X6 - Random WLAN connection

Ive just updated my Nokia X6 to the latest I can (v 21.0.004) as I am t-mobile uk,
every now and then I get WLAN connection selection screen.
I select cancel for a further 5 times that it askes.
Why is this ?
The thing is, Im not touching the phone when it pops up, no applications are running, I can turn my phone on from being off for ages and just leave it and it will ask..
Thanks.

My X6 has exactly this problem. It brings up routers available locally, one minute, the next it finds different ones, or none at all. It only finds my own router rarely, and - when it does - it allows me to connect, and often disconnects within seconds. It isn't a router problem, as I can access the router with a Nintendo Wii and with the laptop (I'm typing this via the laptop/router connection). It isn't a problem with the network key, because (rarely) I can access websites and even send emails via the router connection, but this ALWAYS disconnects. It is a recent development too, in that for about 6 months, the connection worked fine. Now it doesn't...

Similar Messages

Losing internet connection randomly (wlan stays connected) - wicd

Since about a week now I'm running into endless problems with my wlan connection - before that, all worked well (I didn't changed any hardware)
I'm losing my internet connection in random intervals and I can't track down the reason for this problem. I've a dual-boot setup with win7 on it and there I have constant connection so this can't be any hardware problem.
I am using wicd to manage my wlan (wicd-kde, wicd-curses).
always used dhcp and never made any problems -even tried with static IP now which unfortunately didn't help.
One thing to mention - even if I'm connected, the connection seems very slow, compared to the laptop I'm on (in the same network).
now some console output:
lspci | grep -i net
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8056 PCI-E Gigabit Ethernet Controller (rev 12)
05:02.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
(both on-board - lan is not used - just wlan)
sudo tail -1 /etc/rc.conf
DAEMONS=(!hwclock dbus syslog-ng !network !netfs crond wicd postfix sshd)
iwconfig wlan0
wlan0 IEEE 802.11bg ESSID:"Schnulli"
Mode:Managed Frequency:2.437 GHz Access Point: 00:1E:69:9F:22:3F
Bit Rate=18 Mb/s Tx-Power=20 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Power Management:off
Link Quality=44/70 Signal level=-66 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:4238 Invalid misc:6580 Missed beacon:0
ifconfig wlan0
wlan0 Link encap:Ethernet HWaddr 00:15:AF:0F:C8:48
inet addr:192.168.0.12 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::215:afff:fe0f:c848/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:20308 errors:0 dropped:0 overruns:0 frame:0
TX packets:16695 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:24970986 (23.8 Mb) TX bytes:2037458 (1.9 Mb)
/var/log/wicd/wicd.log:
2011/07/18 15:53:39 :: ---------------------------
2011/07/18 15:53:39 :: wicd initializing...
2011/07/18 15:53:39 :: ---------------------------
2011/07/18 15:53:39 :: wicd is version 1.7.0 552
2011/07/18 15:53:40 :: setting backend to external
2011/07/18 15:53:40 :: trying to load backend external
2011/07/18 15:53:40 :: successfully loaded backend external
2011/07/18 15:53:40 :: trying to load backend external
2011/07/18 15:53:40 :: successfully loaded backend external
2011/07/18 15:53:40 :: Automatically detected wireless interface wlan0
2011/07/18 15:53:40 :: setting wireless interface wlan0
2011/07/18 15:53:40 :: automatically detected wired interface eth0
2011/07/18 15:53:40 :: setting wired interface eth0
2011/07/18 15:53:40 :: setting wpa driver wext
2011/07/18 15:53:40 :: setting use global dns to False
2011/07/18 15:53:40 :: setting global dns
2011/07/18 15:53:40 :: global dns servers are None None None
2011/07/18 15:53:40 :: domain is None
2011/07/18 15:53:40 :: search domain is None
2011/07/18 15:53:40 :: setting automatically reconnect when connection drops True
2011/07/18 15:53:40 :: Setting dhcp client to 0
2011/07/18 15:53:40 :: Wireless configuration file found...
2011/07/18 15:53:40 :: Wired configuration file found...
2011/07/18 15:53:40 :: chmoding configuration files 0600...
2011/07/18 15:53:40 :: chowning configuration files root:root...
2011/07/18 15:53:40 :: Using wireless interface...wlan0
2011/07/18 15:53:40 :: Using wired interface...eth0
2011/07/18 15:53:44 :: hidden
2011/07/18 15:53:45 :: Autoconnecting...
2011/07/18 15:53:47 :: No wired connection present, attempting to autoconnect to wireless network
2011/07/18 15:53:49 :: hidden
2011/07/18 15:53:49 :: trying to automatically connect to...Schnulli
2011/07/18 15:53:49 :: Connecting to wireless network Schnulli
2011/07/18 15:53:51 :: Putting interface down
2011/07/18 15:53:51 :: Releasing DHCP leases...
2011/07/18 15:53:51 :: Setting false IP...
2011/07/18 15:53:53 :: Stopping wpa_supplicant
2011/07/18 15:53:53 :: Flushing the routing table...
2011/07/18 15:53:53 :: Putting interface up...
2011/07/18 15:53:55 :: Generating psk...
2011/07/18 15:53:55 :: Attempting to authenticate...
2011/07/18 15:53:58 :: Running DHCP with hostname blub
2011/07/18 15:53:58 :: dhcpcd[1333]: version 5.2.12 starting
2011/07/18 15:53:58 ::
2011/07/18 15:53:59 :: dhcpcd[1333]: wlan0: rebinding lease of 192.168.0.12
2011/07/18 15:53:59 ::
2011/07/18 15:54:00 :: dhcpcd[1333]: wlan0: acknowledged 192.168.0.12 from 192.168.0.1
2011/07/18 15:54:00 ::
2011/07/18 15:54:00 :: dhcpcd[1333]: wlan0: checking for 192.168.0.12
2011/07/18 15:54:00 ::
2011/07/18 15:54:05 :: dhcpcd[1333]: wlan0: leased 192.168.0.12 for 604800000 seconds
2011/07/18 15:54:05 ::
2011/07/18 15:54:06 :: dhcpcd[1333]: forked to background, child pid 1388
2011/07/18 15:54:06 ::
2011/07/18 15:54:06 ::
2011/07/18 15:54:06 :: DHCP connection successful
2011/07/18 15:54:06 :: not verifying
2011/07/18 15:54:06 :: Connecting thread exiting.
2011/07/18 15:54:09 :: Sending connection attempt result Success
really don't know what to do now - help is very much appreciated!
thanks in advance

