X60 doesn't power on, no lights, no beeps

My x60 doesnt charge (excpet for a little while <1min), and it doesnt turn on.
The battary is really not on good condition (might not be in working order), but would that prevent me from working on the AC only?

Have you tried a different power supply?

Similar Messages

  • How do I connect my 2nd generation Ipod to a Firewire 800 port? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered...

    How do I connect my 2nd generation Ipod to a Firewire 800 port on a new laptop? It no longer holds a charge and it doesn't power up with the newer generation USB cable. The only way I can sync my Itunes library onto this Ipod is when it is powered and connected simultaneously. Pls help.

    Try here:
    iOS: Not responding or does not turn on
    If not successful then time for an appointment at the Genius Bar of an Apple store.

  • HP Photosmart 7510 doesn't power on

    Hello,
    I have a hp photo smart 7510 that I bought from your store on Dec 11 2011.
    It has been working alright until suddenly it doesn't power on. I have checked the cable and I can see power coming through it.
    Couple of questions:
    Here's my order number: [Personal Information Removed]
    1. Is the product still on warranty ?
    2. How do I get this fixed ?
    I have seen others posting similar issues but the solution isn't known.

    Hello,
    Please click HERE to access the steps that should resolve the issue .
    If issue still exists, contact HP Tech Support for further assistance.
    Regards,
    Jabzi
    Give Kudos to say "thanks" by clicking on the "thumps Up icon" .
    Click "Accept as Solution" if it solved your problem, so others can find it.
    Although I am an HP employee, I am speaking for myself and not for HP.

  • My HP Pavilion dv9700 will not power up. Lights blink on and off on a cycle, but screen is black

    My HP Pavilion dv9700 will not power up.  Lights blink on and off on a cycle, but screen is black.

    Please post your Full Product Number
    http://h10025.www1.hp.com/ewfrf/wc/findModel?lc=en&dlc=en&cc=us

  • My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    My AppleTV stopped working after power outage. Light is on and I rebooted and reset w remote but it keeps giving me a pic of the Hdmi cord like it is not recognizing the hdmi as being plugged in. I've unplugged it several times.

    It is in recovery mode. The picture is telling you to connect to iTunes via micro usb cable in order to restore.
    http://support.apple.com/kb/HT4367?viewlocale=en_US&locale=en_US

  • 2012 MacBook pro will not power up sleep light on then off

    Please help my mid 2012 MacBook pro will not turn on. When I press the power button the light on front comes on and the cd rom drive attempts to start then it shuts back off. I have tried holding down the power button and pressing the button combo to reset the controller.  Thanks for any help.

    You may have to take the MBP to the Apple store as soon as possible.
    Best.

  • Hello, My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  Please advise!

    Hello,
    My white McBook (2008 or 2009) recently stopped turning on.  When I hook up the Magsafe power adapter, the light shows green, but the computer will not turn on, or make a sound.  I've tried the re-boot option, but nothing works.  I first thought I needed a new battery because the lights at the back are all off, but shouldn't the computer turn on once the power adapter is hooked up and the light on the Magsafe adapter shows green?  I'm a computer doofus, so please be kind.  Please advise!  Thanks in advance.
    SS

    Take it in for service.

  • Power and resume lights blinking on HP 6940. Unable to print.

    Hello,
    The power and resume lights are blinking simultaneously on my HP 6940 inkjet printer, which prevents it to function properly. There was a paper jam, which I cleared, and I don't see any piece of paper remaining in the printer. I also went through all the steps outlined in the troubleshooting section, but it didn't solve the problem.
    Thank you for your help.

    Any clues ?
    Thanks

  • Exchanged logic board to a new one, it doesn't turn on, no light no noise, it's dead

    exchanged logic board to a new one, it doesn't turn on, no light no noise, it's dead

    Who put the new logic board in?

  • WRT54G V8 power and LAN light wont come on

    Ive recently tried to update the firmware and everything went as instructed, then the power and LAN light went out.
    Now I have the indicator lights for the computer and modem, but thats is. No internet or SSID broadcast. I cannot log into or ping the unit, and have tried the hard reset many times, with no effect.
    Any ideas would be appreciated, thanks
    Solved!
    Go to Solution.

    Did you Interrupt the Firmware Upgrade ? Did you Upgrade the Firmware Wirelessly/Wired ? Atmost you can again retry the hard reset, try to give a static ip address on your computer(Click on the Start button >>> Settings >>> Control Panel >>>Network Connections- Right click on the icon for Local area connection and go to properties- On the 'General' tab select 'Internet Protocol TCP/IP' and click on the Properties button- Select 'Use the following IP address'- Provide IP Address - 192.168.1.5 Subnet Mask - 255.255.255.0 Default Gateway - 192.168.1.1- Preferred DNS 192.168.1.1 Alternate DNS - 4.2.2.2 >>Click on Ok button to Save and Click on "Close" on main Properties window. )
    Now click start >> All Programs >> Accessories >> Command Prompt and type in ping 192.168.1.1 , if you get 4 replies you can retry the firmware upgrade...

