X6 bluetooth headset will no longer hear calls

I've been using this with full sucess since July but my headset will only listen to music now.  If i try to make a call it ignores the headset and works on handset, reverting to headset for music when the call is over!  I have a spare controller and tried that, exactly the same, headphone directly into phone jack, same thing.
HELP

Exactly same issue with me from around 2-3 months. The problem is not only with headset but also with BT car kit. Able to stream music but no call.
If someone has any sort of solution, plssss help ASAP

Similar Messages

  • Apple bluetooth headset will no long charge with 2.0.1!

    So today I decided to update my iPhone (3G), I noticed that my Apple bluetooth headset was low on charge so I plugged in my headset to be told that "This accessory is not compatible with this iphone"!
    Not only did apple screw me on the shape of the new iPhone stopping me using the dock for my bluetooth headset but they have now stopped me from charging my headset with my phone! I am now officially going back to my old iPhone.

    Hello Kai.dean,
    Out of curiosity... I just tried mine, and its working just fine.
    Wonder what's up with yours not working?
    I'm using the "travel" cable that came with the Appple Bluetooth (since the 3G does not fit into the base any longer) and no problems at all? Charging... and still shows up on the 3G screen.
    I was able to make calls using my Apple Bluetooth, 3G, and the new 2.0.1 software.
    Doug

  • Bluetooth Headset will not work following upgrade of PC desktop software

    Recently I updated my laptop with the latest desktop software in order to allow synchronization between Microsoft Office 2010 and my blackberry tour.
    The sync works!
    But now that I have upgraded, I am having a problem with my bluetooth headset.
    After syncing my phone to my PC over bluetooth, my bluetooth headset connects to the phone ok but when you try to use it no sound comes through either the headset ear piece or the phone.
    So if you try and dial a number, the phone rings where you are calling but you cannot hear the ringing or the person on the other end once they have answered it.
    To correct the problem you have to remove the battery from the phone.   Then once you replace the battery and wait 5 - 7 minutes for the phone to re-initialize the headset works just fine.   Until the next time you sync the phone with the laptop of course.   Then the headset stops working again.
    I have tried deleting all the bluetooth devices from the phone and re-connecting them.  Does not help.
    Anyone else seeing this problem?
    This is my 2nd blackberry.   My 1st was a Perl on T-Mobile. Never had a problem.   But this tour from verizon has be a problem from the start.    Think my next phone is likely to be anything but blackberry!

    Hello ralpha,
    I would suggest you back up your BlackBerry data and clear the Bluetooth Options database. Re-Pair your headset and try making calls again.
    KB10167 will show you how to clear individual databases.
    Let me know how you make out.
    -HMthePirate
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • IPhone Bluetooth Headset will occasionally not connect?

    Sometimes I turn the bluetooth headset on and it makes the four rising tones indicating it is turning on, but the phone does not recognize it and it does not connect. It takes MULTIPLE tries to get it to connect sometimes. Other times it works flawlessly. Anyone have any insight on this?

    Once you power it on, you hear the 4 rising tones... once you've heard that then you need to click the button once more and you will hear a single beep.
    This beep will make the Headset icon show up on your iPhone. If you don't click the button after it powers on, it doesn't always connect immediatly.

  • Does  anyone know what kind of bluetooth headset will work on my Powerbook?

    Hi,
    I just found out that my LG headset will not wirk with my bluetooth 1.1+EDR hardware. Does anyone know what will?
    Thanks

    Hello,
    Thanks for the responce.
    I was hoping for a wireless headset for easy to use on the road with out bluky cables.

  • What Bluetooth headset will work with my Bravia KD-65X9000B TV

    I want to buy some wireless headset for my 4k TV , but I don't know what to get and more importantly what will wok. I don't want to spend much money and I want to connect two headsets..please help.

    Hello! First of all, the model number KD-65X900B does not match with the SONY models number actually, maybe your panel is the XBR-65X900B. So, according to my investment, this product is only compatible with a few Bluetooth device, for example a Mice bluetooth, you can find more info right here: http://docs.esupport.sony.com/imanual/NA/2014/XBR-55_65X900B/uc_uen/c_gset_bluetooth.html By the way, you may consider to buy the MDR-RF985RK, Wireless Radio Frequency Headphones, those one will be compatible for sure, due to you may connect them into headphone input jack of your new brand TV. Hope it works! Sam

  • HT201401 I am so frustrated!!!! My iphone 4s will no longer show caller id when a call is waiting, and it won't answer the call either.  I need to disconnect from first call and wait for call to come through without knowing id.  Help!!! I see no solutions

    My iphone 4s will not answer call waiting.  When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it!  Caller id does not show up during an existing call and the call waiting cannot be ansered.  Can anyone help???