Thanks for you answer!
Actually, I tried it with dhclient too and it didn't helped at all.
I switched to netcfg(2) now and it seems working - wicd is completely removed from my system - hopefully it will stay like this now.
the only problem for now is that my connection seems quite slow - any ideas where/how I can track down possible issues?
still I've no idea what was/is causing those problems since in win7 all works well..

Qosmio G30-182: Drops Wlan connection & then cannot find any Wlans

I currently use driver v.11.1.0.100 for Intel(R) Pro/Wireless 3945ABG, which is the latest driver I found here at Toshiba.
My problem is that I randomly lose my wifi connection, both at my home wlan (using WEP protection) and at my university (WPA-Enterprise). After the connection drops, it is impossible to find any wlan nodes unless I reboot.
Anyone have any suggestions on how to fix this issue? It is kind of frustrating having to reboot randomly because I need my network connection!

There could be different reasons why the WLan connection is not stable;
- There could be an compatibility issue between the router and WLna card.
- The WLan driver is not up to date -> in such case update the WLan driver!
- If you use Vista OS -> install al Vista OS updates and fixes
- The weak WLan signal could has a bad influence and the Wlan card would disconnect
- Check the ALL the settings in the WLan card Advanced options like mentioned [here |http://209.167.114.38/support/techsupport/tsbs/all/-TSB001435.htm]
- Check if the same issue would appears using other WLan cards (USB WLan stick)
bye

N8 3G and WLAN connections

Is it possible to turn off the 3G and WLAN connections so that the they are active ONLY when I need them?
Currently I have 3G connection active all the time even I do not do anything with the Internet or applications which are using 3G (main display is showing the "connected" character below the 3G letters).
Also I would like to turn off the "search WLAN" feature until I am going to use that connction. I do not want to turn it OFF completely just want to put it away until I really need WLAN. I do not want it to search the WLAN networks until I need the WLAN.
I would like to turn these connection off to save the battery.

