X6 Camera won't work but video will.

I can take video's fine but when I change to image mode the screen is black and if I take a picture it throws me out of camera and back to the main screen.
I had it in for repair as I was cleaning the line along the top and stopped the touch screen from working. I am told that should not affect the camera.
Is there something I can do or am I going to have to trek back to the shop (not so local).....
Thanks

Try restoring the camera settings.. If it didn't work, restore the phone settings.. If it too didn't work, format the phone by dialing *#7370#. If it too didn't work, do a hard reset by switching on the phone by pressing call button, call end button and camera button(it will erase pre installed softwares too! And, in order to do this you should hold those switches until you see the logo of NOKIA).. I hope it will solve your problem....
If i have helped , kudo me by clicking the white star in left side!

Similar Messages

  • Firefox won't work but Safari will???

    Firefox won't work but Safari will?
    Firefox was already loaded on my macbook pro but won't work??

    Firefox doesn't come preloaded on new Mac's.
    So you must have gotten this machine used and the person set up Firefox with a proxy amongst other "tweaks" that your not aware of, possibly even remote access to your machine.
    If this is a used machine you bought, ideally it would be best to backup any files you have to a external drive, c boot off the installer disk the other person should have given you and use Disk Utility > Erase > Zero and format the drive HFS+ Journaled. Quit and install OS X and start with a fresh machine.
    If you don't have the disk, a $29 Snow Leopard install disk is avaialble from Apple (no iLife programs, sold seperatly) which you can do the same as above.
    If you don't want to do this, then delete Firefox and it's Library > Application Support > Firefox folder and reinstall it fresh from Mozilla.
    Just reinstalling Firefox alone doesn't work, the support files need to be trashed as well.

  • Music sound won't play but video will

    I have had my 80 GB ipid video for only a couple of weeks now and it was working perfectly fine until the other day when the sound quit on me. I could sometimes hear a scratching noise, but most of the time I don't hear anything. The sound on my videos works fine though, and I can't find anything else wrong. I have tried to reset, restore the settings, and any other advice I could find, but nothing has worked. Please help!!

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • My internet won't work but skype will

    I have tried both wired and wireless connections.  It says connected but my browsers and ichat will not open, however Skype will connect and even let me video chat.  I am running on Snow leopard on a 2010 macbook pro.
    I have tried using diagnostics, but to no avail, it cannot find a problem.  I have tried to ping, but there is no connection.  I do not have access to the modem, I just plug the ethernet into the wall.
    Help help help help!!  I am out of ideas!!!

    Do you have a choice of more than one wireless network?  If you hold down an "option" key when you pull down the AirPort menu bar item, what value do you see for "RSSI"?

  • DVD drive won't work but it will burn disk?

    imac 2.4Ghz - 10.5.8
    For sometime now my DVD drive spits out Cd's/DVDs as soon as I put it in. Strange thing is, it will let me put blank media in and will allow me to burn disks.
    It's getting really annoying now as can't do so many things I need to do.
    I want to upgrade to Snow leopard but until this is sorted I can't. I know I can attach an external drive or replace it but I need to know that I've covered all areas before resorting to this.
    Wondering if an upgrade caused this possibly?
    Would be very grateful for any help anyone can give me?
    Many thanks

    Hello kfq
    Welcome to Apple Support Communities
    1. Check and clean those CDs and DVDs, SuperDrives are picky and don't like dirty, filmy, scratched, warped, out of balance media with labels on them!
    2. Check the Apple > System Preferences > CDs & DVDs to make sure that they were set correctly. To include toggling/re-setting them to something else and back, forcing the system to re-write the preferences.
    3. Download the 10.5.8 Combo Update from the following Apple Support page and install it over the top of the current 10.5.8 > http://support.apple.com/kb/DL866
    Dennis

  • Mac wireless internet won't work, but PC will. Help??

    I recently joined a sorority and whenever I am at my sorority house studying, it takes my macbook pro an average of a half an hour to connect to the wireless internet. When it finally connects, it seems random. I cannot figure out what makes it suddenly work. Sometimes I wait so long for it to connect that I am forced to give up. Other girls who live in the house have some issues, but not as many as me and the girls who have PCs don't have any issues. Again, the girls who own PCs don't have ANY issues with the wireless internet. Also, my internet works fine on campus, in my apartment, at my parents house, etc...
    Because I don't have any control over the internet I don't know what kind of router it is or anything, which I know would be helpful. However this just seems like such a specific problem that I was wondering if anybody had any ideas to make it work. I've gone through the network diagnostics numerous times and have done what I can within the network preferences.
    I'm supposed to live in the house in the fall. Someone please help!
    Thanks!
    Paige

    Do you have a choice of more than one wireless network?  If you hold down an "option" key when you pull down the AirPort menu bar item, what value do you see for "RSSI"?

  • Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?

    Front face camera won't work for pictures. But it works perfectly on FaceTime, any way of fixing this?
    When I try and change the camera to face front it acts like it's going to change then kind of freezes and won't let me change back to the back camera for several minutes.
    Any ways of fixing this?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                             
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                       

  • My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air

    My app store won't work on my iPod Touch 4gen running on ios 6.1.5 and when I open app store it says "cannot connect to iTunes Store" i shut my ipod down and turned it back on but it still dosn't work but it will open on my Mac Book Air. If sombody could tell me how to fix this that would be awesome!