    My iphone 4s will not answer call waiting.  When I go into settings there does not appear to be the option to enable call waiting, yet I have had it for a year and had no problem with it!  Caller id does not show up during an existing call and the call waiting cannot be ansered.  Can anyone help???

  • "iPad Air II WiFi Only" Bluetooth Connected - Will Not Do Test call

    I have iOS 8. How do I complete this essential step in enabling me to Skype a family member? I do not want to use Skype telephone calling.

    When u tink u ar inportant u will be discriminate by almigthy god pls not dat we all at inportant tenx to all my fance

  • Bluetooth headset no longer work after latest update

    I use a Plantronics Voyager Pro bluetooth headset for Skype calling and Ventrillo on my Macbook Pro. Since after the latest update, it no longer works. Both input and output doesn't work and the applications hang for about 30 seconds. I've tried re-pairing the device to no avail. Both applications work if I switch them to the built-in microphone.
    I also tried doing the same thing with a Plantronics 245 and I get the same issue.
    Both headset work with my phone.

    FIXED!!!!
    Steps to UNF*ing your Mac.
    1) Install an app called Pacifist
    2) Download the individual installer for the Magic Touch Update here: http://support.apple.com/kb/DL1066 DO NOT INSTALL THIS
    3) Load your OSX Install DVD
    4) Open the MagicTrackpadMultiTouchUpd1.0.dmg in Pacifist
    5) Open your OSX Installer DVD in Pacifist
    6) Look at the MagicTrackpadMultiTouchUpd1.0.dmg package in Pacifist to see exactly what it installed and where.
    7) Find these SAME EXACT FILES on the OSX Installer and reinstall them as root (e.g. using your admin password when asked)
    8) Repair permissions (Do NOT skip this)
    9) Reboot
    10) MOST IMPORTANT: Never install the update again!!
    Your bluetooth headset will work in skype after this. You will replace EVERY FILE THE MagicTrackpadMultiTouchUpd1.0.dmg package installed with one from the DVD. If you can not find it, the search bar in Pacifist works wonders.
    You will get an error if you try to reinstall admin.framework about not having permission to install. This will be the ONLY file you will not reinstall.
    Yes, you have more or less, in a very complicated fashion uninstalled the update (software update shows the Magic Touch update as needed afterwards).
    Find me on Skype, where I will be able to walk you through it from my Plantronics Voyager Pro bluetooth headset at james.t.bolin
    In case you developers want to know, I'll give you my play by play. After the installation of the update, it borked the bluetooth causing Skype to freeze. Reinstalling all the original kexts from the installer disk fixed the skype freezing issue, but there was still no audio. In fact, after reinstalling everything in the System>Library folder still left me with no audio, but it would not freeze or cause kernel panics at this point.
    This is where I got the magic. I started replacing stuff in the usr directory. Upon replacing the usr>libexec>cups>backend>bluetooth; usr>libexec>hidd; usr>sbin>blued; and the blue.8 and hidd.8 files, I got audio back and the stars aligned in perfect harmony. I suspect apple needs to retool the kexts and rewrite the root level profiles.

  • Iphone bluetooth headset won't answer

    anyone have this problem?
    i wouldn't call my bluetooth headset "dead", but when a call comes through and i push the botton at the top, it no longer connects me to the caller. i can't hear them, although they claim to be able to hear me. i have to call them back in order to have a converstation.
    i bought it at the apple store online back in may/june. if i bring it to the apple store, will they give me a new one?
    twon

