X61 Tablet buttons not functioning under Windows 7

I have an X61 tablet, and I have noticed that the tablet buttons don't work. I installed the Tablet Button driver for Vista, and I'm not sure what else (if anything?) I need to install in order to fix the problem...
 Any advice?
Thanks!
mod edit: split into new thread.   title edited accordingly.
Message Edited by erik on 05-22-2009 08:23 PM

There's a beta driver for Windows 7. However it's not working for me either. I'm using Win7 64bit.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA#tbx61 

Similar Messages

  • Pavilion tx1000 Tablet PC (tablet buttons not functioning)

    Hello,
    I recently changed my operating system from a Windows Vista to Windows 7 (64-bit), for my HP Pavilion tx1000. After that change, the stylus has been sort of off. More importantly, when I turn the lid/screen, the screen image does not auto rotate anymore. Also, the tablet buttons do not work.
    I'm no expert. I tried to go the Control Panel and every time I try to change the Tablet settings for the buttons, it tells me there's no functioning driver..
    I went online, and I tried to install the 'Quick Launch buttons' driver (among others), but the most recent ones online for my PC are  for Vista, and that doesn't work.
    What else can I try?

    Should be able to answer your own question by physically trying to rotate the blades with a thin tool or blowing into the blades & if bearings good it should rotate easily.
    bearings fail, fan motor/boards fail, mainboard control & power can also fail !
    Most modern equipment has almost no real effort in proper thermal control so some modifications may help but you will be limited in what is achievable on a finished product.
    Here in Asia we have done a lot of notebook cooling mod combo's such as vent increases, thermal shims, quality thermal grease & secondary 25 to 30mm 5v case venting fans with internal porting & baffles to help good airflow/heat extraction with great results in reducing overheating & component failure ...
    Should be done at the factory !
    For $10 of parts we reduced a custom dv2500 with T770 & Nvidea graphics by 25% & made the machine reliable & feel safe rather than a lap microwave ...
    Like my post? Click Kudos (thumb+) to show appreciation.

  • Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit

     Rocketfish Bluetooth Keyboard RF-BTKB2 not working under Windows 7 64 bit
    Anyone had successs in this or another Bluetooth Keyboard after a bit of a struggle?  What did you do to get it working?  When I Add Device in Bluetooth it sees the keyboard but enlessly scans for it when I try to select and connect.  The Rocketfish Bluetooth mouse worked just fine.

    My friend, i have both, the bluetooth mouse and keyboard here that your talking about. and the keyboard was a struggle to pair with the windows 7 64 bit.... i think i spent 2 days working with it. and i didnt try anything special, i just kept trying to pair
    it, and unplugging the dongle and working with it... and after a while. it worked... Lately though, i have been looking into getting a wired mouse and keyboard becuase of the delays and sleep time i have with my current keyboard(rocketfish). supposidly there
    is a way around the delays but it disables all the options on your keyboard. IE the media buttons, and web browsing features. and my mouse keeps dieing off too....
    Also, after researching these products more, i found that alot of people experienced similar problems with them, Being delays and mouse failure. Even with fresh batteries and all. The products werent meant to be used long term(2-3 years) for extensive use...
    I dont know about you but i thinki paid 100 bucks for the pair so thats only 25 bucks a year... Which is kinda silly considering i coulda got a better one that wont cough up on me.
    If anyone reading this finds a good wireless keyboard that doesnt delay, and a mouth that doesnt delay...(my biggest concern). Please mention it. i am very interested in.

  • Hp laserjet 1022 = this printer is not supported under windows 7 shares?

    hp laserjet 1022 => this printer is not supported under windows 7 shares?

    Yes I understand, but this printer is not installed on a network share. Always remain sown printing in the print queue. Consequently, I ask if you can type HP 1022 printer in Windows 7 share?

  • Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    Just got iPhone 5, get home and find iCloud Outlook Add-in does not install under Windows XP.  I am loathe to upgrade to Windows Vista/7/8 just yet.  Can I obtain and use an earlier version of iCloud Outlook Add-in?  My iPad II synchronizes!

    There is no 'earlier' version that supports XP. iCloud launched with Vista/7 support only.

  • MSI UBO-30 External Slim Bluray Drive not recognized under Windows 8.1

    Hi, does anyone here have MSI UBO-30? It is an external bluray drive from MSI. For some reason the drive is not recognized under windows 8.1 64 bit (it just says USB device not recognized). But works fine if plugged into Windows 7 machine. Anyone encounter the same issue? 

