X61: Now the buzzing sound/noise comes...

My X61 battery died few weeks ago after 18 months. Now comes the high pitch buzzing noise from inside. I suspect the fan, since I have not seen the HD indicator blinking. Since my warranty expired, I guess nothing Lenovo can do.
Moderator note: Type added to subject line for clarity.
Message Edited by Agotthelf on 24-04-2009 09:42 AM

"I read on a Dutch forum the brightness control could be the reason."
No, that is another sound/noise, mutch lower more like humming.
Read from Finnish forum:
http://www.hopeinenomena.net/viewtopic.php?t=81337&start=275
Apple service told a guy that its the powersupply. Now he's waiting for a new.
I'll report how it went, if that guy posts some results.
I noticed that the buzzing noise can be gone for several days, and then suddenly apear again.

Similar Messages

  • I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume

    I've recently spilt a little bit of water on my Macbook Pro 13" and some of it went into the keyboard, the first thing I did was get paper towels and dry it off, everything is except now the speakers sound different, and a little bit lower in volume, basically the speakers just sound weird, there's no word to describe it, I can't really hear any bass from my speakers

    Liquid spills, why your MacBook chassis is a one-way valve for spills
    After a substantial spill many people will turn their notebook upside down and shake it, not only does this not work, but it spreads liquid havoc throughout your machine and makes things often as bad as possible.
    The keyboard itself acts like a one way valve in the case of a substantial liquid spill. While liquid pours into the bottom chassis easy, it does not come out easily at all, and in the case of any spill, most of it will not come out by turning it upside down. Disconnect all power and contact Apple for diagnostics and repair.
    Do not attempt to, after a spill, ‘dry out your MacBook’ and test it
    After a spill most people invariably try to “dry out” their notebook by various methods, including hair dryers and otherwise. This both does not work, and after a substantial spill of any magnitude, even if the liquid was water, residue is left behind.
    There are additionally many very tight places inside your notebook where liquids will linger for a very long time, and cause corrosion or worse.
    Immediately unplug your notebook and contact Apple for in shop diagnostics and parts replacement.
    In the case of very minor spills people will “dry out” their notebook and feel success that their notebook is working ok, however invariably in nearly all instances after 4-14 days an error / fault pops up and is usually followed by more.
    In case of a spill, damage estimates are impossible,.....anything can be fixed, without question.......the question is cost.
    contact Apple for in shop diagnostics and cost estimation ....possible parts replacement.  

  • I want to email a Pages document as a Word doc. I used to be able to do this by clicking on share then send via mail then on Word and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    I want to email a Pages document as a Word doc. I used to be able to do this by clicking on 'share' then 'send via mail' then on 'Word' and an email would appear with my word doc attached.  Now the email does not come up.  Why?

    It's difficult to do more than guess when you don't say what version of OS X or Pages you're running, but if you're on the latest, have you tried the Share menu -> Send via Mail command?
    If that doesn't help, you may have better luck if you ask in the Pages forum:
    Pages
    When you repost, be sure to include full details about your versions so that people know what it is you're working with.
    Regards.

  • I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be seperated. What is going on here?

    I have 2 iphones on one itunes account. I just upgraded both to ios 8 and now the messages i receive come through to both phones when they used to be separated. What is going on here?

    I noticed the same problem after upgrading a few iPhones to IOS 8, all use the same Apple ID.  However, I now notice when I go into Message and instead of selecting a person from my contact list, I start typing their name which brings up a list of people, some of which are not in my contact list and are on one of the other iPhones. There's a circle/exclamation point next to the name which I click on, and one of the options is to "Remove from Recent". How did these names get from one phone to another and how do I remove all "recents"? They do not appear in my contact list. Anyone see this?

  • TS1591 My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.

    My iphone 4 randmonly started going into recoveery mode when i was trying to download ios 7.1, and now the apple logo will come one and then fade to black and continue this process. My iphone wont restore either and will get the 3194 error message.Help please!

