X60T Driver issues/missing

Hi, I thought I'd better join up as I've scanned through many similar issues on the site & none seem the same as my or have any useful tips.
A couple of weeks ago my HDD destroyed itself so I had to install WinXP from scratch
I also have SP2 & 3 installed.
I Dloaded all of the drivers I thought I would need from Lenovo Driver Support page & installed them
So, my Standby doesn't work & neither does the Audio (I get system sounds but no actual Audio). I have tried to install the WiFi Net driver & that doesn't appear to work either
Also in Device Manager it's saying I have 6 drivers missing which are - Network Controller, PCI Device, Unknown Device, Video Controller & Video Controller (VGA) - how many drivers do these **bleep** things require???
Video controller is installed already
Device Manager looks like this-
[IMG]http://i298.photobucket.com/albums/mm246/THE_MAD_RKH/20130315_124626_zps68d7a969.jpg[/IMG]
[IMG]http://i298.photobucket.com/albums/mm246/THE_MAD_RKH/20130315_124712_zpse3cc171f.jpg[/IMG]
Any help much appreciated, Thanks

Sorry you're having problems with this.
SP3 isn't just for Office. MS Windows Update should give you a download update for SP3. Don't do the standalone update as that's for developers. Windows Update should give you a smaller version to install. I don't think TVSU will run without it.
Use IE8
Dave
T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
If someone helped you today, pay it forward. Help Someone Else!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Similar Messages

Very slow wine game/nouveau driver issue

Hello everyone, I'm trying to play a game (Civ 4) using wine. However, it was extremely laggy, and since it runs well on Windows (I have dualboot) plus it's not a very recent game and my laptop is reasonnably well-equipped, I thought it should work well on arch as well. Here is the link in the wine db. I should also add that I'm a very novice wine user so that might well be the (a) source of problem(s). Apart from the lagging, according to the sensors, the CPU's temperature rose from ~50°C to ~100°C within about A MINUTE.
I checked cpupower to see that the cpu was allowed to run at max speed and tried optirun to use the NVIDIA graphics card rather than the Intel graphics card I have installed. I'm by no means sure that the drivers are installed or configured properly by the way...
Starting with optirun looked to work (the loading screen came up) but when the main window should've been loaded, the application terminated with the following output:
err:winediag:wined3d_dll_init The GLSL shader backend has been disabled. You get to keep all the pieces if it breaks.
libGL error: dlopen /usr/lib32/xorg/modules/dri/nouveau_dri.so failed (/usr/lib32/xorg/modules/dri/nouveau_dri.so: wrong ELF class: ELFCLASS64)
libGL error: unable to load driver: nouveau_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: nouveau
libGL error: dlopen /usr/lib32/xorg/modules/dri/i965_dri.so failed (/usr/lib32/xorg/modules/dri/i965_dri.so: cannot open shared object file: No such file or directory)
libGL error: unable to load driver: i965_dri.so
libGL error: driver pointer missing
libGL error: failed to load driver: i965
[VGL] ERROR: glXCreateContextAttribsARB symbol not loaded
terminate called without an active exception
Before today I only used optirun for VLC (though I don't really see a difference) and to check whether it would run with glxgears. Neither case had any problems. I tried softlinking nouveau_dri.so from the "/usr/lib/..." to the "/usr/lib32/..." directory as well as copying it but neither helped.
Some info:
Graphic cards:
01:00.0 3D controller: NVIDIA Corporation GF117M [GeForce 610M/710M/820M / GT 620M/625M/630M/720M] (rev ff)
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
Packages:
local/xf86-video-intel 2.99.916-2 (xorg-drivers xorg)
X.org Intel i810/i830/i915/945G/G965+ video drivers
local/xf86-video-nouveau 1.0.11-1 (xorg-drivers xorg)
Open Source 2D acceleration driver for nVidia cards
local/nouveau-dri 10.2.8-1
Mesa drivers for Nouveau
local/bumblebee 3.2.1-3
NVIDIA Optimus support for Linux through VirtualGL
Some advice how to fix the driver issue or about what else might be causing the problems is greatly appreciated!

