X87-GD65 Motherboard won't let me overclock my 4770k.

Hi, I have an issue with my recently purchased Z87-GD65. Basically, it's not giving me the options to overclock or change voltages in the BIOS. The "CPU Ratio Mode" setting is missing, and the "CPU Ratio" and CPU Voltage settings are locked down, I can't change them (notice the lack of brackets around Auto). Here are pictures detailing what I mean:
EDIT: OK apparently I had to use +/- on numpad instead of clicking stuff like I'm used to with other UEFI motherboards.

Quote from: badboy2k on 08-November-14, 10:24:26
have you pressed the + and - on your keyboards numpad on them?
Aaaaaand I'm a retard.
Solved.

Similar Messages

  • Sneak Peek of MSI's Z77A-GD65 Motherboard :)

    Here is a quick sneak peek of MSI's Z77A-GD65 motherboard. The board is intended for the upcoming Ivybridge 22nm processor which I think will be out this end of April. CPU socket is based on LGA 1155, so current Sandybridge Processors such as 2600k, 2500, 2300, etc… are still compatible. Other than this, the chipset natively supports USB 3.0 and PCI Express GEN3 lanes which can do both NVIDIA SLI and AMD CrossFireX. Running one video card is at x16, two at x8/x8 and three at x8/x4/x4.
    With the release of MSI X79 motherboards a month ago. MSI introduced Military Class III Components. This consists of Solid Capacitors, Super Ferrite Chokes (better overclocking and power stability), Hi-C Caps and DrMOS II (higher power efficiency, double thermal protection). All these components have passed the MIL-STD-810G Standards giving the best durability, efficiency and overclock on MSI motherboards.
    Moving on, here is the Z77 of MSI looks like. Black and Blue color themed motherboard and I pretty like what they have done with the heatsinks. The layout is clean and finally they moved the OC Genie, Reset and Power buttons on the upper right portion of the board. Much accessible especially when you are in a TRI-SLI video card configuration.
    Some basic information on MSI Z77A-GD65:
    •Memory Support – 4x DDR3 DIMMs Support DDR3 2667/2400/2133/1866/1600/1333/1066 DRAM 32GB Max
    •LAN – 10/100/1000 Fast Ethernet by Intel 82579V
    •Audio – Integrated HD Audio Codec by Realtek ALC898. 8-Channel audio with jack sensing. Compliant with Azalia 1.0 Spec
    •SATA – 4x SATA 6GB/s Ports (SATA 1-2 Intel Z77 / SATA 7-8 ASMedia ASM1061), 4x SATA 3Gb/s ports (SATA 3-6 Intel Z77)
    •RAID – SATA 1-6 Support Intel Rapid Storage Technology (0/1/5/10)
    •USB 3.0 – 2x USB 3.0 Rear I/O by intel Z77 / 1x USB 3.0 Internal Connector by Intel Z77
    Rear IO Ports
    •1x PS/2 Keyboard/Mouse Port
    •1x Clear CMOS Button
    •1x Coaxial SPDIF-out Port
    •1x Optical SPDIF-out Port
    •4x USB 2.0 Ports
    •2x USB 3.0 Ports
    •1x LAN Port
    •6x Audio Ports
    •1x HDMI port
    •1xDVI-D Port
    •1x VGA Port
    Let’s check out the lower portion of the board. Just below the South Chipset Heatsink. You will find the Debug LED Code and beside it is the MULTI Bios Switch.
    The white SATA ports on the right side are the one being controlled by the Intel Z77 Chipset while on the other side are by ASMedia. You will also find the USB 3.0 L-Type Oriented Header for better cable management.
    Bundled Accessories
    •1x Certificate of Quality and Stability
    •1x Manual and Software Application Guide
    •1x Drivers & Utilities DVD (Winki III)
    •1xSLI Bridge
    •1xEasyConnector Header Guide
    •1xIO Back Panel Plate
    •4x SATA 6GB/s Cables
    •1xV-Check Cables
    I was able to test the motherboard using an Intel Core i7 2600K. Well it seems for me that the Z77 is more better in overclocking compared than the previous P67 and Z68 MSI models. Voltages are quite accurate too. It wasn’t hard for me reaching a 4.8GHz overclock on the said motherboard.
    Below are two benchmark results using MSI Z77A-GD65 and the 2600k.
    So that’s it for my share Hope you liked it guys

