X6 v20.0.005 update--post bugs/problems here

So far I've noticed:
1-Can't create new profiles anymore-try it in "Settings-Personal-Profles-Options-Create new"
2-After disconnecting from Ovi Store have to manually disconnect from Internet connection
3-Not much (any?) difference between 3 degrees of strength of vibration in "Touch screen vibration" in Profiles
4-Can't backup to Mass Memory

sorted. Well, sorted my issue out.
Ive done a hard reset on the X6. So..
Turn the phone off, then....
HOLD GREEN, RED, PHOTO and whilst keeping these buttons held, press and hold power.
Keep all 4 buttons held until you get the choose country screen.
Thats it, reset.
Its kept all my music and apps although some havent installed as they are assigned to the memory card and need installing manually.

Similar Messages

Xorg & Catalyst updates cause major problems here

I went through the other similar threads and tried just about everything without luck... The latest Xorg & Catalist updates cause lots of problems on my desktop.
The video card is an ATI X300.
Without a xorg.conf, X server starts and things work, more or less - but much slower than they used to. It's pretty clear fglrx is not actually used, xv doesn't work, fglrxinfo gives:
Error: unable to open display (null)
With the previous xorg.conf (the one wich worked fine before the updates), X doesn't start (even after commenting out the "RgbPath" line and adding Option "AutoAddDevices" "false") and the log shows many fglrx errors such as:
(EE) fglrx(0): Unknown EDID version 0
(EE) fglrx(0): ===[swlDalHelperAddCustomizeMode] === CWDDEDI_DisplayGetSetModeTimingOverride failed: 7
X -configure won't generate a xorg.conf
Fatal server error:
Caught signal 11. Server aborting
In conclusion:
- without a xorg.conf fglrx doesn't work although X server starts
- with an old xorg.conf fglrx will generate errors and X server will not start
Any ideas?
Last edited by zamolxis (2008-12-15 14:11:41)

De Mysteriis wrote:
# pacman -S xorg
# pacman -S catalyst
Add HAL daemon to your rc.conf
# cp /usr/share/hal/fdi/policy/10osvendor/10-keymap.fdi /etc/hal/fdi/policy/10-keymap.fdi
# vi /etc/hal/fdi/policy/10-keymap.fdi
(Add your keyboard layout)
# vi /etc/X11/xorg.conf
(Write something like # My xorg.conf and save)
# aticonfig --initial --input=/etc/X11/xorg.conf
# startx
This worked for me 100%.
I had alreday done all that. Still, X will crash every time after changing the resolution (for tv out) and back and won't restart unless I delete /etc/ati/amdpcsdb first. Rebooting won't help either (again, unless I delete /etc/ati/amdpcsdb first).
Last edited by zamolxis (2008-12-16 09:14:48)

Nokia 5230 - cant update to v20.0.005

Just bought a Nokia 5230 from Argos. It had v11.0.079 firmware installed. I've tried updating the firmware to v20.0.005. I used the *#0000# OTA method. However, the latest firmware that it found was v12.0.089 so I installed it. I've tried again to get v20.0.005 but it says I have the latest firmware.
I'm on a Vodafone contract that I've been on for the last 5-6 years. I have it at half price so never get a phone upgrade so I always just buy a new phone every couple of years or so. I'm on such a good tariff that I prefer to keep it that way.
Any ideas why I can't get the v20.0.005 firmware? I haven't tried it via the PC yet as I dont have the required cable (where can I get one of these?).
Thanks

Firmware is tied to product code not phone model .
In your case it will be Vodaphone at fault .
http://europe.nokia.com/support/download-software/device-software-update/can-i-update
jje

10.5.7 update - no problems here

I am not bragging, just want to impart what I did after reading all the posts about the problems.
Downloaded the combo update from the Apple support site. 792 megs.
http://support.apple.com/downloads/MacOS_X_10_5_7_ComboUpdate
Repaired permissions.
Restarted in safe mode.
Installed the combo update.
Restarted (restarted one time on it's own after that). From restart in safe mode to final restart took about 25 - 30 minutes.
Repaired permissions once more.
I don't that it would have gone any differently had I just did a software update from the apple menu, but I didn't.
Hopefully anyone who hasn't done it yet has no problems and those that have and do have problems get them resolved quickly.

