X60 Blue Screening during Startup

Hi,
My X60 currently goes to the blue screen every time it gets into the Windows loading screen. I can't run safe mode, last known configuration, etc. without it blue screening either. I've run the built in Thinkpad diagnostic software and nothing fails. I've been told this may be a hard drive issue, but would appreciate any other advice.
Thanks

This just happened to me. Are you running Svc Pack 3? If so you'll have to restore to factory install - load up in safe mode to save your personal files then reimage.
Annoying, but went smoothly for me

Similar Messages

Getting light blue screen during startup for 3-5 Seconds

I get a light blue screen during start up for about 3-5 seconds. It shows the spinning image for loading, once its done that goes away and then it goes light blue for couple seconds then back to the white page with the apple logo then brings me to the user login page. It also takes longer then usual to start up, load dock and the menu bar. I've read around and it seems people are saying its normal? but this just started happening.

Which model Macbook Pro do you have?
It also takes longer then usual to start up, load dock and the menu bar.
How large is your hard drive and how much hard drive space do you have left?
Go to your Account/Login Items and get rid of all you do not need.

IBook G4 Freezes at Blue Screen During Startup.

iBook G4 933 MHz
Mac OS X 10.4. Tiger
640MB RAM
40GB internal ATA hard drive
Computer boots but then quickly locks up.
If I immediately restart, then the iBook hangs at the blue screen before the Mac OS X progress screen appears.
If I remove the battery and unplug the power cord then allow the computer to sit for at least 30 minutes, able to fully boot, but then the machine quickly freezes up.
I assume the problem is heat related?
I have so far:
- Totally disassembled/reassembled
- Reset PRAM
- Reset NVRAM
- Reset PMU
- Unable to do target disk mode
- iBook freezes same way when booting to Mac OS X install DVD
Able to boot to shell command line mode no problem.
FSCK reports no issues with the HDD.
Sometimes during startup a fan turns on briefly, but not every attempt to boot.
Yes-- I know about the 'solder' issues with iBook G4 logic boards, but I do not think the above is related. The VGA works fine.
Thanks for any assistance that can be rendered.

After a month, I have been notified by Superior Reball that the logic board has been repaired. I promptly made payment of $35 and the board was shipped back to me on June 17 via USPS Priority Mail Delivery Confirmation. I have received the tracking number and anticipate receiving the package by June 20.
In my situation, well worth the wait for only $35.
Even though I chose to totally disassemble the iBook, Superior will do the disassemble/reassemble for $75.
I would not have done it by shipping the entire iBook, though. With the higher shipping cost, insurance, having to send out the hard drive with no back up, the higher repair cost, etc.-- in the end a prohibitive expense. I could probably buy a used iBook G4 for no more than $200, to put things in perspective.
In summary, Superior Reball had a great price, good enough communication (they answer the phone, but not e-mail) and it looks like fast return shipping. It took a lot longer than the ad states, so I am applying the old 'price, speed, quality-- choose any two' rule here.

Lenovo 3000 N200 - Blue Screen during Startup

I have a 3000 N200 laptop running Windows XP which has begun showing a blue screen error then restarting during startup.
When turned on, it shows the Lenovo logo page then a page saying Windows did not start successfully last time. When I choose to start Windows in both normal and safe modes, the XP startup screen comes up then a blue screen flashes up for 1/2 a second then it restarts. I disabled restart due to system failure and read the error code, details are below:
UNMOUNTABLE_BOOT_VOLUME
Technical Information:
*** STOP: 0x000000ED
(0x86F5F030, 0xC0000006, 0x00000000, 0x00000000)
Choosing to start with command prompt loads files up to...system32\drivers\mup.sys, then freezes and restarts.
I have tried to enter the rescue and recovery using the LenovoCare button and F11, but this begins to load then freezes on the first screen.
I rang Lenovo and they sent recovery discs but these have not worked, bringing up the Rescue and Recovery first screen with the Boot CD and freezing as with the LenovoCare/F11 buttons.
I will be ringing Lenovo again tomorrow but any advice in the meantime would be much appreciated.
Message Edited by SuperstarDiver on 09-02-2008 08:51 PM

