X6 Problem with Search ignoring Internet connectio...

When using the search facility, even if my priority internet connection is configured as WLAN,clicking on a link in the search engine result page instigates a packet based session instead of the default (WLAN) internet connection even though the WLAN was used to bring up the search engine results page!
Seems search is ignoring the internet connection priority and establishing a packet data link and refuses to use WLAN.
Anyone have this too or is it provider specific (orange uk)?
Nokia X6 (16gb) firmware is v20.0.005.

@rattyp:
Settings>connectivity>destinations>internet>Delete all access points.
And;
Settings>connectivity>destinations>wap>Delete all access points.
Previous Phones: 6600, 7610, 6230, 6230i, 1100, 1112, N70, N73, N95, N95 8GB, 5800XM, 5230, C5, iPhone 3GS, SE Xperia X10, N900, N8, SE Xperia Arc
Current Phones: Nokia N9, iPhone 4

Similar Messages

Problems with Search in Contacts (Public folder favourite)

Office Version:Office 2010Operating System:Windows 7
I am running Outlook 2010, connecting to an SBS2003 server by HTTP and running in Cached mode.
My business contacts are stored in a Public Folder, and my personal contacts in my local Contacts folder.
The Public Folder is in my Favourites, and is designated an 'Outlook Address Book'
'Download Public Folder Favourites' is enabled in the Exchange Mail Account settings
I am having problems with Search (which was never a problem in Outlook 2007).
If I select the Contacts shortcut, under 'My Contacts I have listed in order:
Suggested Contacts
Office Contacts (this is my public folder favourite)
Contacts
Search Results
If I select the Office Contacts link, and attempt to search for a contact whose contact card I can actually see on the screen, the search will fail. The scope is defaulting to 'All Contact Items' (which is fine), but if I change this to 'Current Folder'
then the contact is immediately found.
In OL2007 I could search for a contact, even when not in a contact folder, and it would find every instance of it immediately.
Any ideas here? I have been told to rebuild my index, which I will do over the weekend as it will take some time. But I have doubts it will make much difference. This is a new machine with a fresh installation of Win7 x64 and Office 2010.
thanks

Keith, I have this same issue here. I looked on the Small Business Server pages for an answer as suggested by Xiu but could not find any. I'm not sure why this would be a SBS issue as we are not running SBS and have this issue.
For some reason, "All Contact Items" doesn't include the current folder if it is a public folder.
Did you ever get an answer/solution?

I'm having problems with my mobile internet connection

I'm having problems with my mobile internet connection. Wifi works fine. It seems like my connection get lost every tuesday and friday between 11 and 12 am local time (guess it would be between 2 and 3 am Los angeles time for example). The connection won't comeback by itself. I have to turn the phone, iPhone 4s iOS 5.0.1, off and back on again. The connection immediatly works fine after the restart and stays fine for days. I really don't know what to do. My provider doesn't seem to know either. Tried a lot of things, new settings, resets, I even got a new iPhone. Still the same problem however. Richt now I changes the time setting to see it the problem occurs at another time. Btw: the phone doesn't say "no service" and I can send sms messages and make phonecalls. The 3G symbol or the circular symbol is shown next to the name of the provider.
Does somebody has an idea what this might be? Thanks a lot.

Update. My carrier says the antenna of my iPhone 4s is not so good as the one in the iPhone 3G. They can't solve the problem. Their signal is too weak for the 4s at places I spend most of my time. Not the answer I expected, but I'm free to choose an other carrier. Hope this will help.
This was not the correct answer, I accidentially clicked the button..
Message was edited by: vasch

Problem with search plug-in in ver 5.9

Hello
I have a problem with search plug-in when you type some key words and press search button it works fine, but if you press enter jou have following error:
Whoops. Something broke.
Version      5.9.6.43135
Message      Invalid postback or callback argument. Event validation is enabled using in configuration or <%@ Page EnableEventValidation="true" %> in a page. For security purposes, this feature verifies that arguments to postback or callback events originate from the server control that originally rendered them. If the data is valid and expected, use the ClientScriptManager.RegisterForEventValidation method in order to register the postback or callback data for validation.
Source      System.Web
Stack      at System.Web.UI.ClientScriptManager.ValidateEvent(String uniqueId, String argument)
at System.Web.UI.Control.ValidateEvent(String uniqueID, String eventArgument)
at System.Web.UI.WebControls.LinkButton.RaisePostBackEvent(String eventArgument)
at System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBefore
Our technical people have been notified.
We're sorry for the inconvenience.
Thanks
Greg.

