X6 firmware update to V40 installation - fail loop...

Hi
My Nokia X6 16GB will not update to V40 through Ovi, Nokia Suite or PC Suite.
The phone knows the V40 update is availablefor but wont let me update OTA as it wants me to use the PC to update which is where the problem begins;
Ovi suite knows it needs V40 as well and gets as far as doing the backup, it detects a USB connection then gets in an endless loop where it loses then gains the USB connection (you have to press next everytime).
PC Suite doesn't work at all
Nokia Suite - occasionally connects and it can see the update but loses the connection almost immediatley between it and the phone and I have to start again (the phoen itself remains connected to the PC. Nokia Suite also does some strange things to the screen, which ciorrupts 50% of the time but is cured if repaired only to fail again. No joy on that count
I have tried every possible combination of reloading, wiping, deleting the various nokia elements etc etc. Ovi gets me closest and is the most stable of all the suite's but still wont finsih the job
I'm at my wits end. Geniuses please step forward
Cheers Grayzza
PC is Core 2 Quad, W7 Home Prem 64 SP1, 4GB RAM. All drivers up to date, no viruses.

Hi Farby
Thanks for this, however despite disabling virus/firewall etc no success.
Nokia SUite is up to date
Software Updater loads but gets stuck on install stage so no success with that either.
So I still can't get past the looping USB lost/USB connected phase when installing V40. However, I was able to update MAPs throught Nokia Suite with no problem. Weird
Any other solutions you can think of?
Cheers
Grayzza

Similar Messages

Having a constant error when downloading latest update for Illustrator CC, error message: Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

Having a constant error when downloading latest update for Illustrator CC, error message:
Adobe Illustrator CC Latest Updates (December 2014) Installation failed. Error Code: U44M1P7

U44.. update error http://forums.adobe.com/thread/1289956 may help
-more U44.. discussion http://forums.adobe.com/thread/1275963
-http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html
-http://helpx.adobe.com/creative-suite/kb/error-u44m1i210-installing-updates-ccm.html

HT201274 I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

I was in the middle of a restore on my Ipad 2 and lost internet connection about 2/3 of the way through the firmware update, and now it fails everytime I try to restore. It says ERROR 2. Can anyone help?

Resolve specific iTunes update and restore errors - Support - Apple
Configure your security software
Related errors: 2, 4, 6, 9, 1000, 1611, 9006, 9807, 9844. Sometimes as a result of this issue, a device might stop responding during the restore process.
Check your security software and settings, which can block ports and prevent connection to Apple servers during update and restore.

Tried to update to mavericks, installation failed.

I tried to update to Mavericks installation failed. I cmnd r, erased disk reinstalled ML online. Macbook will restart in safe mode only. The start up ding is clearly audible and the sound device is recognized in system report. But system settings shows "no output device found". Video is super slow. I have reinstalled ML for the second time with the same results. I cannot access diagnostics with the "d" key at start up and have ran out of options. My MBP is a 2.66 Ghz intell core 2 duo 4GB and was working great before the attempt to upgrade. Help! thanks.

Read this thread.
https://discussions.apple.com/message/22935993#22935993
Linc Davis is a very smart guy on here, and his recommendation in that thread is to reinstall the OS. I'd suggest a backup first.

N78 Firmware update to 30.011 fails ("nmwcdnsu.sys...

hi together,
i have still a big problem with updating to the latest firmware from version 21.002 to version 30.011.
while update process is starting a windows pops up and a cd is requested (-> Nokia USB Flashing installation Disk) containing "nmwcdnsu.sys" file, which i do not have!!!
-> please find attachment.
and then everytime update fails, i think due to this missing sys-file.
all this is done with the nokia software update tool and usb data cable connected.
this is the first time for me having such problems with firmware-updates.
and by the way, a firmware-update is not shown or provided when i use the phone asking directly for the latest firmware from the device-manager-info-overview (is not supposed to be available, tells the display me after connected to the nokia server...).
thanks a lot for hints and tips.
regards from germany
sascha
Solved!
Go to Solution.
Attachments:
0728.jpg ‏30 KB

hi guys,
i got the meaning of nsu a few seconds later when i had already posted the reply...
the issue is now solved. but the nsu needs some fixes!
i will inform the nokia carecenter in germany.
i reinstalled the very nice and faulty tool "nsu" (with win xp-restart/reboot) and gave him several times manually the destination-folder from these/some requested specific *.sys-files, which the tool obviously does not know the installation-folder (Connectivity Cable Driver folder). and then it was successful.
thank you very much guys.
greets
sascha