Besides agreeing with the notion above, you lack lib32-nouveau-dri and thus are unable to use acceleration with 32bit programs which is the undelying issue here.

'Driver]Parameter missing' Error while trying to pass parameter to MS query & Return Data to Microsoft Excel

I am trying to set up a parameter query using ODBC-Microsoft Query
to BMC Remedy The ODBC connection is "AR System ODBC Data Source".
I want to pass a parameter to modified date field and get all the remedy tickets for which the modified date is<= to the passed parameter date.
So in MS query, SQL-
the query looks like
WHERE ("Trouble Ticket"."Create Date">={ts '2014-10-01 00:00:00'}) AND ("Trouble Ticket"."Modified-date"<=?)
I am getting the data fetched from database in the MS query window, but unfortunately
When I click File-Return Data to Microsoft Excel, its showing an error: Driver]Parameter missing
I set the connection properties- parameter-Prompt for value using the following string.
Please help

Hi,
Based on the error message, I recommend we try the suggestion: Replace all "..." with [...]
http://www.pcreview.co.uk/forums/error-parameter-query-odbc-remedy-bmc-software-com-t3232964.html
Then, if you want to connect the Remedy's oracle database, please see the thread:
http://www.tek-tips.com/viewthread.cfm?qid=1123112
We may try the workaround: Write an Excel macro which connects to the database and fetch the data based on the SQL query.
Please Note: Since the web site is not hosted by Microsoft, the link may change without notice. Microsoft does not guarantee the accuracy of this information.
If you have further question about write macro, I recommend you post the question to the MSDN forum for Excel
http://social.msdn.microsoft.com/Forums/en-US/home?forum=exceldev&filter=alltypes&sort=lastpostdesc
The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

My CD/DVD drive is missing.

My dvd/cd optical drive is missing from "my computer" , and the hardware manager. It does spin, and is listed in bios. Physically disconnected and pulled it from the bay then reinserted but no sucess. Ran "Driver Tool" which showed the optical drive as disconnected. Is this hardware or software/driver issue? Could there be a "loose" ribbon connection at the drive end or motherboard side?
Compaq Presario F767 NR laptop
Windows Vista

Hi Bryan
Thanks for the assistance. I tried a hard reset as you suggested but still nothing. I was able to borrow a dvd/cd drive from a friend with the same laptop. I switched it out and still nothing. I have to assume there is a software issue/conflict. I don't use the dvd/cd drive often so I'm not even sure how long ago this happened. The only unusual activity on this machine was about 2 months ago when my kid used my laptop to update his iPhone. It got stuck in update mode and had to download a few programs to fix it. When I open "my computer" along with my D and C drive is an "unspecified" File manager instead of the E drive:
I tried to uninstall it but there isn't anything listed in the control panel/uninstall. Right click on it and the only option is to create a short cut. Any thoughts/suggestions?

LR 4.4 Import Issues - Missed a Cure?