    Can't connect to the iTunes Store

  • My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    My iPod camera won't work. The shutter doesn't open at all. I backed up and restored my iPod but it didn't make it work. Now I'm so mad and confused. Please help.

    If you restored to factory settings/new iPod via iTunes (Not via Settings>General>Reset>Erase all Content and Setting) and still have the problem that indicates a hardware problem.
    Make an appointment at the Genius Bar of an Apple store..
    Apple Retail Store - Genius Bar

  • When unlocking my iphone with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos and control the volume.  Anyone else notice this?

    When unlocking my iphone 5 with the camera slide, my volume controls won't work on video playbacks.  However, if I unlock the phone normally and open the camera roll I am able to watch my videos with the control of the volume.  Anyone else notice this?
    Thank you.

    Who can help me what are the symbols of a moon and a lock with a partial circle around it not allowing me to turn on or off my phone

  • When I hover over the Bookmark Icon for a few seconds it won't work but when I go straight to the icon and click on it, it will work. Running windows 7

    When I hover over the Bookmark Icon for a few seconds it won’t work but when I go straight to the icon and click on it, it will work. Running Windows 7.

    Try:                                               
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try another cable       
    - Try on another computer                            
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar                                     

  • Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    Ever since I installed MAVERICK, nothing now works, Flash Player won't run, printer works but scanner will not and the computer runs so slow.  Any help anywhere?

    wqn02h, first thing I would do is use Disk utility to repair permissions. Once this is done. Make sure you have the latest versions of the software you use. Also, check the manufacter of your printer/scanner for updated software. If they don't have updated software there are 3rd party alternatives that will work.
    Paul

  • I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome

    I can open the web site (Chemistry) but the links within won't work, however they will in Google Chrome.

    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    * Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove the Cookies" from sites causing problems:
    * Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    * Don't make any changes on the Safe mode start window.
    * https://support.mozilla.com/kb/Safe+Mode
    * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

  • My Ipod 4th generations Camera won't work, how do I fix it?

    My Ipod 4th generations Camera won't work, how do I fix it?

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up                                                                
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Camera won't work. Newbie here.

    Hi guys I have just joined this forum and I wonder if you could help sort out my camera that say's .. "Could not start the camera. Close other applications and try opening the camera again."
    I've already tried wiping all my applications on Blackberry Curve 8520 still the same. Then I tried, putting my fone on safe mode same same. Then lastly I tried the 'Alt key + lglg" to see the event logs after I choose 'Clear Logs' and this what entails..
    Min Log Level is in 'Warning'
    a System - JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03 and when I clicked this..
    Name: System
    Severity: Always Logged
    GUID: 97c9f5f641d25e5f
    Time: Nov 14, 2013 12;28:07
    JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
    Next is ..
    W System - Overlay released (deleted) at index: 5
    Name: System
    Severity: Warning
    GUID: 97c9f5f641d25e5f
    Time: Nov 14, 2013 12;27:53
    Overlay released (deleted) at index: 5
    w System - New overlay at index:5
    Name: System
    Severity: Warning
    GUID: 97c9f5f641d25e5f
    Time: Nov 14, 2013 12;27:53
    New overlay at index: 5
    W System - PMEU 1037
    Name: System
    Severity: Warning
    GUID: 97c9f5f641d25e5f
    Time: Nov 14, 2013 12;27:53
    PMEU 1037
    a net.rim.memclean - FrmF
    Name: net.rim.memclean
    Severity: Always Logged
    GUID: cb039f26e560f62d
    Time: Nov 14, 2013 12;27:53
    FrmF
    a net.rim.memclean - FrmF
    Name: net.rim.memclean
    Severity: Always Logged
    GUID: cb039f26e560f62d
    Time: Nov 14, 2013 12;27:53
    a System - JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
    Name: System
    Severity: Always Logged
    GUID: 97c9f5f641d25e5f
    Time: Nov 14, 2013 12;28:07
    JVM: INFOp=286e737e,a='5.0.0.681',o='5.2.0.67',h=8c000f03
    All of these are on my event logs and still my cam won't work. Please help me with this.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

Maybe you are looking for

  • How to display Error message in USEREXIT_NUMBER_RANGE ?

    Hi All, - We are using subroutine USEREXIT_NUMBER_RANGE in include RV60AFZZ to override the existing number range. - For this, we have created a maintenance view, where number ranges are stored w.r.t Sales Org and Billing document type. - If a number

  • Problem with MIR6

    Dear Guys I have posted and parked an invoice but when I used the transaction MIR6 to display the invoices against particular document numbers, the line items are getting missed completely but some times half line items are displaying and some times

  • Sending photos from a nokia n73 to my macbook and saving them

    hi. this is my first mac iv only had it for 2 days. i would realy appreciate if someone could help me. i would like too put the photos from my n73 in my mac. i have not the faintest idea where to start

  • Boot Mac Mini w/Bluetooth without Keyboard/Mouse attachted

    Hi, I´m trying to boot a Mac Mini with Bluetooth without any Keyboard/Mouse attachted to it. It doesn´t work. Every time the Mac stucks at looking for Bluetooth devices. Running 10.4.11 Any ideas? Thanks a lot, seb

  • Conditional branching in OSB

    Hi, I wan to use conditional branching in OSB for a WSDL WS.I am not able to use operationl branching because the method names and request message names are different. I want to do conditional branching based on operations or request messages. For ex