    Hello Joolader. Posted below is an Article that seems based on what it is your doing. I have also posted a couple other articles along with Damon's, As well as some additional troubleshooting steps.
    iPhone and iPhone Bluetooth Headset: About auto-pairing http://docs.info.apple.com/article.html?artnum=305665
    iPhone Bluetooth Headset troubleshooting http://docs.info.apple.com/article.html?artnum=305777
    How to pair iPhone Bluetooth Headset http://docs.info.apple.com/article.html?artnum=305664
    Additional Troubleshooting.
    1. Turn iPhone off then back on. Simply hold down the Sleep/Wake button and slide to power off, When the screen turns dark. Press the Sleep/Wake Button for 3 seconds till you see an Apple Logo. Once the iPhone boots backup, Now try Bluetooth again.
    2. Reboot the iPhone. Press Sleep/Wake and Home button together, Let go once you see Apple Logo. iPhone will Reboot and come back, Now test Bluetooth
    3.Go to Settings- Toggle Airport Mode on, Then Off, Retest Bluetooth
    4.Go to Settings- General-Reset-Reset Network Settings, Retest Bluetooth
    5. Now that we covered all the basic settings without touching data. If you still can not get Bluetooth to work try the last couple steps.
    6. Find another Bluetooth headset see if the iPhone sees it.
    7.Backup your Data, Restore iPhone, Test Bluetooth
    If this all fails. Take your iPhone and Bluetooth headset to an Apple Retail store, Where they can attempt a couple more last min troubleshooting steps on iPhone.
    If another Bluetooth works with your iPhone then you had a Bluetooth headset issue. But taking your Bluetooth headset into Apple Retail will allow them to test it on other iPhones to rule out an issue with your hardware.
    Please book an appointment at your local store before going in.
    http://www.apple.com/retail/

  • Motorola H300 bluetooth headset and 3.0

    I have a Motorola H300 bluetooth headset. It pairs and shows as connected with my Iphone 3G S. However, it works only with the phone. I understood that the new 3.0 OS would allow bluetooth devices to work with the IPod functions also. Am I correct? Any suggestions as what may be wrong?

    I have a hands free earpiece headset I've been using for months. It would stay connected and in standby mode until a call came in — one touch and it would answer a call. I recently got a Insignia stereo Bluetooth headset in anticipation of 3.0 and they work great.
    The problem is my hands free earpiece headset also picks up the stereo from the iPod. This headset, will no longer go into standby because it's always connected. I can't listen to my iPod in my car and keep the earpiece on standby as in the past. I now have to completely shut off the earpiece just to listen to music through my car stereo. When a call comes in I have to boot up the earpiece. This takes longer, and while driving, more distracting.
    Any ideas on how to keep the iPhone from playing the iPod through my hands free telephone earpiece?

  • Can anybody actually RECOMMEND a bluetooth headset for the iPhone?

    I see a lot of bad experiences, & not too many good ones.
    Can anybody actually RECOMMEND a bluetooth headset for the iPhone? I just need one that works, with very little features (ie: redial button on headset).

    I've actually posted another thread, and I don't mean to take over the original members post, but I'm hoping this will help others who may be having the same problems. Thanks to all of you who have posted your results with the various headsets!
    I am now on my third iPhone 3G in under six months. The first one would drop calls when the corded Apple headset was plugged in during the call, and the second would cause the caller on the other end to hear an echo when I used the Apple headset. Plus, it did not respond well at all to Bluetooth headsets. Tons of static, call echoes, and noise cancellation not working.
    My experience with the Jawbone 2 has been disappointing. I have heard way too many testimonials of satisfied iPhone users who love the JB2, so I'm beginning to think it's just me. I went through FOUR Jawbone 2 devices in under a month, all because of poor sound quality, and the Noise Assassin not working properly.
    The white rubber tip sat very well against my cheek, and the default medium earpiece fit perfectly in my ear and was very comfortable to wear. Everything seemed to be in order, but the same problems would arise over and over again. I would get poor sound quality on both ends of the call, and people could hear the tv or the radio playing in the background on my end.
    Maybe the structure of my head isn't suited for the JB2, but I have a very normally proportioned head. I refuse to believe it's the device——It has been rated highly by too many people to be the issue. I've all but given up on it, regrettably.
    The Plantronics Discovery 665 I tested had issues with static. I would hear it on my end, even thought the phone was no more than two feet away.
    I'll give the Plantronics 925 a try, as well as the Blue Ant V1. We'll see...

  • Which bluetooth headset works well with iPhone

    I was very happy with a Plantronics bluetooth headset for a long time, until it broke. Now I have tested three Plantonics bluetooth sets with my iPhone4 and all had connection problems, which I never had with my Android phone. People keep saying "I can't hear you" unless I put the iPhone in front of my mouth. I don't know why. So, which bluetooth headset have worked well for you with your iPhone?

    there are 2 types of bluetooth headsets
    the traditional headset which is typical mono and connect to 1 ear and only do phone calls
    then there is the a2dp which is typical stereo and play all audio also games, video and music
    a2dp is typical bigger being stereo and all and often cost more

  • Anyone know how to fix Bluetooth headset not working properly after iOS 8 update?