Hello Everyone,
Since upgrading to 4.4, I have experienced a number of new issues. 4.3 was solid as a rock in comparison. 4.4 is causing me to need to manually terminate and/or restart the application numerous times daily, sometimes numerous times hourly. It clearly needed more bake time.
I am posting this thread because, after reading numerous similar posts (I find I'm hardly alone) and hundreds of responses, it is not clear to me there are any solid solutions. If there are, and I missed them, I am hoping someone will simply point me toward the appropriate URL.
My primary issue surrounds Import.
The Import function has been repeatedly (not just once or twice, but interiminably):
Hanging, becoming unresponsive after telling it to execute the Import. This is frequently noticed immediately, at file #1.
Incredibly slow, eventually grinding to a halt after a handful of files.
Sources are dropped. Initially all sources are listed. Then, especially with sources (e.g. card reader, smartphone) having > 100 files, the source simply is removed from the listing. You can toggle the arrow on other sources (e.g. to expand file folders), but nothing happens other than the arrow toggling up/down.
Only solution, restart (frequently requiring manual process termination) and try again. I have seen discussions regarding smartphones. It was never an issue with 4.3. With 4.4, my iPhone 4S will populate the preview grid, but after about 2 minutes, it disappears and the grid goes blank.
Importing large number of files (regardless of source) will populate the grid but frequently have the exclamation mark with a number of the preview images. Only solution I've found, delete effected files from catalog, then reimport.
Modifying import settings, such as my copyright or related info, will terminate LR altogether, about 30% of the time. This happened to a number of us at a LR training class this past weekend (different machines, OSes).
Importing 764 JPG from my iPhone (while writing this) has been going about :30 and is 1/3 (indicated) complete. We're at the point of about 1 image imported ever ~5 seconds, reinforced by the entire grid object being refreshed each time. I would consider importing a handful of files at a time, but if I do much more than select the iPhone as source and hit Import as soon as the grid populates, the source is lost, and everything starts over.
One instance of an 'insufficient memory' error.
There are other niggling issues but Import is a major mess. From what I've read (and, again, I see I'm not alone), these issues are common for both Windows and Mac, newer PCs and older, and in all manner of mixed environments.
My own situation is a Windows 7 Ultimate, Dell E6400, 4GB RAM, LR 4.4. In all cases I am reading my cards via the built-in card readers. Primary cameras are a Canon SX260 (JPG only) and Konica Minolta Maxxum 7D shooting (almost always) RAW (.MRW). My content is solely pictures, no video.
With regard to the smartphone discussion, I have experienced these problems with the laptop docked, undocked, with or without smartphone attached.
The only relief I have found is, when working with a memory card having >100 images (not many, in the grand scheme), to copy files to a local hard drive, then import from there. The impression I have, is that the speed allows quicker execution, getting ahead of any resource contention issues. Purely a gut feel thing based on observed behavior. Nonetheless importing from HD rather than SD does work better.
Clearly 4.4's Import has issues. Any word of a service patch or 4.5?

Uninstall 4.4 and re-install 4.3 is the normal process for downgrading.
Others don't necessarily have the problems you're seeing, so to me it's less likely a fundamental flaw of LR 4.4 that wasn't tested well enough, and more likely a hardware or driver issues that LR 4.4 is bringing to light.
It may be that LR 4.4 is using different USB libraries or different OS-level functions to interact with the removable devices, perhaps to resolve other issues reported in previous versions, so something working differently wouldn't be unexpected. It is less expected that whatever LR 4.4 is doing would cause problems on a particular computer, though. It might be wise to figure out what is wrong on your system when LR 4.4 is in use, but obviously you also need to have a functioning workflow as well.
For experimentation, I think it is possible to have both LR 4.3 and LR 4.4 installed at the same time, if your rename the LR 4.4 program folder to something completely different before doing the install for LR 4.3, and then rename it back when you're done.
You also might want to try the beta for Lightroom 5 at Adobe Labs http://labs.adobe.com/ to see if it works any better and report any issues to the LR5-beta specific discussion forum (not here).

HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit

Hello,
For some time now I have been unable to scan or print from my desktop (Windows 7 Professional 64bit) and I have exhausted too much effort and am now bringing it to the masses.
The problem:
Printing: Currently receiving an "Error - Offline" message in my printer queue at all times.
Scanning: Scanning has never fully worked on this desktop. I am always unable to communicate with the printer. (Though webscan works through accessing the printers IP address)
Things I have tried:
Ran HPPSDr, followed directions (Unpluged power to printer, turn back on, restart computer) brings me to this website after it cannot fix. (Note that while the HPPSDr is running it always notions that there is a driver problem)
Uninstalled Drivers from CD-ROM, re-installed, countless times
Installed "Windows 7 Pro 64 bit drivers" from the HP website and uninstalled, countless times.
Attempted to set a static IP and use "Update IP Address" to point specifically at the printers IP.
Installed Drivers and finding the printer myself through it's own static IP address.
Turned off firewall and attempted to print (after reboot), same errors
Setting up the printer on all of my laptops (3) wirelessly to attempt to find if there is a problem with the printer or static IP. (1 is Windows VISTA 32bit and the other 2 are Ubuntu 32bit). All laptops are able to use the printer wirelessly without any problems.
Read all of the forums about this issue and attempted all of the 'solutions'. Although I mostly don't see that anyone with this same problem is resolved, unless I'm missing the perfect post.
Things I have not tried:
Plugging the USB directly into the desktop. (This seems self defeating as the purpose for this printer was to be able to print wirelessly to it from across the room)
Re-installed Windows 7 Pro 64bit (Trying to avoid this, would rather just print from laptops)
You tell me
Curiosities:
I have noticed strange things that make me believe the driver is somehow incomptable with my OS. Here is a shot of the properties of the printer:
Weird that it is not recognizing the model number.
Also in the Printer Settings when I go to the port tab, there is no port selected, if I try and tab away it forces me to select a port, yet when I do and 'apply' and then re-open the Printer Settings in the ports tab; it has again unselected the previously selected port.
Theories:
I feel like my OS is just refusing to notice the IP address for the wireless printer, no matter what I have it set to, even if it's dynamic. It's like the driver for Windows 7 Pro 64bit is actually not the correct driver for my system.
Anyways, another thing to mention is that I am not currently willing to wipe my operating system and re-install Windows 7 Pro in order to resolve this just yet. I want to see if anyone else has any other avenues I can try before even beginning to consider that.
Anyways, thanks in advance for taking the time to read my ramblings and hopefully someone who has resolved this issue can help me.

Hi Zerosouls,
I understand you are having an issue with HP 6600 Scan\Print Driver Issue for Windows 7 Professional 64 bit.
First try to click the Windows icon, type services in the Search box, and then click or tap View Local Services. Scroll down to the Windows Installer. Startup type should be - Automatic, and Service Status should be - started
Restart the computer after this step and try installing Hp Officejet 6600 again.
Please let me know what happens
Thanks
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

I have a laptop an hp dv6700, running vista the dvd drive is missing how do i get it back?

Greetings this is my problem?
I have a beautiful HP Laptop the dv6700 Series, running Vista, on this Computer i have a DVD Player, with my media center, and the drive.
Now the drive is missing, and now I can not burn anymore DVD's, or play any of them either can anyone help me find a solution to this issue please?
This question was solved.
View Solution.

Okay, let's check the following:
>> Do you see the DVD drive listed in "Computer" explorer? double click on it to open.
>> Do you see the DVD drive listed in the device manager??
(Click Start and type "device" in the search field, then select Device Manager >> check for CD/DVD drive listing.)
>> Is the DVD drive listed in the BIOS?
(Restart Your PC and start tapping F10 key, once you are in setup screen go to boot options, check for the listed devices)
also please download and run this program:
http://support.microsoft.com/mats/cd_dvd_drive_problems/en-us
||-Although I am working on behalf of HP, I am speaking for myself and not for HP.-||
//Click on Kudos if my reply was helpful and answered your question//
||-If my answer solved the problem please mark the topic as the accepted solution-||

Windows 8.1 BSoD & driver issue

Hello,
I was hoping someone could help me out here. Let me describe the issue. For quite a while I was using Windows 8.1 fine and did not have any problems, however I recently burned my PSU somehow and then the problems started. Which I somewhy find odd, cause the
BSoD's are related to a driver issue(?). The driver which seems to cause the problem, is
Intel(R) Engine Management Interface.
"This device cannot start. (Code 10)
A device which does not exist was specified"
Event Viewer displays the following error:
"Intel(R) Engine Management Interface driver has failed to perform a handshake with the Firmware."
Since it says "A device which does not exist was specified.", I assume I don't need this driver at all, so I tried disabling it and uninstalling, but it keeps coming back every time I restart my PC. I even tried looking for a newer driver, but couldn't
find anything. The newest driver is for Windows 7 x64/x86. I found out you could possibly disable it in bios, but I couldn't find the option to do so in my bios. I went thru every option 1 by 1, just to make sure, I wouldn't miss it.
Here's my PC:
Motherboard: Gigabyte GA-H55M-S2 (F4 BIOS)
CPU: Intel i3 540 @ 3.07GHz (Overclocked to 4,03GHz)
Cooler: Cooler Master Hyper 212 EVO
GPU: NVIDIA GeForce GTX 660 (GV-N660OC-2GD)
RAM: 2 x Kingston 4GB 1333MHz DDR3
HDD: Western Digital 500GB
At the very moment, I have installed a fresh copy of Windows 8.1 Professional x64 and the problem still seems to exist. I have tried and googled for everything I can think off, now I'm just stuck at this problem.
I hope someone can help me out here, or at the very least, guide me in the right direction.
Link to minidump: http://1drv.ms/1H6E4uh