    Quote from: xmad on 30-November-12, 09:49:07
    I wouldn't get too tied up in benchmarking unless that is what you are going to be doing with your computer.  The -gd65 is MSI's 3rd best z77 motherboard, but it is also a bit older and has more bugs worked out.
    One big strike against the gd65 is it's lack of a true hardware switch for it's multi bios. The -gd80 and mpower both have multi bios's with a true hardware switch, this come in very handy if you like to tinker and end up flashing bios allot or overclocking often where a corrupted bios is a possibility.
    Just out of curiosity, what are the first and second best ?
    So you say you never had issue of slow sata transfers ?

  • My capture screen is black won't let me capture cs5 premiere help

    I'm farely new to premiere pro cs5, im trying to capture a dv tape from a deck and ive used it before but now it seems that its black screen when i pull up the capture tool, im able to fast forward and play and stop (deck control) but it just wont give me a picture. i have an external preview monitor (client monitor) and it shows the picture form the tape on there but on the capture tool there is nothing. Ive looked at the preferances and settings and it seems like everything is good but still nothing. what am i doing wrong?

    Hi,
    Are you trying to capute via Firewire?   If so, this may help you:
    Try replacing the 1394 driver with the Legacy driver that comes with Windows 7.
    Below is the step by step instructions on how to install the Legacy driver.  This fixes caputer problems with Premiere.
    Click Start
    Then click on Control Panel
    Click on Device Manager
    Note: If you don’t see Device Manager listed, click on View By: Category on the top right side of the
         Control Panel Window.
         Then Click on Large Icons
         You should now have a list of items in the Control Panel and click on Device Manager.
    Under the Device Manager, look down the list for IEEE 1394 Bus Host Controllers and Double Click on it.
    It should display something like - 1394 OHCI Compliant Host Controller
       Note: If it has the word (Legacy) behind it, you are already setup and you can just exit out.
    Next, double click on the 1394 OHCI Compliant Host Controller
    A window will popup saying 1394 OHCI Compliant Host Controller Properties
    Click on the Driver Tab
    Then look down in the widow and click on Update Driver
    Then select - Browse my computer for driver software
    Next select - Let me pick from a list of device drivers on my computer
    It will bring up a list of drivers.
    Click on 1394 OHCI Compliant Host Controller (Legacy)
        NOTE: It is important that you select the one with (Legacy) after it, just like shown above.
    Then click Next
    Once it installs the 1394 OHCI Compliant Host Controller (Legacy),
    it will say Windows has successfully updated your driver software.
    Click on the Close button and exit out of all of the other windows.
    Then Reboot your computer.
    You will now be able to import video via the Firewire port on your computer.
    If you are still having a problem importing video after you have switched the Firewire driver to Legacy, then the problem may be with the Firewire port.  This is a common problem.  The Firewire port will work with an external driver, but it won't let you import video from your video camera.  Most people report this problem with Dell computer, but it does happen with other brands, even brand new computers.  This problem is usually with the Firewire port that is built into the motherboard.
    The fix is simple:
    1.  Install a Firewire card into one of the open slots in the computer
    2.  Using the instructions above, set the drive to Legacy.
    3.  Reboot the computer.
    4.  Then connect the Firewire cable from the video camera, into the new Firewire port that you just added.
    This fixes the problem 99% of the time.  Firewire cards are not the expensive, they run from $10 and up, depending on any extra features the card may have.
    NOTE:  We have noticed that when Microsoft has issued certain updates, it can cause Windows 7 to switch back to use the original 1394 OHCI Compliant Host Controller driver.  If you notice the Firewire device is transferring slowly again just repeat the above steps and reinstall the Legacy driver.
    Hope this helps. 
    Dave

  • Board dosent let me overclock

    this board wont let me overclock..
    when i try to i get no signale from my monitor.. i was having a horible time tryng to get my OS runing because of this and when i finally called msi the guy said just to load the optimimized settings.. when i did i would get a signal from my monitor. later on in the day i went in my bios and the only thing i changed was overclocking my CPU. and i got no signal to the monitor again.

