X6 won't turn on just vibrates

My x6 wont turn on and just vibrates. I have tried the 4 finger reset but just does the same. Any help would be great.

Boldie wrote:
Yes I was trying to do a system software update but the phone wouldn't turn back on.
I reckon the phone suffered from a failed update rendering it unusable. I suggest sending the phone to a Nokia Care Centre in your area. They will fix it with no charge if the phone is still within warranty.

Similar Messages

  • Phone won't turn on, just vibrates when plugged in

    Last night, I plugged my phone in before bed.  It showed on the battery icon that it was charging, and the red charge indicator light was on once the display turned off.  However, by the time I woke up, the phone was dead, though still plugged in.  I couldn't get it to do anything, so I tried an old battery that I had.  Put the battery in, the phone turned on and showed a 47% charge.  Knowing that battery was garbage (which is why I got a new one; I just held onto the old one for emergencies), I put the phone on the charger and the battery icon showed charging.  Instantaneously, though (I'm not exaggerating, it was literally instant), the phone dropped to a 1% charge.  I quickly tried to turn the phone off to see if I could even get even a little bit of an efficient charge out of it, and the phone started power cycling.  I tried to stop it, but it turned itself off and on probably 20 times before it finally totally died (kind of reminded me of how sometimes an sick animal will go bat guano bonkers before it kicks it). 
    Now, when I try to plug the phone in it just pulse-vibrates every 2 or so seconds instead of showing that it's charging.  It will continue to vibrate like that for a minute or two after I take it off the charger before it finally stops.  Won't turn on in any mode, plugged in or not - I do get a flicker of the opening "Samsung Galaxy" screen before it shuts off and goes back to vibrating.  I've tried to let it charge for 30-45 minutes, but no change.  Taken the battery out, smacked it a few times, tried to charge with my computer, tried different cables/chargers, nothing helps.  I have no idea if either battery has any charge at all at this point (though I suspect not).  I haven't damaged my phone at all - no recent/significant drops, no water - but of course I'm just barely barely out of warranty.  Am I toast or is there some way to fix this?

    Thanks for your reply.
    Unfortunately, since (as I clearly noted in my original question) my phone will not turn on, I can't confirm the phone software, though I've downloaded any and all updates that I've been notified of.  I have no idea if any apps updated immediately prior to the issue happening; it's likely that some update to something downloaded not long before the problem started since I plugged in the phone shortly after I got home for the evening and reconnected to my home WiFi, but I wouldn't have any way to tell you what it might be.  My phone will not boot in safe or recovery mode either, if that helps answer if an app is causing the issue.
    I tried to take it to a Verizon store; they told me that they had literally NEVER heard of my issue before and so wouldn't be able to fix it and didn't even attempt to help, just tried to sell me a new phone, so that wasn't super helpful.  Since I had zero problems up to this point with my phone, and because I'm now not eligible for the early upgrade to the Edge program without the early termination fee because I don't have a working phone, it sure would be great to fix the one I have.  If anyone else has any advice, I'd appreciate it!

  • K7N2 Delta ILSR won't turn off, just restarts

    K7N2 Delta ILSR won't turn off, just restarts.  Every time I click on "Turn off computer" in Windows XP, it shuts down, but restarts again. Could this be OS related, or perhaps Bios related. My other machine, almost identical to this one, except that the other machine has BIOS rev 7.6 and this one 7.2.

    PSUs seem to be yr favorite subject, but I'm afraid this time it's software. I experimented some more as the problem only occured after installing the Nvidia drivers. Comparing the system settings in the device manager before installing drivers and after installing them, reveils that the problem shows up when AGP HOST TO PCI BRIDGE is installed. When killing this item the PC shuts off properly. Unfortunately when turning back on, Windows automatically reinstalls the PCI bridge and I have the problem again. LOOKS LIKE A MSI SOFTWARE PROBLEM !
    By the way I have a PCI graphics board and not AGP in the failing PC (the good one has AGP graphics).
    Now what?
    R.

  • Hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    hi my ipod touch 8gb won't turn on just get the apple sign in middle of screen and my laptop also can't find my ipod wen i plug it in? any help would be greatly appreciated thank you.

    OR use this method
    1. Press-hold the Home button (big circle below the screen)and the Sleep/Wake button (on top of the iPhone) simultaneously.
    2. Continue holding both buttons (Ignore the"Slide to power off") until the iPhone shuts off and begins to restart.
    3.You may let go when you see the silver Applelogo.
    Thats all Folks!!

  • Why mi iphone dont turn on  just vibrate?

    why mi iphone dont turn on  just vibrate?

    My guess would be that it got wet. However, without any details, all we can do is guess.
    Have you tried resetting it by pressing and holding the power and Home buttons until the apple appears, then letting go and letting it finish starting up?

  • Help!  Won't turn on, just happened over night.