10.5.7 gave me spontaneous system crashes when running on battery power, with plenty of battery life left. To clarify: what I mean by 'spontaneous system crash' is, the machine behaves exactly as if the battery had been pulled out. Years ago I experienced similar behavior with old batteries that needed replacing. Currently, though, I actually have two young batteries that I alternate between, and the problem occurs with both batteries. I no longer have a laptop. I have a desktop.
I am sure it is not the logic board-- everything was fine until immediately after 10.5.7 upgrade. I bet that this is related to older logic boards, though-- I have the first intel MBP that came out. I have seen two people posting on discussions here saying that logic board replacements fixed their apparently identical problems. Perhaps these posters' logic board fixes happened because the upgrade replaced the older board with a more modern board that is not susceptible to the bug.
I will be downgrading to 10.5.6 ASAP, and I am not happy about it. Time machine is no help, because you can't revert the OS only, you have to lose all new data created after the system update.
It appears from the various postings here that upgrading to 10.5.7 is a kind of russian roulette. Many people (perhaps even most) have no problems, but then there are others (like me) who experience catastrophic problems. I would say to those who are considering the upgrade: are you feeling lucky?

New number of posts bug(?) + question; no #100, and total # of posts vary

New number of posts bug(?) + question; no number 100, and total number of posts vary
Intrigued by Tuttle's new attempt to join Niel's old habit to keep his own total number of posts count, I went and start counting my posts since the New Discussions. Because I saved my latest Old Discussions Post-and-Points info, I can see what are the previously-still-online ones (the pre- 14-Nov-2005 01:31 GMT ones), and I know exactly what was my "real" total number of posts before 14-Nov-2005 (2446).
My New Discussions posts number however, is quite uncertain.
Firstly, when I use the "My Posts" link on the right, then clicking on and on on the "Next" link,
my "Viewing 91-100 of 586 -- Pages" shows 91-99 instead of 91-100
(= should show 10 posts, shows 9 posts)
then I go on clicking Next Next Next, and I see the same missing counts happen elsewhere:
my posts number 100, 259, 260, 370, 390, 520, 558, 559, 560, 578, 579, and 580 are missing too.
Note that I wouldn't bother doing all this, and I would have thought it's just very old posts that are automatically deleted like in the Old Discussions,
BUT,
the problem is that when I choose to see all my posts together on the same page
(by using the start=0&range=600 suffix in the URL)
I get a total number of posts that is different (570).
A third way to quickly see all posts without having to load too big page
(using the start=0&range=300 suffix in the URL then only one "Next" click)
shows yet another, different again, number of total posts (573).
And my "official" total number of posts is (586).
Dear HOSTS,
- If this can be used as a bug report to fix a counting problem, glad to help.
- If there is no bug, I have two(+) questions then:
1) Was my post number 100 deleted?
(should be around 27-Nov-2005 18:00 GMT)
Also:
I thought the Total Posts number that we see in "My Public Profile" or under the avatar in each post (586), was only the number of posts still online.
- if it is the case, then there are no automatically deleted old posts anymore?
- if old posts are automatically deleted like before, this number should vary?
- if it doesn't vary (it just grows by one per new post), AND at the same time old posts are actually automatically deleted,
it has to show the "real" total number of posts then,
(as it is now, a total starting from the Old-Discussions-still-online-posts, it makes no sense),
that is,
the total posts in the New Discussions PLUS the total posts since first registration in the Old Discussions.
So,
2) What does it show exactly?
Thanks again for all the great work!
Axl
220? 221?