    read this post plz:
    https://forum-en.msi.com/index.php?threadid=51994&sid=
    Q: I changed some stuff in bios, and now it wont post/boot what do I do?
    A. You will need to clear cmos by using the jumper [JBAT1] on your motherboard: (its between the bios chip and the battery)
    1. turn of the pc, unplug the cord to be safe
    2. locate the JBAT1 jumper
    3. move the jumper from pins 1-2 to pins 2-3
    4. wait 30secs
    5. move the jumper back to pins 1-2
    6. plug in powercord and power on the pc, you should now be able to post
    NEVER short pins 2-3 while the pc is powered, it will very likely damage your motherboard!
    goodluck

  • X79A-GD65(8D) won't boot/enter BIOS

    Hi, just got my new board and after rebuilding, it won't let me enter BIOS . POST seems to finish, i see the graphic, then the screen goes blank with a flashing cursor top right of screen.
    specs as follows
    X79A-GD65(8D) board
    32gb Corsair ram (8x4gb)
    Gigabyte t560TI
    Seaget 2TB and 1TB HDD's
    i7-3820 proccessor
    Cant find out what the BIOS verion is
    I have stripped it right back to 1 stick of ram and one HDD, no change.  Have completely dismantled and checked all connectors.   
    All help gratefully appreciated, this is/was my main work PC and i'm stuck badly without it.

    I'm thinking the UEFI/BIOS version may be the problem. Early production mainboards may have been shipped with v1.0 or v1.2. To support the CPU you have, v1.4 is required.
    Added: Standard USB keyboard and mouse? Initial startup should be with minimum components, not 8 sticks of RAM and all the HDD's. Makes it hard to troubleshoot if there is a problem. With just the one stick in the primary dimm slot, power off, pull the PSU power cord, remove the battery for awhile, clear CMOS and see if you can get into the UEFI/BIOS when tapping the Delete key. Was there a code number in the bottom right of the screen also?
    Quote
    how do I update the bios?
    Do you have a bootable USB stick? Try the CMOS clear first.

  • P67A-GD65 Motherboard PS/2 connector problem

    A few months ago I picked up the P67A-GD65 Motherboard and it worked just fine. One day I turned it on and found that the keyboard wasn't working anymore, not a single button functioned and the power light was off, however the USB/wireless mouse I have was still working while plugged into the back of the keyboard. Unplugging the keyboard from the PS/2 slot, and having only the USB connector to the motherboard, suddenly the keyboard would work fine. I've used two other keyboards, of different models, in the PS/2 and have the exact problem with both of them. I've been using it like this for about 2 weeks now, and every once in a while randomly the keyboard won't function when I turn on the computer, but the mouse still does, until I reach back and unplug the USB connector and plug it back in..and then poof it works fine again, which is rather annoying and confusing.   
    What could be causing this problem, is there a way to fix it myself?    The motherboard came with 3 years warranty, however their return policy makes is so I have to ship it to them, and they will ship it back repaired/or new, which could take a week or longer. I work off my computer and even a few days of being without it would be bad for me, and the reason I bought this motherboard is because my old one is fried, so I don't have a spare to plug in temporarily.

    Souns like a faulty PS/2 connector rma or just using USB seems to be the only option.

  • My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already

    My flash flayer does not work on my Windows 8 Surface Tablet, it also won't let me see if i already have it installed...

    1.      Are you getting any error message?
    2.      Which browser are you using?
    3.      Were there any recent changes made on the computer prior to the issue?

  • HT1751 I need to uninstall and reinstall iTunes (it won't let me update). So, how do I copy or back up my iTunes library of over 1,500 songs? Can I use a Flash Drive to do so?

    I need to uninstall and reinstall iTunes (it won't let me update). I have IE 8 on Windows XP, and iTunes 10 something. In my Program files list I see iTunes and iTunes (2) and even iPod and iPod (2) where a tech had to back up and do this for me before. I'm just trying to fix it all. I keep getting the "The feature you are trying to use is on a network resource that is unavailable. Click OK to try again, or enter an alternate path to a folder containing the installation package 'iTunes.msi' in the box below." I can even run a search and find the folder, but it gives me the same error message. I was planning on using the Microsoft Fix-It tool  to help uninstall then Reinstall iTunes. But I need to backup my library. So, how do I copy or back up my iTunes library of over 1,500 songs? Can I copy the folder to desktop or can I use a Flash Drive to backup my music? I don't want to do anything until I know for sure how I can backup my songs, and then reinstall them into iTunes. Thanks for any help.