As it was stated in several review articles, the connectivity concept on the N8 (formerly Symbian ^3) is still somewhat in an experimental state.
The introduced "Destinations" yet most of the programs are not aware of this functionality. My tipical scenario would be that I have:
- destination with all my WLANs and 3G for fallback
- destination with WLANs only
- destination with 3G only
this would allow me to direct my data flow exactly where I want it.
Instead what I get:
- AGPS goes out on a random (!) data connection
- S60v5 apps try to go the old way of "Define access point", being unaware of "Destinations"
- Gravity is even more confusing as it has its own WLAN option and absolutely disregards the phone options. It goes out on 3G even if there's WLAN available .
So the basic answer to your question:
at his moment can only check under connectivity what app is using your 3G data and check the setting within this app. You cannot generally disable 3G connection as far as I know
trying to get along with an N8

Thinkpad X220: bad wlan connection when docked and lid closed

Dear forum
I use a Lenovo ThinkPad X220. I have no trouble with the wlan connection when i use the notebook alone. The wlan connection is also stable when i use the notebook plugged in the dockingstation with the lid open. But when I use the notebook plugged in the dockingstation with the lid closed my wlan connection drops regularely to about 2 Mbps and gets very unstable.
The ThinkPad uses the Intel Centrino Advanced-N 6205 wlan network controller:
$ lspci | grep 6205
03:00.0 Network controller: Intel Corporation Centrino Advanced-N 6205 [Taylor Peak] (rev 34)
The network controller uses the iwlwifi driver, that comes with the current linux-firmware package:
$ pacman -Ss linux-firmware
core/linux-firmware 20150206.17657c3-1 [Installiert]
Firmware files for Linux
I didn't change any options of the kernel module, everything runs in default mode:
$ modinfo -p iwlwifi
swcrypto:using crypto in software (default 0 [hardware]) (int)
11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
amsdu_size_8K:enable 8K amsdu size (default 0) (int)
fw_restart:restart firmware in case of error (default true) (bool)
antenna_coupling:specify antenna coupling in dB (default: 0 dB) (int)
wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
nvm_file:NVM file name (charp)
uapsd_disable:disable U-APSD functionality (default: Y) (bool)
bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
power_save:enable WiFi power management (default: disable) (bool)
power_level:default power save level (range from 1 - 5, default: 1) (int)
fw_monitor:firmware monitor - to debug FW (default: false - needs lots of memory) (bool)
At first I thought, the problem could be caused by the KDE power saving settings. I changed the settings, so nothing happens when I close the lid (no hibbernation or screen lock or something like that), but without success (the wlan connection is still unstable under the described circumstances).
Also dmesg shows nothing that points out a problem (as far as I can see):
$ dmesg | grep iwlwifi
[ 19.688522] iwlwifi 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 19.688679] iwlwifi 0000:03:00.0: irq 31 for MSI/MSI-X
[ 19.696095] iwlwifi 0000:03:00.0: loaded firmware version 18.168.6.1 op_mode iwldvm
[ 19.718023] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG disabled
[ 19.718027] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[ 19.718028] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING enabled
[ 19.718029] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
[ 19.718145] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 19.753757] iwlwifi 0000:03:00.0 wlp3s0: renamed from wlan0
[ 20.128443] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.128652] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 20.403905] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 20.404212] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
[ 68.922975] iwlwifi 0000:03:00.0: L1 Enabled - LTR Disabled
[ 68.923192] iwlwifi 0000:03:00.0: Radio type=0x1-0x2-0x0
So I have no idea where this strange behaviour comes from (only wild guesses: buildfactor, antenna orientation,...).
Any help would be really appreciated.

hmmm...
how about checking both your wired and wireless nic drivers in device manager to make sure that the "allow computer to turn off this device to save power" checkbox on the power management tab is deselected.
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

What is WLAN connectivity, how to use it for inter...

hi all
i have nokia n79, i have know about WLAN connectivity, i mean how to use it. i just check it in my office it shows WLAN network found, i opend it and select start web browsing, then it asked select WLAN network there it already shows hidden WLAN, then i connected it through hidden WLAN then it asked WLAN network name, what is WLAN network name and how to use WLAN network for internet browsing. pls suggest me
thanks/regards
Chandrakant Rajolkar

