X6 errors, now it won't even start anymore

Hei!
I've had the X6 now for about a month and a half and while I was updating the software something went wrong. It couldn't reinstall the backup.
Ever since that moment my phone has been doing weird stuff.. The touchscreen sometimes doesn't respond or just fades away and the phone restarts.
I get errormessages that the memorycard can't be found (I have the 32gb version) and properties disappear.
Now the phone won't even start when I have my simcard inserted. It gives the error message 'Selftest failed, contact the reseller'.
I can't do anything with it, the message disappears when I take out the battery but when I start it up again the same message appears..
Who can help me? It's really urgent!

A hard reset (x6, 5800 and 5230 only) is done by the following (warning, this deletes all data on your phone):
1.) Turn off the phone and remove battery for 5min
2.) Reinsert battery
3.) Press and hold the green, red and camera buttons. DO NOT LET GO.
4.) While holding the three buttons, press the power key to boot the phone up.
5.) Keep on pressing until you see the country selection screen.
A correctly done hard reset would show you that everything on the phone (contacts, messages, calendar entries, etc) would be deleted. So it is advisable to back them up. Upon restoration, do not restore settings or files if possible.
If you find my post helpful please click the green star on the left under the avatar. Thanks.

Similar Messages

T61 - Blue screen error message (nv4_disp) - Now computer won't even start!

Hi I have a Lenovo T61 (Type: 7662-CTO) Windows XP.
A couple days ago, all of sudden my screen turned in a yellowish hue, started flickering intensely and froze; I had to manually shut it off (by pushing the power button).
Next day, I started my computer and it worked fine until I had the exact same flickering and freezing issue, but this time, the screen didn't turn in a yellowish hue. Once again, I manually shut it off and went to bed.
This morning, however, when I started my computer, my screen went totally blank, though I could hear my computer running. I hooked it up to my TV to see if anything comes up and that's when I got this blue screen of error message.
It says:
================================================================================
Problem has been detected and windows has been shut down to prevent damage to your computer.
Problem seems to be caused by the following file: nv4_disp
If this is the first time you’ve seen this stop error screen, restart your computer.
If this screen appears again, follow these steps:
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
Technical information:
** STOP: 0x000000EA (0x8A4803C8, 0x88FFD500, 0xBA4EFCBC, 0x00000001)
nv4_disp
beginning dump of physical memory
physical memory dump complete.
contact your system administrator or technical support group for further assistance.
==================================================================================
It would show this blue screen very briefly and rebooted by itself (without letting me log in windows), so I had to once again manually shut it off.
I thought perhaps cleaning a fan might help, so I opened up my laptop, cleaned the fan, keyboard, palm rest etc and assembled it back together.
When I turned on my computer, now I'm getting NOTHING. Not even a blue screen. Computer would start, but very briefly after (just a few seconds after), it would just shut it off by itself.
Someone please tell me what's wrong with my computer and if I can revive it at all.
Also, would you recommend me to bring it to the local Lenovo repair center (http://bplocator.lenovo.com/)?
Thanks so much for reading a long message.

marissa07, welcome to the forum,
marissa07 wrote:
......snip..
================================================================================
The device driver got stuck in an infinite loop. This usually indicates problem with the device itself or with the device driver programming the hardware incorrectly.
Please check with your hardware device vendor for any driver updates.
==================================================================================
Have you tried updating your graphics driver?
Error message in Windows XP: "STOP 0x000000EA THREAD_STUCK_IN_DEVICE_DRIVER"
You can find the latest driver for your system here. Another option would be to run ThinkVantage System Update, which is hopefully on your system, if not you can find it here.
I'm not saying this is the solution or ruling out a hardware problem, (which the flickering suggests), but it's a good place to start
Let us know
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

My Macbook Pro crashed and now it won't even start up.

I have had my Macbook Pro for 3 years now and in the first 2.5 years I never had any problems, however in the past 6 months it has crashed at least 5 times. The most recent crash being today. Usually when it crashes I'll give it a moment and then turn it on again, everything would work as normal, but today I tried to restart it and nothing happened. I tried various times but everytime my laptop wont even make a noise.
(Side note: the battery was at 90% so its not that the battery ran out.)

Try a SMC reset:
http://support.apple.com/kb/ht3964
(these symptoms may indicate that an SMC reset may be necessary:
The computer doesn't respond to the power button when pressed.)

FCP won't even start anymore!

I just recently installed FCP studio 5 on my computer and began working on some of my projects. However, when I got a new external hard drive and moved some of the captured files over to it, FCP suddenly quit and I have yet to sucdessfully open it again. I tried uninstalling it completely and reinstalling it, but nothing seems to help. It stops loading about 10 seconds after I open it, and then quits. Help!?!