    Hello chindeepchow,
    Thank you for using Apple Support Communities.
    For more information, take a look at:
    Resolve specific iTunes update and restore errors
    http://support.apple.com/kb/ts3694#3000
    Resolve communication issues
    Related errors: 17, 1004, 1013, 1638, 3014, 3194, 3000, 3002, 3004, 3013, 3014, 3015, 3194, or 3200. These alerts refer to gs.apple.com, say "There was a problem downloading the software," or say the "device isn't eligible for the requested build."
    Check the hosts file or TCP/IP filtering, which might cause communication issues between iTunes, ports, and servers.
    Have a nice day,
    Mario

  • HT4623 i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..

    i pressed update on my iphone4 and now the apple icon just comes on and off every 10 secs and i cant turn on my phone. please help me..

    Hello dagobertofromelsalvador,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Best of luck,
    Mario

  • Windows 10 and the buzzing sounds (and what should be done)

    Hi
    A week ago i bought myself a HP Pavilion X2 11 inch tablet/laptop and upgraded to Windows 10 (as was advertised).
    After the upgrade i get a buzzing sound when i use the Windows 10 apps, Youtube or any integrated program.
    After a week of investigation i found out that the driver that is used for the Realtek IDT HD Audio is packaged by HP in 9th of July but the underlying driver from Realtek is from December 2014.
    Realtek and Microsoft fixed the issue with the Realtek driver published on 3/2/2015.
    Realtek HD Audio fix for Windows 10
    So HP will need to repackage it's Realtek HD Audio driver for it's machines to make it fully Windows 10 compliant.
    "So HP, is there any update on the way that gives us full Windows 10 compatability?"

    Hi ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues with help from the community!
    I came across your post about the Notebook, and wanted to assist you! I have looked into your issue about your HP Pavilion 11-h100eo x2 PC and Windows 10 updates for your Audio drivers. Here is a link to your Driver page. The update you need it Intel Management Engine Interface (MEI) Driver under the Chipset.
    Here is a link to the HP Support Assistant, it was included in your system. You could run that for any updates that might be needed. When the Windows 10 software was install it should have done all the updates that would have been needed. Hope this helps. Thanks.

  • Droid maxx shut off. Now the green droid icon comes up and it goes black again.

    I was talking on it and it shut off. I tried to do a reset with the power and down volume. The green android icon comes up, it vibrates, then goes black. Just before the phone call it showed several apps weren't working even though I wasn't using them.

    I'm sorry to learn that your phone is not powering on completely Amy! I see that you posted a couple days ago, have you called us or visited a store to troubleshoot yet? Is there any physical/water damage to the phone? Is it within the 12 month manufacturers' warranty?
    AntonioC_VZW
    Follow us on Twitter @VZWSupport
    If my response answered your question please click the "Correct Answer" button under my response. This ensures others can benefit from our conversation. Thanks in advance for your help with this!!

  • I accidently erased all content on my ipad, now the only thing that comes on the screen is a language portal and it is some foreign language, cannot change it??

    I accidently erased all content on my ipad, (which my son had set up for me) now the only thing that is on the screen is a language portal, and some language I do not understand.  I cannot change anything on the screen, HELP???

    Slide to unlock then follow the process until you find back from itunes or icloud.

  • Ipod now making buzzing sound

    my ipod suddenly shut off and would not turn back on finally i got it to restart and it had the folder with exclamation point. uninstalled all software and reinstalled. went through updates and tryed to restore ipod. flashed to the language screen then went to the black battery charging screen. then shut off. tried to restart and now when i plug it in it is making a buzzing noise and the screen is flickering with the apple icon. very fuzzy images flashing. i am now going to try the 24 hour drain. please let this work. this whole situation is very frustrating. this all started with the new software update.

    my nano is doing the same thing i have contacted support and asked why and what i can do i wonder if they know how big a problem this seems to be i have only had my ipod for 5 days

  • Daughter dropped it on the carpet with a case now the light won't come on

    My daughter dropped my sisters iPad on the carpet and now it won't come on everything is dim

    Take it to an Apple retailer for help.

  • I updated the video driver and now the screen won't come on? how can I roll back the driver when I can't see the screen?