OOPS!!
Thanks for the PM, I made a mistake and inserted the wrong link
This is the correct link which I meant to post. It's a link from this site which you may want to add to your favourites.
Sorry
Andy ______________________________________
Please remember to come back and mark the post that you feel solved your question as the solution, it earns the member + points
Did you find a post helpfull? You can thank the member by clicking on the star to the left awarding them Kudos Please add your type, model number and OS to your signature, it helps to help you. Forum Search Option T430 2347-G7U W8 x64, Yoga 10 HD+, Tablet 1838-2BG, T61p 6460-67G W7 x64, T43p 2668-G2G XP, T23 2647-9LG XP, plus a few more. FYI Unsolicited Personal Messages will be ignored.
Deutsche Community Comunidad en Español English Community Русскоязычное Сообщество
PepperonI blog

Can't get past the Blue Screen during startup

I decided to upgrade the 4/8/08 firmware on my aluminum bluetooth keyboard this afternoon using my mac mini. Shortly after the procedure started, something happened to the keyboard and it could not complete the install. I tried a second time, but again no luck. I then decided to replace the keyboard batteries and try again, but I was no longer able to connect the keyboard to the mini.
I decided to restart the computer and try the whole procedure again. But after the grey screen comes up with the Apple logo, the mini went to the blue screen with the spinning gear, then the mouse appeared in the upper left hand corner, then a little later the gear, then nothing, then the mouse, then the gear... I could never get past this blue screen.
I plugged in a wired keyboard and was able to startup 10.5 using the install DVD, which allowed me to check and repair the permissions and the disk. After a restart, still stuck on the blue screen.
I tried zapping the pram. Still couldn't get past the blue screen.
I was not able to start up in safe mode (is the timing critical for when to hold down the shift key?)
I started up in single user mode and attempted to move the preference files as described here:
http://docs.info.apple.com/article.html?artnum=106464#symp1
but got an error that I did not have the correct permissions. I assume that is because I was trying to save the preference1.old (and preference2.old, etc) files to the root part of my hard drive.
Any suggestions? Does it make sense that upgrading the firmware on a bluetooth keyboard could take down the whole computer???

Disconnect all peripherals from your computer.
Boot from your install disc & run Repair Disk from the utility menu. To use the Install Mac OS X disc, insert the disc, and restart your computer while holding down the C key as it starts up.
Select your language.
Once on the desktop, select Utility in the menu bar.
Select Disk Utility.
Select the disk or volume in the list of disks and volumes, and then click First Aid.
Click Repair Disk.
Restart your computer when done.
Repair permissions after you reach the desktop-http://support.apple.com/kb/HT2963 and restart your computer.

My mac pro only shows a blue screen during startup? how do i get out of this to the desktop?

Cannot access the desktop, only the Apple sign and pinwheel icon come on, after a couple minutes it goes to blue screen only. Have held shift during bootup to start in safemode, but this doesnt even allow you to choose safe mode. Please help.

Try holding option+Apple Command + s keys to get into single user mode. May be a little unnerving as it will get you to text based screen. Grab a pencil and paper and copy the commands that are listed also pay attention to the spaces.
/sbin/fsck -fy <return>
If the it says File System Modified hit the up arrow key it will repeat the line you typed. Hit return.
If it DOES NOT say modified then type in the second line.
/sbin/mount -uw /<return>
At the prompt type reboot<return>
Let us know if it helps.
Ciao,
Lou Cioccio

IMac Freezes on blue screen during startup after installing itunes 9.2

I let iTunes update to 9.2 today on my 27" iMac quad and when it restarted itself it froze on startup at the blue screen. The blue screen switches between two different shades but never exits that loop. I CAN boot in safe mode (which is what i'm doing right now).
Thus far i've tried:
- reinstalling itunes
- resetting my pram
- uninstalling itunes
- removing itunes startup app
I still cannot boot normally. Help!

You might try booting from your install CD and running disk repair in Disk Utility.

OSX 10.5.8- Stuck at blue screen during startup

After the Apple logo appears the screen goes to blue and stays there. I am also running BootCamp and can access Windows with out any problem, but I cannot get to the login screen for OSX. I have already reset my PRAM, reset my SMC, removed all ApplicationEnhancement files (I actually didn't have any), and started up in Target Mode from another computer and done a disc repair. I can access all files in Target mode without a problem. I have not archived and tried re-installing Leopard, I'd like to try and avoid this. I am also using a third party internal hard drive, but only for storage, this is not my startup disc. Does anyone know any way I can fix this?

Start with http://support.apple.com/kb/TS1545

Grey, red, green, blue screen during startup

Hi,
today my macbook 13" unibody was working well. Then I put it in sleep mode and after it woke up I got grey, red, green, blue, vertical stripes, horizontal stripes screen. I tried to reboot my macbook and always the red, green, blue loop. I tried a cmdoption+pr boot with no results. I then tried to remove the battery and push the start button for 5 sec. but no results again.
I've tried to boot with the C button and the installation disk but I got always the red green blue loop.
What else can I do to solve the problem?

