro-E Not able to resume from S3 (sleep mode)

Similar Messages

Maybe you are looking for