Use !analyze -v to get detailed debugging information.
BugCheck D1, {fffff8012d4359f0, 2, 8, fffff8012d4359f0}
Probably caused by : ntkrnlmp.exe ( nt!KiPageFault+23a )
Followup: MachineOwner
2: kd> !analyze -v
* Bugcheck Analysis *
DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If kernel debugger is available get stack backtrace.
Arguments:
Arg1: fffff8012d4359f0, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, value 0 = read operation, 1 = write operation
Arg4: fffff8012d4359f0, address which referenced memory
Debugging Details:
READ_ADDRESS: GetPointerFromAddress: unable to read from fffff80108f64138
unable to get nt!MmNonPagedPoolStart
unable to get nt!MmSizeOfNonPagedPoolInBytes
fffff8012d4359f0
CURRENT_IRQL: 2
FAULTING_IP:
+8c228a89b114
fffff801`2d4359f0 ?? ???
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN8_DRIVER_FAULT
BUGCHECK_STR: AV
PROCESS_NAME: svchost.exe
ANALYSIS_VERSION: 6.3.9600.16384 (debuggers(dbg).130821-1623) amd64fre
TRAP_FRAME: ffffd00027a58120 -- (.trap 0xffffd00027a58120)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0a00000000000020 rbx=0000000000000000 rcx=0000000000000002
rdx=fffff8012d4359f0 rsi=0000000000000000 rdi=0000000000000000
rip=fffff8012d4359f0 rsp=ffffd00027a582b0 rbp=0001da10001da171
r8=00000000001da130 r9=02200000001da347 r10=7100a1ef05420000
r11=0000000000000042 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei ng nz na po nc
fffff801`2d4359f0 ?? ???
Resetting default scope
LAST_CONTROL_TRANSFER: from fffff80108d5d4e9 to fffff80108d519a0
FAILED_INSTRUCTION_ADDRESS:
+8c228a89b114
fffff801`2d4359f0 ?? ???
STACK_TEXT:
ffffd000`27a57fd8 fffff801`08d5d4e9 : 00000000`0000000a fffff801`2d4359f0 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
ffffd000`27a57fe0 fffff801`08d5bd3a : 00000000`00000008 ffffe000`8f89b0f8 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
ffffd000`27a58120 fffff801`2d4359f0 : 00000000`00000000 00000000`00000000 00000000`000e293f 00000000`00000000 : nt!KiPageFault+0x23a
ffffd000`27a582b0 00000000`00000000 : 00000000`00000000 00000000`000e293f 00000000`00000000 00000000`0001358b : 0xfffff801`2d4359f0
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiPageFault+23a
fffff801`08d5bd3a 440f20c0 mov rax,cr8
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiPageFault+23a
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 54c832b2
IMAGE_VERSION: 6.3.9600.17668
BUCKET_ID_FUNC_OFFSET: 23a
FAILURE_BUCKET_ID: AV_CODE_AV_BAD_IP_nt!KiPageFault
BUCKET_ID: AV_CODE_AV_BAD_IP_nt!KiPageFault
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:av_code_av_bad_ip_nt!kipagefault
FAILURE_ID_HASH: {73cd60cc-83fa-6b76-df08-1961c31d7403}
Followup: MachineOwner
It points to incorrect memory page access obviously. It generally caused by some driver like you found. update all drivers should be resolved. Have you tried ever?