    Ok, thanks that helps. I don't have an external hard drive though. What about backing up through 'the cloud'? I'm just wondering since my husband syncs his iPod to the PC through iTunes and he's worried that he will lose all the songs on his iPod if the library is lost from iTunes and he tries to 'sync' it up again. I'm not exactly sure how to  'copy the entire iTunes folder' either. I kinda suck at this unless I have step by step instructions, which I haven't found yet on iTunes help or other sources.
    The only way I know how to back anything up is by going back to a restore point, etc. (as stated before, we don't have an external hard drive.)
    Thanks for the info.

  • I bought Aperature and PS from a university store, not under my apple username, now it won't let me update it to work with Yosemite because it isn't hooked to my username.  how do i fix it and get the upgrade

    A few years ago or so i bought Aperture and Photoshop (the whole kit and caboodle) from a university subsidized store (my husband worked there and buying programs like those two, the whole Microsoft office Suite, all kinds of things) at a very significant discount, i think we paid 25$ for Photoshop vs the 400$ it was selling for on the open market. 
    Yesterday i upgraded most of my laptops to Yosemite (one of them I'm sure was the one that had Aperture on it, a 17in MacBookPro, its about 2 years old now, but at the time i bought it it was the highest computer apple had on the regular floor, I'm sure i could have added some stuff to customize it for extra, but basically we are talking top of the line computer.  I recently just required a 2012 MackBook Air with also fairly heavy specs from a family member that was upgrading (I'm not sure why, i know they couldn't possibly be using this thing for anything beyond its capacity, its basically new,  and they aren't 3D animation rendering and needed a "quicker" one).
    I was very happy with the upgrade, and now it does work much more seamlessly with my iPads and my iPhone, but the whole reason i uploaded it was to work on pictures, adjust them, change the size and then print them out to include in jewelry, and Yosemite won't let me use Aperture at all, when i click to upgrade it (in the bar all it has basically old icon with a (no sign or ghost busters like sign over it) i click on it and it says, you did not buy this with your apple account name and i could not upgrade it.  But it just made me click ok, and did not give me any info on how to upgrade it.  i do physically own it, or my husband does, I'm not sure to whom it is registered, but sholdnt i still make it able to work with this new operating system, even if not through regular "software updates"  it used to always be asking me to upgrade "word" and i got that in the same way, so what is the issue and what do i do to get it to work on this new system?

    Wow that was really quick, thank you so much.  Im not sure at all which version it was because i said it was around 4 years ago he bought it.  I know it isn't under his username, since he's a PC person (ugh) so i know its probably registered to one of our actual names.  isn't there some way to look it up since we did register it, because I'm not even sure where the disks are from when we bought it (we've moved a lot and also have two storage lockers, i know i would have kept it with other disks) but my cd rom drive is actually broken on my computer as well ( i think it got stepped on and is now squished and won't eject or run disks.)
    So is there anyway they can look up that its registered to one of our names since we did register it when we bought and installed it, or do i really have to find the disk with some sort of proof of purchase (i know there would be no receipt after all this time)
    either way, ill do what you suggested to the best of my abilities and thank you so much for answering my questions, i can't even open the program as its incompatible and find out the info from that) so I'm in a bit of a pickle and your response was so thorough and it didn't seem to be posted long enough to even write a well researched response, thanks, all the best,
    sarucia

  • My friend wanted to create a new iCloud account that was different to  her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now

    My friend wanted to create a new iCloud account that was different to  her iTunes and app one when she deleted her iCloud account that was the same as her iTunes it won't let her log into her iTunes one now what can I do to fix it she has paid or apps and songs and of she makes another account everything will be lost.
    Need help please :) thanks

    Ah thanks Razmee however there is NO option to delete the iCloud account in settings!