    My airport extreme has been working fine.  Last night I used apple software update, only thing different then most nights.  This morning I noticed the internet was down, went to the airport extreme and it won't turn on.  No power, no light, no nothing.  The surge protector it is plugged into has all the other attached gadgets working just fine.
    Thanks for any suggestions on saving this.

    It would be logical to check the power supply "brick" to see if it is delivering the 12 volts that it should be doing if it is working correctly.  Radio Shack sells battery powered voltage testers for $10-12. Its a handy item to have around the house if you don't have one already.
    If the power supply checks out OK, your best bet is going to take both the power supply and AirPort Extreme to an Apple store to let them have a look.

  • Ipod touch won't turn on, just shows the apple logo - even when plugged into Itunes?

    I have an Ipod touch 8GB - it's virtually never been used. I have tried to charge it up but nothing happens - it just displays an apple logo. I have plugged it into Itunes but again nothing happens. Any ideas?
    Thanks K.

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • HTC One M8 - screen won't turn on, still vibrates

    I've had my HTC One M8 for less than two weeks now. The last action I performed on it was to take a picture and upload it to Facebook. Shortly after, I went to turn my phone on and nothing happened. No screen appeared. The green indicator light is still on, and when I touch the screen or adjust the volume or receive notifications, the phone vibrates. The screen, however, remains completely black.
    It was not low on battery, though I've tried charging it to no avail.
    Any suggestions for restoring my screen? Thank you!

    Sometimes things can lockup the screen/phone to where it appears to be black , but is actually extremely dimmed. Try the following to reboot your phone:
    Press and hold the POWER and VOLUME UP buttons for at least 10 seconds. The HTC One should then restart. Many people don't hold the power+volume up combination nearly long enough. Look at the seconds of a watch or similar time keeping piece while doing it - what feels like 30 seconds holding it down to you may only be 10 seconds.

  • My screen won't turn on - just blank with Apple logo and rotating little gear thing

    I unplugged my computer abruptly during a big storm and didn't log off or shut it down first. Now when I turn the MAC on all I get is a blank screen with the apple logo. I have tried a couple of fixes from the book like holding down option key but nothing is working. I called support and the young woman just read the same stuff from the manual.....I can't get a store appt. until Friday! (And I have protection plus which right now is seeming like a waste)

    Hi.
    Power off the computer by pressing and holding the power button... takes about 10 seconds.
    Reboot, and right after you hear the startup chime, press and hold the Option key.  Are you presented with a screen that shows the startup ard disk and OS X version?
    If so, click it and press <enter>.
    Does your iMac boot up properly?
    If not, power it off again as above.
    Reset the SMC
    • power off
    • disconnect both ends of the power cable
    • wait 30 seconds - min.
    • plug in the power cable - wait 5 seconds min.
    Reboot.  Any change?

  • My 4th gen iPod won't turn on, just plays the shutting down screen forever

    I have a 4th gen ipod, 8gb, and it hasn't really given me problems until the past few days, it's been crashing constantly and freezing. Now it has shut down and when I turn it on it is just stuck on the shutting down screen. I've tried holding down home and power, it shuts off, then just turns right back on and does the same thing. I drained the battery, and it showed the normal screen for being dead, then when I plug it in, it starts up with the shut down screen again. Something similar happened to one of my friends so she just wrote it off as being "completely dead" and gave up. (But I don't want to just give it up because basically my only pictures of my cat that passed away are on it, and I don't have iCloud) Also, I thought maybe it was because my version was 5.1.1, I never updated because I didn't want the youtube app to be gone. Is there anything left I can try or is it completely done for?

    I had the exact same problem with my ipod and the way i got out of it was i connected it to my pc - mac works too.- then when it turn on i held only the power button for about 10-60 seconds until it finally shutoff then i basically put it in dfu mode ( if you don't already know what it is and how to do it i will explain that after) and my pc recconized it in dfu mode and after waiting about 5 min unplug from your pc or mac and if it doesnt already show the power screen on then turn it on and it should work if it just goes to recovery mode then repeat the steps for putting it in dfu mode just without pluging it in.
    Here's how to put it in DFU mode. First just hold the power and home screen botton for 10 seconds or until you see it flash. Next you let go of the HOME BOTTON ONLY while still holding the power botton down for a good 20-25 seconds then you can let go and your done!   *Note: if you have it plug in to a pc or mac you will also see something saying your pc/mac is recognizing your ipod in DFU mode.
    Hope it helps with your problem! (^∇^)

  • IPhone 4s won't turn of just reboots unless it is charging anyone else have this problem

    Recently I tried to turn off my iPhone 4s because I was in a meeting and I noticed that it just rebooted, so I tried again and again and it just kept rebooting and wouldn't turn off. The only way it will turn off is if I have it charging then it will shut off. Is this normal?

    I'm having the same issue.... Any update on this?