Thank you Andreas,
Your confirmation about the "post #100 bug" does help.
"As for your other missing posts - I guess Tuttle's assessment that they might be deleted is probably right..."
Yes, that makes sense and that's what I'm trying to figure in my OP, but then,
after I posted my "#221/2667 post" (11-Dec-2005 21:51 GMT), my originally missing #
259, 260, 370, 390, 520, 558, 559, 560, 578, 579, and 580
should have become
260, 261, 371, 391, 521, 559, 560, 561, 579, 580, and 581
right? (forget the #100: this one we know for sure it's a bug)
Or if the software counts them from the first (now that would have been a good start) instead of starting from the most recent,
they should become
258, 259, 369, 389, 519, 557, 558, 559, 577, 578, and 579
Well, that's not what happened. Now the missing # are
259, 260, 370, 390, 400, 520, 559, 560, 570, 579, and 580
(in addition to the same #100) (#558 and 578 not missing anymore).
As you can see, there is no logic:
It doesn't work as a simple numerotation of StillOnlinePosts, no matter the order
(otherwise there would simply be a straight count from 1 to 575 (=587-12).
It looks indeed like it shows which old posts are being automatically deleted. That the numbers are quite the same would simply show that the old posts dates were so close, of course they are deleted (six months later) almost at the same time,
BUT,
if it was the case, there would never be LESS deleted posts between two StillOnlinePosts, like it happens for example between my StillOnlinePosts #557 and #561.
Please note: of course I stick to the same method to make all my counts. Not manually modifying the URL, just using the default Next-Next-Next- clicking...
Modifying URL would add yet more differences in the differences!..
Dear Hosts,
Too bad it doesn't help looking yourself at my "My Posts", as everything changes each time I'm adding a reply somewhere.
Perhaps a good way to troubleshoot this would be to start from a very simple basis:
--> "name" the posts with a number, starting from the oldest.
This way, for example my "#1" post (11-Dec-2005 21:51 GMT in this thread) would be named "221" in the New Discussions, or "2667" if you start from my Registration date.
At the moment, it is very difficult to figure what fault comes from the "#100 post bug" and what fault comes from another possible counting bug...
Then the New Discussions "fluctuating" refreshing delay too, possibly messes the counts...
Thanks!
Axl
223/2669

My thread is gone! Is it undesired to post bugs about Oracle Products here?

A few days ago i posted a thread here about a bog in ODP.NET Driver 10.2.0.2.10 Beta
Now this thread seems deleted.
Is it undesired to post bugs about Oracle Products here?

Thank you Mark for the info.
The practise to delete posts without any comments casts a damning light on Oracle and can gives the impression that oracle the way of repairing bus is to hide them.
For a cutomers like me that invets time to analyze issues in oracle software and invets time again to post them here to help Oracle it is very disappointing to see that my posts are delete without comments.
Oracle should think about that mistreating their customers is not a fine way. This is unsuitable for giving custumers the feeling that Oracle is intrested in their problems.
The right way would be to delete the content of a post intead of the complete thread and give a small comment why it has ben removed.
Sorry for this harsh post, but in the last monts i am more and more disappointed about the faultiness of Oracle products, the slowness of Oracle Support and the false promises regarding to meeting deatlines.
I have the feeling to be on a sinking ship with Oracle.
This Forum here is sometime a ray of hope but the rest of Oracle...

MacbookPro2.4GHzi5 8GB1333MHzDDR3.LION10.7.2.UPDATED. Thunderbolt problem. Correct cable Apple TB HDI converter. Daewoo19"HL92QWA not found. TB Port drivers or other solution please anyone?

MacbookPro2.4GHzi5 : 8GB1333MHzDDR3 : LION10.7.2 UPDATED.
Thunderbolt problem.
Correct cable Apple TB>HDI converter.
Monitor: Daewoo19"HL92QWA (analog or digital) not found by system.
ThunderBolt Port drivers up to date. >> but must be the problem... Any solutions please anyone?
Have reinstalled LION to see if monitor was found before TB driver update. Not found!
Have tried every combination of turning on monitor and rebooting system.
Next logical step: pouring water (with a suspension of copper particles - of course) into computer!
Please help as this computer was only bought on the basis that a secondary `big` monitor could be attached!

Been reading more of the posts that relate to this problem....
Looks like this is a wasted thread!!!
Thanks Anyway!

