X61 tablet scrollpoint buttons

I let Windows 7 update the driver for the Scrollpoint device, but the center button is not working correctly. It used to select a "new tab" when used to click on a link. Now it is ignored.
I looked at the offered device drivers on this list but did not recognize one as being for the scrollpoint.
Can anyone direct me to the solution?
Thanks for any hekp.

There's a beta driver for Windows 7. However it's not working for me either. I'm using Win7 64bit.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA#tbx61

Similar Messages

X61 Tablet buttons not functioning under Windows 7

I have an X61 tablet, and I have noticed that the tablet buttons don't work. I installed the Tablet Button driver for Vista, and I'm not sure what else (if anything?) I need to install in order to fix the problem...
Any advice?
Thanks!
mod edit: split into new thread. title edited accordingly.
Message Edited by erik on 05-22-2009 08:23 PM

There's a beta driver for Windows 7. However it's not working for me either. I'm using Win7 64bit.
http://www-307.ibm.com/pc/support/site.wss/document.do?sitestyle=lenovo&lndocid=WIN7-BETA#tbx61

X61 Tablet stops responding to pen

Greetings, all!
I have an X61 Tablet 7767-02U (call it X61 A) that is barely three weeks old. Was working wonderfully until yesterday. When in tablet mode, it will not respond to the stylus (pen) input. Stylus from a second, identical X61 does not work on X61 A. Both stylus pens work on X61 A when not in the tablet mode. Both pens work in all modes on tablet # 2 (call it X61 B). What could have happened to the X61 A, the first tablet?
Pen works when in laptop mode, not in tablet mode. I know it is not the stylus pen, as the stylus pen works on the twin X61 tablet. I removed the WACOM driver from the device list, rebooted, and the driver was back, but still no joy. Ideas?
Thanks in advance!!

I have an update. I haven't found out anything new from Lenovo or Wacom, but I've been tinkering around, observing what happens.
The pen/stylus still freezes once in a while, and I've have not been able to find a "direct" means to "reenabling" it, i.e., I haven't found an explicit source for the problem such as a bad driver, or some button I can do to make the pen/stylus and the laptop start to interact with each other again.
However, (interestingly enough), if I place my note book in "sleep mode," and/or "suspend," then bring it back the pen/stylus relationship is rebuilt/reconnected and it works fine. I've tried this several times when it freezes and it works consistently.
With a little more information about a) Wacom / Pen relationship b) the Wacom / Pen relationship to the notebook c) the "sleep mode / suspend" operation, we could start to piece together what the cause is.
That is to say, what happens when the laptop is placed into sleep mode, vs what happens when it is brought out of sleep, i.e., what operations does the laptop re-initialize when it wakes up?
The bad news is all of this, although, ultimately knowable, is probably too tecnical and/or would just take too much time to figure out. Someone at Lenovo / Wacom, who is more technical, will ulitimately have to figure it out and fix it. :-)
All and all, I'm happy it is still working, apparently some people's stylus just totally stops working.
Thanks again for the update.
man qua man

Help! Lenovo x61 Tablet Prompted Message on device installation

Hello! I own a x61 Tablet laptop and I just upgraded my hard drive from 120GB to 300GB. I installed Windows Vista Ultimate 32bit and everything installed fine. But now I get this message box everytime I start my pc or restart:
Device Software Installation
Windows will now finish installing software from the manufacturer of this device:
ThinkPad Tablet Keyboard and Buttons
Then I have a choice:
Finish installing software(recommended)
Ask me again later
I choose Finish installing and I still get the prompt everytime I start my computer.
Does anyone have this problem? Any help would be greatly appreciated.
Edit: Nevermind this it has been solved. All I had to do was install all the software(even the unwanted ones) for the Tablet Keyboard and Buttons and it stopped prompting. Sorry guys.
Message Edited by junya8971 on 05-07-2009 07:24 PM

In Control Panel select Tablet PC Settings. Select the Other tab and the last option on the page is Tablet PC Input Panel Options. There you should see a link to Go to Input Panel Settings. I think the selections you want appear on the Opening tab.
I could not find a more direct path to it, but perhaps someone else might simplify it.

