X61 Thinkpad. Inserting power cable Stops Sound coming through the Jack Port

A very confusing Situation has arisen for me with my new(ish) x61 Thinkpad. When I connect power to the device Audio stops coming through my external speakers plugged into the microphone jack, And instead plays on the onboard speakers. It will remain like this until I disconnect power.
I have no idea what has caused this and sofar all my Google searching hasn't Given me any relevant information, So any idea's or solutions you may have are greatly welcome and appreciated.

That doesn't appear to be a US model, and this is the forums for Toshiba USA. You may want to contact Toshiba in your region. If it's a European model, you could check the Toshiba Europe forums.
- Peter

Similar Messages

Any way at all to STOP sounds coming through bluetooth?

Whoever designed this should be strung up...
Is there any way to STOP sounds coming through my bluetooth headset? It is so incredibly distracting when I'm on a call and the stupid calendar goes off, I hear an email come in, a text message, etc.
I have an iPhone 4 and Plantronics Voyager Pro.
I know one way is to turn on the mute switch on my iPhone, but I don't want to do that like 8 million times a day.
I'd simply like to NOT hear everything ringing in my ear when I'm trying to have a simple conversation.
Anyone?

I'm assuming you have an A2DP compatible headset. If so, see if you can disable A2DP on the headset. You can do so on the Jawbone Icon, not sure about others.
To my knowledge, there is no way to disable A2DP on the iphone itself.

Mac mini running Plex and no sound coming through the amp.

I've got a Mac mini OS X 10.6.8 and I downloaded the Plex program to play movies and tv shows. I can't get any sound through the amp while watching through Plex. The Mac mini and amp are connected via HDMI cable and I know it's been set up right because I can run iTunes through the amp with no problems.
Anyone have a solution to get sound through the amp?
Cheers

For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao.

How to unbundling binary structure coming through the serial port

Hi to all
I have a board that is transmitting a binary stream. This stream is a structure repeated constantly ... the payload of this structure looks like this
I have no problem reading the serial port and disaplying ASCII data but this is not my application.
ANALOG_COUNT is (2)
typedef struct
uint16_t light;
float TempAmbient;
float TempTarget;
uint16_t ADC[ANALOG_COUNT];
int16_t AccX;
int16_t AccY;
int16_t AccZ;
}StreamContext_t
The idea is for me to, once I get the 20 bytes that comprise the strcture I want to brake it into its elements to feed it to graphs or what ever.
Thanks
Alejandro
Solved!
Go to Solution.

You are still making life to difficult. Try this. It is much simpler to understand and it will work correctly. Ok, there may be some debugging.
There are only two ways to tell somebody thanks: Kudos and Marked Solutions
Unofficial Forum Rules and Guidelines
Attachments:
Start.vi ‏18 KB

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver. I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. thanks

How can I play music on my macbook pro (OSX Lion) through a Pioneer receiver? I've connected them with a mini display port to HDMI cable with audio support bought at the Apple Store, but there's no sound coming through. There are 4 HDMI-in ports on the receiver - BD, DVD, DVR/BDR and audio. In my system preferences for sound, the receiver doesn't show up as an output option. Can anyone please advise. (ps, this is my first time posting a question, so I hope I can find your answers!) thanks, JP downunder

For sound, try the audio output port and connecting to the RCA audio input ports on your Pioneer receiver. Use something like this:
http://eshop.macsales.com/item/OWC/PODCONNECTOR/
Ciao.

Sound coming from headphone jack becomes heavily distorted at the slightest movement of the headphone cable.

I use headphones almost exclusively of my Macbook Pro (Early 2011, way out of warranty) so this has really been annoying me. For about 1-2 weeks now whenever the wire from the headphones I have plugged in to the jack moves, even slightly, the sound coming from the left side disappears almost entirely while the sound from the right side becomes quiet and filled with static. Strangely, it doesn't appear to happen with everything that I'm doing on my computer. For example when playing games the sound seems to work just fine for the most part, but playing music or watching Netflix causes issues whenever the cord moves, which is really annoying.
To get it to stop, I have to move wiggle the plug around in the jack and slowly move the cord into a place where it will not be affected by movement very easily. I read that some people have been able to get around this by buying an external sound card and using the headphone jack on there, but I'd rather not do that if possible as there isn't really anywhere that I can put it without most likely picking up some interference. Plus I only have two USB ports, so I have to use a powered USB hub thats about 2-3 feet away from my computer for most things. Anyone know if this is a viable solution or how much it would cost to fix at the Apple Store?

Also, I have tried restarting my computer, messing with the audio settings, and various other settings that I thought might help.