Java for OS X 2013-005 Update Damaged 10.8.5

This specific update wrecked a lot of fundamental functionality on my Mac Mini with OS X 10.8.5 volume. I have use the repair partition to reinstall 10.8.5 with NO improvement of the problem. The volume has been repaired by both Disk Utility and DiskWarrior with NO improvement of the problem. The Finder prefs have been removed with NO improvement of the problem. Sleepimage and swapfiles have been removed with NO improvement of the problem. Zapping the PRAM made no improvement in the problem.
Here are some symptoms:
- Finder can't boot any application.
- No Dock.
- No desktop picture, just gray.
- No virtual desktop spaces.
- No Mac anything in the Menu Bar. No system preference functions in the Menu Bar. Only separate applications show up in the Menu Bar.
If I log into my account and hold down the Shift key to stop login items from loading, I get just the cursor and the gray background. I get nothing else. The Finder doesn't even boot.
ALL of the above was caused only by the Java update. I had restarted this volume just after installing the Java update. There have been no other problems before the update. The system had already been repaired before the update. I cannot find any other factors involved.
I'll be attempting other tricks to see what can repair the damage, such as trying to get at the account's cache files and dumping them. For the moment, it's important to document that this damage can be the result of the update.
If folks would like to suggest further repair tricks to try, please be certain you have read through what I have already attempted in order to avoid redundancy. Thanks.

Thanks for a good idea macjack! It didn't solve the problem, but I gave you credit for helping, like you need more points! You're a great asset around here.
Your suggestion got me thinking about going after something deeper in the System folder and root Library folder. The problem wasn't any of the account's Login Items. I had already checked that out by using 'Safe Mode' for just the account. Using 'Safe Mode' for the root account, however, was another matter! THAT proved to solve the problem! IOW: When I booted the root account into 'Safe Mode', (via holding the Shift key during boot) the problem was gone.
Therefore, I got to work removing various bits and pieces in the root account and rebooting. Eventually I dug out whatever has been causing the problem and am now fine!
Narrowing down the source of the problem is going to take some time as I have to gradually add back what I removed until the problem arises again. I don't want to go through the gory details as I test. But I will, for the moment, state that none of the System/Library/Extensions foreign KEXT files was to blame. They contributed nothing to the problem. What I have pulled at this point includes all of the following that are not Apple's own:
- All PreferencePanes (in /Library and ~/Library just to make sure)
- All Startup Items (in /Library)
- All LaunchDaemons (in /Library)
- All LaunchAgents (in /Library and ~/Library just to make sure)
- All Fonts (in /Library and ~/Library)
- All QuickTime components (in /Library/QuickTime)
Something among the above, foreign and not Apple's, caused the problem. It's going to be interesting to work through them all and discover what. I am going to guess that whatever it is has something to do with Java and the changes made by this Java update. But we'll see.
For now, I have other work to perform. But I should have the antagonist identified this evening and will post the results here.

Does 7.01 update solve your problem?

I haven't updated to iTunes 7 because of all of the reported issues.
So I just thought I'd inquire about whether the update solved your problems or not. Let us know if things are fixed or still buggy.
D
Mac OS X (10.4.7) Titanium PowerBook (15")

I have to start by saying that I didn't have the problems that many people talked about. Artwork scrolling is better, and according to the mac's Activity Monitor, iTunes 7.01 is using a lot less memory, so apparently it's more efficient.
I still have a problem when watching video (TV shows or movies). I start out at full screen, but if I try to reduce the size, the video stops and I'm left looking at the iTunes software. I have to then click the album art, then click "play", to get it to run at a smaller size.
I've tried reducing the size by (1) clicking the video, (2) clicking the "reduce" control button that shows up on the screen, (3) using keyboard shortcuts. All 3 methods give the same result. This only happens when going from full screen to other sizes. When going between other sizes (such as half size to double size), there's no problem. (I've reported this bug to Apple.)

Updates or known problems on the 10.1.3 OAS?

