X6 display gets stuck / frozen
I' ve faced this problem lately where X6 device touch display gets stuck, and no touch input is possible. Usually this happens when the phone has been idle or in the pocket for a while, i'd say once in 2 days. Physical keys still seem to be working. I need to disconnect the battery to get the display working again. Timewise this started happening after last firmware update.(V 30.0.003) (Not sure about first incident, cannot remember.) Anyone else suffering with the same problem.
Should i take my device to Nokia maintenance?
Seems to be..
Refer this.
http://searchwarp.com/swa652337-Capacitive-Phone-Touch-Screen-Maintenance.htm
..though it mentions only about high temperatures.. also says ideal range 0 - 35 degree C
--------------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...
Similar Messages
-
I was editing photos and it was getting stuck or frozen and working very slowly. I attempted to restart the computer but it would not allow me to quit aperture. Now aperture appears in my toolbar but will not open up so I can work on any photos. Any ideas?
Did you try opening from the Applications folder?
Depending on how far that gets you, I would also take a look at the Troubleshooting Basics. -
my iphone5 has keypad issue which is getting stuck and the display starts blinking the phone doesn't respond until it's turned off n switched on what might be the solution ???
Close all open apps by double-tapping the home button, then swiping up and off the screen with the app window (not the smaller icon).
Reset your device: hold down the home button along with the sleep/wake button until the screen goes black and you see the Apple, then let go. (No data loss) -
After watching a youtube video in fullscreen on my Macbook pro, the display goes black and my laptop get stuck...
And I need to reboot everything from the power button...
It's just the second time it happens. What it depends from?Hello DarlinDodson,
I'd recommend taking a look through the following article that can help get your MacBook working with your TV again.
Apple computers: Troubleshooting issues with video on internal or external displays
http://support.apple.com/kb/HT1573
Cheers,
Allen -
My iPhoto seems to be frozen. I was importing a photo and it seemed to get stuck .
my iPhoto seems to be frozen. I was importing a photo and it seemed to get stuck .
With the amount of information you've provided it's impossible to offer a potential solution. We can't see your computer so we need to know the details of your problem and setup, i.e.:
what version of iPhoto are you using?
what system version are you running?
importing from where?
what fixes have you tried?
where is your library located?
did you apply any updates or upgrades just prior to the problem occurring?
are you running a "managed" or "referenced" library?
what type of Mac?
how much free space on your boot drive?
OT -
download photoshop cc and it get stuck at 2% - DSL Download at 6 Mbps - How big is this program and why is it frozen at 2%
Jimk88 I would recommend reviewing the download logs to determine the exact error. You can find details on how to locate the download logs at Error downloading Creative Cloud applications - http://helpx.adobe.com/creative-cloud/kb/error-downloading-cc-apps.html.
-
New documents get stuck at top of 2nd display only in First Class app and mavericks
I've read a lot of the discussions about windows getting stuck in the left corner, etc. My problem is slightly different.
I seem to have a unique problem. I am running 10.9.2 Mavericks and have an hdmi cable connecting my tv as a 2nd display (extended desktop).
We use First Class as our LMS, and I will frequently have a window open on the 2nd display (random) and get "stuck" at the top of the screen.
It doesn't seem to matter what the display settings are. The bar with the close/max/min buttons is not showing, so I cannot drag the window anyplace. The only way I've found to unstick it is to change the display setting for the second display and then move the window. sometimes this will happen each time I open a window in F.C., and sometimes it stops. The display settings don't seem to matter, except that when I change them (only for the 2nd display), the window unsticks. Thoughts?That is because you don't make any attempt to clear the old list and repopulate it, you just make a new one and add it in. Try making a constructor that creates your GUI then just add, clear, and otherwise manipulate the objects/lists in the GUI--you don't need new ones.
-
Syncing iPad to iTunes is getting stuck and frozen
I am running into a problem when trying to sync my iPad 1 to iTunes. It backs up of but gets stuck on the last stage, "Waiting for changes to be applied". I had been able to sync fine until loading iOS5. Does anyone have any idea how to clear this up?
iOS5 downloads safari browsing data during the sync process. This might be the cause. Go to Settings/Safari/Advanced/Website Data and delete everything.
I suspect this sync bug could be addressed in the upcoming 5.0.1 update. -
My pc gets stuck and frozen when i try to disconnect
its already a few days now that i try to log out from my itunes account,and when i press the log out button my computer gets stuck and freeze.is there someone out there that can help me to solve the prob..thanx
i am sorry to say but there is no way to undo a software update to go back you have to go threw your phone provider and have then do a replacement on the phone and just not do the update. when they receive the phone they will send it off for testing and to have the bugs fixed
-
My iPod 5th generation is stuck on the lock screen and I tried restarting it 4 times and it continues to get stuck on the lock screen. What do I do.
Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar -
SuPM home page getting stuck and couldnt able to enter
Dear All,
Greetings....
we are not able to enter into SuPM home page and getting stuck while its loading.. due this cause, we have installed flashplayer_10_ax_debug (No flash player exist earlier).
Now while loading SuPM home page in Portal, its displaying..
Adobe Flash Player 10
An Action Script error has occured
TypeError: Error #1009: Cannot access a property or method of a null object reference.
at com.sap.xapps.analytics.sr.material.command::MaterialGetListCommand/onServiceLocatorResult()
at com.sap.mvc.control.events::Callbacks/onResult()
at com.sap.xapps.analytics.sr.business::WebServiceFactory/resultHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.rpc::AbstractService/dispatchEvent()
at mx.rpc::AbstractOperation/http://www.adobe.com/2006/flex/mx/internal::dispatchRpcEvent()
at mx.rpc::AbstractInvoker/http://www.adobe.com/2006/flex/mx/internal::resultHandler()
at mx.rpc::Responder/result()
at mx.rpc::AsyncRequest/acknowledge()
at DirectHTTPMessageResponder/completeHandler()
at flash.events::EventDispatcher/dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at flash.net::URLLoader/onComplete()
[Dismiss All] [Continue]
i tried even by giving both options but still same issue.
Please help.
Regards,
NagarjunaHi Nagarjuna
The flex UI for SuPM is sturctured within the SUPM Portal packages OPMFNDUI and ANASUSTUI,so please re check whether you have installed the correct SuPM portal packages from service marketplace.
Since I see some webservice related message in the log please re check the following post installation step in the installation guide :
Configuring SAP UI Framework Web Service Proxies (look for the authorization details also).
If you still get problem during loading the SuPM UI through portal please go to NW administrator and view the error log.
Thanks
Debraj Roy
RIG APPS -
Ipad app store is getting stuck and will not let me puchase any apps or books
My ipad app store is getting stuck. I can not purchase any apps or books. It works for a few seconds and then freezes.
iPad Frozen? How to Force Quit an App, Reset or Restart Your iPad
http://ipadacademy.com/2010/11/ipad-frozen-how-to-force-quit-an-app-reset-or-res tart-your-ipad
If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
If that doesn't work:
• Log out of your iTunes store account. Go to Settings > Store > Sign Out Then press the Home button.
• Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
• After restart, the Waiting should be gone.
Cheers, Tom -
Here is a script I am using to export recordings made with EyeTV. My problem is when the script is triggered from EyeTV when the recording is done it works just fine. If I run the script as a stand alone app on a selected recording it gets stuck at the CheckMultiplePIDs subroutine. I put a display dialog before and after the "set logdata to every paragraph of input_text" line and only the first dialog box shows and nothing obvious is happening. I tried to take out the non-relevant code to make things a little easier to read. If you want to see all the code I can post that.
-- Run the python MarkCommercials script for the given recording
-- this must be run with the RecordingStarted script
-- it will check if there were multiple PIDs for the recording and runs MarkCommercials for each pid
-- requires updated MarkCommercials which allows specifying the pid
-- by Ben Blake, September 2009
global LogMsg
on RecordingDone(recordingID)
set LogMsg to ""
CheckMultiplePIDs(recordingID)
--display dialog "in RecordingDone" & recordingID
--disable this if you do not want a logfile written
end recordingdone
-- one more edit for plex export, only section below.