Grzegorz, I'm going to guess this is a problem with the version you're using. We're using 2007.0.620 and whenever we hit enter on the field instead of the search button itself it returns no results. As far as I can tell, it's a bug in the system.
It looks like updating to the latest version (624) isn't helpful either, although both 620 and 624 remove that nasty explosion that you're getting and instead just return the same page with no search results.
There may be a way to edit some code-behind to detect when a postback is being made, although given the locked nature of Web Tools I doubt it. If you can find a way to have the button be recognized, let me know - otherwise, I'd say it's a bug that needs to be addressed in the next version.

I have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search google in English

i have a problem with searching page, whenever i try to open any page a blank paper cums appear only written custom search by google this one is not such as my google home page
== This happened ==
Not sure how often
== i use to search any page like movies or etc

Well, it seems waiting is not my strong suit..! I renamed a javascript file called recovery to sessionstore. This file was in the folder sessionstore-backups I had copied from mozilla 3 days ago, when my tabs were still in place. I replaced the sessionstore in mozilla's default folder with the renamed file and then started mozilla. And the tabs reappeared as they were 3 days ago!
So there goes the tab problem. But again when I started mozilla the window saying "a script has stopped responding" appeared, this time the script being: chrome//browser/contenttabbrowser.xml2542
If someone knows how to fix this and make firefox launch normally, please reply! Thank you

E-Recruiting: Problems with search profile and serach templates

Hi Recruiting-Experts,
I´m facing problems with "Search Profiles" and "Search Templates"
(Customizing SPRO --> SAP-E-Recruiting --> Recruitment --> Talent Warehouse --> Candidate --> Candidate Search )
Out customers wants me to add a new search criterion to the talent search. It's a customer-field (type 'd' --> Date) belonging to infotype 5106.
Unfortunately, it doesn't work. The hit list is always empty.
What I did:
Customizing (see above)
Updated search profile (report RCF_RECREATE_SEARCH_PROFILES)
The result:
I can see and choose the new search criterion on talent warehouse search site (recruiters startpage)
I can find the data (internal format yyyymmdd) via transaction SKPR07 (see XML below, ZZEARLIEST_ENTRY 20090901)
By the way, the hit list is also empty when adding and searching for birthdate.
Has it got to do with the date stored in internal format?
Thanks for any comments / help.
Regards
CHRIS
=========================================================================

Hi Sebastian,
thanks for your quick answer.
That's why I didn't get it done for hours yesterday.
Thanks again,
Regards
CHRIS

Problem with not getting Internet Connect on AirPort Express

Problem with not getting Internet Connect on AirPort Express (version7.6.4). Error says cannot get valid IP address. Have reset Siemens SpeedStream 4100 several time, even with tech support from the big "A" DSL provider. Plug MacBook Pro directly into modem and works fine. Unplugged AirPort, even reset it, still no luck. A bad Express?? or am not looking in the right place to make connection. Was working fine up until Sunday.

Connect the AirPort Express (AX) to the cable modem via Ethernet cable.
In configuring the AX using AirPort Utility:
Under Internet, set the connection to be Ethernet using DHCP.
Under Connection Sharing, set it to distribute a range of IP addresses.
Under AirPort>Wireless, set the Wireless Mode to Create a wireless network, and fill in the remaining settings in the same window. Until you get it working, you might want to set Wireless Security to None.

Problem with ACE and Internet Explorer 8

I have a problem with ACE (system A2(1.1)) and Internet Explorer 8.
exactly:
ACE is configured as end-to-end ssl with 2 rserver and with the sticky source address. When user is opening the virtual address from IEv7, the web portal (On Microsoft IIS) works fine.
If user opens the same web portal but using IEv8, the session is suspended after 60 seconds.
I think, that the reason is http keep-allive, which is sending every 60 seconds from the user's internet browser.
Here is some information about this. http://en.wikipedia.org/wiki/HTTP_persistent_connection
Do you have any idea how to resolve this problem: upgrade ACE, change the configuration on IIS or ACE ??
Please help.