Trash your preferences. You may use a nice little freeware app called FCP Rescue to do so, you'll find it at:
http://fcprescue.andersholck.com/
That should do nicely Sir.

Itunes update would not install due to an error, now itunes won't run and I get this message when I try to launch itunes: "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem"

itunes update would not install due to an error, now itunes won't run and I get this error message when I try to launch itunes: iTunes.exe - Unable to Locate Component "This application has failed to start because MSVCR80.dll was not found. Re-installing the application may fix this problem."
I'm on a Dell PC running Vista Home Premium.
HELP!!!!!!!!!!!!!!!!!!!

try removing all itunes and all other apple program
follow this link for more info. http://support.apple.com/kb/HT1923
reboot ur window after uninstalling
after that download the latest itunes setup and install.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work.

My iTunes won't update, it starts to install then just says it can't. I decided to try uninstall it but it won't even uninstall anymore, there is some type of ERROR going on. I tried to just install iTunes from the website and that won't even work. I'm using a Windows Vista.

Hi there,
I've got a couple of articles that may help you out. This first one goes over how to properly remove and reinstall iTunes.
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/HT1923
This next one goes over some of the troubleshooting steps if you are having issues reinstalling iTunes.
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Hope that helps,
Griff W.

My CS6 Indesign has quit several times and now won't even open anymore, how can I get it to work?

My CS6 Indesign has quit several times and now won't even open anymore, how can I get it to work again? I need it back asap!!

Start by emptying the InDesign Recovery folder.

Won't even start

My MBP which is just over a year old won't even start up now, I press 'Power' then it tries but just switches itself off.
Recently i started noticing that it was not charging properly as well.
Since I am out of warranty will it be a long costly procedure to determine the problem?
Your thoughts please.
Thanks.

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!

I updated my Macbook Pro last week to Lion. I went to go import pictures from a memory card to my iPhoto, but only a portion of them loaded before my iPhoto froze and I had to Force Quit it. Now iPhoto won't even open... Help!
Please! I need an answer fast!!!!

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Keeps saying damaged library. i have uninstalled and installed, deleted files and sent files to recycle. nothing works and now itunes won't even open.

i have repeatedly received the message that the itunes library is not valid and is damaged. i have uninstalled itunes between 6-8 times, sent files to recycled and still get the message. now, it won't even open....

Have you tried the procedure here?
How to recreate your iTunes Library
If not, that might do the job for you.
Regards.

Downloaded Itunes8 and now it won't even acknowledge my ipod

Hi,
I downloaded Itunes8 and now it won't even acknowledge my ipod. The computer just makes a bum bum noise (kinda like Law and Order) and my ipod shows up nowhere. How do I handle this?

Try Resetting your iPod while it's connected to the computer. Hold down the MENU and SELECT (centre) buttons for five or ten seconds until you see the Apple logo appear: How to reset an iPod

GTA Vice City won't even start?

So i just downloaded GTA vice city and it took enough to install so when it finished i tried to start it and at the same second it turns on and then off, basiclly won't even start. Has anyone gotten the app already and tried it out? Maybe solution for my problem?

It's possible you simply have a defective battery. Try going down to your local Apple Store and try one of their batteries in your MBP. If it works then simply replace it.

Ever since I got the new update 5.1 my iPod's been dying faster. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason(even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? lagging too

Ever since I got the new update 5.1 my iPod's been dying faster, even after I charge it. It used to last for at least 3 hours, now it won't even last one hour and dies for no reason (even when it's in sleep mode, and not in use) What's wrong with it? Is it the update? It's lagging as well..

Some Users have Reported that a Restore as New has helped Resolve issues...
Backup and Set Up as New Device
http://support.apple.com/kb/HT4137

Download won't even start (Adobe Flashplayer)

Hello, I am using Macbook Pro - Lion Version 10.8.2. I have tried downloading/uninstalling the previous version and downloading again. But the download for the latest Adobe Flashplayer won't even start. The page just loads but the download does not start. I tried restarting my com and did all that's said in the forum.. But it seem I'm the only one facing this problem. I have made sure that I'm downloading the correct version for it, just FYI. Any one knows how I can solve it? Thanks!

Can you check to see if you have "enable plug-ins" checked in Safari's preferences dialog, under the security tab? If not, enable it and check.
It seems to be a browser specific issue. Try a different browser like chrome or firefox, it should work.
For fixing Safari, lets follow below suggestions :
Run the Flash Player Uninstaller as applicable for your machine(i.e.Windows or MAC) and remove flash player.
For MAC : http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Restart the machine.
Download and Re-install Flash Player.
Restart the browser and check.
[Moved the discussion to Flash Player Forum]

X6 errors, now it won't even start anymore

Similar Messages

Maybe you are looking for