    Try upgrading your usb 3.0 drivers on your system. That worked with My GS70 Stealth Pro...

  • Wifi not working under windows 8.1 with Bootcamp

    Hi, I have installed windows 8.1 under bootcamp. it seems to work fine however the wifi connaction is not existing under windows. therefore i can only connect via ethernet. Anyone an idea how to solve it? Thx

    Hey there,
    I don't know if it's still interesting for you, but I've had the exact same issues. The only solution, as far as there is no official change from Apple, you can install Windows 8.0 via Bootcamp with official drivers for Bootcamp (wifi works great) and then install the upgrade to 8.1 as Windows still uses the former installed drivers from Win 8 on 8.1 as well.
    Hope that helped, 8.1 runs even better on my MB Air than Mac OS 10.9 :/

  • Exit button not functioning in MSS Team - Recruiting - Create new Candidate

    Hello Experts,
    Exit button not functioning in MSS Team - Recruiting - Create new Candidate Assessment iview
    Location of exit button :Create new Candidate Assessment iview we have next button when we click on we can see exit button in next iview
    any idea why it not functioning / help on this / or is it a bug from SAP
    Thanks,
    Regards
    Vijay

    Hi Krishore,
    Thanks for reply,
    The version of BP_ERP5ESS is 1.0 SP8 and The version of SAP_ESS is  600 SP8.
    do need to add extra patch for this.
    please help me on this issue. 
    Thanks,
    Regards
    Vijai

  • I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either.

    I'm using Windows Illustrator CS4, and i cant find the artboard menu pallate. Its not showing under Window Dropdown menu either. How can i locate it or toggle it to turn on again?

    I'm not sure what artboard view is, sorting and naming artboards is not available in CS4 either, sorting however is possible via script workaround,
    Introducing: re Arrange Artboards v2 Script

  • Frame 7.2 will not install under Windows 7 Ultimate

    HELP: FrameMake2 7.2 does not install under Windows 7. Almost at the end of the install it crashes with an empty dialogbox and a warning. Nothing else.
    Any one seen this,
    Keep smiling
    Thomas

    For more info on running things in compatibility mode, these links should help:
    http://windows.microsoft.com/en-us/windows-vista/Make-older-programs-run-in-this-version-o f-Windows
    http://www.sevenforums.com/tutorials/316-compatibility-mode.html
    There's also a free "XP" add-on that runs apps in a virtual mode with Win7. See:
    http://www.microsoft.com/windows/virtual-pc/download.aspx
    There's also another freebie virtual-machine that will allow you to run most older apps available at:
    http://www.virtualbox.org/

  • AC97 onboard sound DOES NOT WORK under Windows 2000

    Just an FYI, the AC97 Audio on your MSI mainboard will not work under Windows 2000, for which the AC97 hardware is not certified. If you try to use it, your audio output will be intermittant at best and will crash your audio applications at worst. A maddening and disheartening problem for people like me who didn't realize the problem existed and spent many hours trying to getting it to go away.

    hiya -
    I am have this trouble as well!
    Are you useing professional, or Advaced server?
    I have done EVERY kind of update... so dice.
    *sniff *

  • Lynx K3011 volume and Win8 Button no function in Windows 8

    Hi, I just got my brand-new Lynx tablet and have installed all Windows 8 updates. Everything works fine, exept the "Volume" and "Win8 Home" Button are without function. Do I have to install additional drivers? In the device Manager everything looks fine. I dont think that it is a hardware issue.
    Thanks for your help!
    Patrick. 

    I recently found this information on the micorsoft troubleshooting website and thought of your post, not sure if you had found a solution but hopefully it is helpful.
    My keyboard volume controls suddenly stopped working
    If the volume controls on your keyboard stops working, check the Human Interface Device Access service on your computer to make sure it is set to Automatic.
    In the Start menu, type View local services.
    From the Search Results list, select View local services.
    In the Services dialog box, locate Human Interface Device Access. Make sure the status is set to “Started.”  If it is not started, click Start the service.
    Right-click Human Interface Device Access and select Properties.
    On the General tab, in the Startup type, select Automatic, and then click OK.
    Thank you for being a part of the Lenovo Family,
    Catie
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Donate KUDOS and Click "Accepted Solution"

  • Presario CQ 71 - Built in Webcam not detected under Windows 7 Profession​al - No HP-101 device