We are experiencing the same issue on a Macbook A1278 13.3" Aluminum Notebook. Has anyone found a solution to this issue? Thank you.

What would cause a prolonged blue screen during start up?

I have an iMac desktop. Recently I've had trouble with a prolonged blue screen during start up (approx. 10 mins) before it finally takes me to the login screen. Any ideas why this is happening?
Jeff P.

Hi Jeff,
Open console in Applications>Utilities, check the system log for the date/time of the last problem Startup for clues.

Blue screen at startup---have tried EVERYTHING!!! Any ideas???

Hi there, I've got a really frustrating problem concering my husband's iBook G4. One day he got home from work, tried to start up, and got only a blue screen (no cursor.) (This is shortly after updating to 10.4.11, incidentally...coincidence?) We went to the forums, and tried numerous fixes, including:
Booting from install and running disk repair (none needed)
Booting in target disk mode with my mac and removing the login.plist file
Removing all login items from both user accounts in target mode
Attempting a boot (and eventual restore) from the external firewire backup, but it won't get past the blue screen here, either.
It started up in safe mode a couple of times, and even restarted in normal mode once, but then in primary account froze back up after a few minutes. Then it wouldn't even start in safe mode.
Then we did an Archive & Install from the original startup (Panther) but when it got to the login screen, it wouldn't accept either user password (even though the hint indicated we were using the right ones) and then froze. It now won't even boot from this disk, or start up in safe mode.
Everything seems to be intact while perusing it in target disk mode; even ran a hardware test from the Apple Hardware Test disc and that all checked out (no idea if this would have made any difference, but I'm grasping at straws, here!)
I know we did a couple more things suggested in the forums/support pages, but I can't remember what they are at this point...my brain is fried! (Also remember following Apple's instruction's for what to do when you get a blue screen at startup...tried this first thing to no avail.)
Soooooo...any suggestions or ideas? We would greatly appreciate the help!
Thanks so much!
Jennifer