    I have an iPhone 5S and I use a Plantronics PLT M20 model bluetooth headset. I am no longer able to answer calls by pressing the button on the headset, since updating to iOS 8. I also also cannot end calls by pressing the button on the headset. This only happened after iOS 8. The Apple Care rep stated that "this is most likely a problem with the bluetooth manufacturer and they need to update their firmware, so now it's just a waiting game until they do that". Is that correct? Anyone encountering this?
    Related information....
    Hi - I'm a student with disabilities and rely heavily on accessibility features that make my life easier. For example, I use a Bluetooth headset to trying answer phone calls and use Siri… I especially use the "Raise to speak" option for accessing Siri. Since updating my iPhone five us and my iPad air, I've been scrambling to access the "raise to speak" option for Siri without success. When I called AppleCare, the representative stated I should have that option to enable in my settings. When I explained to her that the option is not showing, she wanted me to reset my phone to factory settings. When I told her I googled the issue and found that it may have been removed in iOS 8… She put me on hold, Came back and told me I was right.
    What's worse is that that my Bluetooth headset is no longer working with my iPhone 5S. She stated that it may being I needed adjustment from the manufacturer of the headset– Plantronics. All I know is that the apple care representatives seem confused and I am extremely disappointed in this really impacts my use of Siri and my phone.
    When I asked her to submit feedback to her supervisor or the powers that be… I was simply asked to submit feedback to the Apple.com website. While I understand Apple might read that feedback, I also recognize that they don't reply and I don't feel that is great support to someone like me who has a disability and needs a solution. The"Hey Siri" option is not working for me.
    Does anyone have any workarounds for the "Raise to speak" problem or the Bluetooth problem? Specifically, the Bluetooth issue is when I try to hit the button on my Bluetooth headset to answer a call or end the call. It's a Plantronics PLT M20 model.

    Follow-up to my earlier post that iPhone 6 Bluetooth not working correctly.  I purchased a Jawbone MiniJambox to use as a speaker phone in my office.  Everyone in our company thinks they are the best.  However, it is experiencing the same issues as with all my other Bluetooth headsets.  Everything works except cannot answer or hang up calls pushing the buttons on the Bluetooth devices.  The Bluetooth patio speakers in our courtyard also have the same issue.  However, my colleagues using iPhone 5 and 5s who did not update to iOS8 are using all Bluetooth devices without any issues.  Apple says it is a problem with my Bluetooth device.  Come on Apple.... This makes 7 different Bluetooth devices with different manufacturers.  You cannot possibly believe the problem is with the Bluetooth devices when iOS7 works perfectly fine...
    On another issue, my iPhone 5s worked perfectly fine in my vehicle entertainment center connected via USB.  The vehicle entertainment center had complete control of my iPhone and iTunes.  However, now I plug in my new iPhone 6 and it no longer communicates with my vehicle entertainment center.  Again when I called Apple, they said my vehicle entertainment center needed a firmware update.  Are you kidding me...  That is a bunch of BS...!!!

  • Wifi degrades when using Bluetooth headset

    I've noticed that when I use my Bluetooth headset (Sony Ericsson HBH PV-700) with my iPhone, the wifi (airport extreme) degrades or stops working. If I switch back to speakerphone or iPhone, them wifi starts working again. The PV-700 is only Bluetooth 1.1... perhaps iPhone requires 2.0 ?

    k.alexander - thanks for posting. It's a relief to hear that another headset exhibits the same issue. Alas, it's also disappointing. The thing I most wanted to do with my iPhone was talk using Bluetooth and surf using wifi. I'm guessing it’s a proximity issue - both the Bluetooth and the wifi signals are emitted from the phone at the bottom through the black plastic. I upgraded to the iPhone from a Sony Ericcson z525a. I had no issues using Bluetooth to talk on it while simultaneously surfing on a laptop connected via wifi. Hopefully the Apple Bluetooth headset will be designed to get around this apparent limitation…
    eMac 1 GHz   Mac OS X (10.4.10)  

Maybe you are looking for