ITunes doesn't recognize iPhone and Apple Mobile Device USB Driver is missing

Hi. iTunes does not recognize my iPhone when I connect it to my PC via USB. I found iOS: Device not recognized in iTunes for Windows and went through the listed steps to diagnose the problem. The problem seems to be the Apple Mobile Device USB Driver. It is not listed in Device Manager and it does not seem to be installed on my PC. I followed directions for "If the Apple Mobile Device USB Driver is not listed" and I was not able to find anything. In that case there are no further steps that you can take listed on iOS: Device not recognized in iTunes. I then uninstalled and reinstalled iTunes and other software components (http://support.apple.com/kb/ht1923) three times but each time Apple Mobile Device USB Drive was missing. If anyone can advise me I would greatly appreciate it.
iTunes: iTunes 11.1.5 for Windows
iPhone: 4.3.3
PC: Windows 7

See TS1538: iOS: Device not recognized in iTunes for Windows, in particular section 5.
See also Troubleshooting issues with iTunes for Windows updates.
tt2

R61 driver issues/ blue screen

Hello all:
I have a 2008 R61 (7733) Serial (L3-G5721). I got this computer through my college at the time, and over a 2 year span I had 4 or 5 HDD replaced through the Lenovo service program on campus. Now I recently replaced my HDD 2 times so far since leaving my school in 2010, none were for bad HDD's like previously. I had Issues with Lenovo/Windows drivers. Now on my 3rd an WD black. What I would like to know is my HDD or Motherboard is having driver issues?!? How can I fix this?!? Is their a program that can diagnose what driver is causing my blue screens and also keeping me from booting up the laptop past the extended boot screen?!? Love that laptop so much runs like a tank besides the HDD problem it's very solid any help is appriciated.
Sincerely:
Christopher Patti

Hi,
Do not rely solely on System Update to maintain your computer. It frequently is weeks, months and even years out of date. Some updates never get to System Update at all. In addition, the driver matrix does not contain all patches and updates. Because you don’t have a preload, it is possible that you are missing some critical updates, which may not be in the Driver Matrix, and I am not sure if they are available using System Update. I suggest that you verify if the following updates are installed on your computer.
Rescue and Recovery patch to fix the blue screen issue caused by the lack of the AHCI driver - Windows XP
- See document: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS002238
Intel Chipset Support for Windows 8 (32-bit, 64-bit), 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) – ThinkPad
- See document: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS014952
Intel Chipset Support for Windows Vista, XP, 2000 - ThinkPad Reserve Edition, R61, R61e, R61i, T61, T61p, X61, X61s, X61 Tablet, X300
- See document: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS01318
Monitor file for Windows 7 (32-bit,64-bit), Vista (32-bit,64-bit), XP (32-bit,64-bit), 2000 - ThinkPad
See document: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS015012
There might be others, but these come to mind first.
Here are some examples of System Update being out of date:
Update Retriever and System Update contain drivers for System Migration Assistant 6.0, at version 6.00.0009, while the Driver Matrix and Drivers and Software pages indicate the current version at 6.0.010 (released on Nov 23, 2009).
Enabling Wake on LAN from Standby for ENERGY STAR Version 4.0 for Windows 8 (32-bit, 64-bit), 7 (32-bit, 64-bit), Vista (32-bit, 64-bit), XP (32-bit, 64-bit) - ThinkPad
- See document: http://support.lenovo.com/en_US/downloads/detail.page?DocID=DS013949
- Update Retriever and System Update contain drivers for Enabling Wake on LAN from Standby for ENERGY STAR Version 4.0, for version 1.06, while the Driver Matrix and Drivers and Softwarepages indicate the current version at 1.07 (originally released on Feb 15, 2011).
I even tried submitting site feedback, rather than opening a dialog using the Lenovo Forums to get some of these problems fixed. The astonishing response I got back from the Lenovo Web Content Team was:
Dear Valued Customer,
Thank you for your feedback. We have checked the link that you have provided. Yes, the current version is the one in the document, however since we haven't received the latest xml file for the driver, that is why in TVSU contains the previous driver update. In the meantime, please download manually. We will update TVSU with the latest package as soon as we receive it.
Thank you for contacting the Lenovo Web Content Team. http://support.lenovo.com
Case Number – 00224092
Do some research and see if this helps. Good luck.
ThinkPad R61 8932-CTO T8300 2.40 Ghz 3GB RAM Win XP
ThinkPad R500 2714-CTO P8600 2.40 Ghz 3GB RAM Win XP; Two ThinkPad R500's 2714-CTO T9600 2.80 Ghz 4GB RAM Win 7
ThinkPad T500 2241-DB9 T9600 2.80 Ghz 4GB RAM Win 7
ThinkCenter A63 5237-CTO 3GB Ram Win XP; A21m and a pair of 380XD's

