X60 Security chip hang up

I have an X60 that hangs at the "checking security chip" advisory that comes up during a boot up -either a cold or restart boot up. If I go in to the BIOS and disable the security chip.. After about 30 seconds of seeing the "Checking the security chip" banner- I will get a notice something to the effect that the chip is disabled or a problem with the security chip driver.. but instead of hanging up forever, I can at least acknowledge the warning and get my X60 to boot. Anyone have an idea what is going on ? and a fix?
TIA
RIch

How are you logging into the system? Are you using the Fingerprint to login or the password in Client Security Solution (CSS)? Remember that Client Security Solution controls your settings for the Password Manager (Security settings for Fingerprint reader data are controlled by CSS also)
You can go to Start -> All Programs -> ThinkVantage (or Lenovo Care) -> Client Security Solution
If you have CSS version 8, you should see a Menu Bar at the top.. You can click on Advanced , then Reset - this will allow you to clear all password data from the Password Manager.
In addition to the "Reset" option, you also have the ability to "Manage" your settings. Use this to make changes to way you log into Windows at boot. You should have 5 options listed under "Manage". This also allows you to decide whether or not to use the Fingerprint when signing on.
If you are trying to clear you fingerprint data, that can be done from BIOS
F1 -> Security -> Fingerprint -> Erase Internal Fingerprint Data -> "Yes" to confirm.
You should also take the time to read this Guide on Fingerprint Reader Tips below:
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-59650
Also read over "Client Security Solution 8.0- Considerations"
http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-66965
I hope this will provide some help.
Regards,
Mark
Do NOT PM me with technical issues. Post in the forum for assistance. Thanks

Similar Messages

T60 won't boot, hangs on "Checking the status of the embedded security chip..."

My T60 with embedded security chip and finger print reader, running Windows XP, has just recently developed this problem. It never finishes booting. I've changed the BIOS setting to completely disable the security chip, yet this condition still persists. Occurs running on battery power or cord; occurs when in a docking station or not. Occurs when in diagnotics boot mode or quick boot mode.
I've searched the Lenovo support site and this forum for similar symptoms and help, but couldn't seem to find any.
Anyone know how to get around this problem?

My thrive 10.1 has the same problem and hung in leading innovation screen. Do you find a way to solve this issue yet? If you know please help me to crack this problem. I did the factory hard reset, but it didn't work. I appreciate a lot if you or any one have any solution to solve it.
Thanks.

Security Chip Incompatible with XP SP3 !

Also see my post about security chip lockup on boot with XP SP3...
Just talked to Lenovo support about my problem. They told me that my T60 security chip was incompatible with XP SP3 and the fix was to not load SP3. Hard to believe that is their "solution" !!!
In any even, BEWARE ! Be sure to set a back up / restore point before installing XP SP3. You will likely need it.
If anyone has a solution, I sure would like to know about it. Per the previous post, Inactivating or disabling the security chip from bios will not prevent the hang. Only restoring the system to pre-SP3 will let the machine boot.
Thanks,
Woody

I have a Treo 680 and I spent about an hour on the phone at my computer with tech support from Palm trying to resolve this and when it
was all said and done I still can not get my calendar and contacts to sync. Tech support told me that I have a corrupted database and that
there is problems with the SP3 and the hot sync manager. They told me they were working on it but couldn't give a timeframe for when
it would be fixed. I can not remove SP3 from my computer. I have enough issues already with security without adding to it. Palm needs
to fix this problem right away.
Post relates to: Treo 680 (AT&T)

T60 unresponsive security chip

Hello all,
I've found myself in a bit of a predicament that I'm hoping somebody else has experienced or can otherwise help me with and I would greatly appreciate any help or advice offered. Yesterday afternoon I did some routine windows updates (XP) and upon rebooting my computer just hangs at "checking the status of the embedded security chip". I have yet to find any way to get it to continue beyond this point. I have tried disabling all of the various passwords and options in BIOS as well as clearing the security chip and disabling it. At this point I have a predesktop password that the system will accept and it will allow me to enter the thinkvantage recovery area though sporadically it asks me for a password to get in and I have to remove the battery and hold the power button before replacing the battery and booting in order to get it to reset. The only thing I can think of is that the security chip has just gone completely haywire and I can't quite figure out where to go from here. Thankfully, all of my important documents and files are backed up separately so there is no concern there. That being said anybody have any ideas? I'm at my wits end so any advice is welcome.
I think I've described everything I can remember but feel free to ask questions and we'll see if there is anything I left out.
System:
T60 with Windows XP
(ask for further information that may be helpful)