    I have a Compaq Presario CQ 71 EB400. On this notebook I run both Windows 7 Home Premium 64-bits and  Windows  7 Professional 64-bits to compare behaviour of apps and windows features in both  environments.
    Windows 7 Home on  my  HD C partition
    Windows 7 Professional  on my HD F partition.
    The CQ 71 has a built in Webcam, that shows up under Windows 7 Home premium Device Manager - Imaging Devices  (Cameras and Scanners)  as HP-101, linked to the required drivers.
    Under Windows 7 Home premium:
    - The built-in CQ 71 Webcam is detected and operational - the HP-101 entry is present in Device Manager. 
    - Applications using a Webcam like Skype, Mycam, Manycom etc connect with the Webcam
    - When I  plug in an external Webcam,  thet webcam is detected as well, drivers loaded etc.
    Under Windows 7 Professional:
    - The built in Webcam is not detected, in the Device Manager -Imaging Devices, the HP-101 Webcam entry is absent
    - Skype, Mycam, Manycam cannot find a  Webcam (also not when an external USB Webcam is plugged in)
    - A plugged in external Web cam is not detected as an imaging device.
    I use a Brother printer/scanner/fax machine,  the Brother scanner device is visible as Imaging device in Device manager in both Windows 7 Home premium and Windows 7 Professional.
    Other USB devices, portable disks, card readers etc seem to work OK in both Windows 7 environments.
    The HP support pages provide information what to do when a internal Webcam is not detected; The recommended actions make no difference.  Going back to a  previous W7 Prof restore point is no option,  as on the CQ 71 notebook the built-in Webcam  never functioned under W7 Professional.
    The major difference is that all Windows 7 Home Premium relatede system software resides on the C partition, all Windows 7 Professional system software on the F partition.
    I'm looking for a way to kickstart the built in CQ 71 Webcam under Windows 7 Professional installed  on a non-standard partition.
    Your suggestions will be very welcome.
    Jan Dijckmeester.

    Hi again jdij,
    It is good to hear back from you!
    To enable your system to detect the Webcam in Windows 7, I recommend re-installing the original drivers and software that first came with your computer. This can be done by following the steps in this document on Using Recovery Manager to Restore Software and Drivers (Windows 7). To update the newly installed software, please follow this resource on Using HP Support Assistant (Windows 7).
    If the webcam is still not detected, I recommend returning your system back to a previous restore point. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 7).
    Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 7), as well as Performing an HP system recovery (Windows 7). This should return your system back to factory defaults.
    If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Macbook pro (early 2008): Trackpad not working under Windows XP

    My Trackpad worked regularly under Windows (Bootcamp) and Mac OSx until some months ago my Motherboard had to be exchanged because of a fault function of the graphics card. When I started Macintosh after the Macbook pro was repaired the Trackpad worked regularly, but under windows the mouse didn't react to moving the finger or clicking. I reinstalled the drivers, but this didn't fix the problem.
    What shall i do now? Thank you for any advices.

    since my mac is year and two months old (funny, two months and you are screwed).
    Not if you had of purchased Apple Care.  You would have been covered for 3 years.
    What I would like to say to the Apple:
    This is not the place as Apple does not come to these forums. 
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding.  Not even sure if they "lurk."
    "Say" it here -
    Product Feedback

  • PSE 11- FX and Graphics buttons not working under Expert Editor Mode

    Under 'FX' in Expert Editor mode, the Filters, Styles and Effects tabs do not work, and similarly under "Graphics" the shapes and text tabs do not work. I have looked at C:\Programmes\Adobe\Photoshop Elements 11\Plug-Ins\Panels and find the 'Panels' folder is empty, which suggests this is a possible cause?? EDitor and Organiser are otherwise (at long last after Organiser faults rectified) now working fine. PSE 11 is running under Windows XP Service Pack 3. Any suggestions please ??

    Thank you Jon; I see what you mean about creating an FX layer and by double clicking I can bring up the adjustments. Problem is when I go into Expert Editor mode, at the bottom right side of screen are five 'buttons' - Layers, Effects, Graphics, Favourites and More. When I click Layers, I get the Layers Pane up on right hand side and it works fine as I can create different layers etc, however when I press 'FX' I bring up a plain grey panel with three headings at the top of it; Filters, Styles and Effects - these do absolutely nothing, even if I am working on an FX layer and I am guessing something has gone missing or been corrupted.
    The 'Graphics' button now works (I told it to search Windows>Graphics, which I read in another post)

Maybe you are looking for