Macally Icekey driver issues

The Macally Icekey driver has a serious problem.
It was evidently built with some debugging code, because it floods the console log with multiple lines of debug messages for every keystroke.
This not only makes it hard to find things in the console log, it makes it very difficult to use the console because of the messages. For example, booting to single user mode you cannot see the command line because of the spew.
The messages look like this:
5/1/09 03:47:43 kernel test handlereport
5/1/09 03:47:43 kernel the 0 position is 0, len = 8
5/1/09 03:47:43 kernel the 1 position is 0, len = 8
5/1/09 03:47:43 kernel the 2 position is 0, len = 8
5/1/09 03:47:43 kernel the 3 position is 0, len = 8
5/1/09 03:47:43 kernel the 4 position is 0, len = 8
5/1/09 03:47:43 kernel the 5 position is 0, len = 8
5/1/09 03:47:43 kernel the 6 position is 0, len = 8
5/1/09 03:47:43 kernel the 7 position is 0, len = 8
That's what a single keystroke generates in the console log.
It also makes the machine sluggish at times, or can cause missed keystrokes.
Macally seems to have no interest in fixing this and from what I have read tells users who email them "Sorry, we have no plans to fix this."
However, some users in a thread last year reported that the older Icekey drivers did not have this problem and worked much better.
Does anyone know how to get one of those old drivers or where they might be stored?
Again, Macally is no help, and this is a pretty serious issue. I paid $50 for this keyboard and I like it, but if I can solve this problem I'll end up having to toss it.
Thanks.
Message was edited by: cshapple

I really don't like laptop keyboards as much as full travel mechanical anyway, and rubber-dome keyboards hurt my hands except for the very best of them.
I did try the new Apple keyboards, and I think they are far too light and small, and the key shapes and layout is pretty terrible. I realize a lot of people like them, but I don't like them.
Also, when I played with the new Apple keyboards, they did require drivers and the drivers were buggy, so I'm not sure what you mean about no driver issues.
I have heard that the Logitech Dinovo series has a little more key travel, but is otherwise a mechanical scissor setup, so I might try one of those eventually.
It's pretty silly for a keyboard to need a driver in 2009. All of the keys can be added to a standard decoded matrix without a driver.
I would like to see Apple make their aluminum keyboards heavier, larger, and with a more standard key shape and layout, and add another 1-2mm of key travel. That would sell me and a lot of other people.
Oh and please, no drivers...

N91 driver issue ~ Windows vista !

Hey there !
N91 driver issue ~ Windows vista !
i recently upgraded my OS fro XP pro to vista ultimate,
carrying all the program files and settings,
but then the nokia pc suite in vista didn't recognize or load drivers for N91, when connected as
(1.) pc sync
(2.) USB hdd.
so in -all pc suite wasn't running.
so i uninstalled and re-installed pc suite,
now it does connect and loads drivers when connected as
(1.) pc sync
but doesn't loads drivers (keeps on searching~ from CD and windows update) as a USB HDD,
so I can't drag and drop my files in it.
any solution to this !

The combination is complicated - VISTA / PCSuite 6.83...
Both are not reference of good behavior.
On Vista, miss a lot of drivers, even for N91, and PCSuite 6.83 is unstable and unreliable. So maybe, you don´t have a problem, and need to leave with that until both, or at least one of then have an upgrade.

