X6 Apps Manager and Battery indicator

Hi, have been using my phone for a few days now. So far it's pretty good. I've only got a few minor problems, but they are annoying me.
1-Battery indicator shows five bars all day, until I turn the phone off and on again and then goes down to three. I did that just now and after a few minutes it went back up to four bars. Is this a common problem?
2-this is for any vodafone users, my vodafone app manager always asks to be updated whenever I go into it, but it's at the latest version. any ideas on how to get it to stop?
Thanks in advance for replies.

mestaton wrote:
Hi, have been using my phone for a few days now. So far it's pretty good. I've only got a few minor problems, but they are annoying me.
1-Battery indicator shows five bars all day, until I turn the phone off and on again and then goes down to three. I did that just now and after a few minutes it went back up to four bars. Is this a common problem?
2-this is for any vodafone users, my vodafone app manager always asks to be updated whenever I go into it, but it's at the latest version. any ideas on how to get it to stop?
Thanks in advance for replies.
For 2 see here:
http://forum.vodafone.co.uk/forum-23/announcement-124-vodafone-app-manager-fix/

Similar Messages

  • Lenovo G510 - power and battery indicator light is always on and fan is working even if it is off

    Battery and Power indicator light is always on even if my laptop is turned off and no charger is plugged in please help me I do not know what to do about this, I had a problem before too about this laptop, it restarts automatically when I shut it down but I already fixed this one, but the power and battery indicator light won't go off. And the fan is working. Hope you can help me. These are my laptop's specs  Mod's Edit: System model added to Subject line to improve visibility / clarity

    Hi Lenovo4g510i5,
    Try to reinstall the energy management and check for the issue,
    Click here for energy management for windows 7.
    Click here for energy management for windows 8.
    Best regards,         
    Ashwin. S

  • Lenovo G510 - power and battery indicator light is always on

    Battery and Power indicator light is always on even if my laptop is turned off and no charger is plugged in please help me I do not know what to do about this, I had a problem before too about this laptop, it restarts automatically when I shut it down but I already fixed this one, but the power and battery indicator light won't go off. Hope you can help me. These are my laptop's specs
    Mod's Edit: System model added to Subject line to improve visibility / clarity

    Hi Lenovo4g510i5,
    Try to reinstall the energy management and check for the issue,
    Click here for energy management for windows 7.
    Click here for energy management for windows 8.
    Best regards,         
    Ashwin. S

  • I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my inf

    I have full membership to CC and have been using it for 4 months. Randomly Photoshop stopped opening jpgs, so I uninstalled and re-installed. Photoshop then stopped working all together. I signed out of the app manager and when I signed back in all my info was gone and only "TRIAL VERSIONS" of CC apps were available. I paid for this software. I need to be able to download it again.

    Wow, Karan Taneja, you've just embarrassed yourself on a worldwide support forum.  Not only is your post ridiculous and completely inappropriate for a technical support forum, but it also shows your ignorance as to whom you think the audience is.  Apple is not here.  It's users, like you. 
    If you would have spent half the time actually reading the Terms of Use of this forum that YOU agreed to by signing up to post, as you did composing that usesless, inappropriate post, you (and the rest of us on this forum) would have been much better off.

  • App Management and Subscription Settings service applications

    Hi,
    I am upgradind SharePoint 2010 services to SharePoint 2013. I have updated UPS, Metadata, Search, Secure Store and now I want to configure App Management and Subscription Settings service applications.
    For all upgraded services I used default IIS pool: 'SharePoint Web Services default'. But now I see that for App Management and Subscription Settings service Mifrosoft uses new iis pools in the configuration guide:
    http://technet.microsoft.com/en-us/library/fp161236(v=office.15).aspx
    Could you please advise if I can use defaulf pool 'SharePoint Web Services default' to configure App Management and Subscription Settings service applications?
    If not can I use one pool for both services or should I use separate pool for each service?
    Thanks

    You cannot move the STS. Also, certain SAs right farm admin rights. If the farm will leverage those SAs, I'd encourage you to create a new App Pool for just those SAs, rather than re-use "SharePoint Web Services Default" (to prevent these SAs from
    running under the Farm Admin).
    http://technet.microsoft.com/en-us/library/cc263445(v=office.14).aspx
    Trevor Seward
    Follow or contact me at...
    &nbsp&nbsp
    This post is my own opinion and does not necessarily reflect the opinion or view of Microsoft, its employees, or other MVPs.