on readFile(unixPath)
set foo to (open for access (unixPath))
set txt to (read foo for (get eof foo))
close access foo
return txt
end readFile
-- testing code: this will not be called when triggered from EyeTV, but only when the script is run as a stand-alone script
on run
tell application "EyeTV"
set selectedRecordings to selection of programs window
repeat with theRecording in selectedRecordings
--display dialog "theRecording ID " & (get unique ID of theRecording as integer)
set recordingID to unique ID of theRecording as integer
my RecordingDone(recordingID)
end repeat
end tell
end run
on CheckMultiplePIDs(recordingID)
--check if there are multiple Video PIDs in the file
tell application "EyeTV"
set input_text to my read_from_file((path to "logs" as string) & "ETVComskip" & ":" & recordingID & "_comskip.log")
if (count of (input_text as string)) > 0 then
set logdata to every paragraph of input_text
set logdata_lastrow to (item ((count of logdata) - 1) of logdata) as string
if (items 1 thru 19 of logdata_lastrow) as string = "Video PID not found" then
--multiple Video PIDs, rerun MarkCommercials until successful
set recrdingIDInteger to recordingID as integer
set rec to recording id recrdingIDInteger
set LogMsg to "RecordingDone found multiple PIDs for recording ID: " & recordingID & ", Channel " & (channel number of rec) & " - " & (title of rec)
set PIDs to (items 44 thru ((count of logdata_lastrow) - 2) of logdata_lastrow) as string
set delims to AppleScript's text item delimiters
set AppleScript's text item delimiters to ", "
set PID_List to {}
set PID_List to every word of PIDs
set AppleScript's text item delimiters to delims
repeat with pid in PID_List
my launchComSkip(recordingID, pid)
repeat while (my mcIsRunning())
delay 5
end repeat
end repeat
end if
end if
end tell
end CheckMultiplePIDs
on read_from_file(target_file)
--return the contents of the given file
set fileRef to (open for access (target_file))
set txt to (read fileRef for (get eof fileRef) as «class utf8»)
close access fileRef
return txt
end read_from_file
on write_to_file(this_data, target_file, append_data)
--from <a class="jive-link-external-small" href="http://www.apple.com/applescript/sbrt/sbrt-09.html">http://www.apple.com/applescript/sbrt/sbrt-09.html</a>
try
set the target_file to the target_file as string
set the open_target_file to open for access file target_file with write permission
if append_data is false then set eof of the open_target_file to 0
write this_data to the open_target_file starting at eof
close access the open_target_file
return true
on error
try
close access file target_file
end try
return false
end try
end write_to_file
on launchComSkip(recID, pid)
if pid = "" then
set cmd to "'/Library/Application Support/ETVComskip/MarkCommercials.app/Contents/MacOS/MarkCommercials' --force --log " & recID & " &> /dev/null &"
else
set cmd to "'/Library/Application Support/ETVComskip/MarkCommercials.app/Contents/MacOS/MarkCommercials' --force --log " & recID & " --pid=" & pid & " &> /dev/null &"
end if
do shell script cmd
end launchComSkip
on mcIsRunning()
set processPaths to do shell script "ps -xww | awk -F/ 'NF >2' | awk -F/ '{print $NF}' | awk -F '-' '{print $1}' "
return (processPaths contains "MarkCommercials")
end mcIsRunning
--Subroutine to remove troublesome characters
to parseout(stringtoparse)
set illegals to (ASCII character of 60) & (ASCII character of 62) & (ASCII character of 58) & (ASCII character of 34) & (ASCII character of 47) & (ASCII character of 92) & (ASCII character of 124)
repeat with i from 1 to count (illegals)
set testletter to (text i thru i of illegals)
set the_offset to 1
repeat
set the_offset to offset of testletter in stringtoparse
if the_offset > 0 then
set stringtoparse to (text 1 thru (the_offset - 1) of stringtoparse) & "_" & (text (the_offset + 1) thru -1 of stringtoparse)
else
exit repeat
end if
end repeat
end repeat
return stringtoparse
end parseoutWhile this isn't a solution, you could write lots of output to a log file. You should eventually see where it is stalling out. I use textwrangle to look at the log file while it is running.
the code escape is. Notice the tag is the same for start & end:
your code here
Here is my log program.
Write debug text to the file /debugLog.txt
example
--- debug on Friday, February 11, 2011 2:23:20 PM ---
start program.
thePath = Macintosh-HD:
End of program.
fyi:
The applescript log statements are ignored when not run from the script editor.
on run
-- thePath points to the folder in which to create the debug log.
global thePath, firstRunning
(* Use the path to clause to create a generalized path statements *)
set thePath to (path to startup disk as string)
set firstRunning to ""
-- Write a message into the applescript editor event log.
log " --- Starting on " & ((current date) as string) & " --- "
debug("start program. ")
Your program here...
debug("thePath = " & thePath)
debug("End of program. ")
end run
on appendToFile(fileId, theData)
local theSize, writeWhere
set theSize to (get eof fileId)
set writeWhere to theSize + 1 as integer
write theData to fileId starting at writeWhere
end appendToFile
-- based on log by James Reynolds, 12.18.2000, University of Utah
on debug(theMessage)
global thePath, firstRunning
local theSize, startupDiskName, pathToLog, fileReference
set pathToLog to (thePath & "debugLog.txt")
try
set fileReference to (open for access file pathToLog ¬
with write permission)
log "firstRunning = " & firstRunning
set theSize to (get eof fileReference)
if firstRunning = "" then
set theSize to (get eof fileReference)
log "theSize = " & theSize
if theSize is equal to 0 then
appendToFile(fileReference, "New log created on " & ((current date) as string) & " " & return)
end if
appendToFile(fileReference, " --- debug on " & ((current date) as string) & " --- " & return)
set firstRunning to "running"
end if
appendToFile(fileReference, theMessage & return)
close access fileReference
tell application "Finder"
set the creator type of the file pathToLog ¬
to "R*ch"
end tell
on error mes
try
log " We got an error when writing to " & mes
close access fileReference
end try
end try
end debug
Robert -
Here are a few more details. I put in a game cd for a windows computer, once I opened the folder on the desktop I noticed the install application was .exe so I tried to eject the cd but no matter what I tried on the computer it wouldn't come out. I will say though that I didn't try the manual cd eject cause I didn't have anything small to hit the button in the cd drive with. It was getting late so we decided to just turn off the computer and leave it for the next day. I can't remember if we turned the computer off with apple shut down or by holding down the power button but we walked away pretty quickly before it was fully shut down. The next day the computer won't turn on. When I walked into the room I was the computer stuck with a grey background with the apple logo showing and the circular thing under it frozen. Since no one was in the room I held down the power button and turned the computer off. We tried to start the computer again later but again it keeps getting stuck at the same spot. Now when we hold the power button down to turn it off I'm not sure if it's really turning off all the way. The screen goes dark but it sounds like the fan is still going. I tried disconnecting everything but the keyboard and mouse but when I started it up again it got stuck on the grey screen with just the apple logo. I'd really apprechiate help on this cause I live in Germany right now and support call centers work so much worse when you don't speak the language well... Thanks for any help you can give!
