X99S Gaming 7 - Windows ME driver wont load

OS: Windows 7
Motherboard: X99S Gaming 7 (H.40 BIOS)
First Issue --------------
MSI motherboard installation CD includes drivers such as the Windows ME driver which is required by the Included APP "MSI Gaming App" to run, but the driver will not load. I have installed it 3 times, rebooted, and still the MSI Gaming App says it is required when i try to run it. Also Live Update 6 reports that driver as not installed each time even though it installs it. Any Ideas?
Second Issue ----------
MSI Live Update 6 reports that a newer verison of the BIOS is out, I have version H.40 and the new version is like H.480, i tell MSI Live Update to install it, it reports its installed, i reboot, and it says I still have H.40. Any Ideas?

Don't use Live Update for updates. Download and install drivers manually: http://www.msi.com/support/mb/X99S-GAMING-7.html#down-driver&Win7 64
Download bios manually also: http://www.msi.com/support/mb/X99S-GAMING-7.html#down-bios
For flashing use MFlash (included in your mainboard's bios).
Quote from: cyberellan on 23-December-14, 19:52:15

Similar Messages

My palm life drive wont load

Hi all and thanks in advance for any help recently my palm life drive has stopped loading i turned it off one night and in the morning i turned it on but it got stuck on the palm logo and wont go any further ive tried everything i can think of ive tried hard resetting and soft and both have the same result it gets stuck even when left plugged in throughout the process any help or advice and anyone know how much a repair costs?
Post relates to: LifeDrive

i was afraid of that, but i cant work out what i did wrong :/ i always ejected the drive, i used it earlier today and transfered 30GB worth of files and it worked, then i had it in my pocket and went out.. came back and when i tried to use it again after a few hours it just did not want to work and i tried everything..
i guess ill just have to go buy a new 64GB one this time lol ad be extra careful

Dvd drive wont load disk

I can't put a disc into the DVD drive. Is there a reset-type procedure I can use to make it willing to load discs?

This issue may require some qualified technician to replace the optical
drive; depending on the usage and age of the computer, the unit may
be wearing out or some part in there has failed. And depending on the
age and use pattern of the computer, the hard disk drive may also be
getting weak. {Sometimes, for a little more than the cost of one service
replacement, a second can be performed at the same time.}
If the problem is just some foreign object which somehow got into
the drive, perhaps a good service tech could look inside & see it;
maybe even remove some obstruction, if one exists in there.
Otherwise, the options are probably limited due to the way the drives
are compact and generally the computer would need to be opened
up to get into them. Some independent service techs and small
companies who know Apple products can do a good service and be
able to restore functions. Some may be able to give you a fair price
because they have access to the parts and are knowledgeable, too.
The iBook series takes some effort and skill to get into them and do
repairs, and not cause other damages as a result of this effort. My
suggestion would be to inquire locally, if at all available or likely, for
someone qualified; then inquire farther away. I had a good service
from wegenermedia.com on my older iBook at a good price; and
sent it across the continent via the US Post Office. A flat-rate box
with bubble-wrap & other padding may be adequate...
Estimates are subject to inspection in many cases, and at times,
a part may be prohibitively expensive if the tech or company is
not one who does this work often. wegenermedia is a specialist;
there probably are a few others who do portable Apple repairs in
out-of-warranty computers, to factory qualified specification.
Good luck in this matter, & happy computing!

HT1925 windows 64 installer wont load on 8

Is anyone else having trouble downloading iTunes to windows 8. The installer downloads then wont open. Suggestions?

The installer downloads then wont open.
Are you getting an error message when you try to run the installer? If so, what does it say? (Precise text, please.)

My cd drive wont load a game

I just bought football manager 2012 but for some reason when I put the disk in nothing happens for about 2 minuets then it say's “I have inserted a black CD”. I thought it might be the CD drive but I put an audio CD in and that worked fine, I checked what specification is needed to run the game and that’s all fine. Not got a clue why it’s not working, any help?

I am sure thatyou have already tried to clean the dvd and the optical drive lens.
1. Reset SMC. http://support.apple.com/kb/HT3964
Choose the method for:
"Resetting SMC on portables with a battery you should not remove on your own".
2. Reset PRAM. http://support.apple.com/kb/PH4405
If these steps do not help, contact Apple.

Disc Drive wont Load Leopard DVD

Got round to buying Leopard this week and inserted the disc only for my Macbook to make some rumbling noises and eject the disc. I was wondering if there are any solutions to my problem or if anyone else with a Macbook is suffering from this problem.
Thanks in advance, Scott.