Mountain Lion (10.8.5) Security Update 2014-003 installation fails

Hello,
I tried to install the new Security Update for Mountain Lion (2014-003) and received an error message at the end of the installation process a la:
"The installation failed". The Installation fails because of an error. Please contact your vendor (roughly translated from German).
So I didn't found anything on the web to these issue. I remember a similar problem by the last security update too. So now I'm a little bit concerned regarding a virus or something else on my iMac.
May anybody could help, please?
Here my machine data:
iMac May 2011, 3,1 GHz, Core 5, 12 GB RAM
1 TB HDD w/ 3 Partitions (1x Mac, 1x Data, 1x BootCamp WIN 7)
Free storage on Partition 1: 111 GB, 2: 133 GB, 3: ?
Mac OS X 10.8.5
Something missed?
Kind regards
Frank

Disable anti virus softwrare if installed
Check firewall options in System Preferences > Security & Privacy > Firewall > Firewall Options
Make sure Gatekeeper is enabled
Open System Preferences > Security & Privacy then select the General tab.
Make sure either Mac App Store or Mac App Store and identified developers is selected. If that area is grayed out, click the padlock icon to proceed.
OS X: About Gatekeeper

CS Live Services Update for CS5 - Installation Failed

Hello,
When applying the latest updates using the AAM, I receive the following error: "Some updates failed to install - CS Live Services Update for CS 5 - Installation failed.
In the install log, the summary lists
the following
- 0 fatal error(s), 3 error(s), 0 warning(s)
ERROR: 5 Command ARKPatchCommand failed.
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul: Install failed
The complete log is below.
I have tried 2 additional times, including a restart, to to avail.
Thoughts on what to do?
Thanks,
Daniel Ledingham
START - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
RIBS version: 3.0.122.0
OSX version: 10.5.8
::START TIMER:: [Total Timer]
CHECK: Single instance running
CHECK : Credentials
Load Deployment File
deploymentFile option not given
Create Required Folders
Assuming install mode
Looking up install source path
Sync Media DB ...
::START TIMER:: [Sync Media DB]
Pre check media db sync
End of Pre check media db sync. Exit code: 0
:: END TIMER :: [Sync Media DB] took 55 miliseconds (0.055 seconds)
Ready to initialize session to start with ...
::START TIMER:: [CreatePayloadSession]
-------------------- BEGIN - Updating Media Sources - BEGIN --------------------
Updated source path: /Users/dledingham/Library/Caches/Adobe/AAMUpdater/AdobeCSXSInfrastructureCS5-2/2.0.1
Updating media info for: {273F2A32-EC95-4AF7-BF26-EF4A57368DC9}
Ignoring original data since install source is local
Type: 0, Volume Order: 1, Media Name: CSXSInfrastructure
Path: /Users/dledingham/Library/Caches/Adobe/AAMUpdater/AdobeCSXSInfrastructureCS5-2/2.0.1/payl oads/AdobeCSXSInfrastructure2-mul-050810112728/AdobeCSXSInfrastructure2-mul-050810112728.d mg
-------------------- END - Updating Media Sources - END --------------------
[       0] Tue Aug 24 11:08:54 2010 INFO
Supported RIBS version range: [0.0.66.0,3.0.122.0]
----------------- CreatePayloadSession: machine is x86 ---------------
[       0] Tue Aug 24 11:08:55 2010 INFO
______ Verify Dependency Subscribers ______
Overwrite property "extensionsOnly" to: 1
Overwrite property "mode" to: silent
Overwrite property "patchesOnly" to: 1
Overwrite property "workflow" to: updater
Found payload actions:
Deciding what installer mode to use...
BEGIN Setting requested payload actions
Value returned on lookup of payload: {273F2A32-EC95-4AF7-BF26-EF4A57368DC9} Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul is: false
Action string for {273F2A32-EC95-4AF7-BF26-EF4A57368DC9} Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul is install
END Setting requested payload actions
Collected advanced path check information for INSTALLDIR
INSTALLDIR is a well-formed path
INSTALLDIR is not the root path
INSTALLDIR is on a local volume
INSTALLDIR is on a writable volume
INSTALLDIR is not on a case sensitive volume
INSTALLDIR passed path basic path validation: /Library/Application Support/Adobe/CS5ServiceManager
::START TIMER:: [System check :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In InstallPreSystemCheckProc
Custom action return code: 0
:: END TIMER :: [System check :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 2 miliseconds (0.002 seconds)
[       0] Tue Aug 24 11:08:56 2010 INFO
Payloads passed preflight validation.
Call PreSession Custom Hook
::START TIMER:: [Pre session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In InstallSessionOpenProc
Custom action return code: 0
:: END TIMER :: [Pre session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 0 miliseconds (0 seconds)
Calling the custom action code for pre-install for payload {273F2A32-EC95-4AF7-BF26-EF4A57368DC9}
::START TIMER:: [Pre payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In PrePayloadInstallProc
Custom action return code: 0