  • 3G issues and battery indicator on ios 6.1

    Since upgraded to iOS 6.1, I can't seems to use 3G in my iphone4s and iPhone5..No matter how many times I tried to turn off and on the 3G from the setting app, it failed to get 3G. I had to restart my iPhone repeatedly to use 3G.
    Also the battery indicator drop drastically after a full recharge. I plug of my iPhone4s and iphone5 from charger and just within few minutes, battery drop to 97%.
    I had to switch off my iPhone and turn it back on then only the battery indicator go back to 100%.

    Hi shldr2thewheel, thanks. But these issues were what Apple said would be solved...these upgrades always disturbe other itens.
    It´s like my last upgrade (to 6.1.2), there wasn´t any note adressed to 3G or Wi-fi connection, but it destroyed them.
    I would like to know if someone had the same problem with Internet connection and battery life and afterward upgrade it to iOS 6.1.3 has got rid of them.
    I will not upgrade to iOS 6.1.3 with no sure about the improvement. There are many people complaining regarding these same issues after 6.1.3.
    Thank you any way.

  • Iphone 5,Facebook app, time and battery % does not display?

    Using iphone 5, Facebook app, why does the time and battery percentage no longer display?

    First, double-tap the home button and then swipe up on the FB app to close it out.  Then, try again.  Second, delete the FB app and then reinstall it and see if that resolves the issue.

  • 6280, Getting HOT and Battery Indicator

    Hi,
    I've discusssed this 'HOT' thing before but the only answer i got was to go 12KM for a Nokia Service Centre.
    Basically after i play a few games and take pictures and make a 40 minute call the phone gets hot, The keypad feels like it's going to blow up into my face!
    And Before anyone suggests a NSC Or taking it back to my nearest 3 store(500 yards away) Is this completly normal for this phone to get hot when using it?
    And the next question!
    The battery Indicator, After i tiny tiny bit of use it currently says battery full, but it says on the 3 network website, 'Manufactures recommend you turn your phone off and on regularly for maximum performance' or what ever it says, Before i turn the phone off the battery is full right? but when i put off then put on when it comes to the homescreen it goes to 1 bar, this is ridiculos and annoying.
    Why can't it show low in the first place? i mean really this is stupid i don't know when to charge the Phone!
    Thanks!
    Nokia N95
    V 20.0.015
    0546553

    Don't tell me you haven't heard about the 3UK branded 6280 that went up in smoke recently...
    The extra heat is usually due to the fact it's being used on a 3G/UTMS network as it requires more power than using a GSM network.
    As you can't lock your handset to GSM (yet another reason I'll never use 3UK), there is not much you can do about it.
    The battery indicator problem is common to most Nokia's I've seen.
    First use the search to see if your question has already been answered...
    Secondly I will not knowingly assist in breaking the forum rules.
    My information is always changing, what I post at the time is usually true.

  • Ingress software or iPhone issue over app crash and battery heating up

    Hi all
    As you know the ingress games requires you to keep the phone while moving around to recharge the XM, and of course that reduce dramatically the battery, so I do carry a battery pack or two.
    Recently, when the phone is kept on for a few hours my iPhone 4s automatically shut down, or even crash the ingress app. and the phone heats up after kept on for over just over 3 hrs, and sometimes beyond this the phone shuts down.
    Does anyone have this battery heating up issues or automatic shutting down after hours of keeping the phone on even connected to a battery pack?

