X7 headset is not recognized after Belle update

Hi,
afters Belle update my original headset is not recognized by Nokia X7, can't listen to music or radio. The icon is not visible.
Headset is 100% ok, I tried it on different phone and works fine.
After hard reset is starts working but after unplugged and plugged one again it is still not working. Another hard reset didn't help.
Also tried accessories settings in settings menu - changing profiles and other setting - didn't help.
Any ideas?
Regards

Same problem here too.
Updated to Belle and tried to listen to my music using the original nokia x7 headsets and the music plays only from the speakers too. Tried the headsets on my brother's nokia x7 updated to belle too and they worked fine. Others headsets also didnt work in my nokia x7 but they did in my brother's. I tried to reinstall Belle, restore orinigal settings several times and it didn't work.
Think i just gonna have to sent my phone to the SAT

Similar Messages

Headset does not work after latest update...

It is very "strange" that since the latest system update on my Z3 compact my headset is not working at all. I use my all time favourite iphone 4 headset. It worked flawlessly before the update but now if I plug it in, the phone is not recognizing it at all and the walkman still plays on the phone speakers. Before the update I could listen to music, use it for making calls and so on. Since the update, nothing is working. My headset is working fibe by the way, so it is not a hardware fault. Works like a charm with other phones, and on the top of that if I use the app Soundabout the music works with the headset but the calls are still not using my headset. Do not tell me to use the sony headset which was in the package because I hate it. Has poor audio quality, falling out of my ears constantly and the cable is everything but not flexible. So it is a shame that I need to use an app to get my headset work on my new phone...

I understand you don't want to use the bundled headset, however for troubleshooting purposes can you please test it and let us know if it works.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

Built-In iSight NOT RECOGNIZED after EFI Update 1.1

After updating to EFI 1.1 on my iMac 20 Inch (2,16Ghz) the built-in iSight-Cam is not
working anymore. It´s not showing up in the system profiler > USB Devices.
I bought the iMac last week, switched it on, the cam took a picture on the user account creation,
I applied the EFI-Update and OSX 10.4.8. After that the cam was gone.
I tried everything from resetting SMC, PRAM to reinstalling Combo-Update 10.4.8 ... NOTHING helped !
Any ideas or solutions ???
P.S.: Sorry for my crappy English, I´m writing from Germany !

Here´s a report from MacFixIt.com about this problem:
http://www.macfixit.com/article.php?story=20061211231332862
Built-in iSight not recognized Some users have reported loss of their built-in iSights after applying the iMac EFI Firmware Update 1.1. In some cases, this issue can be resolved by resetting the SMC (system management controller) using this process:
1. From the Apple menu, choose Shut Down (or if the computer is not responding, hold the power button until it turns off).
2. Unplug all cables from the computer, including the power cord and any display cables.
3. Wait at least 15 seconds.
4. Plug the power cord back in, making sure the power button is not being pressed at the time. Then reconnect your keyboard and mouse to the computer.
5. Press the power button on the back to start up your computer.
Resetting PRAM can solve a variety of issues As mentioned in our coverage of recent EFI Firmware updates issued for other Macs, a number of potentially serious issues apparent after applying this EFI Firmware Update can be resolved by simply resetting PRAM/NVRAM via the following process:
Shut down your Mac, then start it back up while immediately holding the following keys: Command, Option, P and R. Hold the keys down until the computer restarts and you hear the startup sound for the third time.
This workaround is a good first course of action before exploring more complex fixes. It should also be attempted if your system cannot properly startup after applying the update.

2nd cd/dvd drive not recognized after security update 2014-002

I have a 3rd party CD/DVD drive as my 2nd drive in my Mac Pro and after installing security update 2014-002 it is not recognized by the computer. It does not even show up under "About This Mac" or as a drive in disk utility. Worked fine up until this update. Any ideas?
Thanks

I think I have solved my own problem. After 'restarting' the computer several times with no effect I turned the computer off and let it set for 15 minutes, not that I think the time period had anything to do with it, but upon turning the computer back on the 2nd CD worked fine. I'm sure you folks who are wizards in this can explain why turning the computer off did what restarting did not.