:: END TIMER :: [Pre payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 0 miliseconds (0 seconds)
::START TIMER:: [Payload Operation :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
[       1] Tue Aug 24 11:08:56 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Installer Operation: PayloadInstaller
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
Request to install payload
[       1] Tue Aug 24 11:08:57 2010 INFO
CustomizedPatch property not found in database
Beginning installation for payload at /tmp/.tempdirfBtHyPlu/Install.db
[       1] Tue Aug 24 11:08:57 2010 ERROR
5 Command ARKPatchCommand failed.
[       1] Tue Aug 24 11:08:57 2010 INFO
Completing installation for payload at /tmp/.tempdirfBtHyPlu/Install.db
[       0] Tue Aug 24 11:08:58 2010 INFO
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=* Operation complete. Setting status: 2 =*=*=*=*=*=*=*=*=*=*=*=*=*
:: END TIMER :: [Payload Operation :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 2093 miliseconds (2.093 seconds) DTR = 1.91113 KBPS (0.00186634 MBPS)
User specified overrideFile:
Calling the ROLLBACK custom action code for pre-install for payload {273F2A32-EC95-4AF7-BF26-EF4A57368DC9} Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul
::START TIMER:: [Pre payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In PrePayloadInstallProc
Custom action return code: 0
:: END TIMER :: [Pre payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 0 miliseconds (0 seconds)
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was removed. ARP estimated size 0KB
[       0] Tue Aug 24 11:09:00 2010 INFO
Total components installed: 0
Total components repaired: 0
Total components removed: 0
[       0] Tue Aug 24 11:09:00 2010 ERROR
The following payload errors were found during install:
- Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul: Install failed
[       0] Tue Aug 24 11:09:00 2010 INFO
Call PostSession Custom Hook
::START TIMER:: [Post session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In InstallSessionCloseProc
Custom action return code: 0
:: END TIMER :: [Post session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 0 miliseconds (0 seconds)
:: END TIMER :: [Total Timer] took 12276 miliseconds (12.276 seconds) DTR = 0.977517 KBPS (0.000954607 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 3 error(s), 0 warning(s)
ERROR: 5 Command ARKPatchCommand failed.
ERROR: The following payload errors were found during install:
ERROR: - Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul: Install failed
Search the same string above to find when the error occured.
Exit Code: 7 - Unable to complete Silent workflow
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*

Hello Vineet,
I did a complete uninstall (including the CS5 Clean Tool) and reinstalled MC CS5. I ran the updater and everything seems to have updated properly. Thanks for your help. I was holding off on the reinstall because of the time involved with reconfiguring the apps, reinstalling plugins, etc.
Looking at the installer log, there appears to be some permissions related entries that were not present in logs of the failed installs. Here is the relevant section of the log.
::START TIMER:: [Post payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In PostPayloadInstallProc
Logged in userid (501)
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/cache' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/configuration' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/extensions' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/logs' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/preference' to '501'
Changed Owner of '/Users/dledingham/Library/Application Support/Adobe/CS5ServiceManager/StageManager' to '501'
Custom action return code: 0
:: END TIMER :: [Post payload :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 3 miliseconds (0.003 seconds)
No operation. We're done:
Updating driver data - Action: Remove driver entry
Updating driver data successful. Driver entry was added. ARP estimated size 1053KB
[       0] Wed Sep 1 12:51:48 2010 INFO
Successfully installed 1 component:
- Adobe CSXS Infrastructure CS5_2.0.1_AdobeCSXSInfrastructure2-mul
Total components repaired: 0
Total components removed: 0
Call PostSession Custom Hook
::START TIMER:: [Post session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}]
In InstallSessionCloseProc
Custom action return code: 0
:: END TIMER :: [Post session :{273F2A32-EC95-4AF7-BF26-EF4A57368DC9}] took 0 miliseconds (0 seconds)
:: END TIMER :: [Total Timer] took 11917 miliseconds (11.917 seconds) DTR = 58.404 KBPS (0.0570351 MBPS)
-------------------------------------- Summary --------------------------------------
- 0 fatal error(s), 0 error(s), 0 warning(s)
Exit Code: 0 - No error
*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*=*
END - Installer Session
I did run a permissions repair using the Disk Utility before downloading and installing the updates. I don't know if that helps, but I thought I'd include it.
Thank you,
Daniel Ledingham