Hi Jennifer,
Ok, so...what's going on today is that Leopard will open to the login screen (sometimes I can log in but generally not), but then the cursor is frozen, as is the keyboard (can't type to login or use shortcuts) and even a usb mouse doesn't work. The only thing I can do is power down with the off button, and upon restarting, if I get past the login, get the message "Computer was restarted after Mac OSX quit unexpectedly" or something like that. (Just restarted from frozen login screen and got blue screen again.)
Wondering if it's Leopard or my wonky install (we started up in target mode, with the install disc in the drive, and opened the installer on my mac, then chose the broken mac hd to install to. Seemed to work, but may this be related to the driver issue you mentioned?) We did it this way (after doing a zero-out erase) because it wouldn't even start up from the install disc itself.
It sounds to me like this method of installing is okay. If you did not have the correct drivers, you could never get as far as you do in Leopard. I am wondering why you install with the disk in your Mac and not in the iBook.
Anyway, have reset the PRAM, still no luck. On the apple page regarding this procedure they mention a power management unit reset for ibooks...would this correspond at all to our problems? Is it something I should try or steer clear of?
Okay. Resetting PRAM was a long shot, but worth trying. I would steer clear of trying to reset PMU. That is related to sleeping, waking and such things and your problems do not seem to be related to that. Also, I have never reset PMU, but from what I recall, it sounded a bit tricky.
Am now attempting to reboot from backup. And yes, when I open Startup Manager, the internal hard drive DOES show up. If that means anything. Have a bootable backup (created with SuperDuper) which also shows up, but when I try to start up with it, I get stuck at blue screen (still.)
As far as the iBook hard drive is concerned, this is a good sign. I am thinking that perhaps the hard drive is okay and the problem is something else.
So, since the iBook originally came with Panther, and Leopard is really yet another unknown to throw into the loop, if I do another erase/install, I'm thinking Panther is the way to go? (Unfortunately we shared a family pack Tiger with a friend, and haven't got a hold of that install disc yet, otherwise I'd try Tiger, since it's what it was running and so is what the backup is, too.)
From what I have seen in the forums, when people are having startup problems, the last resort solution usually works. That is, they take the install disk that came with the machine (Panther in your case), erase and zero out the hard drive and then re-install. That usually seems to do the trick. What they have probably done is either replaced some corrupted piece of software or fixed a directory problem on the disk. In your case, you have already done most of this except not with the Panther disk. So, I think it is worth going through this effort with Panther. If this actually worked, then you could worry about how to update your software to where you want it to be. If it does not work, I would consider this more evidence that there is probably a hardware issue.
If this doesn't work (and would probably have to try in target mode again if the install disc won't open...) should I buy Tech Tool or Disk Warrior or just send it in for repair? I suppose there's a point at which I'll have to admit defeat!
Not sure that I caught this before. You imply that the install disk will not open if it is inserted into the iBook. Is this a problem that showed up when the blue screen business started? When you insert the disk into the iBook and then reboot that computer from the disk (pressing the C key during startup), do you get something on the desktop?
If, when repairing the hard drive with Disk Utility, you had received a message that the disk was not repaired, then a stronger utility would be a reasonable choice. But, that does not seem to be your situation. So, if it were me, I would probably not buy Tech Tool or Disk Warrior at this point. I do think that it is possible that these utilities might be able to do more troubleshooting than you can do with Disk Utility and the Apple hardware CD. Tech Tool in particular has some hardware testing capability. So, if money were no object, you might buy that and see if it can give you more detailed diagnostic information. Of course, these are purely my opinions. I could be totally wrong on any of this.
Oh yeah, I don't know if I mentioned this earlier or not but all the restarts yesterday were accompanied be a brief "whooshing" sound (like a fan) for a second or so, and once I got both that sound and a "boooooop" issuing from the innards. Not sure if this means anything or not, but thought I'd mention it. Maybe the hard drive is melting! (Also I get further along the startup route after it's been turned off for a while.)
This is worth mentioning and I overlooked it in your previous posts. The "booooooop" sound got my attention. When the computer is started up, one of the first things that is done is that there are some hardware tests performed. Apple does use some sounds to indicate certain problems. You can learn a little more at You hear "breaking glass" or "musical beeps" when you turn on your Mac. I don't know if you are hearing one of these sounds or if they are unrelated. But, I think that the "boooooop" sound in particular might be trying to tell you something.
Let me sum up my opinions (which could be dead wrong). I still suspect a hardware problem. However, maybe the hard drive is okay. I think it would be worth using the Panther CD to do another erase and install on the iBook. If you still do not have a working computer, it is probably time to seek professional help. (However, if you get to this point, it is conceivable that you could be having some problems with your RAM chips. If you have worked with RAM chips before, you could try to play games with them: reseating them and removing them one by one- if you have two chips. But, if you have not done this before and are do not have some familiarity with working on hardware of this nature, perhaps you should just leave this alone.)
If you need to seek some professional help, you might be able to try one of these options - If you have AppleCare, you should definitely give them a call. If you live close enough to an Apple store, you could take your computer to the genius bar and see if they can help.
Sorry that you are having such a hassle,
Rich

Quick blue flash during startup

My macbook pro is making a quick blue flash during startup when it's at the apple logo. Not blue as in blue screen but a transparent type of blue I would say and it's just for a moment. Is that a symptom of something? It started a couple of months ago. I have no other problems with my macbook pro. I might add that this is not a real problem for me as a user, but I am a bit concerned about it, that's all. (I can look away if I want to and feel better about it)

Hardware tests can only detect hardware problems that they are designed to detect. I think you may have a hardware problem that is not able to be detected by Tech Tool Deluxe. For example, a bad connection somewhere may not be detected.
Here is a test that is supposed to be better at detecting RAM problems:
http://www.kelleycomputing.net/rember/
Check to see that your RAM is well seated and that all of it is recognized. Faulty RAM or poorly seated RAM can be a factor in kernel panics, and often RAM problems are not detected by hardware tests.
Also, check the S.M.A.R.T. status of your drive with Disk Utility.
Your difficulty doing a clean install of the OS does point to a hardware issue of some kind.
Unfortunately, it's probably time to call Apple for a diagnosis and repair under warranty. If you have a hardware problem, which I think you do, there is really no way to fix it other than to turn it over to Apple or an AASP for a warranty repair.
Good luck!

I am getting frequent lock-ups and blue screens during boot up. The lock ups occur during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button. Ideas?

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

I am getting frequent lock-ups and blue screens during boot up on my Mac Pro. The lock- ups occur sometimes during normal use and I cannot click anything or force quit. The cursor shows something is loading, but never stops. I have to use power button.
I had the Mac Defender malware and I have used apple jack but still having issues.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

X60 Blue Screening during Startup

Similar Messages

Maybe you are looking for