I am having the same problem with a replacement MBP 2.4GHZ which arrived today from Apple. I have a Leopard family pack which has no problems on 3 other macs. The Leopard "CPU Drop-in DVD" from the DOA computer and this replacement are all summarily spit out by this MBP??? No dirt or scratches involved. This computer has passed an extended Apple Hardware test. Will let you know what Apple Care has to say. After falling victim to the unresponsive keyboard issue on the first MBP, I am not a happy camper to say the least.

Hp deskjet 1010 wont load on windows vista

driver wont load for deskjet 1010 on windows vista

The full solution software includes everything you need to install and use your HP printer. This collection of software includes the complete set of drivers, installer and optional software.File name: DJ1010_188.exe Alternately, The HP Printer Install Wizard for Windows was created to help Windows 7, Windows 8/8.1, and Windows 10 users download and install the latest and most appropriate HP software solution for their HP Printer.
Simply run the tool and follow the on-screen instructions.
File name: HPPIW.exe

Wont load OSX after downloading 10.4.10 pop up

Apparently this is a very common problem and not under warranty. I found the perfect forum for this but then lost it so here's my own...
Basically when i turn on my ibook it gets to the OSX window and sinply wont load. I have to take the battery out to turn it off! Should i try starting up in target mode? should i try reinstalling OSX? My local mac dealer says lots of others have the same problem and its not under warranty. Does anyone else know of anything that could work and save us all a few quid?
thanks anyone who can help

try running as administrator -- a temp solution for me anyway. Waiting for apple to fix whatever this is. At least one other poster here had same problem and "solution" worked for him as well.

Wont load on windows 8

wont load on windows 8

What won't load on Windows 8? To help troubleshoot we'll need the following system information:
Operating   system
Browser
Flash   Player version
When reporting issues with video or audio, it's also helpful to get your system hardware and driver details. Instructions for finding this information can be found here:
Windows
Finally, sometimes video and audio problems are caused at a lower level and not directly related to Flash Player. I recommend trying both of the links below to see how they perform. If the problem exists with both, then Flash Player is most likely not the culprit as the HTML5 video link does not use Flash Player when playing. You can verify the use of HTML5 by right clicking the HTML5 video and looking for the words "About HTML5" at the bottom of the context menu.
HTML5   video
Non-HTML5 video

MSI x99 Gaming 7 Crashing during Windows UEFI Boot

Hello everyone,
I'm dealing with a strange problem here and i cannot seem to find any solution. Yesterday i updated my m/b bios from H.8 to H.9 and everything worked fine but 30 minutes later during some regular windows and drivers updates i restarted the machine only to find it crashing during windows loading logo when booting. I initially thought to be something about the new bios update (or windows/drivers updates) so i switched to the back-up bios ,updated it to H.8 (which i was using before) and did a quick format but the problem still occurs.
I pinpointed the problem to be something in the bios (bios update resets settings to defaults both when i updated to H.9 for the main bios & H.8 for the backup bios) and the UEFI settings for windows 8.1 since it doesn't occur when i disable the "Windows 8/8.1 Feature". What exactly does this feature do? The only difference i saw was the loading logo , now i see MSI red/black picture with the small circle-dots loading instead of a Black screen with white MSI logo if i enable the feature.
My system is new (three months old) and i never had any crash or lock-up anywhere (nor it is overclocked). All settings in the bios are default except the "Boot Mode Select" is UEFI and the "MSI Fast boot" is enabled. Windows 8.1 64Bit are installed in UEFI mode.
-MSI X99 Gaming 7
-Intel I7 5820k + Corsair H110
-G.Skill Ripjaws DDR4 16GB
-Gigabyte 970 G1 Gaming SLI
-Samsung 850 Pro 256GB
-EVGA SuperNOVA 1000 G2