Activation and Firmware update on ATV 3G failing

Hi all,
I just purchased an ATV 3G and it is running 5.1. I actually just swapped the unit out where I had a 2G. (Moving the 2G to a vacation home)
So, I keep trying to update the FW and it kees failing. I've tried about 5 times. In each case:
The firmware downloads, It then goes to Step 1 preparing update. The progress bar completes on that Step and then I get a message that the Firmware update was not successful and it tells me how I can restart the unit.
When I go into Settings-General-About it shows the Activation as Failed (Skipped). I am hoping that this is related to the Firmware problem.
After these problems, I put my ATV 2G back and I was able to get it to update its firmware. (From 5.1.1)
After the 2G updated, I then put the 3G back and it failed again. (I used the same power, HDMI and ethernet cable for both, so it isn't a cabling problem)
I have no idea on how to troubleshoot these issues.
Any help/advice would be greatly appreciated.
Thanks,

Welcome to the Apple Community.
If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
Connect the micro USB cable to the Apple TV and to your computer.
Reconnect the power cable (only for Apple TV 3)
Open iTunes.
Select your Apple TV in the Devices list, and then click Restore.

Firmware Update 4.2.8 Fails on PowerMac G4

Hello,
Concerning a Powermac G4 running 9.2.2 & attempting to upgrade to 10.3 (which requires the firmware update):
Removed all attachments except mouse, monitor and keyboard.
Ran firmware update 4.2.8 (for 2 x 450 mHz PPC AGP Graphics Powermac G4).
Restarted with "programmer's button" held in.
Tone sounded; Mac starts to boot into the update.
The folder flashes a question mark for a second, then looks like it has engaged (the screen goes blank for a second as if it were beginning to boot as usual).
The flashing question mark then appears again and remains on-screen indefinitely, requiring a manual restart with "option" key to boot into 9.2.2, at which point a message appears saying that the firmware update has not been installed.
In other words, whatever the firmware's trying to do, it isn't doing because (so it appears) it can't find the system folder.
I MUST install OS 10.3 IMMEDIATELY.
PLEASE HELP ASAP

Hi, amacproblem -
...what else would it have been set to?
It could have been set to a CD; or Network Disk (some OS 9.2..x installs leave it set to that for some reason); or nothing.
Although that firmware update has not been reported as checking for incompatible RAM before updating the firmware, it is possible that could be an issue. To check for that, download and run DIMM First Aid - it's a small program and takes just a few seconds to perform some basic checks on RAM; it can also repair some sub-spec RAM modules so that they are in compliance.

EFI firmware update 1.1 installation on Intel Xserve running 10.5.3

When I recently attempted to install EFI firmware update 1.1 on an Intel Xserve running MacOSX 10.5.3, the software installer indicated that the computer did not need this update. However, the machine's current boot ROM version (XS11.0080.B01) is earlier than that apparently associated with the new firmware (XS21.006C.B06). Is this to be expected?

I'm having the same issue on both my late 2006 Intel Xserves (firewire port on the front). The 2007 Intel XServe (USB port on the front) updated just fine with SU. So I tried copying the app over from the Utilities folder on the new one but wouldn't run on the older Xserves.
Maybe the older ones don't require the update?

(PS3) GT6 update 1.10 installation fails repeatedly

Hi, I have a serious problem with installing update 1.10. The system downloaded and installed the 2GB installation package but when the game started and the installation script wanted to apply the update the installation failed during the process. The only option was to press OK button but the update procedure started over and over again with the same result. I did a complete restore of my PS3 to its defaults and formatted the disk (full format). Even after that I couldn't update GT6. The game can run without any updates installed. Once I check for updates, the system downloads all 9 packages and installs them. Then I start the game and the update proceduce fails the same way like before the PS3 restoration. How could I solve it?