Restart your computer while holding down left mouse key. That will eject the CD and your Mac will start as normal.
Lupunus -
W510 Solid State Drive (SSD) Gets Stuck Causing BSoD. Why?
Hey guys, this has been a problem for a while now, and it is really mind boggling ... I have a Lenovo ThinkPad W510 laptop with a 256GB Crucial M4 SSD drive. Ever so randomly the drive just hangs, the LED light that the drive is trying to load something stays "ON" for up to 5 minutes or so before it finally goes into a Blue Screen of Death (BSoD). Once it goes into BSoD the laptop reboots and it gets stuck on the ThinkPad motherboard logo, eventually it will display "ERROR 2100: HDD0 (Hard Disk Drive) initialization error (X)" Where X is usually 1 or 2, sometimes 3 but rarely. It will not function again until I physically turn it off and back on using the power button.
A little bit of background about the problem, this is my 3rd Crucial 256GB M4 SSD, Crucial has been very helpful and they went as far as replacing the drive twice, i am starting to highly doubt its a drive issue, I think it could be something from the laptop itself. To be more clear, my laptop has also been serviced back in March (Motherboard was swapped as well as keyboard), parts failure. It was all done in very timely manner and everything was OK after the swap.
A representative from Crucial told me that this is a classical problem with the SATA controller driver handling TRIM, he said the drive is getting stuck in an infinite TRIM state which causes the BSoD, after that the drive goes into some sort of a "panic" mode to protect itself and doesn't function again until a full power cycle. (thus the need to turn off and then on the laptop) he also added it could be fixed by installing the correct SATA controller driver.
I have tried to use the default windows SATA controller driver, and I have tried to use the Intel one too, and it seems to happen less often with the windows drivers, but overall, it happens at least once a day. It is really frustrating and I am not able to get anywhere with it.
Any help or advice is highly appreciated. I am considering getting rid of the Crucial SSD altogether and just using Intel SSD instead, but I am really doubtful that it is the SSD's fault especially that its the 3rd one I use. I also know a couple of friends who own ThinkPads with Crucial M4 SSD inside them, and they seem to be working very well for them.
Thanks in advance,
Al.Hi again,
Ok so I have applied the fix you have mentioned above, and it did improve (lower) the frequency of the problem happening. It really improved a lot significantly when I uninstalled the Intel drivers and used the Windows 7 built in SATA controller drivers.
However, ... it still happens ... less frequent, but it still takes place, my SSD still gets stuck at least once in 3 days now, or once in 2 days (after severe testing) and the same scenario happens. I am really stuck at this point, and not sure which direction to take.
Any help would really be appreciated, if you have / know any method to debug the BSoD's I get and a way to locate the source of the problem I am willing to go through it 1 by 1 and solve this problem before deciding to finally just giving up on the drive altogether.
Sincerely,
Al.
Maybe you are looking for
-
Adding New SAP System in System Configuration
Hi i want to add a new system in Portal i follow the path system administration -- system configuration -- portal content -- <my folder> -- < add system template > i can successfully do this in the objects i have maintained Connector where i have giv
-
In Bridge and Elements Organizer 4.0 I can simply select a photo and drag and drop the image into Premiere Pro 2.0. It is a very handy feature when having to work with a lot of photos in videos. In Lightroom this functionality seems to be lost. Is th
-
XSLT Mapping - Unable to find resource
Hi all, We upgraded our XI system and tried to test one of our well-running scenarios and found the following error for most of the XSLT mappings. <br> <b>Unable to find resource mapping.xsl</b> <br> But I found that the runtime cache contains the
-
How to link EKBE and MKPF tables
HI all plz help me, how to link EKBE and MKPF tables thanks ramesh redddy
-
Removing apps from purchase list
I Want to know hoe to remove apps completely inClaudine the purchased list.