Ok ,seem to have some updates:
First of all i was wrong about the SATA ports i was using (my second GPU blocks the view of the ports).
- SSD was connected to SATA3 while the other two HDD's to SATA10 & 9
I first disabled Samsung RAPID mode (you never know). Then i changed the SSD from SATA3 to SATA1 port and didn't connected the other 2HDD's at all. Enabled the "Windwos 8/8.1 feature" & Secure Boot and quickly did 4-5 restarts from the bios and from Windows, even a cold boot. No crashes but i need to do more reboots to make sure it doesn't occur any more. Then i will connect the other two HDD's and check for crashes.
Update#1 . Ok my other two HDD's are connected to SATA ports 3 & 4. After 3-4 restarts & 2 cold boots everything seems fine , no crashes at all. I don't know if maybe after 10 restarts it will occur but i'm confident enough that it should already be present now. So it seems that either Samsung Rapid Mode is responsible or the other SATA ports.
Update#2 . So Samsung Rapid Mode seems to work fine, again no crashes at all. This is getting really weird. So that leaves me with the Sata ports ,now i don't know if i need to change again sata ports to recreate the problem or leave it as it is (working) but then again if it's indeed the SATA ports then maybe something is faulty. Either way i'll check it. :/
Update#3 . I think i came to a conclusion. SATA ports 7-10 seem to have the problem.
- I reconnected everything to the original ports i was using (SSD to SATA3 and 2xHDD's to SATA10 & 9) .The crash happens the second time i restart the PC.
- Moved SSD to SATA1 , crash happens again at the second boot.
- Moved the 2xHDD's to SATA 7&8 ,crash happens at first boot.
- Moved the 2xHDD's to SATA 3&4 . NO Crash occurs.
I have no idea what's going on, the manual states that SATA 7-10 support only IDE mode and AHCI (SATA 1-6 supports RAID 0,1,5,10). For the record i do not use RAID.
So what is the problem? I didn't have any issues at all with the previous configuration. Did any of the SATA port's became faulty when using the "Windows 8/8.1 feature" after the bios update? Should i ask for a replacement?
The last thing i could try is to unistall the Intel Rapid Storage. MSI's drivers site for this m/b has the 13.1.0.1058 version while Intel has 13.6.0.1002 but they do not work as it says platform is not supported. I have the MSI's version installed all this time.

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

Dvd drive wont eject - using windows 7 - G50-70 i5

Im having problems with my dvd drive. Have seen a few similar posts on here but I cant get anything to work. The drive did initially work, but now I have installed windows 7, it wont eject. The drive can read discs. When I press the eject button, the light comes on, and I get the usual noise of the drive, but it wont eject. It will eject using a paperclip, but not using eject under my computer. Ive installed the lenovo eject utility, but no idea how to use it, but I dont think that having to go into the bios everytime or to use a paperclip is acceptable on a new laptop. Would be grateful for any tips to try before I send it back. For example, where can you download a mat**bleep**a driver or firmware update? Ive searched but they dont seem to have a website. All I seem to get is lots of utilities that want paying for downloading anything. Many thanks for any help, Tristan
Solved!
Go to Solution.

hi Tristan,
Welcome to the Forums.
AFAIK, when you press the eject button, it sends a signal to the logic board, and the logic board sends a function to the eject machanism to release the tray. From your observation, it's likely that there's a mechanical or other physical failure inside the ODD that's preventing the tray to eject.
The Lenovo Eject Utility on the other hand is design for Thinkpads (haven't tested this on Ideapads units) and its function is the same when you right click on the DVD Icon and chooe Eject.
- Sample image
I recommend you contact lenovo and report your findings as you may likely need to send the unit for service.
Support phone list
More info:
ODD - Mechanical Parts
Regards
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Windows 7 won't load after installing new Hard Drive and Recovery software

HP G72 Notebook PC
xz218UAR
I guess a virus crashed my hard drive so I bought a new one. I installed the new drive and loaded the recovery disks that I also bought from HP. Apparently Windows didn't load properly and it keeps telling me to RELOAD WINDOWS. I've tried starting over from Disk 1 but it's not doing anything different to fix it.
I removed the new hard drive and reinstalled it but it's still doing the same thing.
What am I doing wrong and HOW DO I FIX IT?

Hi,
Before trying the following, make sure you can still read the 25 Character Product Activation key on your Windows COA label ( 5 blocks of 5 alpha/numeric sets ).
Assuming that this is just a problem with the Recovery process, there is a straight forward work around if you have ( or can borrow ) a retail Windows 7 installation disc that is exactly the same version as your OEM installation - ie if your notebook came with Windows 7 Home Premium 64bit this is the exact retail version you would need.
If you don't have access to a retail disc, you can create an installation disc yourself using another PC - just download the correct Disc Image from the link below and use an application such as ImgBurn to burn the ISO correctly to a blank DVD - a guide on using ImgBurn to write an ISO to a disc is Here. These Images are clean and from a well-respected source, however there are only limited versions available.
Windows-7 sp1-iso-official-32-bit-and-64-bit
Use the disc to perform the installation, enter the Windows activation key found on the COA Label when requested and when the installation has completed, use the 'Phone Method' detailed in the link below to activate the OS - this method supported by Microsoft and is popular with people who just want a clean installation of Windows 7 without the additional software load normally bundled with OEM installations.
http://www.kodyaz.com/articles/how-to-activate-windows-7-by-phone.aspx
Any additional drivers you may need can be found Here.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

New version wont load..Message Error 7 - Windows error 126

new version wont load..Message Error 7 - Windows error 126

Any update on this???? Still having the same problem.

Latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

Any update on this???? Still having the same problem.

X99S Gaming 7 - Windows ME driver wont load

Similar Messages

Maybe you are looking for