Hi SpaceNerd12,
Check the solution here:- http://forum.thinkpads.com/viewtopic.php?p=171471#p171471
Hope it helps.
Maliha (I don't work for lenovo)
ThinkPads:- T400[Win 7], T60[Win 7], IBM 240[Win XP]
IdeaPad: U350
Apple:- Macbook Air [Snow Leopard]
Did someone help you today? Compliment them with a Kudos!
Was your question answered today? Mark it as an Accepted Solution!
Lenovo Deutsche Community Lenovo Comunidad en Español
Visit my YouTube Channel

T61 will not activate Security Chip to run Password Manager

I have a T61 running XP SP3. My PC is just out of warrenty so I can't contact them about support. I recently had a problem with my battery and it basically took down my intire computer and it wouldn't boot. So I have a slightly newer T61 in my office I put my hard drive into it and booted to use until I could get mine back to working. All was well till I switched back to my original PC and it started saying that my Security Chip needed to be activated in order to you the security features on the PC. When I clicked to activated it it said it needed to reboot....so after reboot, it came back up again. I have tried this many many times and can't get it to activate. I have tried making the chip all 3 possible states (Active, Inactive and Disabled) and nothing seems to work. I also tried clearing the chip per some instructions I found on forums. This didn't work. The last thing I tried was to restore to factory install using the Lenovo factory restore. This all went well, but as soon as everything got installed I started getting the Active Security Chip message after boot.
I don't really care about anything the chip does except the Password management feature. I have never used the other features mentoned about locking bios and the harddrive. Today I tried telling the Message to not display the message again. It doesn't come up now when I reboot, but neither does the PW manager. Also I can't get the message or security center to come back up when I launch it from the Lenovo Panel.
I have seen several posts simillar to this, but they all recommended things I have tried, or didn't have responses.
I am game to try almost anything at this point????
Any help at all will be much appreaciated
Thanks in advanced

Hi Ray,
Welcome to the Lenovo forum
I would hazard a guess that Client Security Solution was installed while your security chip was active, and is expecting to use it. And since it appears that your system is having some problem with its security chip, Client Secuity Solution doesn't work right.
Client Security Solution (CSS) does not require the security chip in order to operate. It's been awhile since I used it, but if you start the CSS main interface, I think there is a configuration option to tell it to use the security chip or not. If you can find that configuration option, try telling CSS to NOT use the security chip, and then reboot, press F1, and disable the security chip in BIOS setup.
If the above doesn't fix your problem (or if I'm mis-remembering about being able to change the CSS security chip option after it's installed), you could try removing CSS and then re-installing CSS after you've disabled the security chip in BIOS setup.
There may be a better / easier solution... you might want to wait a bit to see if someone with more CSS experience has better ideas.
Good luck!
-Frank
Results of Your Ideal Business-Class Laptop survey, concluded 2009-07-29.
Did someone help you?
Say thanks! with a kudo.
Even better: Pay it forward, help someone else.

What we can do with the Security Chip ?

After installed CSS, activated the security chip, what is it going to do? passwords / fingers are doing their own jobs indepandently. So, after activated the chip, what we can do with it?

Some reading materials on TPM.
http://www.pc.ibm.com/us/pdf/CSS_data_sheet.pdf
Another one ...
http://www.pc.ibm.com/us/security/
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

T43 Need to activate Security Chip after every boot

Hi!
I have a TP T43 - model 2668 K6G. My problem is that I have to activate the Security Chip in the Client Security application (8.20.0023.00). Thus I have to boot and then reboot to get up and running. I use the Password Manager so I need the Security Chip to be activated.
Hope to get help soon :-)
Best regards
/Erik

Security chip is "married" to the board it came with in the first place, and hence not replaceable.
You can safely junk that planar.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

What to do with the message: Activating embedded security chip

Hello,
I've been using a dc7800 for a couple of months without problems, running Windows 7. As the machine had only 1GB RAM, i added two modules of 1GB each last week. Apparently one of the modules is faulty, as the pc would not boot with both modules inserted.
I swapped the modules a couple of times to find out which one was giving the culprit - i removed power from the pc, changed the modules and powered it on again to see if it would boot ok now.
Now, after a few times the message "Activating embedded security chip" appeared on screen every time i powered on the pc. The message stayed for a couple of seconds, then the pc restarted and the message reappeared and so on.
Pressing F10 during boot resulted in a "301 Keyboard error message" together with the "Activating embedded security chip" message, again with a restart after a few seconds.
In an attempt to solve the problem i reset the cmos by pressing the internal switch for 5 seconds. Since then, after powering up the pc i only see "F1 Accept" and "F2 Cancel" on the screen, but keyboard input is not recognized.
Again, the pc restarts after a few seconds.
I upgraded the Bios to v1.32 some time ago, but i have never touched the TPM settings in the bios.
Any suggestion to solve this annoying problem is much appreciated!
Kind regards,
Ruud