Nokia C7 GPS not working after belle update!

Hi everyone, i had a C7, working great till i updated it with symbian belle.
okay here is what i did.
-my GPS was working on symbian anna with maps version 3.06beta
-i updated the phone to symbian belle from symbian anna.
-installed nokia maps 3.06 beta, and replaced the one that came with the update because it had the option of route planning which the installed map did not.
-this was the first time i checked to see if the GPS was working after the update, and it did not work even after i stood in an open field for half an hour.
-i learned that the latest update of nokia maps in fact had route planning, so i used the nokia PC suite to reset the phone software, and then later updated everything that was listed in the software update app.
-my GPS could still not work after i stood in the same damn field for another half an hour.
-now it will just give approximate positions based on the wireless networks, and not give any accurate position, so i cant use it for navigation anymore.
-i tried running the gpsinfoqt app, and it keeps saying searching for a signal, but it never finds one!
Please help me!! if there is any way i could flash the C7 or run a diagnostic or something so atleast i figure what is wrong!

Hi akkudub,
Welcome to Nokia discussions board!
Have you used Nokia Suite for the update?
I advise you to follow the steps below in order to get your GPS fully working again:
1) Uninstall the current version of Nokia Suite that you have.
2) Clean the registry with a registry cleaner.
3) On your PC, go to Start > Run and type %temp% and click on "Run". Delete all Nokia folders from the folder that opens.
4) Download the newest Beta version of Nokia Suite from this link:
http://betalabs.nokia.com/apps/nokia-suite-beta
You will need to sign in to your Nokia account - the same credentials used to log into this forum.
We will appreciate your feedback once you have tried this program!
Once Nokia Suite is installed, please connect your device to it and perform the available updates if any is available. Alternatively please reinstall the current software. Also, click on the Maps tab and download the relevant maps files (Europe, UK etc...)
Let us know how you get on and feel free to post any other questions you may have.
Regards,
astra2025
Press the 'Accept Solution' icon if I have solved your problem, Kudos my post if my advice has helped you!

DVD drive not recognized after Security update

Hello -
Well, for whatever reason I decided to apply some Apple software updates today. I repaired permissions, did a back up to an external Firewire drive with SuperDuper and downloaded several packages - iDVD 6.0.2, iMovie 6.0.2, Quicktime 7.1, iPhoto 6.0.3, iWeb 1.1, and Security Update 2006-003. I installed the Security Update and rebooted. I had read about an issue with DVDs, so promptly inserted a DVD-R disc of mine with a movie on it (not a commercial DVD, footage I had shot on my own). It was not recognized. I restarted with the mouse button held, no luck. I repaired permissions, no change.
I restarted from the backup on the external drive and cloned the backup over to my Powerbook. The problem did not go away, there the DVD sits, unrecognized. Tried to see if DVD player would see the DVD, got a message "There was an initialization error. A valid DVD drive could not be found [-70012]" disc burning in System profiler says no burning device was found. Tried to re-install DVD player via 4.6.1 update, got a message "Compatible DVD hardware was not detected, installation will not proceed".
Where to next? I haven't booted into open firmware to try to eject the disk that way, but one post on the discussions here somewhere had no luck. I'd really rather not erase and re-install and migrate from my back-up, but if that is all that's left, ok. Thanks for your help.
BTW, 10.4.6 ona 1.5 GHz Al PowerBook with 2GB RAM, not original RAM but Samsung from OWC. Thanks again.

Well, one thing I had not tried was to reset PRAM//NVRAM. I combined that step with shutting down, unplugging the power cord and letting it sit for 15 minutes. Reconnected power, restarted while holding cmd-option-P-R through the second start-up chime, and viola, my DVD appears on the desktop, the drive is listing in the system profiler, problem gone. Thanks all for the rapid responses.
Darth

Software update app not working after belle update...