This will get you started.
http://en.wikipedia.org/wiki/Wireless_LAN
Check your user manual.
http://europe.nokia.com/get-support-and-software/product-support/nokia-n79/guides
‡Thank you for hitting the Blue/Green Star button‡
N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

Firefox 3.5 and up randomly drop connections

Greetings! The problem I'm having is: Every time I've tried to install and use Firefox 3.5 and up, as I'm browsing the web and I go to, say, click on a link, Firefox will randomly "drop" the connection. It'll pause for 10-15 seconds, then pop up a generic "cannot find server" message. I then go to reload the page, and for another 10-15 seconds it won't even attempt a connection -- it'll just instant-reload with the same generic "cannot find server" message. After that, it will mysteriously be able to connect just fine... for about 2-5 minutes. The problem repeats... over and over...
I should mention that I constantly have a "ping www.rr.com" window open in the background, and even when Firefox is "unable to connect", the ping window shows my connection is just fine. All of my other programs are able to connect just fine as well -- only Firefox 3.5+ or programs based off of Firefox 3.5+ (SeaMonkey 2.x) have this problem.
Thinking it might be an addon problem, I've completely uninstalled (even using Revo Uninstaller) and reinstalled Firefox 3.5+, and even with absolutely no extensions installed, it still randomly drops connections.
This problem also happens on my netbook PC, again with a fresh Firefox install (even on a fresh Windows format + install) and a solid ISP connection.
I can confirm encountering this problem with Firefox 3.5.4, 3.5.5, 3.6.6, and even with SeaMonkey 2.0.3 and 2.0.5. On the other hand, Firefox versions 2.0.0.20 and SeaMonkey 1.1.18 are NOT affected by this problem.
I hope this problem can be resolved soon, since sites like Youtube are starting to really dislike Firefox 2.0, and I'd like to use up-to-date browser extensions. :(
== This happened ==
Every time Firefox opened
== Every time I've tried to use Firefox 3.5 and above

Using
*Comcast Broadband*textMotorola SB5101*textWindows 7 Home Premium*textCisco Linksys *textFireFox 3.6.7*textNorton Security Suite
and it happens to this home too.

N95 WLAN Connection problems - Orange Livebox (UK)

I am trying to get the N95 to connect to the internet wirelessly through Orange Livebox (UK). I have run the WLAN wizard and the phone has identified it. I have input the WEP key and thats worked fine.......except everytime I try to connect to the net via this method I get a connection error. Has anybody else had WLAN connection problems? Can anybody help?

hi,
did you press "1" button at the back of the Livebox before pairing ?
what kind of error message do you get on the N95 ?
does it fail the same way when you go through the homescreen "WiFi scanning / Start Web Browsing" or through Tools / WLAN Wizard ?
Cheers,

Firefox with wlan connect on laptop gives no connect what I need to maake wlan connect, network is ok

have a bought a hp pavilion g series. had trouble with installation and updates. now problem that firefox with wlan has no connection. suse linux 12.1, wireless lan 802.11, FRITZ!Box Fon WLAN 7270, find no setup for wlaan in firefox that over the laptop wlan connection will work

In Firefox 3.6.4 and later the default connection settings have been changed to "Use the system proxy settings".
See "Firefox connection settings" in [[Server not found]]
You can find the connection setting here: Tools > Options > Advanced : Network : Connection
If you do not need to use a proxy to connect to internet then select ''No Proxy''

WRT54GL loses Wlan connection

Hi
I have a problem with an WRT54GL Router. It keeps losing the Wlan connection. Then I have to reboot the router to get it working again.
On some days everything works fine, and the other day I have to reboot every 5 minutes.
I don´t use P2P. So there are not many simultaneous connections. Mostly there are only one or two Wlan Clients active.
Between the Router and the Client is only one Wall. Signal Strenght is at all times above 85%.
Does anyone have an idea what might cause this?

Try upgrading your router's firmware and reconfigure it from the scratch.
Click on this link for the instruction.

Help!!!!!!!! WLAN connection E71

I have a problem with WLAN connection (E71), when I access my wlan, i receive a message saying " WLAN is already active, close it and try again".

Please, have someone any solution?

How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Dear all:
I have a wifi roruter with SSID test "3"
But when I execute following command netsh wlan connect "test \"3\""
the netsh reply: 未將設定檔 "test " 指派給指定的介面。
Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
test, not test "3".
Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
Regards,
Joseph

Hi Joseph,
Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
Therefore, I would like to suggest you run command as this syntax:
netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
To do this, please refer to the section “connect” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Karen Hu
TechNet Community Support

5800,Wlan connection appears as 'unknown', however...

Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.

angel_apm wrote:
Hi to everybody!.
I have an issue with wlan connections. I defined a new access point in wireless connections, and I put it into the 'internet' destination. The access point is saved as WLAN_XX, and works perfectly.
As soon as I disconnect it, and click to find wireless connections, something rare happens. When there is high signal, the connection appears as 'known'. However if there is low signal, appears as 'unknown'. Therefore I have to configure it again as a new connection (retyping the wep password),which as a consecuence, is saved as 'WLAN_X01)'.
I updated the firmware from 31.0.101 to 40.0.005. A saved connection always showed as 'known' (even when i had not enough signal to connect) when i used the old firmware (31.0.101). I don´t know if it´s a new feature or a bug or how it´s solved, someone knows? Thanks.
This is normal. You can delete this access point from the settings and re-save it.
If you want to thank someone, just click on the blue star at the bottom of their post

Satellite M70: WLAN connection lost

Hello!
I have Satellite M70 and I use integrated Intel WLAN card 2200bg. I have the latest drivers downloaded from Toshiba web site and Asus WLAN router w520g with latest firmware. Connection signal is excellent but sometimes actually very often connection is lost for 5-10 seconds.... I am downloading files all the time so there is no idle time in network traffic.
How can I inspect what is reason for losting connection?
Could authentication method or channel mode be a reason for problems?

Hi!
I updated my driver(latest one from intel website) and problem still exists. But now with Intel Wireless utility I can see error messages when connection goes down. I also opened support case to Intel about this problem. Let's see what they suggest.
I have also tested different kind of variations of configurations (power settings etc.) but no helps!
Now I am testing WLAN connection without authentication and it seems to work ok without connection lost. I will test different kind of authentication methods because i really want to see what authentication causes problems.
One thing I can say more. If I want to see connection break as soon as possible, I have to generete traffic with different kind of p2p programs and I also ping my router (default gateway) with command ping -t -l 1500 same time.

Wlan connection slow

Hi,
since a few days I have big problems with the WLAN-connection of my late 2011 13" Macbook Pro that leads to very slow Intenet Connections and Slow SMB-Server access.
In Detail: If I will open a Webpage it will take 50 times longer then from my iPad or Windows PC; and I run an Windows 2012 Server as an Data Pool, if I will access to any Remote Hard disk the Mac will need 5-10 sec. to load a Folder (the Windows PC loads it directly after the "klick").
Intristingly, If I am connected via LAN (T-based 1000 Mbit Gigabit Ethernet) everything works extremly fast.
Does anybody have a Idea to Solve this Problem? I run Mountain Lion in the latest Version, nothing has changed the System since or before the Error occured.
Thanks....

Yeah there is....
CCX - AironetIe Support.......................... Enabled <-- disable this
DTIM period for 802.11a radio.................... 1<--change to 2
DTIM period for 802.11b radio.................... 1<--change to 2
   Wi-Fi Protected Access (WPA/WPA2)............. Enabled
      WPA (SSN IE)............................... Enabled <-- disable this
         TKIP Cipher............................. Enabled <-- disable this
         AES Cipher.............................. Enabled <-- disable this
      WPA2 (RSN IE).............................. Enabled
         TKIP Cipher............................. Enabled <-- disable this
         AES Cipher.............................. Enabled
      Auth Key Management
         802.1x.................................. Disabled
         PSK..................................... Enabled
         CCKM.................................... Disabled
Swotch configuration should look like this:
description connection to wlc port 1
switchport trunk encapsulation dot1q
switchport trunk native vlan 9
switchport trunk native allowed vlan 9
switchport mode trunk
description connection to wlc port 2
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 99
switchport mode trunk
description connection to wlc port 3
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 103
switchport mode trunk
description connection to wlc port 4
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 102
switchport mode trunk
description connection to wlc port 5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 100
switchport mode trunk
description connection to wlc port 6
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 101
switchport mode trunk
Thanks,
Scott
Help out other by using the rating system and marking answered questions as "Answered"

X6 - Random WLAN connection

Similar Messages

Maybe you are looking for