X60 - does not detect wifi anymore

Hello,
my ThinkPad X60 does not wifi anymore (but my other ThinkPad does properly).
My wifi network card (Intel Pro/wireless 3945ABG Network Connection) seems to work (no error message).
I have the issue since I used a 3G connection (through USB key).
I've uninstall the 3G connection software and restored my ThinkPad with Rescue & Recovery...no success..
Note : I cannot connect through my cable LAN neither (greenlight on the connection but no network...)
Could anyone help ?
Merci !!
Camille

finally found the link to download itunes 9.2.1 and after reinstalling it works ok:
http://support.apple.com/kb/DL1056

Similar Messages

  • TS1398 my phone does not detect wifi at all

    my phone does not detect wifi at all. what should i do? i did everything from turning it off to resetting my phone.

    try a hard reset and charging it. then get it replaced through apple

  • HT4623 iphone does not detect wifi

    I have factory unlocked iphone 4s. It can not detect my home wifi. I tried every possible alternatives ...resetting, restarting. Nothings working. It can detect other wifi in the range. My wifi is in good condition. I am using this from my laptop. But only my phone does not detect this connection ?
    Please help me out.

    WE're going to need a bit more... what steps have you tried... what if any error messages do you get... at what step in the restore does it get blocked.... what happens,,, does it freeze, black out, not restart etc...

  • Boot camp does not detect windows anymore

    hello
    i have an iMac, osx Lion, i was using boot camp for windows xp, the cmd button did not work for some time and since i had to access some info on osx and was fed up with pushing over and over again the cmd on start, i went to windows control panel and changed the default opt on startup on osx.
    after that the only option remained was osx lion, nothing shows windows partition anymore except the space on disk that is used but cannot be accessed. I would really need to access that, i have lots of stuff there i also use windows on mac for playing a game which sadly does not work on osx (League of legends). I tried using cmd+r, nothing happened. I am very sad and dissapointed, please someone help me.
    with best regards,
    me

    you still have not clarified if you used BCDedit or repair the MBR
    Whether you used an NTFS driver - that may be all you need - try the full functional demo Paragon NTFS for OS X, it is great at mounting PC NTFS volumes and cases.
    http://www.paragon-software.com/home/ntfs-mac/
    There is no such thing as "boot camp" to detect Windows. Poor language. BCA partitions. Do you want to remove XP partition? that is the tool.
    Boot Camp control panel in Windows that has a Startup Disk style feature.
    But "boot camp" means zilch other than installing a set of drivers and the creatiion of a partition.
    Of course Lion Recvovery only works with OS X, not XP. There is a hidden feature to show all partitions and their health but nothing more.
    Backup everything and rebuild and restore.

  • PC suite does not detect E61 anymore using bluetoo...

    PC suite used to be able to connect with my E61 using bluetooth. Out of the blue PC Suite failed to detect my phone even though the PC detects the phone and the phone pairs with the PC. Cable connection works fine, so I can live without it, but I would like to use bluetooth if possible. I have just updated PC Suite to 6.82.22 and also updated the E61, but the phone is still not detected. Any help would be great.

    Open Nokia Connection Manager -> what BT connection is active?
    Anyway, disable it and then active it from Nokia Connection Manager...can you now see your phone (wait e.g. 2 minutes)?
    If not, click PC Suite > Get Connected and try search your phone -> Can you find it??

  • E66 Does not detect tones anymore

    I recently purchased an E66 and set the tones that I liked etc.
    I then added a new memory card (4g). When doing this I copied all the contents of pre-packed card to the new 4gig card.
    Then the problem occurred.
    Problem #1: All pre-installed ring-tones (aac files) have been deleted from the phone.
    I downloaded the specific tone I liked and loaded a ton of MP3s to the phone. Tones to the phone memory, mp3s to the memory card.
    I also duplicated one mp3 that I use as an alarm tone to the phone memory. All music is appearing in the player.
    Problem #2: When I try and set the ring tone/message tone/alarm tone etc. there are only 3 options, download, default and none. For sone reason the phone can no longer detect any of the installed audio files to use as tones.
    Attempts to resolve:
    - Full reset to factory
    - Re-install firmware
    No success to date. This is a strange and extremely annoying issue.

    finally found the link to download itunes 9.2.1 and after reinstalling it works ok:
    http://support.apple.com/kb/DL1056

  • HT4437 hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    hi even when i connect my macbook and apple tv to the same wifi network i cant put on the air play mirroring option.my airplay mirroring option does not detect any device.what can i do for this?