For those who are still struggling with updating problems...pls try to follow steps mentioned below...at least them worked for me !I found these instructions from elsewhere on this site...--------------------------------Hi mate, sorry to hear of your troubles. Settle in because I'm about to write a novel. Seems like you covered most of the big things to try.Unusual that a new formatted HDD is still giving you trouble.Sounds like the issue is probably related to the downloads then, possible packet loss, causing issues with the install. Are you using a wired or wireless connection?Obviously wired is better and you should always use that if possible.Wireless is more susceptible to packet loss during downloads than a wired connection. Do you have a copy of your save file?Are you installing copy that before you try the updates?In other words, any chance the save file is corrupted and causing you issues? Digital download or disc copy?Obviously, also make sure the disc is clean and not scratched, and the laser lens is clean. Only a few things come to mind that you may not have tried.One is downloading the patches in stages.Another is downloading via the new v4.60 XMB option.(Never done it, not sure how it works, but doubtful it will make much difference)The last is an in-game function ... switching off the 'Install Game Data' option.(I'm unsure exactly how this function works) At this stage, considering the game isn't functioning at all, you may as well delete all traces from the HDD.New HDD ... so refomat?Option available from the XMB.XMB ... Settings > System Settings > Restore PS3 System.I believe you will need to update PS3 to v4.60 again.Check HDD looks okay regarding System Software Version and Free Space.XMB ... Settings > System Settings > System Information. Otherwise remove all GT6 files from the console manually.For disc copy XMB ... Game > Game Data Utility > delete GT6 file. XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)If digital copy XMB ... Game > Game Data Utility > delete GT6 file. XMB ... Game > delete GT6 icon. XMB ... Game > Save Data Utility > delete both save file (GT6 and GT6 Backup)Again, just check HDD looks okay regarding System Software Version and Free Space. So .... once happy everything is removed, load GT6 onto console.If disc version start the game offline.If digital version download the game only.Start the game offline (or cancel option to Update Software) and confirm it's playing correctly.Play far enough to establish a save file.Quit game, and still 'offline' restart the game and again confirm all is good, and at this point you could consider swithing off the 'Install Game Data' option.Start button > Options > Game Data > Install Game Data.Check link for details.http://www.gran-turismo.com/us/gt6/manual/#!/save_load/autosaveYou may need to manually save to hold this setting change.So you now have a functioning game with a valid save file and the 'Install Game Data' function switched off. Okay, time to try updates.You could consider doing it in stages.Each patch will download and then install.Once installed, the next patch will begin downloading etc etc.It is possible to cancel out of the download once a file has installed. (circle button) So if it says 'Downloading File 1 of 9' allow for the download and install to finish.When it changes and says 'Downloading File 2 of 9' cancel the process.You should now have updated to the next version ... eg v1.01.You should now be able to play the game (by cancelling the option to Update Software) and check everything is okay. So try updating and installing the first patch file.Check the game is playing correctly.If you have the 15th Anniversary content, you could now consider introducing that the the game data.Access from XMB.XMB ... PSN > Account Management > Transaction Management > Download List.If you have a USB copy of your save file, you could also consider reintroducing that.If you do either of these things, check the game is still playing correctly before proceeding with the other updates. While testing game, you could also consider switching on the 'Install Game Data' option from the in-game menu.You may need to manually save, and then quit and restart game for the function to activate.It's unknown to me exactly how this function works.Whether anything will install immediately after you switch it on, whether it's not until you restart, or whether it will install anything at all, I'm not sure.After giving that a go, you could consider switching it back off again, and manually saving.(As I say, I'm unsure how this function works. Whether this is a worthwhile exercise is perhaps questionable, but apart from wasting a bit of time I see nothing wrong with trying it at each step.) Then try next patch.Download and install "File 2 of 9'.Cancel download once finished.Check game is playing correctly and manually save.Switch on 'Install Game Data'.Initiate data install, then switch off function and manually save. *Special note for v1.02*There is a known issue for updating forwards from v1.02.Check the link for details.http://www.gran-turismo.com/au/news/00_3266694.html Continue with 'File 3 of 9'.Repeat process as before. Next patch ... etc etc etc.Checking game and installing data (if available) after each patch. Going roughly from memory ...v1.01 and v1.02 were around 1GB and 1.2GB.v1.03 - 1.06 were all quite small.v1.07, v1.08, and v1.09 were again around 1GB or larger.So you might choose to skip through a few patches part way through if you wish. As I mentioned earlier, v4.60 introduced a new Game Update function to the XMB.By pressing 'Triangle' while on the GT6 (or any) game icon brings up a menu.On this menu is a new 'Check for Update' option.This allows you to check for updates without launching the game.How it works if it finds an available update I'm not sure. (haven't had a chance to test)So I don't know whether there's any advantage trying to patch GT6 via this option.But it's there if you want to try it out as another alternative. Obviously, with all that said, there is no guarantee it will work.With a new HDD, a regular full update in one go shouldn't be an issue, so there's a problem somewhere.Maybe the step by step approach will help.Again, and most importantly, wired connection if possible. If no luck it's just a case of try and try again.As you mentioned, using a friends internet, particularly with a different ISP and/or better connection, is a good option. Please let us know how you get on.Also, please let me know if there's a problem/error/mistake with how I've described any of the procedures.And if you could add anything to that step by step approach, or info. on the XMB 'Check for Updates' function it would be greatly appreciated. Best of luck with it.