    While on the HOME screen double-press the Home button. The Quick Launch bar will appear on the bottom of the screen. Hold any icon until they all display "-", then tap the "-" on each one until they are all gone.
    Next, reboot the phone by holding the HOME and SLEEP buttons until an Apple logo appears.
    BTW, this assumes your phone is not jailbroken. If it is then that is your problem, and you will have to find solutions somewhere else, as it can't be discussed in an Apple-hosted forum.

  • Nokia Energy Profiler and Battery indicator proble...

    Hi all,
    I have purchased nokia E71, but battery last very short (max. 2 days). I have installed Energy Profiler yo see how much power my phone uses in active anda idle mode and it showed in active: 0.17 and in idle 0.04, the batt. voltage is 3.77 and batt. must last aprox. 110 hours. but phones own indicator shows different it shows only 2 bars and after maybe six hours it's off... Can you give me an advice how can I correct the phones batt. indicator?
    P.S. Sorry for bad English...

    First of all, upgrade your mobile's firmware. For that.. Uninstall Nokia PC Suite and NSU from your PC and restart it. Now download the latest version of Nokia PC Suite and NSU from Nokia website and install it in your PC and restart it again. Now turn off firewall and antivirus software and connect your mobile with PC. Now backup all the data of your mobile using Nokia PC Suite backup utility (for safety, if any problem persist). Switch off your mobile, remove memory card and restart your mobile. Connect it with your PC using original data cable. Now run NSU and do the procedure as written in NSU. Don't run any application in your PC or mobile. Don't touch your mobile untill "successful update" message appear in NSU. After complete the update process, switch off your mobile, insert your memory card and restart. This will solve all firmware bug.
    If you like my post then give me "Kudos" star...

  • Lost Use of App Manager and Updates after Windows 8 install

    I recently purchased Windows 8 and now the Adobe Application Manager will not run on my computer.  In addtion, I am unable to update photoshop and several other CS6 programs.  Does anyone have a fix for this?

    A lot of security updates along with .NET 4.5 should be installed before all programs run correctly on your computer. When Windows updates shows no more updates, then you should be good to go as far I'm guessing.

  • App Manager: Uninstall apps and Re-install when needed?

    I have just installed CS6 Master Collection, can I uninstall some applications (via the App Manager) and then re-install them later when needed?

    Uninstalls are handled via the respective Add or Remove Programs system panel (Win) or by accessing the uininstallers directly (Mac). AAM realyl only handles the download and install, as illogical as that may seem...
    Mylenium

  • 3rd Party Apps won't uninstall or display correctly in App Manager

    I've found that my Razr, like most devices, needs housecleaned every so often to perform at peak.
    I regularly (monthly-ish, or whenever the device seems bogged-down) clear the cache partition, and houseclean the App caches.  Some of them get very cumbersome, and it does seem to help app performance.
    I've noticed that sometimes some apps, randomly (not consistent cuprits, though it seems to be whatever I use most often or whatever moves a lot of data around) don't update in the app manager, and when they're like that, you can't uninstall or do anything with them, even though they run fine.  Fine, but like molasses in January.
    For this, I'm having trouble with Megapolois and Words With Friends.
    Going to the App Manager -> 'All' and going to either app yields all the fields populated by "Computing..."   and it just stays that way.
    I've tried to unistall the app from there, thinking something was just hung-up, and the "Uninstalling.." screen comes up...and the bar moves, and it does nothing.  Forever.  Same when I try to uninstall from the App Store.  App Store -> My Apps -> [App] -> Uninstall.  Circle spins, it says its uninstalling, but 90 minutes later, there we sit. 
    In both cases, I can't back-out of the action.  I can go back to the home screen, but I can't get back to "Manage Apps" or the Play store as appropriate without it going right to that stalled operation in progress.  I have to reboot the phone.
    I've tried in Safe Mode with the same result.
    There must be a way to nuke/reset these apps from the recovery menus somewhere.  How?
    I also have a bunch of apps, Maps for instanance, where I can't clear the cache.  Push the "Clear Cache" button, it lights up blue...and the cache doesn't clear. 
    Suggestions?