    See
    http://support.apple.com/kb/TS4215

  • HT2644 My MacBook Air does not detect my WiFi

    My MacBook Air does not detect my WiFi since I updated it yesterday 29th September 2012. Tried everything. Hardware test shows no trouble found. It detects all networks around me just not mine. Thank you in advance

    Troubleshooting Wi-Fi issues

  • AirPort does not detect networks, unless another network connection is made

    I've just done a clean install of OS 10.5 to see if this problem was software related, but it persists.
    AirPort does not detect any network the computer is near (tested in various locations) normally, but when connecting to a network via Ethernet or to another Mac via Firewire to use network sharing, it can update and load web pages as normal. A strange quirk I've noticed though, whenever connecting with ethernet or firewire, AirPort will suddenly detect the network! It still can't quite connect to WiFi properly though. While still connected through firewire or ethernet, it will have no connectivity through a self-assigned IP. If it is disconnected from ethernet and firewire again, the wireless network will still show up in a re-scan for networks but it will fail to connect.
    I've opened the computer up to ensure that the airport extreme card is seated properly as well, and that the antenna cable is secured properly.
    Any ideas as to what the issue is? Should I look into replacing the AirPort Extreme card?

    Got no answer on my original post, so I went ahead with ordering a replacement AirPort card on eBay (item #130487488014). Once installed, the iMac was able to detect and connect to networks normally... but was still unable to load any web pages. I tried on secured and unsecured networks as I did previously, and plugging directly into the router and into my Macbook Pro via firewire, with the same results as before. Safari loads pages when connected with an ethernet or firewire cable, but will not load pages on WiFi alone. I can attempt to access a router setup page via WiFi, and am prompted for a username/password, but the page itself never manages to load.
    Any clues as to what may be going on here?!

  • Ricoh PCIe SDXC/MMC Host Controller does not detect SD cards

    Hi,
    My Lenovo Thinkpad X230 has an integrated 4-in-1 SD card reader (SD/SDHC/SDXCMMC), but it does not detect any card I insert. The two cards I have are working correctly under my sister's MacBook. My kernel version is 3.6.10. Here's the output of a few commands :
    lspci -k
    00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i915
    00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: xhci_hcd
    00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: mei
    00:19.0 Ethernet controller: Intel Corporation 82579LM Gigabit Network Connection (rev 04)
    Subsystem: Lenovo Device 21f3
    Kernel driver in use: e1000e
    00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: snd_hda_intel
    00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
    Kernel driver in use: pcieport
    00:1c.1 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 2 (rev c4)
    Kernel driver in use: pcieport
    00:1c.2 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 3 (rev c4)
    Kernel driver in use: pcieport
    00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ehci_hcd
    00:1f.0 ISA bridge: Intel Corporation QM77 Express Chipset LPC Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: lpc_ich
    00:1f.2 SATA controller: Intel Corporation 7 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: ahci
    00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: i801_smbus
    02:00.0 System peripheral: Ricoh Co Ltd PCIe SDXC/MMC Host Controller (rev 07)
    Subsystem: Lenovo Device 21fa
    Kernel driver in use: sdhci-pci
    03:00.0 Network controller: Realtek Semiconductor Co., Ltd. RTL8188CE 802.11b/g/n WiFi Adapter (rev 01)
    Subsystem: Realtek Semiconductor Co., Ltd. Device 8195
    Kernel driver in use: rtl8192ce
    lsmod | grep sd
    sd_mod 29560 4
    scsi_mod 133434 2 libata,sd_mod
    sdhci_pci 10834 0
    sdhci 23695 1 sdhci_pci
    mmc_core 82791 2 sdhci,sdhci_pci
    Nothing new happens if I type dmesg | tail after inserting a card.
    I didn't find any solution after searching on Google, but it seems there are a few other people experiencing the same problem as me. I haven't actively tried anything yet.
    I don't have much experience when it gets to this kind of things, so I hope there are some of you who can help me.
    Thank you!
    Last edited by Fayden (2012-12-22 05:13:09)

    In case someone else has the same problem, there's actually a package in the AUR that fixes the problem : https://aur.archlinux.org/packages/ricoh-e823-fix/
    Install it and enables it with systemd and it should work correctly!

  • Iphone 4s ,version 7.0.4 not detecting wifi

    my iphone 4s is not detecting wifi network and i tried by reseting the network settings....but  it doesn't work...
    please suggest me any other option...

    Erase all contents and settings does not reinstall iOS.
    If whatever the problem is applies to every wi-fi network the iPhone has access to, if no change after restoring the iPhone with iTunes as a new iPhone or not from the backup, the iPhone has a hardware problem.

  • Windows 7 does not detect network hardware

    Using Boot Camp, I installed Windows 7.
    After restarting the computer it does not detect network hardware.
    So I cannot connect to my Wifi.
    What should I do?

    Did you download and install the Windows Support software? It was the first menu item when you ran Bootcamp Assistant. If not, run Bootcamp Assistant again and select the menu item to download the Windows Support software. Read the Bootcamp Installation Guide. http://www.apple.com/support/bootcamp/

  • Time Machine does not back up anymore

    Hello,
    My Time Machine keeps on 'calculating' and does not back up anymore. It seems that the Time Capsule is full, but until recent it always deleted the oldest backups automatically (with a message).
    Maybe a Time Machine Buddy report helps:
    +Starting standard backup+
    +Attempting to mount network destination using URL: afp://Marko%[email protected]/TC+
    +Mounted network destination using URL: afp://Marko%[email protected]/TC+
    +QUICKCHECK ONLY; FILESYSTEM CLEAN+
    +Disk image /Volumes/TC/MBP_002332c8a134.sparsebundle mounted at: /Volumes/Backup of MBP+
    +Backing up to: /Volumes/Backup of MBP/Backups.backupdb+
    +Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
    +Event store UUIDs don't match for volume: Macintosh HD+
    +Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
    +Exception writing exclusions cache. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
    +Unable to create exclusions cache data.+
    +Failed to write exclusions cache. Continuing anyway.+
    +Error writing to backup log. NSFileHandleOperationException:* -[NSConcreteFileHandle writeData:]: No space left on device+
    +Waiting for index to be ready (101)+
    +Waiting for index to be ready (101)+
    Any help is greatly appreciated!
    Thanks!

