X60: mechanical display panel open lock clip is little bit defective - I need tips ...

Hi all.
This is my first post. My name is Ciro and I live in Italy. I've purchased a beautiful used Thinkpad X60 in a local flea market and I am really thrilled about this tablet/pad/laptop. Now I would like to restore some small things. The fisrt one is the display panel open/lock clip ... look my video:
http://youtu.be/WZwAOABwNmc
What can I do to improve or solve this problem? ...or where can I find a spare part ?
Thanks a lot
Ciro
Solved!
Go to Solution.

You bet,
Here's your Hardware Maintenance Manual . Page 92 shows it. You only have to take off the bezel to change it out.
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Satellite L850 starts automatically opening display panel

Hi everyone!
I have a problem with Toshiba System Settings program.
I have to start with a short explanation:
I have polish version of Win 8.1, upgraded from win 8.
I can't find the option that could make my Satellite L850 to don't turn on automatically after I raise it's cover.
It's really annoying.
In the control panel (I suppose that's how it's called in english versions of windows) in the power management section there isn't such option.
There's only "choose the result of closing the cover" and i have there "shut the computer".
I have also the fast starting system option enabled.
In the BIOS "Panel Open - Power On" is DISABLED.
I remeber that there similliar option in Toshiba System Settings and before returning the system I solved this problem in that way. But there's a problem with access to Toshiba System Setting.
When I try to run it, I receive the notification "Prba sprawdzenia has?a administratora zako?czy?a si? niepowodzeniem", what means "The try to check the administrator password ends with failure" and there's only OK button.
Does anybody know how to fix the Toshiba System Settings? Reinstallation doesn't work.
Thank You for any idea and I'm sorry for my bad english. I'm not sure also if I wrote it in the right place. Didn't know which forum should I choose: Toshiba Tools & Utilities, like it's a problem with the System Settings or the forum associated to my notebook's model.

I guess you are talking about the Panel Open - Power On" feature
https://aps2.toshiba-tro.de/kb0/FAQ1A037V0000R01.htm
You said that you upgraded the system from Win8 to Win 8.1.
Well, after such system upgrade its necessary to upgrade the Toshiba tools and utilities to Win 8.1 version too because the Win 8 software isnt fully compatible with the Win 8.1 system.
I guess the Toshiba software was not updated and this is the reason why the Toshiba System Settings program does not work properly.

How to keep a "front panel" open during another sequence?

Hello everybody,
I'm new on the TestStand forum and I have a question for my project.
I need to make a test sequence with several sub-steps: Barcode reading, Data reading, Data analysis etc... and all these steps in a "For" or "Do... while" loop under TestStand.
Before doing the loop, I want to create a "global HMI" step using labview, with on the front panel, the status of each sub-steps. I need to update the status of each sub-step after their execution.
The sequence TS is:
Step Action Labview: HMI.vi (display front panel when calling vi)
Loop for
Barcode reading
Data reading
Data analysis...
That's why I need to keep the front panel of "HMI.vi" always open to updated /display the status of each sub-step. (something like colors of a LED). I doner 't want to call the HMI.vi after each sub-step.
I understood it's a multi-threading process and the reference of HMI.vi should always be active during all the "for loop", but I don't how to keepthe reference.
Could you please kindly show me how to do it under TestStand (verstion 4.1) with LV (7.1).
Many thanks in advance,

Hi zuzu,
A UIMessage is typically used as a method to alert and pass information from your sequence or code modules to the User Interface.
For a good discussion on this, refer to the section titled "Communication from the Test to the User Interface" here:
Developer Zone Tutorial: Best Practices for NI TestStand User Interface Development
However, you can register a callback to listen for these UIMessages in other parts of your code besides the UI as well. That's what we are doing in this case with the floating panel.
So basically, in your "Update HMI" step, you would post a UIMessage using RunState.Thread.PostUIMessage.
This posts the UIMessage, and you can pass whatever value you want from the "Update HMI" step to the HMI.vi.
For information on the function call, refer to:
NI TestStand Help: Thread.PostUIMessage
In this case, we are sending a UIMessage with message code 10200, along with 2 pieces of data, Locals.Progress (a numeric) and "TestProcedure" (a string).
Typically, you can pass a Number, a String, a Boolean and a Variant with each UI Message. If you need to send multiple pieces of data of the same type (your second question), then you should bundle them together into an array or cluster (container) and pass it via the ActiveX parameter.
See the following forum posts for more details:
reference a numeric array in PostUIMessageEX
HOW To pass more than one numeric data with ActiveX postUIMessage
Jervin Justin
NI TestStand Product Manager

24" LCD cinema display panel weight

does the spec weight of 21 lbs. ( http://support.apple.com/kb/SP502 ) for the 24" apple cinema display include the stand? If so, what is the weight of the panel without the stand? I'm looking at monitor arms and most say that the max weight is 20 lbs..
Also, does anyone know the weight of the VESA mount plate for the cinema display?
http://store.apple.com/us/product/MD179ZM/A/vesa-mount-adapter-kit-for-imac-andl ed-cinemaor-applethunderbolt-display?fnode=53#overview
Thanks!