Xperia Z2 Firmware Update via PC Companion = FAIL!

I appologize if this is a duplicate post. I searched the forum before posting but it seemed similar posts weren't exactly the same issue(s) I'm experiencing.
I'm getting the notification that there is a firmware update for my Xperia Z2 tablet but that I am required to use PC Companion to download/install it. However, for some reason PC Companion refuses to detect that my tablet is connected. I've tried multiple usb ports and two different computers. Under device manager it doesn't show any device driver issues and the usb drivers are installed and up-to-date. However I constantly run into error message after error message. The tablet is set to MTP mode and connected via the included Sony usb cable. I've followed every wizard, prompt, guide, etc. but in the end PC Companion still says there's no phone/tablet connected. Would be so much easier if it would just download the update to the tablet like EVERY other android device I own does.

Did you take a look at this?
http://talk.sonymobile.com/t5/FAQ/USB-connection-problems/m-p/348074#U348074
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien

Update on CC installer , failed

Wanted to apply updates to CC
Had to uninstall Photoshop
When I started to re install, was asked if I wanted to update installer, which I did.
Now installer does not work, all I get is this,
Have uninstalled and re booted several times.
Running windows seven with all updates
Help, very disappointed
Tim Williams

http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html
Try Solution 2

Camera Raw 6.7 Update for Mac OS 10.10: Installation Failed error message.

Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?

thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again.

Attempted Iphone 4 update to latest firmware update "failed"

Ive attempted to update the Iphone to the latest firmware update and it has failed 3 times, the final time it looked as though
it worked but stopped and went into new mode to go-back to Restore to old setting. Now it is locked up and asking me for the admin backup password
and everything I've tried is not working.. Not sure what to do at this point.
The laptop I'm using is a Panasonic CF29 and running Windows XP with SP3 installed.
I'm open to any ideas at this point.
Thanks Artman

Then it's pretty hopeless. Normally the error message remains displayed until you click "OK", so it's surprising that you didn't see it. You can try the shotgun approach; just try a bunch of stuff in the hopes that it will work. But first I suggest trying to update it again, and this time watch it. The following list covers the most common causes of update failures:
Open a Command window and type the command "netsh winsock reset"
Reboot your computer
Disable your antivirus and firewall
Launch iTunes
Connect the phone using a USB port directly on the computer, not a hub
When the phone is recognized in iTunes click on it, then click Restore
If the phone is NOT recognized in iTunes, disconnect it, the hold the HOME and SLEEP buttons for exactly 10 seconds until the screen goes black, then release SLEEP but continue holding HOME while you connect the cable and continue holding HOME until iTunes recognizes a phone in recovery mode
If the update completes you are in business
You mentioned being prompted for a backup password. If your backup is encrypted you will need to know the password to complete the restore; if you don't know it you will have to restore as New and manually add your content back. If it is encrypted you really did enter a password for it once, whether you remember doing so or not.

X6 firmware update to V40 installation - fail loop...

Similar Messages

Maybe you are looking for