    I am running my Mac Book Pro with Bootcamp. Leopard on one partition and Windows 7 on the other. I updated the driver for the Nvidia video card then the screen went black. I tried to boot into the MAC side but the screen doesn't even show the optional boot screen. It does however sound like it's booting, I have tried hooking up a second monitor to see if it would show on that but it doesn't. I have also tried booting from the CD using the Win 7 disk, hoping that it would use the video driver on the disk instead. I'm either not doing it right (pressing ctrl & D whilst starting up) or that doesn't work either? I'm a bit lost? Don't know how to get to it.

    Take your MBP to an Apple Store or an AASP.  If you are still under warranty and/or have AppleCare, suggest that you take advantage of it & call Apple tech support. 

  • I updated my iPod touch 4 to the latest OS and now the admin doesn't come up. How can I access the iPod admin?

    I have unplug and plugged in my iPod to my pc 100 times and admin never comes up. When i go to iTunes I don't see anyway to
    get to the iPod admin.  I copied quite a few of my CD's into iTunes but can't find a way to sync the player with the itunes on my computer.
    I don't like the new update...it changed the look and feel of everything...for the worse.

    Many people haven't yet figured out the new default interface in iTunes 11 but it's not that difficult. To get to the iPod information so you can sync, click the iPod button in the header bar at the upper-right, e.g.:
    Or go to the View menu and select "Show Sidebar" and the interface will then look substantially like it did in earlier versions. If you are running Windows and don't see the menus, press Control-B or go to the small icon with the arrow at the extreme upper left and select "Show Menu Bar":
    Regards.

  • HT4061 Downloaded the latest update and now the phone will not come on?

    I just downloadedf the latest update but my phone only shows the itunes symbol with an arrow and a plug gigure below it when I hit the power button.

    Hey mkp55,
    Welcome to the BlackBerry® Support Community Forums.
    How long has the BlackBerry Z10 smartphone been attempting to reboot? Have you reinserted the battery?
    Thanks.
    -HB
    Come follow your BlackBerry Technical Team on twitter! @BlackBerryHelp
    Be sure to click Kudos! for those who have helped you.Click Solution? for posts that have solved your issue(s)!

  • HP pavillion g6 buzzing sound from the internal speakers

    suddenly the internal speakers of my HP Pavillion G6 has started creating a buzzing sound whenever i play music . Even when i turn on the laptop the buzzing sound is there with the  welcome tune. how can i fix it? im very worried about my laptoop.

    Hi Homieboiudoc,
    Thank you for visiting the HP Support Forums and Welcome. I have read your thread on your HP Pavilion g6 Notebook and buzzing on the sound. Here is a document on troubleshooting Audio issues.
    You might benefit from overheating document as there could be dust on the speakers.
    Here is a fix from Microsoft that has helped sound issues.
    1. Right click speaker icon (right hand corner)
    2. Select Playback devices
    3. Right click Speakers
    4. Enable it and set as Default
    5. Click Apply/Ok
    Restart the computer.
    Please let me know how this goes.
    Thanks.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

Maybe you are looking for

  • SQL Query editor misbehaving

    SQL query builder does not allow LIKE criteria for selecting data, as in: SELECT ALL ROOT.PERSON.PERSONID,                          ROOT.PERSON.JOBTITLE,                          ROOT.PERSON.FREQUENTFLYER,                          ROOT.PERSON.NAME   

  • Stms Error Could not start transport control program tp

    Hi Experts, We have installed new system and trying to configure STMS, but we are facing Issue like " Could not Start transport control program tp ". Can anyone please suggest us how to continue further... Tasks we have done : 1. Upgraded kernel, tp

  • 709/709 Source Settings and Export

    I'm working with Sony RAW Lite 4k footage in Premiere, and I keep getting the default 709 LUT applied in my sequence causing unusable blown out looking footage. If I right click the clip and select Source Settings, I can select S-Log in the drop down

  • How to run applets ?

    I know 3 ways to run an Applet . 1.to write html file and include aplet in that file and run in a browser . 2.run appletviewer cmd from cmd window 3I use text pad as a n editor which has tools to compile and run and while running automatically . if t

  • BI : RSA3 Extractor Dump

    Hi experts , I am testing the number of data for 0FI_GL_4 in source system with tcode rsa3. but it is apparently giving me a dump "no memory no paging".  I want to know the number of data that should be loaded into BI. Kindly advise me is there any a