    You May Have to Run a Factory Reset are you running the Latest OS 4.1.2 if not I'd run the F.R. followed a System Cache Clear then Update to 4.1.2. if you haven't..

  • Creative Cloud Desktop App Manager never self update correctly

    I have no idea what is wrong with the Adobe Creative Cloud Desktop App Manager. I downloaded and installed it ever since I subscribed to Creative Cloud. EVERY TIME when there is an update to the Creative Cloud Desktop App Manager, it will prompt me to update which I did. However, EVERY TIME the update would fail and I would either have a broken CC Desktop App Manager or, started recently, it would prompt me to update again.
    The only solution I could find was manually uninstall CC Desktop App Manager and then reinstall it.
    Perhaps the CC Desktop App Manager is not needed?

    Creative Cloud chat support (all Creative Cloud customer service issues)
    http://helpx.adobe.com/x-productkb/global/service-ccm.html

  • CS6 was working fine until App Manager failed

    I got a message to run updates on April 18; I obeyed meekly, but the process hung for some unknown reason.  Since then, I have been playing ring-around-rosy with Adobe Support and they seem not to be able to read my chats nor understand on the phone. At first, the entire suite was completely unusable.  I  have since uninstalled; used the clean up tool; uninstalled all prior versions of the Suite (CS4 and CS5, which I still used), and completely reinstalled.  I have deactivated and reactivated; uninstalled, cleaned and reinstalled repeatedly - as demanded by several calls and chats with Adobe Support.  Now, App Manager and Support Advisor both fail - the former with an initialization problem and the latter because it insists on Adobe Air that I have also installed repeatedly but which it does not seem to find.
    Finally discovered that to make MOST of the suite work, I had to manually change all of the various folder and file permissions to force admin execution (even tho I am an admin) AND add security for Trusted Users.  Now, of course, I have to confirm that I want to execute as an admin each time, but that isn't my biggest headache.
    Current HUGE headache is the problem with Acrobat ProX that requires that in order to save as PDF from Word or Excel (which I must do about 10 times an hour), I must
    start Acrobat
    start task manager
    kill both acrobat.exe and acrotray.exe. 
    THIS IS FOR EACH SAVE! [Thanks to the person who suggested this solution on another discussion!]
    I have now updated 2 chats with this problem, but each response refers me (in exactly the same language) to a page that tells one how to solve a different problem for Word 2003 and Acrobat 3 and 7! 
    Any help would be appreciated.

    Judycbarlow the fact that you are having to adjust file permissions could indicate that the permissions for your current User account may have become compromised.  As a test can you please try creating a new local administrator account and see if you face the same difficulties.  Also what version of Windows are you using?

Maybe you are looking for

  • Field Heading in F4IF_INT_TABLE_VALUE_REQUEST

    Dear all, I am calling function F4IF_INT_TABLE_VALUE_REQUEST on F4 help request. Values are fetched and shown as desired, but how should I name the fields? Suppose the output field is MATNR, then the fieldname should read 'Material' but as of now its

  • Mini DV Camcorder Has Sound Drop off When Recording to Tape

    I'm wondering what my correct a problem with a camcorder... audio seems to stop recording after 45-50 min. Model PV-DV530. Would setting to NTSC Firewire Basic.

  • Problem using field symbols in Query...

    Hi, I am fetching the name of the table and field which I will be using in the query using field symbols. But it gives syntax error... select single OBJECTTABLE OBJECTFIELD into help_numtab from Zobjectname where OBJECTNAME  = P_OBJECT. field-symbols

  • Help!  I bought iLife 08, but it won't put iMovie on my laptop

    How can I download an older version of iMovie that WOULD work on my G4? What version should it be?

  • L7590 problem printing first page

    When I print on my new L7590 AIO printer, the first page has problems (e.g., streaking or washed-out lines). Later pages do not exhibit this problem. The same thing occurs when I print self-diagnostic pages: the first page has problems, yet later pri