  • Eos-m LCD screen won't turn on

    The camera works, allows me to take photos, however the lcd won't turn On just stays black. So i have no view of what I'm taking photos off. The touch sensor works as it makes the usual noises and allows me to take photos touching. Any idea why the screen is getting no image at all, not even menu? Thanks!

    Will any buttons activate the rear LCD screen (for any purpose)?  e.g. can you press either the "Menu" button or the "Info" button and get a display?
    On EOS DSLRs the "Info" button cycles through several choices to display on the rear LCD and one of the choices is to just have it off -- but that's because regular DSLRs have a viewfinder.  The button simply keeps looping through the choices.
    But on the EOS-M there is no viewfinder and I didn't think there was an option to disable the LCD when the camera is on.
    Tim Campbell
    5D II, 5D III, 60Da

  • My Xperia Z1 won't turn on and keep vibrating when connected to charger or PC

    Hello, my xperia z1 battery was drained off. i charge it with a galaxy charger but it didn't work then after went home i charged it with the original charger and tried to turn it on but it didn't, i left it over the night to charge then i woke up on a 3 continuous vibration sound, it kept vibrating till i disconnected the charger but it didn't turn on at all.. and every time i tried to put it to charge or connect it to pc with its USB cable it keep vibrating till i disconnect it. i don know if this could caused the problem but i used it to film videos in the pool but it was working very fine after that for more than 3 hours then when the battery was totally empty this happened. i tried mostly everything. i tried pressing volum up/down with the power button, i tried the red button beside the sim card slot, i tried connecting it to the pc with PC companion running repair but nothing work. it won't turn on, nothing from the LED indicators, just RED & Blue flickers appear wehn connecting to charger or to PC with the USB cable. anyone can help with anything that could solve this problem. ThanksMahmoud

    Try to follow these steps: perform a software repair using PC Companion.The process will erase all internal memory.You might need to charge your device for about 1-2 hours before so the device has at least 80% battery.
    Make sure the device is not connected to computer or laptop and turned off (sometimes you have to press power button and volume up until the device vibrates 3 times or on some devices you have to press the small button near the SIM tray or on the back of the device).
    Open PC companion->support zone->phone/tablet software update->repair my phone/tablet blue highlighted.Follow the steps given,do not connect your phone until prompted to press volume down while plugging USB cable. If PC companion does not start the repair process, you might need to run it in compatibility mode with Windows 7 (in some cases XP).

  • My iPhone 5 won't turn on, the screen just stays black!

    My iPhone 5 won't turn on I have held the power button to see if it's dead or not and it doesn't seem to change the screen it just black I thought the battery could of died or something similar it only happened about 2 hours ago please help!

    Hey Thermali,
    Thanks for the question, and great troubleshooting so far. To completely isolate the issue, you may want to follow these steps:
    Will not turn on, will not turn on unless connected to power, or unexpected power off
    - Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
    - Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion.
    Learn about LCIs and corrosion.
    - Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    - After at least 15 minutes, if:
                   - The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
                   - The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
                   - Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
    - If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
                   - If the display turns on, go to step 4.
                   - If the display remains black, go to next step.
    - Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to
    restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    - If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
    For additional information, see this article:
    iPhone: Hardware troubleshooting
    http://support.apple.com/kb/TS2802
    Thanks,
    Matt M.

  • My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(

    My iPhone 4 won't turn on unless I plug it in to a charger it says the battery is 100% and that I need to conect to iTunes when I plug it in to my computer it just comes up with a flashing apple logo :(

    The terms of service of the Apple Support Communities prevent us from helping anyone with a jailbroken phone.
    You're on your own.  Good luck.

Maybe you are looking for

  • Itunes and windows installation prob...

    I had an older version of itunes and tried to upgrade to 7.1. Everytime I try to download it, I click on the 'itunes setup' icon on my desktop and a 'windows installer' window pops up with a bunch of info that I don't understand. I uninstalled the ol

  • Office 2013 for Mcbook !!!!

    Hi all, i need to know the best way to install office 2013 for mc book??? i just purchased office 2013 personal online, and don't know how to install it? and should i recieve a tangible CD pack or i can istall it online? trying to reach the lousy sup

  • Delete Previous Version - file associations

    Have a question on file association problems when deleteing previous version of PS. For example user bought CS5 and  installed.  File Associations now changed by defauilt to CS5. If user un-installs CS4, the file associations now revert back to CS4,

  • Tab and option settings

    i am baffled by sudden difficulty setting tabs options so windows display correctly, and i don't understand any of the article explanations. I've noticed from using POGO that suddenly when trying to open a game table in spades, the table window is no

  • Input and output varaiables are not shown

    Hi, I am using BICS connectivity to connect to a BeX query from Xcelsius. I am able to logon to SAP use datamanager conn and also able to select a query. But after that the query input and output variables are not shown. Instead all those fields are