  • HP Officejet Pro 8500 A909a won't let computer boot up

    I have an Officejet Pro 8500 A909a series connected to my HP computer running Windows XP Home. It was
    working perfectly. Now it won't let the computer boot while it's connected to the computer. I can unplug the 
    USB cable from the computer and it boots fine. I can then plug the USB back in and the printer prints fine. I 
    ruled out bad USB ports as everything else USB works fine in the same ports. I put a brand new cable on and
    had same results. I rebooted the printer and computer, with same results. I uninstalled the printer and drivers and
    reintsalled with same results. Computer freezes at the screen where it askes you to use the up and down arrows
    to select OS or wait for it to count down to 0. With printer unplugged it boots perfectly. This just started about 
    4 days ago. New printer. HP Support was at a loss when I did the live chat. Can anyone help?
    Message Edited by ComSource on 06-15-2009 07:14 AM

    Hi,
    The problem seems to lie in the installer, which has an unusual bad behaviour.  The installer puts the 8500 a909a in the list of USB  bootable devices.  (Not good!!!)
    When the printer is disconnected it isn't a problem.  When the printer is connected the computer tries to boot from the printer and the computer hangs.
    When I found the printer in the BIOS list of USB bootable devices I DISABLED that item in that list. Then it booted normally.
    But now the BIOS takes an extra 30 seconds or so but boot up seems to be preceeding normally.
    The guys on the CHAT and PHONE lines didn't even imagine the installer might be a problem so their advice was useless. They were blaming the computer.  More importanly, they didn't have a way to escalate the problem. They  had no capacity to respond in a flexible manner. It was like dealing with unhelpful staff in the county clerk's office.

  • I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    I'm trying to add a playlist manually to my iPhone 4. It won't let me because it's trying to delete all of the music currently on my iPhone. Is there any way to prevent this from happening in order to start manually updating it?

    Are you leaving the box unchecked to Manually manage music & videos? You don't need to to add anything to the iPhone.
    Simply drag the playlist to the iPhone to manually add it.

  • HT3529 My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?

    jengrz wrote:
    My friend switched his phone number from an iPhone to a Blackberry. My phone still wants to use iMessage to send him a text and won't let me send it as a text unless I turn off iMessage on my phone. Is there a fix for this?
    TechCrunch posted a solution today that applies to this problem, I think.
    Go to: https://supportprofile.apple.com/MySupportProfile.do
    Click your old iPhone and "unregister" it.
    More info here:
    http://m.techcrunch.com/2012/01/05/i...d=tc_home_art&

  • My creative cloud update installation froze at 6% and won't let me do anything. How do I fix this?

    When I tried to update the entire Creative Cloud, it began updating and then froze at 6%. Now it is stuck and won't let me quit or do anything to get out of it. What should I do?

    Jmills702 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to reinstall the Creative Cloud Desktop application?

  • I have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number

    i have the adobe cloud 9.99/ month photography package i downloaded lightroom 5.4, it told me it was a trial version, and i'm now at the end of the trial and it won't let me download the full version and i don't have a serial number. also, when i click buy, i get an error message saying, "application not found."

    There are two different LR’s, one with a serial-number licensing and one with a CC-signin license.
    You should uninstall the serial-number LR you have installed, then
    Quit the CC Desktop application,
    Restart the CC Desktop application—this will rescan what you have installed and not see LR,
    LR will now be on the CC Desktiop apps list, so install that.

Maybe you are looking for

  • Why do my files not add up to used disk capacity?

    OS 10.3.x, G4 powermac. Main disk This is not a small difference ( block usage, 1024 vs 1000 bytes etc) I have a hard disk, capacity ~35GB If i add up the folders, its roughly 18-19 GB It shows 28.8 GB used, 7 GB free Huh? I have launched tinkertool

  • JSF 2 on SAP CE 7.11

    Hello, I'm trying to deploy a JSF 2.0 application on my SAP WAS CE 7.11. I've not found so much document explaining clearly what is the JSF supported version of CE 7.11(if someone can tell me it would be great). I'm getting exception when trying to d

  • FM: BAPI_MATERIAL_BOM_GROUP_CREATE inquiries?

    My inquiries as bleow: 1. This function is create BOM group or can be create BOM? 2. If my requirement include BOM 'Create', BOM 'Change' and BOM 'Delete', this function can be to do these three requirement? 3. We use 'AFS' and this function support

  • Error message in BSC

    Hi,    I am trying to build the balance scorecard through the BSC wizard and under measure directory I get the "No Formula Defined" message.    I check the measures in measure builder, under the definition tab,the formula has been define.   Is there

  • Alt Codes

    Hi All I seem to have a problem using normal ASCII alt codes with swing. I think I get the unicode equivalent when I enter them. Please tell me if there is anything that I can do to change them back to ASCII since it would be ridiculous for me to exp