  • TS2771 My iPod 4th generation doesn't Power Off.  Any idea how to force it to shut Off?

    My iPod 4th generation doesn't Power Off.  Any idea how to force it to shut Off?

    Try a system reset.  It cures many ills and it's quick, easy and harmless...
    Hold down the on/off switch and the Home button simultaneously until the screen blacks out or you see the Apple logo.  Ignore the "Slide to power off" text if it appears.  You will not lose any apps, data, music, movies, settings, etc.

  • When I first plug in my power cord it lights up green and then after a few seconds changes to red.  What does this mean and how do I fix it?

    When I first plug in my power cord it lights up green and then after a few seconds changes to red.  What does this mean and how do I fix it?

    Apple systems in MBP have self-maintaining charging systems.  If the battery is less than 95%, the charger light turns orange when plugged it.  It will charge to 100% and stay green then will hold on charging until the battery drops to 95% again.

  • Officejet pro 8000 and the power and resume lights keep flashing

    I have an officejet pro 8000 and the power and resume lights keep flashing. I initially had the problem when I put a new black ink cartridge in. Lately there was an error message on the computer saying pump stall error, which then culminated in a print head error. I have replaced the print head at an extra £40 I have replaced all the ink cartridges which say they are low even though I haven't been printing. Basically spent the cost of the printer again  AND I STILL CANT PRINT! I'm using a Mac with snow leopard and I have reset the printer list and installed the new software and drivers. I have tried connecting with USB and Ethernet. I have filled up the paper. I have taken out the duplex and given it all a blow through. reset the print heads - basically everything the support web pages told me to do.
    I have to say this is the worse printer I have ever had from HP. I always buy HP because of the quality. I have to say I feel unless this problem is solved with out me spending more money on it I will have to buy something else - and not HP ever! oh and the warranty is out by less than 2 months!

    Welcome back burtf,
    I am sorry to hear about the issue you are having with your Officejet 8500 showing a message for you to turn the printer off and on. I would recommend following the guide below for this issue.
    I hope it helps!
    'Turn Power Off then On' Message Displays on the Control Panel
    If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions: click here.
    Happy Thursday
    R a i n b o w 7000I work on behalf of HP
    Click the “Kudos Thumbs Up" at the bottom of this post to say
    “Thanks” for helping!
    Click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution!

  • Satellite P200-136 doesn't Power On

    Hi there,
    I have a P200 that doesn't power on any more! It's about 3 years old.
    Battery LED (yellow) and "DC IN LED" (blue) are on.
    Nothing happens, when I press the power on button. I tried to push it harder, repeatetly, smoothly and so on...but nothing...
    If I press the "Internet" or "CD/DVD" Button (directly near the power button), the notebook powers on for about 3-4 sec., fan is active, then it powers off.
    Display doesn't power on, no backlight etc.
    What I already tried:
    - removed the battery
    - tested another power supply (with and without battery inserted)
    - removed harddisk and RAM
    Anyone an idea, why it doesn't power on while pressing the power button?
    Mainboard defect?
    thanks and bye,
    Heiko

    Hi Heiko,
    This sounds really strange and I think its a hardware problem that cant be solved easily. My suggestion is that you contact an authorized service provider in your country. The technicians can check your notebook and repair it for you.
    Here is a list of all ASPs:
    http://eu.computers.toshiba-europe.com > Support & Downloads > Find an authorized service provider
    Good luck!

  • TS1367 Hallo,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable

    Hallo ,I have an IMAC 21.5. which does not start.When i press the power button i hear only beep with an interval of 4-5 seconds.Some times when i take off the RAMS and put them again then get a white screen and shows that i have to insert a bootable device.Then i bought OSX mountainlion on line and wrote it on a DVD and tried with a USB key board to start the DVD.But does not work.Please help me to get this imac work.
    Thankyou in advance  for your help.
    Terrence

    Hey terremo,
    Thanks for the question. From the information you provided, it sounds like the iMac is successfully turning on, however video is not displayed. These symptoms can usually be isolated further by the troubleshooting steps in this article:
    Apple computers: Troubleshooting issues with video on internal or external displays
    http://support.apple.com/kb/HT1573
    Thanks,
    Matt M.

Maybe you are looking for