    Do you have other data on the Time Capsule, besides backups?
    It looks like the TC is so full that Time Machine can't get started far enough to delete some old backups.
    If there is other data there, copy something elsewhere and delete it, at least temporarily. It doesn't have to be very large; 20 MB or so should be enough.
    If not, try to delete an old backup manually per #12 in Time Machine - Frequently Asked Questions (or use the link in *User Tips* at the top of this forum).
    You might want to connect via Ethernet cable if possible; especially if Time Machine is trying to do a large backup, it will have to delete a lot of old ones. It will be 2-3 times faster than via WIFI.
    |
    Mixing Time Machine backups and other data on a Time Capsule can be a problem. Once you get this sorted out, see #Q3 in Using Time Machine with a Time Capsule (or use the link in *User Tips* at the top of the +Time Capsule+ forum).
    Message was edited by: Pondini

  • Spotify Connect - Does not detect Denon Ceol N9

    Hi, I have installed the spotify app (using premium) on my HTC one m8 (Android 5). While I am able to detect and play music to my wondows 7 laptop, it does not list my Denon Ceol N9 network player, and I am unable to stream music to my stereo using spotify connect. I have followed the (very short) instructions listed here: http://manuals.denon.com/RCDN9/EU/EN/ZHOBSYxvrwcwjl.php on how to use Spotify Connect on my Denon, but unsuccessfully so far. The units are all connected to the same wifi, but the Denon Ceol N9 is not lised in the spotify app. Any tips on what I am doing wrong? Some settings I need to enable to make this work? Help would be much appreciated :)  - Petter

    My Spotify connect (new versions) does not detect my Denon Ceol Piccolo, My Coel Piccolo is connected to internet wifi or even ethernet cable but non of them results of my Spotify (in other device as iphone or desktop computer) detects My Denon Ceol Piccolo. I also tested to unplug but nothing changes, understand there is problem with connect?, I remember a couple of months ago I could connect as it was detected by iphone (never by my desktop computer

  • Mac does not identify projector anymore.

    Until recently, I used my Mac as a DVD-player and connected it to a projector to watch my movies. Suddenly my Mac can identify it anymore. The projector itself still works fine. I've tried to change the HDMI cable but that didn't make any difference. I have not yet bought a new mini VGA to HDMI adapter to see if that is the poblem, but I somehow doubt that that would be it.
    Whenever I plug in the cable into my mac, the computer seems to react to it but it never goes any further than that. Any tips would be greatly appreciated!
    /Jesper

    I've come across the same problem recently. My MBP Mid-2010 OS: 10.6.8. does not recognize projectors for .ppt presentation through RGB adaptor neither my tv through the HDMI adaptor. These adaptors worked for more than a year without any problems... up to now.
    Although there is a fraction of seconds when I see my desktop projected on the linked device, it disapeared and there are no clues suggesting a device is connecting to the MBP (or the opposite). It's like both devices does not detect each other at all...
    I'll really need this fix for work and home entertainement purposes.
    Please help.

Maybe you are looking for

  • One doubt in VL03N transaction/

    Hi All,           I have one doubt in VL03N transaction.I am an ABAPer.I don't iknow much about the SD process.My SD consultant has changed the Ship-To-Party addressin customer master but it is not reflecting in the document in VL03N.But when I see i

  • HTML page with FLASH object doesn't reload upon a redirect

    Am using:  ECC 6.0 and ABAP SAPGUI development Hi All, I'm seeing a frustrating issue that i'm hoping others have seen and resolved. Here is what i'm attempting and below that is the issue: 1)  I have created a ABAP program in which i'm using the HTM

  • Received upgrade and screen doesn't work

    so i upgraded (finally) to an alias 2, the refurbished one, and powered it up and 40 minutes later the screen  went grey. front screen is fine but main screen is intermittent. can i take it to the verizon store and get another or do i have to ship it

  • Change display Date format from 06.2011 to june 2011 in output of Query

    Hi All,             Change display Date format from 06.2011 to june 2011 in output of Query  Execution. i used time charcteristics 0calmonth in query, output display is coming 06.2011, i want to display output in june 2011 format, anyone tell me how

  • Password should not expire

    Hi, I have profile. its having PASSWORD_LIFE_TIME 90 days, same profile is assigned to all other users. I want to change the password life time unlimited for only one user. Please advise me. Thanks... Bakser