X61 Tablet is suddenly dead

I was using a Thinkpad X61 tablet for several years. A few days ago, I found the tablet cannot be turned on. I can hear some small noise when I use battery to boot it. This noise sounds like comes from the battery and the mothboard maybe. It is not the sound of the fan. While switching to the AC supplied mode, the noise is disappeared. I tried many times to power the computer on, but it cannot be turned on.
I have been experiencing such a wired problem before, but I resumed the computer successfully by pressing and releasing the power button for many times without a battery/AC power before with power supply. But now I forget how to manipulate in details and failed to power the computer on after many trials.
Hopefully, I can get a solution here. Thanks for your attention.
Best wishes,
Xiaodong
Solved!
Go to Solution.

Hello i2000s,
I'm glad to see that akinvic solved your problem.
Another thing to when a laptop will not power on or if it is unresponsive and won't power off is to remove the power cord and the battery, then hold the power button and count slowly to 10. This is the power reset for a computer.
Sometimes when a computer has one of the problems listed above, the computer has power stored in its body. The power reset releases any excess power trapped in the laptop.
Hope this helps,
Alex
Was this or another post on the forum helpful? Click the star on the left side of the screen to give kudos! Did someone solve the problem you encountered? Click Solution Provided to let us know!
What we Do in Life will Echo through Eternity. -Maximus Aurelius

X61 tablet (7767-59u) audio not working

Audio stopped working on x61 tablet. Uninstalled sound max in device mgr and reinstalled driver but still no sound.
Any suggestions. Device mgr states device is functioning.
Thanks
Solved!
Go to Solution.

Turn off the mute button on the bezel!!!
Solved...

X61 Tablet with Windows 8 - no tablet function

Hi I have just updated an old laptop with Windows 8 (Microsoft has a great offer right now = it is only a great offer if it works ;-) )
The PC is a: Lenovo ThinkPad X61 tablet 7767.
But I am having issues with the tablet interface. Windows 8 has been designed to tablets...
With the virgin installation, the tablet interface does not respond.
The tablet is found in the Device Manager:
+ Human Interface Devices
HDI-compliant device (3 lines)
Wacom Penable Dual Touch
All control programs are in place, calibration program can be opened, but there is no response from the tablet (pen or touch). I have looked at the lenovo support site, and downloaded various drivers, most with no effect, others caused windows blue screen - which in windows 8 is more light-blue greenish.
I have also Installed ISD_DualTouch_710-9 from Wacom.eu, this gives the most positive result.
Both pen and touch works (no dual touch), but is unaligned (when in a corner, pointer is 2cm from corner x and y. center of screen is aligned)
I cannot calibrate, neither pen nor touch. Running tabcal (from control pannel or commandline) gives 4 popup windows with error messages:
1) Failet to enumerate the installed digitiser devices.
2) No suitable hardware was found to calibrate.\nWindows supports calibrating only integrated digitisers.
3) Invalid display was specified.The Device manager lists the tablet as working:
+ Human Interface Devices
HID-compliant device
Wacom Device
I have tried to find a file holding the calibration; I found a ISDTablet.xml, that looked right, but editing it has no effect and rebooting resets to original value. (The file has a calibration section with coordinates of 4 points)
Secondary, I can't get the buttons on the tablet to work (Ctrl-Alt-Del, Rotate, Toolbox, Esc and cursor joystick).
Any ideas are greatly apreciated ;-)
Casper
Solved!
Go to Solution.

check this topic

Any suggestions on creating a new user account please? (thinpad x61 tablet, Vista Business edition)

I would appreciate any suggestions on creating/editing the user account on my second-hand thinkpad X61 tablet (running Vista Business) edition. I bought the laptop from ebay in Germany/Austria. When I switched it on, there were no options to create or edit a username. I have completed all the updates (Lenavo and Windows). I tried the following to add a new administrative account:
1, Control Panel then selecting User Accounts. A screen appears for a second and then disappears.
2. I have also tried typing in sysdm.cpl in the command prompt,
None of the above worked, as the screen does not appear at all. I have also tried allowing the automatic updates on, that does not work either. I was wondering if this is managed by the Think Vantage system. Not sure if this is relevant, the Vista Business language was set in German and I added a language pack via Vistalizator to turn it into English.
Any help with this issue would be appreciated. Many thanks in advance.