Hello ruudk,
In order for us to accurately help you resolve your issue, I will provide you the link to our commercial forum. Because this PC is a commercial unit they would be able to assist you better, you have actually posted to our consumer forum. When you click on the link it will place you right where you need to be. It is possible that you may have create another profile as well.
Commercial Forum
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

T420 BIOS - "Clear Security Chip" Option missing

Hello,
we got several T420 with different BIOS versions (from 1.30 to 1.40)
On 95% of them the "Clear Security Chip" Option is available @ BIOS
but on some of them the option is missing.
Is there an easy explanation for this mistery?
Best regards,
Chekov33
Solved!
Go to Solution.

The clear security chip option is only in BIOS after a cold boot.
It won't be there after a warm boot.
This is for security reasons.
Mystery solved?

Check virus of external hard drive (in a safe way) and TPM security chip request

Hello.
Context, complain:
I had few trouble with my new lenovo R61. But today everything is alright, downgrade to xp ok, driver graphic card ok, partitioning ok. Westerday I was in the same point with Avast anti virus installed, comodo firewall install. I decide to install spybot and check an external hard drive. I allowed the choice of spybot to do something with some "dangerous files". After this point I was not allowed to do nothing in the computor. "your not allowed to shut down the computer". "your not allowed to...contact admin". "your not allowed"....
I forced the restart, press blue, recovered the system and decide to accept the norton help, so I have norton install.
Request1:
I want to check my external I drive with any risk for the system, what can I do, I'm I in risk as I plug in?
Request2:
Second small problem, when I try to enrolled my finger, it ask me for TPM code that I do not have. Is it safe to go in the bios and clear security chip, I see some warning in the doc.
Thanks
Tom
Solved!
Go to Solution.

Ok thanks!
I've resolve both problem yesterday evening,
My computer is now ready to operate and my hard drive looks clean now (that's what says norton and sophos anti-virus). I hope that is true. That's was quiet stressfull to have a virus attack after 1 day. Somebody suggest me that's maybe I don't restart before using Spybot creating a big mess in the registry.... I'll never now.
But now ALL GOOD YEAH
Tom

T60 Startup stuck on "checking embedded security chip"--cannot start after factory restore

You may have read my post a week ago. Lenovo sent me R&R disks and I have restored machine to factory settings. Added back MS Outlook, Office, etc. Things worked fine, programs, files, internet...then I downloaded some MS files (mainly security patches and SP3). Log out, log back in and here I am stuck at "checking embedded security chip". Reloaded factory settings again, same problem.
Should I reload again and before shutting down, disable client security (I have McAfee suite running and only use firefox now, not explorer)? Can anyone thing of another way to disable the security chip checking process (disabling it or inactvating it in BIOS doesn't work--it still "looks" for it).
Any other ideas?

I need to share with you that Client Security Solution helps turn your computer into a highly protected vault.
I would suggest you to please update the Client Security Solution software and also update the Fingerprint Software of your notebook from the below mentioned web link.
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/tvtcss8x_1311ww.exe
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/thinkvantage_en/fpr_586_6874_32ww.exe
Once you download and install the above mentioned software please restart the notebook and check if the issue resolved.
Regards,
Sameer
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution".! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Disable security chip in bios

Hi
What can be the consequences if I disable the security chip in bios.
My T60 won't pass the startup fas called "Verifying status for the integrated security circuit" (sorry, free translation from Swedish to English). The fingerprint reader shows up for bios and HDD but not the next step.
The cause might be that the last thing I did was installing a new firewall without forwarding any application.
I have, in safe mode, removed the program (with Revo Uninstaller, CCleaner etc). MSconfig has no trace of it but still nothing solve the problem.
Please, can anyone give me some advices how to do?
Best regards // Plaincollar

I can tell you that mine is disabled, as I have no use for it.
As for what difference it makes on your system will depend on exactly how you used it. I'm not anything close to an expert on the security chip, as I've never enabled on on any of my thinkpads, so hopefully another member will post some more useful info.
ps. Your English translation appears very fluent.
ThinkPad W-510 i7-820QM(1.73-3.06GHz) Quad Core... ThinkPad T500, T9900, 8gb SSD...FrankNpad T-60p/61p (X9000 2.8ghz) 8gb SSD ips FlexView...ThinkPad T-61p (T9300 2.5ghz) 8gb ram...Thinkpad X-61 Tablet 4gb ram...ThinkPad A-31 (1.9ghz P4 1.5gb ram)

Security chip problem?