Hi Kazik,
Using a persistent connection or HTTP keepalives should not have any negative effect on the ACE, so, giving you a straight-forward answer to fix it is not going to be easy.
I would recommend you to open a TAC case to have this investigated further. When you do, please, provide the following data:
A showtech from the Admin context of the ACE
A traffic capture taken on the TenGig interface connecting the switch with the ACE backplane while doing a test connection (preferably one with IE7 and one with IE8 to compare)
If possible, a copy of the SSL private key. Being able to decrypt the traffic capture to look inside the HTTP flow would really make troubleshooting much easier.
Regards
Daniel

Having a problem with iTunes and internet radio. The programme keeps changing stations

I'm abroad at present and using a wireless connection at the lab. Itunes keeps changing internet radio stations as a function of time,
Any suggestions or os it a known problem with the current version?
Don

Try the following user tip:
"Invalid drive X:\" install errors

Problem with searching for 'empty' emails with BAPI_BUPA_SEARCH

Dear ABAP'ers.
I have got a small problem with BAPI_BUPA_SEARCH.
I Use this BAPI to search for Business Partners with the Email condition.
I put rhe Email to lv_email variable, it works ok.
    lv_email = ' '
    CALL FUNCTION 'BAPI_BUPA_SEARCH'
      EXPORTING
        email = lv_email
      TABLES
        searchresult = lt_searchresult   <= returns no BuPas
        return       = ls_bapiret2 .
But I need to have a possibility to search for such Business Partners who have got no email address. Unfortunatellu when I pass an empty lv_email to BAPI, it returns no Business Partners whilst such BuPas exist in database.
Is there some possibility to search for those BuPas who have got no email address assigned?
I will be thankful for help.
Regards,
P.

Can you query ADR6 table where SMTP_ADDR = space.
and pick the PERSNUMBER or ADDRNUMBER and pick the Patners related to that ..

Problem with search forms in master-detail structure

According to JHeadstart error message i cant generate 2 search forms in one page, BUT i generated master table in one page and master form + detail table in another so WHY i cant put search forms for both tables?? They are on the different pages!
How can i solve this problem?

Sasha,
The reason this is not allowed, is because when you use Layout Style table-form, the same UImodel is used for both the table and the form page, and each UImodel can have only one advancedSearch binding (which is also used for quick search). Each advancedSearch binding can be linked to only one iterator, and that is either the iterator of the master table or the iterator of the detail table.
An enhancement request to remove this limitation is high on our wish-list, but didn't make it in the 10.1.2.1 release.
You could try to make post-gen modifications to add an extra search. I have not tried it, but here is what I would do:
- generate with search for master, and backup the generated pages and ui model
- generate with search for detail, and backup the generated pages and ui model
- merge the pages and ui models, renaming one of the advancedSearch bindings
- for the page where the renamed binding should be use, make a subclass of JhsDataAction and override onQuickSearch and/or onAdvancedSearch, to use the other binding name
Hope this helps,
Sandra Muller
JHeadstart Team
Oracle Consulting

Problems with PDF on Internet site for Indian visitors

Hello,
I'm administrator of a website with German und English contens (made with typo3). When I check my English sites online, everything is okay.
But a visitor from India told me, he is not able to open the linked PDF-files.
I checked the links and the PDF-files, but they are okay. It seems to be an "Indian problem".
The visitor get's the message "Internet Explorer can not display the webpage". May be a problem with the integrated Reader in the IE?
With best regards,
Lille.

What Reader version is that Indian visitor using?
Also, can you post a link so that someone can test it?

Nokia 6210 Problems with using Edge (Internet Conn...