Hi
We are developing using OAS 10.1.3 on HP-UX PA-RISC.
When we run a load test on our jsf application the responses become very slow.
The app we are testing is slow, but also another one on the same server is impacted. For this reason we don't believe the problem is in the OC4J server.
I've been reading this forum, looking for known problems in the mod_oc4j, or the http server. I have found no relevant discussions.
How can I find out if there are updates or known problems on the 10.1.3 OAS?
Is there a package of fixes to be released? If so, when.
Thanks
Steve

Try setting P4PORT and P4CLIENT in a command shell, then launching JDeveloper from the shell using start jdeveloper.app.
If the port is picked up correctly the client dropdown should be populated and the OK button enabled. This works for me.
The same should work from the gui though, I'll investigate and see if there is a bug logged.
Thanks,
Geoff

[svn:fx-trunk] 8233: ASDoc updates post PARB

Revision: 8233
Author:   [email protected]
Date:     2009-06-25 08:55:19 -0700 (Thu, 25 Jun 2009)
Log Message:
ASDoc updates post PARB
QE Notes: None
Doc Notes: None
Bugs: -
checkintests: passed
Modified Paths:
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/IItemRenderer.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/components/List.as
    flex/sdk/trunk/frameworks/projects/spark/src/spark/layouts/HorizontalLayout.as

Given so many posts about problems, is upgrading to maverick worth it?

Given so many posts about problems, is upgrading to OS X maverick worth it?
I am content using Snow Leopard OS X 10.6.8. But my most recent Garmin GPS map updates returned a message that stated, "Mac OSX 10.6 is an older OSX version that is no longer compatible with modern software. We will be ending support for this operating system soon. To continue using Garmin Express, please upgrade your operating system."
As others have noted, you don't hear from the users who have installed this upgrade successfully. I've read about problems installing the upgrade and then incompatibilities with other applications once it is installed. Would appreciate your experience and thoughts. Thanks.

There are several excellent suggestions here.
What I did was clone my Snow Leopard drive to a second hard drive, then installed Mavericks on the clone.
I now have a working Snow Leopard drive as well as a Mavericks drive. I bounce back and forth between them.
I have symlinks set up so all my documents created on the Mavericks drive go to the Snow Leopard drive, but I have copies of all my applications on both drives. It just seemed easier...
I had to disable App Nap in both Quickeys and Keyboard Maestro, but they both seem to work well, and neither is the latest version. (Well, Quickeys is the latest version, but it's not a recent version.)
I only check email in Snow Leopard, never in Mavericks, so my Inbox is not scattered over both systems.
The Mavericks disk takes longer to boot, and it does occasionally seem sluggish, but it's not a deal-breaker. Like many, I have some legacy software I use, so I don't want to commit to Mavericks full time. But it's nice being able to use both.
I do like using Safari in full-screen mode, but that's the only program I use full-screen for.
Hope this helps.
Andy

HT4623 please help me when update my i phone 3G i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

please help me < when update my i phone 3G < i finish update but face problem , appear me msg There is no SIM card installed in the iPhone You ar attempting to activate. Please disconnect

Sounds like your phone was hacked to use with your carrier. Updating it has relocked the phone to it's original carrier. You will not get the phone working again without a SIM from the original carrier.

Blog post : "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)"

hi
Using steps 1 to 13 from the blog post "Bug in Create/Edit View Criteria Wizard (JDeveloper 11g)" by Andrejus Baranovskis, I have been able to reproduce the issue he describes.
see http://andrejusb.blogspot.com/2008/12/bug-in-createedit-view-criteria-wizard.html
I the blog post comments he writes "... there was no time for me to fill bug in Metalink ...".
Maybe someone from Oracle can pick it up from this forum post and file it as a bug if it is one (and if possible post the bug number here).
many thanks
Jan Vervecken

The mechanism is to create a reproduceable test case, create a Service Request in metalink.oracle.com, post the test case, and convince the analyst to file it as a bug.
It may be not efficient at some time, but this the way it is handled.
--olaf

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

X6 v20.0.005 update--post bugs/problems here

Similar Messages

Maybe you are looking for