I use Komodo Digital Newt Professional to document our network. I never have been able to connect remotely to inventory Levnovo portables (running Window XP Tablet Edition or Windows XP Professional). But I used to be able to install Newt Professional locally and run the inventory.
I don't know what's changed but now whether I run the inventory locally or remotely I get the following error:
Can't access ADMIN$ share on SJOBERG. (Error 1130: Not enough server storage is available to process this command.)
At first I suspected the security chip, but turned it off with the same result.
This is true for all Lenovo portables in my inventory (33 +/-). I've posted in this section since my subject doesn't seem to fit any forum, but the majority are X200 tablets and laptops (I also have a mix of T41 and T61 series).
Any ideas?

Hello France,
Brilliant stuff I must say.
Thank you.
I wish that I had read that article before I ever even booted my X300 up for the first time - much less gone ahead and backdated to XP from VISTA. I can only imagine that the failure of the TPM to recognize its initial password has something to do with this process.
Not being that terribly well informed, I tend to do things when prompted to by the OS. Not always the best policy as we have seen.
I believe that I shall leave things well enough alone as they are. Live and learn…
However I find it disappointing, to say the least, that no mention of any of the information and potential pitfalls found in the article you pointed me to is made by Lenovo itself.
Cheers!

Security chip on T60

Hello everybody,
My problem on a T60 model 2007, type 77g is that while I have the security hip enabled in BIOS I can not activate that from the IBM Embedded Scurity Subsytem.
As I can not activate that due to an unexplained error I can not remove the IBM Embedded Scurity Subsytem software either. Is this a catastophy or what?
Do have anybody any experience on this particular issue? Prior to this the motherboard has been changed and ithink that the problem might be there.
Thank you for any input.
Julian Rosengren

This can be done starting with T400/T500 series, in fact any BIOS setting can be changed from within Windows, see here:
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=MIGR-68488
For security chip, it can be activated by using the SetConfig.vbs script as follows: "cscript.exe SetConfig.vbs SecurityChip Active". Then reboot twice (a technical glitch). You will not have to perform the manual step of pressing F9/F10 or go into BIOS F1 setup when you use this method.
For older systems like T60/T61, we also have a method to activate the TPM in a scripted way. But it is undocumented, and more complicated. If you would like to find out more, please contact me directly. I am happy to help.

T60 not getting past "Checking embedded security chip

Of course my warenty ran out two months ago but this started last week. It started as Firefox crashing and Act!2005 not starting the SQLSERVER service. I ran all kinds of anti-virus and malware finders to no avail.
Now, during boot up process, it gets stuck and will not proceed past "Checking embedded security chip" during bootup.
I have researched the issue and tried several things like deactivating the chip and fingerrpint in BIOS but nothing seems to work. At one point I was able to get to a WINDOWS login where you have to hit CTL-ALT-DELETE and it came up with my user name. I entered the password I use during a normal login but it failed. I tried my user name@LENOVO-<my computer number> and that did not work either.
I am at the point of backing up through resue/recovery then burning a factory install disk and starting over but I REALLY(!!!) don't want to have to do that.
Any ideas are very much appreciated!
My machine is a T60 type 8744 purchased in January 2007.
Many thanks!

Hello T60user12, welcome to Lenovo forums.
I have merged yours threads cause it´s a similar problem.
Seems as you have messed up you system.
Which antivirus and firewall do you use?
Follow @LenovoForums on Twitter! Try the forum search, before first posting: Forum Search Option
Please insert your type, model (not S/N) number and used OS in your posts.
I´m a volunteer here using New X1 Carbon, ThinkPad Yoga, Yoga 11s, Yoga 13, T430s,T510, X220t, IdeaCentre B540.
TIP: If your computer runs satisfactorily now, it may not be necessary to update the system.
English Community Deutsche Community Comunidad en Español

X60 Security chip hang up

Similar Messages

Maybe you are looking for