Perhaps all it needed was a restart. I first tried clamshell mode and there was no flicker. Then I tried with the lower graphics and no flicker. Now I've restarted with higher graphics turned back on and it hasn't flickered yet. I've re-opened all the programs I had open at the time as well.
I've marked this issue as resolved but if it recurs I'll be sure to post here.

Retina display wakes in high resolution / breaks Displays panel

Hi all,
Yesterday I used my new retina MBP with an Apple TV, mirroring its screen up on the AppleTV for a presentation. Since then, whenever I wake the MBP (I have its Energy Saver settings set to sleep the display but not the computer after a time), it wakes in super high res with tiny tiny tiny text (this may be 2880 x 1800 but I can't tell, but it's higher res than the highest setting the Display panel offers you).
Then, because I want to reset it to something readable, I open the Displays panel, and click Best for Retina or such, and it doesn't change. None of the resolution settings do anything. The Display panel is not entirely broken, because the GUI functions, as in, highlighting different options I choose, but there's no reaction.
To fix it, I've found I can go into the menu bar icon (rectangle with triangle under it, the AirPlay icon), set the MBP to Airplay mirror to itself (which strikes me as an odd option to have available). This changes the screen to something pretty low res with letterboxing at top and bottom, and asks me for a Airplay password for my own system. I say Cancel, and then my Displays panel works again, and I can select Best for Retina.
Any tips? Seems like a bug.
sg

Maybe http://helpx.adobe.com/acrobat/kb/hi-dpi-retina-display-support.html ?

Pages panel opens whenever I open a PDF

Acrobat Version 8 Pro.
This seems to have started a few weeks ago.
Whenever I open a PDF, the Pages Panel opens and takes up 1/2 the page. (I do not want to see the Pages Panel until I need/select it).
I have verified that the File_Document Properties popup is set to "Page Only" under the Navigation Tab.
Other than that, I can't seem to find any setting anywhere that allows me to set the Pages Panel to stay closed when opening a document.
Any ideas?

Most likely you inadvertently set the pages display in your preferences. You find that under Edit>Preferences>Display or similar location. That setting is used unless the document properties are set differently.

ADF Swing - what happened to 'Display panel.java'

When editing a for with embedded panels, in Jdev 10, when you right-click on the panel there is an option 'Display panel.java', that opens embedded panel for edit. I don't see this option in 11gTP3

Sorry, wrong forum, this was supposed to be on 11g forum.

Keeping at Least One Accordion Panel Open with Variable Heights

Hi -
Is there a way to keep at least one panel open when using {
useFixedPanelHeights: false }?
Here's an example:
http://labs.adobe.com/technologies/spry/samples/accordion/AccordionSample.html#VariablePan elHeights
If panel 4 is open, and you click the panel 4 heading, it
closes and no
panel is open.
Thanks,
Rod

Sorry, I didn't read my full message regarding wanting only
one panel to open.
What I ended up doing was using a PHP conditional to display
a message if a certain variable was not passed in the URL. See my
post on the Friends of Ed forum. Scroll to the bottom for my
solution.
http://friendsofed.infopop.net/4/OpenTopic?a=tpc&s=989094322&f=5283032876&m=3461018571

Font Display Panel Problems

I was reading an online article about using iWeb
http://www.mymac.com/showarticle.php?id=3047
and there is a screen shot of the font display panel
This is the panel many applications use to allow the user to adjust the fonts. If you open TextEdit and go to Format/Font/Show Font the Font Panel will appear.
As you can see in the iWeb article the screen shot shows recently used fonts. The fonts show how they actually appear or they are preview. When I bring up iWeb o TextEdit I don't see that preview. If I select the Gear icon in the lower left corner I can turn on Show Preview but this just brings up a header show what a selected font looks like. The fonts in the list don't change.
There seems to be a problem with my Recently Used and Favorite lists. There are a few fonts in my list but they are not grouped together. There are blank rows listed between the shown fonts. However if I click in the blank area a font is selected and if you have any text selected in the document it will change that text.
If I choose a new font for a TextEdit document that font never shows up in the Recently Used list.
Is there a preference file for this panel? It appears my font display panel is not working correctly.
Are others having these issues?
Thanks
Kelvin
Message was edited by: KRitchie

I have an iBook running 10.4.11 and the recently used collections gets updated correctly. However when adding a font to the the Favorites collection there are blank rows between the fonts I've added. Also if you select the font type and not the specific font such as the bold, or regular it doesn't copy all of them.
Also, unlike in Leopard when you select the Recently Used collection you see what the font looks like show in the list irrespective if the preview panel is activated. Looks like for Leopard the font display panel was changed or not tested thoroughly.
Kelvin
Message was edited by: KRitchie