Hello,
Have you tried running the Local Users and Groups Manager (filename: LUSRMGR.MSC) to create a new user? If so, were you able to create additional accounts through it?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Can't run XP sp3 on x61 tablet - BSOD during installation

I'm trying to install XP pro sp3 on my X61 tablet, but every time I try I get a BSOD with a 0x0000007B error. I've tried everything
I can think of:
1) changing the BIOS sata mode from ACHI <--> compatibility
2) copying an installation of XP in a virtual machine to the HDD (gave me the same BSOD)
3) f6 to insert ICH8M SATA drivers during the XP setup process
4) slipstreaming ICH8M SATA drivers into XP setup using nlite
I run win 7 on this machine perfectly (it came with vista, which is on the recovery partition). Also, I'm installing XP from an iso on a thumb drive using the multiboot iso from pendrivelinux (it's grub). I don't have a CD drive I can use with this machine.
I'm using the latest 1.24 bios.
Here are somethings I haven't tried:
1) installing the drivers for x61 into a virtual machine then copying the virtual disk to the real disk.
2) using a real CDROM
3) buying the lenovo xp recovery disks (they want $80, which seems an awful lot to me). However the support people told me there was no guarantee that would work either.
Has anyone got any ideas?
Solved!
Go to Solution.

The chipset is intel santa rosa (GM965 I think). I already had it enable in the bios when installing.
Anyway I just found this: http://www-307.ibm.com/pc/support/site.wss/MIGR-69819.html
It says that putting the sata into compatibility mode should fix the problem...but it doesn't
So Lenovo's recommendation doesn't work.

TPM Module / X61 Tablet / Window 7 and Bitlocker

I am sure my laptop has a TPM - at least the device manager shows it and says it is working - I try to turn on Bitlocker by right-clicking on the drive and it tells me I dont have a suitable TPM module installed...
Anyone come across this or do I not have a module installed.????
Sorry but I am confused...also note this drive has only a single partition..none of this service partition stuff..
Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7

make sure you get the right cable. There are 4 choices. They come with or without support for fingerprint reader and with connections for 2 different digitizers. Most, but not all, X61 tablets have G5 digitizers, but some have G4. Try seeing if the leg to the digitizer has just come unplugged. I hafe seen it happen when the cable is stressed from a bad hinge.

X61 Tablet - Wacom Code 10 - Cannot use Pen

I recently got my X61 tablet back from the shop after having some warranty work done (replaced hard drive) and now I can no longer use my pen or any of the other tablet features. Lenovo sent me recovery disks and they did not help. I tried downloading the most recent drivers and I am still getting Wacom Code 10 - cannot load driver software. What can I do? The support people recommended sending in my tablet for more work but considering the fact that I was unable to get anywhere with the support people after four hours of messing around I have a feeling that they have no idea what is going on.
Any advice would be appreciated. Thanks.

check this topic

[solved] Extra Thinkpad tablet hardware buttons not recognised

Hi there,
I am having a Thinkpad X200T which comes with additional tablet hardware buttons, such as for rotation.
However, these buttons are not recognised. I just checked it with 'xev'. They do not generate a click event.
Does anyone know how to enable these buttons?
All information I have found so far was on the ThinkWiki which says that you have to map these scancodes to keycodes. However, I am wondering if there is no other way to directly enable them, such as by a module to be loaded.
The buttons I am talking about are shown here: http://www.thinkwiki.org/wiki/File:X41_ … uttons.JPG
Thanks!
Last edited by orschiro (2013-06-26 06:39:55)

Does the GNOME shortcuts manager conflict with setkeycodes and xbindkeys? Can it set the buttons you mention itself? I just can't grasp your reasoning; you may as well say "I have to send a package from London to New York by tomorrow morning, but I don't want to use air freight because I favor the train system." If your favored solution doesn't work (or doesn't even exist), then relying on it is foolish. I can understand that you might want some kind of "Pure GNOME environment" solution, but there very well might not be one.