I put a case on my iPod touch 5 and now there is no sound coming from the speaker. The head phones work though. I called Apple Support and the 2 people I spoke with seemed baffled. Has this happened to anyone and how do I resolve this?

I put a Griffin case on my daughter's iPod Touch 5 and now there is no sound coming from the speaker. There is sound when we use the headphones. Is there a mute function that I may have switched on and if so how do I turn it off?
It was a gift bought by her Godparents in January and I live in the islands so I can't just drive it back to the store to have them look @ it!
Called Apple Support and spoke to 2 people who seemed baffled and who could only suggest I reset the device. Who h has not helped.
HELP!!!!!!!

- Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so.
Try the following to rule out a software problem
- Reset the iPod. Nothing will be lost
Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup
- Restore to factory settings/new iPod.
- Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
Apple Retail Store - Genius Bar
Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
Apple - iPod Repair price
A third-party place like the following will replace the jack for less. Google for more.
iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
Replace the jack yourself
iPod Touch Repair – iFixit

My sound coming from the internet on my MacBook Air is not working!

I bought this MacBook Air a month ago is the new one, everything was working well but suddenly the sound coming from the internet stop working.
My computer sound is working perfectly is just when I want to watch a video or listed a song from youtube talk on skype isnt working at all.
When I press the volume button i can hear it.
Can someone tell me what can it be?

Hopefully one of these steps should solve the problem.
1. System Preference > Sound > Output > Internal Speakers
    Highlight Internal Speakers / Headphones
    Make sure Mute is not enabled.
2. Remove the headphone.
    If you see red light in the headphone port, plug the headphone
    in and out of the port 5 or 6 times to flip the microswitch inside.
    Sound output may be stuck in the digital mode.
3. Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
4. Applications > Utilities > Audio MIDI Setup
    Audio Devices window
    Side Bar
    Click the Built-in Output.
    Under Mute any of the boxes checked? If so, uncheck it.

Mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

mba sound: just bought my first mba and I have been using it in my house no problem...took it to my empty office today and I can hear a small vibration/sound coming from the upper left part of the keyboard...constant and rhythmical...ideas?

Hi
It's likely your fan, It always runs on a MBA. Mine is very quiet, others report some noise - here is one link. There are lots of others.
Hope this helps
Cheers
https://discussions.apple.com/thread/4381367?start=0&tstart=0

Every time I scroll, there's a clicking sound coming from the top left corner of my macbook

Similar to the clicking sound of my hard drive, every time I scroll, or whenever there is any sort of animation on my screen, there's a similar clicking sound coming from the top left corner on my , around the area where the microphone is. I know the hard drive is at the bottom right corner, so is this a graphics card issue or am I overlooking the issue?

It is better to take the MBP to the Apple store for evaluation.
They have the diagnostic tools to make sure that there is no problem with the computer.

Morese Code sound coming through my external speakers

Recently I've been getting Morse Code sounds coming through my external speakers. It's not all the time but at least 2-3 time a day. Any idea?

If I have my cel phone near my iMac, every now and then I get a sound that could be described as Morse code like. It has no lasting effects, so I don't worry much about it.

There is no sound coming through speakers i phone 4s can anyone help

there is no sound coming through speakers i phone 4s can anyone help

Check the ring/silent switch on the left side of the phone, above the volume buttons.

Iphone 5 sound is only coming through the earbuds

iphon e 5 sound is only coming through the earbuds

On the top left hand side is the silent switch on or off?

Little to no sound coming through headphones

i have 2 new iPhone 6's one has very little sound coming thru the headphones they work fine on the other phone. The jack don't seem to messed up fits prefect and clicks in tight

Howdy JJGO11,
Welcome to Apple Support Communities.
From what I gather, you have an iPhone 6 that has a low or muffled sound from the EarPods, and the EarPods work fine with another device. The article linked below provides a lot of great information and troubleshooting tips that should help you resolve the issue.
If you hear low or muffled sound from your Apple EarPods - Apple Support
So long,
-Jason

Sound coming through speakers

Hi all,
I just got a PC with Windows 7, home 64bit and have added CIT200 to it. All works well with one exception, the sound comes through the speakers instead of through the phone. The phone seems to work but what can I do to make the sound come through the earpiece?
Thanks for any help you can offer.
Phil

Are you sure you have installed the software and drivers.
USB devices such as what you describe often need drivers or software for Windows to recognize it, and the features they have - i.e sending sound to headset at the push of a button.
It's common in the OS installs to forget such things, so I'd like you to rule this out first.
I guess the driver for the CIT200 is not compatible with Windows7..So try to run the setup in a WindowsXP compatibility mode.

X61 Thinkpad. Inserting power cable Stops Sound coming through the Jack Port

Similar Messages

Maybe you are looking for