After updating my N8 to nokia belle, I can no longer use the software update application. It will not connect to the net and just keeps on saying "connection failed (connection unavailable)" eventhough everything else (nokia browser, store, email, opera, maps etc) is connected. After failing to connect it gives the message : unable to check for updates, please try later.
Is there any suggestion I can apply to fix this situation?

@Analyst
What sort of reaction do you get using Nokia Suite > Options > software updates?
Happy to have helped forum with a Support Ratio = 42.5

Wi-fi is not working after belle update on c7

i updated my phone to symbian belle, since then my wifi is not working, it dosent get connented, i tried everything hard reset, reinstalled firmware,..etc but nothing worked, evrytime i had to restart my phone to get it working, after restart wifi works for sometime initially but later problem bounces back again..it always show "connection unavailable connection failed" where as rest of my devices are working totally fine with wifi....is nokia going to do something about it..now thats a issue of masses..

News from Nokia posted by Flavio :
"Hi Flavio
Since our last interaction we have gathered a bit more information on the subject.
The error appears because of a corrupted file in backup, in section "Phone and application settings" (english key icon in back up process section, where you can choose which data to save. Do not include this part in backup).
To solve this,
- you do need to make a hard reset (*#7370# ),
- then re-install Nokia Belle with the Nokia Suite and restore back up, except that part (meaning a backup without Phone and applications settings included).
It should solve the issue.
If the error remains, it's necessary to make a Deep Reset ( phone switched off, press low volume, camera and menu keys, then switch on phone maintaing hold on those keys until phone starts) before reinstall Belle and restore back up as i say before.
Hope this helps.
Best Regards
Nokia Care"
Hope it works for you...
Regards

C7 Camera not working after Belle update

Hi,
I updated my C7 from Anna to Belle yesterday and now the camera gives this error message:
"Unexpected error occured. Please restart the camera. If this does not help, try restarting the phone"
I did all of the following:
1. Restart phone -> no change
2. Factory reset -> no change
3. Reinstall Belle -> no change
Camera with Anna firmware worked fine and the software prior to that.
Anyone know what's wrong?

1.First backup all your data.
2. Switch off your phone.
3. Press volume down button, camera button, menu button simultaneously.
4. While keeping above buttons pressed, press power button and keep all these four buttons pressed till your phone restarts.
It is possible that you may lose many of your apps. Check software update menu of your phone whether you have any updates available and install them.
In Love With My C6-01:Now running on Nokia Belle!

WRT160NL Usb storage not recognized after firmware update

Hi.
I've been using an AC powered hard disk in my router for a long time, until i found the new firmware (Ver.1.0.04 Build 2), but after the upgrade the storage didn't work any more. (i don't remember the firmware version it had)
In the storage tab, in the configuration page i can see the disk, i can create sharings but these are not found in the windows network. (i'm using windows 7)
the disk has been tested using FAT32 and NTFS (232.8GB)
do you have a solution for this problem? or should i return to the firmware version it had (the one i don't remember)...
is there another version to switch to?
thanks for your help...
Solved!
Go to Solution.

Please kudo my post for if it solved your issue.
Please remember to Kudo those that help you.
Linksys
Communities Technical Support

Logitech trackball not recognized after 10.5.8 update- LCC 3.1 needed

Logitech Trackman wireless trackball was not recognized after 10.5.8 upgrade. At re-boot, the "searching for bluetooth mouse" screen appeared, pushing the re-set button on the wireless base and trackball did not solve the problem.
Had to plug in my Apple mouse (worked immediately), go to the Logitech website and download the latest Logitech Control Center software for Snow Leopard, dated 9/22/09 (version 3.1)
After install and re-start, Logitech hardware worked perfectly, as before.
Not sure if it would avoid this issue, but I recommend installing LCC 3.1 before you install the 10.5.8 update. That or be sure you have an Apple mouse on hand.

aaron08544 wrote:
Turns out the 10.5.8 update is missing a very important file which is
/usr/X11/lib/X11/fonts/misc/fonts.alias
After I copied one from my Centos 5.2 box, things are finally back to normal.
-Aaron
I have that file on my system and x11 was updated using 10.5.8 combo update. it works just fine.