X61 Tablet - Do ALL the XP Drivers exist for it?

Well I made the mistake of taking an X61 (which i love) with Vista Business (Which I hate/loathe etc) and I am seeing all the kinds of problems I hoped not to...applications restarting (Word/Excel) when shut down , Wireless connectivity incredibly flaky (limited connectivity for no apparent reason - reboot and it's working..XP machine sitting next to the Vista one just smiles as it carries on surfing the Internet).
Sooo I am going to downgade to XP on it...
One question though..I can see that most of the drivers are there under XP but are they ALL available..can someone confirm that? I worry I install XP only to find , say , the tablet itself not working or the fingerprint reader or the sound etc etc..
Sure some of you must have done this?
Thanks
Lenovo X200 Tablet / 350Gb HDD / 4GB RAM / Windows 7
Solved!
Go to Solution.

Yes, they do. I just built a X61 tablet image for my company earlier this week.
In order for the tablet components to work though you need the Tablet PC Edition of XP and you have to start with a base install of XP Pro with service pack 2 (if you start with service pack 3 there are issues with the on-screen keyboard and a few other things). The XP install is normal and when asked for a product key you need to provide one for the Tablet PC Edition. Then, during the install you will be asked for the disk with the tablet components.

X61 tablet install of simpletap

I installed simple tap on my windows-7 powered x61 tablet. I think it's a good start. I particularly enjoyed using the volume and brightness sliders. I added a tile of my own no problem.It' be nice if simple tap had tiles for all the lenovo goodies on my machine such as rescue and recovery, airbag protection, etc.
My biggest fear is that my x61 with single-touch gets forgotten in the multi-touch world. That would be a shame because a single-touch interface is one that'll work well with an ordinary mouse too.
What I'd really like though is a nice touch based windows shell. Origami was getting there I think, but I can't run it in windows 7. It seems the best touch interface we've got at the moment is windows media centre with a few extensions added in. I've even tried the x86 version of android and wasn't too impressed. Touch friendly apps seem to be a fair way off yet

Hi Robert
I got a X61 pen enabled tablet ...
I looked around but -beiing a newbie- I couldn't find what I wanted to know:
Does your remark about simpletab apply to a pen enabled X61 as well ?
(I cannot multitouch, can I ?)
What is Origami ? Where can I find it ?
(and yes I know where/how to fold paper ;-)
Regards

X61 Tablet sxga multi touch upgrade

Hi everyone,
Just picked up a X61 Tablet. I actually have 3, got them all on Ebay for $25.00. I have rebuilt 2 of them with the 3rd unit acting as a donor unit for parts. One unit has the sxga 1400 x 1050 screen, (very nice screen!).
I have been reading how the digitizer just peels off of the back of the screen and can be placed on to a new screen. i currently have 3 digitizer backings with the following numbers:
su5e-12s05as-01x
su5e-12s05as-02x
su5e-12s05as-04x
I have been searching to find out if any of these are the multitouch digitizers, but haven't found any information.
Does anyone know if it is possible to switch any of these backings to get multi touch on the sxga?
Thanks
zog

No, there's no "list" per se.
My understanding is that -101 screen won't work for the mod, and that you need -100 which was used in X60T.
There was someone in the UK building these cables and selling them on eBay. No idea on the pricing or quality, though.
Good luck.
Cheers,
George
In daily use: R60F, R500F, T61, T410
Collecting dust: T60
Enjoying retirement: A31p, T42p,
Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

X61 tablet scrollpoint buttons

Similar Messages

Maybe you are looking for