I have a Nokia 6210 phone bought from an authorized Nokia Care Center in Delhi, India two weeks ago. The software version on the phone is 3.08 dated 11-June 2008. It also mentions custom version as 03.08.c00.01
I am an Airtel Prepaid customer in New Delhi, India and had been using Mobile Office service on my prepaid number for some time. It worked perfectly fine for my Nokia 6233. On my current Nokia 6210 the Internet connection works fine for the first time through the built in browser or though any other application (like Google Maps, Gmail etc) which required internet and displays the sign signifying that the edge connection is active.
The problem is that once I close the application the standby sign for Edge network is displayed as follows and no matter what I am unable to use the internet connection on the phone again until I do the following
Restart the phone (which definitely isn’t a good option)
Wait for around 8-10 minutes after which the Edge on hold sign disappears and is replaced by which means that the edge is available
I found this out accidentally, but if I press the keys *123# which I typically use for enquiring balance, the on hold sign goes away and is replaced by the Edge available sign. after which things work fine.
Not sure where the problem is. I really doubt it’s got to do something with Airtel as the same number worked perfectly fine with my previous Nokia phone in the same area. In addition my wife’s phone (again an Airtel prepaid number) is working great in the same area. So either this has got to do something with the handset or the compatibility of the handset with the Airtel, New Delhi.
I have tried various sets of setting from the following sources
The wizard in built in the handset
Getting the settings from the Nokia site
Getttng the settings from Airtel Customer Care
But with all of them I am facing the same set of problems.
Wanted to check if anybody out you have ever faced a similar problem with this phone or one in a simlar series?

I suggest that you don't make permanent coupling between devices. Looks like Nokia modem is more responsive when you need to manually accept every connection at the phone's end.

Problem with search method in AM called from JSP

Hi, im trying to get the real value from an foreign key of a view, and i have been created a custom search method in the AM, but i got a problem, the search only get results the first time that is called, the next times gets null result :
public String getValorReal(Long identificador, String vista,
String campoFiltro, String campoValor)
where identificador is the foreign key, vista is the name of the view that contains the real value of the foreign key, campoFiltro is the field name of the view that will match the foreign key, and campoValor is the field name of the view that the search method will return as the real value.
I created this class that call the search method :
public class CuentasContablesOrgLOV {
private BindingContainer bindings;
public Map CuentaContable= new HashMap(){
public Object get(Object key){
Map parametros;
BindingContainer bindings = getBindings();
String result = null;
OperationBinding operationBinding = bindings.
getOperationBinding("getValorReal");
if (operationBinding != null){
parametros = operationBinding.getParamsMap();
parametros.put("identificador",new Long(key.toString()));
parametros.put("vista","CcCuentasContablesView4");
parametros.put("campoFiltro","identificador");
parametros.put("campoValor","CuentaContable");
result = (String)operationBinding.execute();
return result;
public Map getCuentaContable() {
return CuentaContable;
I invoke this class from the JSP with EL:
<af:outputText value='#{CuentasContablesOrgLOV.cuentaContable[row.CcCucoIdentificador]}'/>
In the AM method obtains all the parameters correct, but the search only works the first time!
Do you have an idea whats been happened?
thanks a lot for your help

There is no <%@ method %> tag for a JSP.
http://java.sun.com/products/jsp/syntax/1.2/syntaxref12.html
It looks like you are trying to write a JSP that only accepts post requests - not get?
I'm not sure if you can accomplish that in a JSP directly.
You can with an HttpServlet (which is where the doGet/doPost methods are defined) but HttpJspPage doesn't extend that class necessarily.
Best you could probably do is put in a test of request.getMethod() to see if it is get/post.

Problems with connecting to internet after power loss w WRT54G v3

I'm having problems connecting to the internet after a power loss with my WRT54G v3 wireless router. I'm at the latest firmware version (4.21.1).
I found similar problems with the V2 version of this router.
After a power failure, I can access the http interface to the router,all of my settings are there (not set to factory settings),the unit is connected to my ISP provider,I can ping from the router, but none of my wired or wireless PCs can ping.
To "fix" this condition, I have to reset to factory settings, then re-load my saved configuration.This usually works, but sometimes I have to hard reset the unit.
Anyone having this problem? Anyone have a fix?

Sudden loss of power for extended periods of time will 9x out of 10 will corrupt the saved configurations and can only be fixed in the way you already described.
A solution for this is getting an UPS incase of a power failure your equipment will be on battery back up until either the battery runs out or power is restored (depending on the model changed the battery time)
With Knowledge… Impossible means nothing.
Credentials
Computer experience: 11 years
Cisco networks experience: 8 years
Network administrator: 6 years
N.E.T. networks experience: 6 years
Linksys networks experience: 6 years
Recent additions: A+ | Networks+ | Linux+ | Security+

X6 Problem with Search ignoring Internet connectio...

Similar Messages

Maybe you are looking for