Messaging Not Working Fine After Belle Update

My C7 has issues after Belle update when any incomeing new message in inbox then i read message from the inbox after i read the message then toush the back botton the message is delete in the inbox automaticaly.....i cannot recover this message...!
plzz help me to solve this problem.......?

If the update does not work for you then do as I explained in my previous post and roll back to the previous driver. That philosophy can be applied to all updates.
If there is no pressing or emergent reason to update and your PC or notebook is running just great... don't update. (that is especially true when it comes to a BIOS update)
For your issue #2, the problem could be your wireless connection (hotspot, router or modem) that causes the dropped connection.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

My ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

my ipod touch gen 4 will not recovery after software update. have tried everything. device not recognized by itunes. any ideas?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

HT202274 Password change old password not recognized after 10.9.5 upgrade

God bless you, peace.
macbook pro 2012 user password not recognized after 10.9.4 too 10.9.5 upgrade plus tech work at apple.
I want to change user password, it is allowing me to get into user account and admin account on computer but I recently changed it for the tech work to be done. I would like to put the password back now to old password or a new one but... The few days old new password pre update and pre tech work is not being accepted to allow me to change to another password.
recent update, after 10.9.4 to 10.9.5 update and apple tech work done.
1. Tech work replaced optical drive,
2. 10.9.4 to 10.9.5 upgrade left computer endlessly booting up, then got into finder window tried to read backup drive and screen went to black curser and could not backup information as techs decided may need to be done before I left it with them.
3. Also track pad was not (is not again) selecting text to drag unless real hard press and then only intermittently would select text or just drop the selection (not hold the selected text after a long scroll select, did work at first after tech work but back to not working). It is still not responding easily when pressed, but it is much better, as they did something with software they said. Today While typing this I am trying to select words misspelled and it does not select them unless I press not as hard it is becoming the same as before I see now, sometimes less pressure is needed but more than should be used.
I noticed today after tech work The Spell check is not responding with a two finger tap on the red underlined misspelled words without multiple try's with two finger tap. The curser moves around after selecting words also, or when selecting words so hard the curser moves to another place not on the desired words or check box. The curser arrow tip should select the word but it does not recognize unless I put the tail of the arrow onto the word then it recognizes the misspelled word for spell check on two finger gesture.
It looks like I need to take it back, I tried to call and check to confirm if the track pad intermittently and curser adjustment was serviced. In order to verify I had called three times to get that information to no avail. endless looped in the phone que, one would answer take info and then forward me to a endless loop dial ing phone that never was picked up, supposedly at the Bay street store tech section. Phone voice mail from apple support status on the repair, ...Juliano from Bay Street Apple repair store Emeryville, ca left a voice message... just generically said optical drive replacement is successfulI, I noticed right away three items were to be addressed but only the optical drive was mentioned, so I called three times to try and verify the other problems. One whole minute just to select this text and copy it to notes for a backup. It would not select at first, then after selected it would not copy it, then it would not paste to notes, it paste the last cut and paste I did 10 minutes ago.
I do not have a easy excellent wifi connection for my wifi only phone and would prefer email or chat for repair help. apple Repair No: R142180337

Try running the combo update. It fixes more files/data than the App Store upgrade.
10.9.2

Problem setting up email after Belle update

Hi, I was having this problem that after Belle update I could not receive emails after set up.
My email is with eircom.net and phone is with Vodafone Ireland. It is working afet I tried these settings.
Set your own email address, user name and password.
Try this settings:
Incoming server: webmail.eircom.net ( use your own, this in mine with eircom.net)
access point: internet
NB: security: OFF
Port: default
APOP secure login: OFF
outgoing server: For vodafone it is mail.vodafone.ie (Ireland)
Access point: internet
Security: OFF
port:default
Hope these help....

Problem solved. The ipad default is set to IMAP. When I changed it to a POP server, problem solved.

X7 headset is not recognized after Belle update

Similar Messages

Maybe you are looking for