Xperia Z1 Compact - JDI and AUO Display Panels used

Xperia Z1 Compact using JDI and AUO display Panels differently confirmed - Display Lottery is spotted again :/
Let’s have a look at Xperia Z1 Compact display panels.
Xperia Z1 Compact using AUO Display panel
Image Link - http://cdn1.xperiaguide.com/wp-content/uploads/2014/02/Xperia-Z1-Compact-using-AUO-Display-panel.jpg
Xperia Z1 Compact using JDI Display panel
Image Link - http://cdn.xperiaguide.com/wp-content/uploads/2014/02/Xperia-Z1-Compact-using-JDI-Display-panel.jpg
How to Identify which panel your Xperia Z1 Compact using ?
You may need root to find that out but if your Xperia Z1 Compact is not rooted then use a file manager like “Solid Explorer”. Open it and then navigate to #_ System Root > sys > devices > mdss_dsi_panel > panel_id and Check what is mentioned there.
Sony has used different panels for Xperia Z1, Xperia Z1 F and now for Xperia Z1 Compact, well it seems display lottery will affect future flagship devices also.
Source - http://www.xperiaguide.com/2014/02/19/xperia-z1-compact-using-jdi-auo-display-panels-differently/
Don't forget to give Kudos.

Castanje wrote:
Isn't this illegal?
What laws exactly do you think are being broken?
Every phone manufacturer does this, even Apple. They use different factories and companies across a production run (e.g. JDI, Sharp and LG for iPhone 5) and the panels will have slightly different characteristics despite being of the same type. Apple chooses to callibrate each panel in the factory, however, which not many others do. Customers should demand this, though, and just return their phones if they're not happy with their panels.

Blank display panel problem

I have an application which collects data from several sources, displays the data on multiple panels, and writes the data to disk. This program also uses the CIVIC Web Server. The program has run correctly for days and even weeks. Eventually the display panels all go blank. The panels are still there but contain only white space. The collection and writing of data to disk, however, continues. When the program is stopped (from the task bar or task manager) and restarted, it performs normally again.
Has anyone else seen this kind of behavior? I suspect that it might have something to do with the web server, but I have another very similar program running on a different PC also using the web server. This program does not have the blank screen problem.
Thanjs for any light you can shed on this.
Bruce Andrews

Hello Judy -
I recently saw this in a CVI program I had written, and in my case, the cause was a memory leak in my program. If you open task manager when you see this white screen, how much memory is the CVI application using??
I would also make sure you've enabled extended debugging on your development machine in debug mode, which should show you any memory leaks you may have. Just enable extended debugging through the Options»Build Options dialog, and then run your program under the debugger. You should allow the program to exit normally. If the Resource Tracking window then displays, it is an indication of resources that need to be cleaned up. For more information, refer to this document.
NickB
National Instruments

Voice over does not allow me to open locked screen

voice over does not allow me to open locked screen iPhone 6
<Subject Edited by Host>

Use two taps wherever you would use one tap. Navigate to Settings/General/Accessibility and turn it off.

Reports to display vendor open items by payment methods

Hi Gurus,
Is there any reports to display vendor open items by payment methods?
Thanks i

Hi,
Use FBl1N or F.41
Goto Dynamic selections, Select payment method give that and execute. It will give you the report payment methd wise.
Regards,
Radhika.

Spry collapsible panel open by default

Hi there,
I've done a couple of sites where the left nav bar is a
series of
collapsible panels, each one housing links to products within
a specific
line. Would it be possible to insert code somewhere to get
one of the panels
open by default when you open a certain page, ie if you open
the 'suncare'
page the 'suncare' panel is open on load. I read something
about this on the
Adobe documentation but when I tried it it did't work.
It needs to be code somewhere on the page that interacts with
the spry
panel, I can't put it on the panel itself as I'm using a SSI
to insert the
nav bar into dozens of pages.
Many thanks...

Check out the examples on this page: http://www.spry-it.com/examples/spry-widget-cookie-history/#collapsiblepanel

Is there a way to open original clip from timeline

I hope I can explain what I mean. WHen I control clip on a clip in my timeline it opens a window with a list of choices:
Open "Bobby's House"
Open in Editor
Reveal in Finder
etc
When I use the first option, it opens the clip in my viewer, but it's the clip with the selected inpoints and outpoints that are in the timeline. I would like to open the original clip, without the inpoints and outpoints (because when I change inpoints and outpoints it changes the clip in the timeline as well, which is not what I want.) For example, I want to go back to get some more sound from "Bobby's House", but to do so I have to search through my thousands of clips in my Browser. I have my clips fairly well organized, but it would save me so much time if I didn't always have to go back to the browser.
There is a non active choice in the window called "open copy in editor". Is this what I'm looking for, and if so, how do I activate it?
Thanks

With your playhead over the clip in the timeline and that V track's 'track selector' as the only one active...hit the 'f' key.
This will load the original clip into the viewer at the matching point of the frame in the timeline.
K

X60: mechanical display panel open lock clip is little bit defective - I need tips ...

Similar Messages

Maybe you are looking for