Z68A GD80 G3 Hard Drive issue

My hard drives keep disappearing. Everytime I boot one of them is gone. Maybe 1 out of 10 boots will show both drives. The DVD drive seems to always show up but not both hard drives. I have tried ide, ahci and raid mode. Option rom doesn't always show up when set to raid mode. Even with 1 drive installed it would list it in the boot order but in the system status it would list as not present.
Tried multiple Bios from latest stable to latest beta. Always reset bios afterwards with removing power cable and battery. Went out and bought new sata cables. Moved from sata 3 to sata 2 ports and it happens no matter what.
I have 1 western digital caviar blue 640gb and 1 OCZ vertex 2 60gb. I initially tried to do SRT but whenever I rebooted it would be disabled. Logging into windows after removing the acceleration would work and then I could log into Intel RST and it would say the drive was missing (even though I just booted from it).
Is there an update somewhere or something. Is this normal behavior? Is this a common problem? I have seen people talk about it on other motherboard manufaturer forums.

Something is wrong with the motherboard. I got windows reinstalled on the new hard drive I bought and there are too many issues going on. Seatools lists both driver's as failing the short drive self test. Devices will randomly be found by Windows. After sitting here for 2 hours it just popped up that it found some thermal sensor. Internet explorer will randomly go unresponsive and need to be force closed. every time I try to shut down windows it hangs on the exit windows sound which needs to be force closed. Intel SRT sets up fine then disables at reboot saying that the SSD is missing but when I go into the option ROM it says in sync and lists it as a caching drive.
BTW Aida64 lists the 5v as 5.003v I know the on board sensor isn't as precise as a digital multimeter but that is well within tolerances.
Unless someone has any idea what it could be I am going to request a replacement from Newegg tomorrow.

MSI Z77a-G45 graphics driver issue.

02-june-2013
MSI Z77a-G45 graphics driver issue.
Trying to install the graphics drivers for this board from the MSI site, I but every time I do so on loading windows 7 my monitor just goes to sleep and I have to roll back the driver in safe mode. This is the same for the driver found in the windows 7 updates.
Iv downloaded the files a few times over and reinstalled windows twice and the problem remains. Can anyone suggest anything? Is there something I’m missing or need to set in the UEFI bios for using the onboard graphics?
MSI Z77A-G45, i5-3570K, 2x 8GB Corsair memory, Windows 7 64bit.
Thanks.

My BIOS is E7752IMS V2.10
Iv already downloaded V2.A
However I have to say the guide at uk.msi.com/service/biosupdate/ , appears to be putting v2.2 on top of v2.2.
it also says "Download the BIOS that matches your motherboard and version number to your USB device."
I'm not entirely sure what is meant by 'version number' but it dose suggest i need to download V2.10 not V2.A ... call me picky but i want to be sure! lol.
Can anyone confirm ether way? It dose seam rather odd!
Thanks.
**edit
Update on my graphics issue
With the default driver, just before the windows 7 log in screen appears. I was getting a portion of it appear first on the bottom 1/8 of the screen. Now its appears to be a snowstorm of bad graphics and its the same when I switched to using HDMI instead.
Not sure if that's a good sign!
For reff my screen is a HP LP2475w tho I'm rather sure there is nawt wrong with the screen.

Sometimes my computer takes too long to connect to new website. I am running a pretty powerful work program at same time, what is the best solution? Upgrading speed from cable network, is it a hard drive issue? do I need to "clean out" the computer?

Many times my computer takes too long to connect to new website. I have wireless internet (time capsule) and I am running a pretty powerful real time financial work program at same time, what is the best solution? Upgrading speed from cable network? is it a hard drive issue? do I only need to "clean out" the computer? Or all of the above...not to computer saavy. It is a Macbook Pro osx 10.6.8 (late 2010).

Almost certainly none of the above! Try each of the following in this order:
Select 'Reset Safari' from the Safari menu.
Close down Safari; move <home>/Library/Caches/com.apple.Safari/Cache.db to the trash; restart Safari.
Change the DNS servers in your network settings to use the OpenDNS servers: 208.67.222.222 and 208.67.220.220
Turn off DNS pre-fetching by entering the following command in Terminal and restarting Safari:
defaults write com.apple.safari WebKitDNSPrefetchingEnabled -boolean false

X60T Driver issues/missing

Similar Messages

Maybe you are looking for