Xacute SPC/SQC Analysis Action Output XML

I am using 11.5 and am going to implement some BLS's with the SPC/SQC Analysis action.
My question is how do I work with that XML Output from the Action. I need to look at one of the "Rowset" pieces at a time with an Iterator or Sort and Filter action but cannot get the actions to discriminate the Rowset I want. They all want to process a composite of the entire XML.
I tried to break up the output into 5 separate XML documents without success. I am sure I must be doing it wrong, there must be a way to work with it.
What is the best way to handle a compound XML output like the one from the SPC/SQC Analysis action?
...Sparks

You would need to repeat on a particular Rowset[n]/Row depending upon the information you are looking for.
For example ,If I remember correct, the third Rowset gives you the WECO violated rules.
Therefore if you are looking for violated WECO rules then you will have the following XPATH for the Repeater action
<Action Name>.Results{/Rowsets/Rowset[3]/Row}.
Hope this helps.

Similar Messages

SPC/SQC Chart/Analysis problem

Hello to all,
I am new to xmii and I am trying to get started with the SPC/SQC Analysis tools. I have been able to get the chart to work but I am having trouble with Analysis block. I am not able to config the Analysis tool to work correctly. Is there any examples or documentation on the configuration and use of the xmii quality tools (beyond the online help in BLS) that I can use to configuration the tools correctly.
thank you in advance

Roger,
If you can get the iSPCChart applet to work, then getting the action block to work should be quite similar. Map in the same query and display templates from your applet, along with any Parameter overrides or linked in properties that you would do in either with HTML or JavaScript on a web page. If the templates work by themselves using the dynamic page generator then it should only require the configure dialog settings for the action block.
The output of this action block should be a multiple Rowset IllumDoc that looks just like the SPC Results output you get from the applet right-click menu (not the raw data - but the spc details).
To see the xml results from your applet, hold down the control key when you select SPC result details. This output should match the output from your SPC/SQC action block.
Regards,
Jeremy

Custom action with XML type input and output parameter.

Hi,
I want to develop custom action with xml type input and/or output parameter.
Is there sample code for java side. How is the definition of input and/or output parameter and set/get methods?
does it need special .jar file to develop custom action like this?
Thanks.

Cemil - yes, you can use XML data types. Use the class
com.sap.lhcommon.xml.XMLDataType
for your parameter type. Here is a snippet from a custom action we use to log XML (instead of just returning the #text node like the default logger does):
public class XMLLogger extends ActionReflectionBase
    private String source;
    private String eventType;
    private String textMessage;
    private XMLDataType xmlMessage;
    public XMLLogger()
        log = new Logger("UserLog");
        source = DEFAULT_SOURCE;
        eventType = TYPE_INFO;
        textMessage = "";
        xmlMessage = new XMLDataType();
    public XMLDataType getXmlMessage()
        return xmlMessage;
    public void setXmlMessage(XMLDataType xmlMessage)
        this.xmlMessage = xmlMessage;
    public void Invoke(Transaction transaction, ILog ilog)
        StringBuffer sb = new StringBuffer();
        sb.append('[');
        sb.append(source);
        sb.append("] ");
        sb.append(textMessage);
        sb.append(XMLUtils.convertXmlToString(xmlMessage));
XMLUtils is a helper class we wrote - it's just a bunch of standard Java XML boilerplate code. The important part you need to know is XMLDataType.getDocument() will return an org.w3c.dom.Document.
I hope that was enough information to help.
-tim

Errors in output XML

Hi All,
output XML of my XSL Transformation has strange errors. First of all, the xmlns attribute is not in the root tag, but in the child element. Second problem is, that all information is listet after the root tag again:
XML output:
<?xml version='1.0' encoding="UTF-8"?>
<SyncMXINVENTORY xmlns="">
TKGITEM1
6102
UOM
111-222-ccc
0.000000
0.000000
<MXINVENTORYSet xmlns="http://www.ibm.com/maximo">
<INVENTORY action="AddChange">
<ITEMNUM>TKGITEM1</ITEMNUM>
<LOCATION>6102</LOCATION>
<ISSUEUNIT>UOM</ISSUEUNIT>
<BINNUM>111-222-ccc</BINNUM>
<INVCOST>
<AVGCOST>0.000000</AVGCOST>
<STDCOST>0.000000</STDCOST>
</INVCOST>
</INVENTORY>
</MXINVENTORYSet></SyncMXINVENTORY>
Correct output should look like this:
<?xml version='1.0' encoding="UTF-8"?>
<SyncMXINVENTORY xmlns="http://www.ibm.com/maximo">
     <MXINVENTORYSet>
          <INVENTORY action="AddChange">
               <ITEMNUM>TKGITEM1</ITEMNUM>
               <LOCATION>6102</LOCATION>
               <ISSUEUNIT>UOM</ISSUEUNIT>
               <BINNUM>111-222-ccc</BINNUM>
               <INVCOST>
                    <AVGCOST>0.000000</AVGCOST>
                    <STDCOST>0.000000</STDCOST>
               </INVCOST>
          </INVENTORY>
     </MXINVENTORYSet>
</SyncMXINVENTORY>
Thanks
Hamza

Hi Joe!
Yes, I do and I'm interested in the fix.
Thanks and regards
Hamza

Proxy output not displayed in the output XML

Hi,
I have created a web service and is calling the service using SOAP UI tool. To do it i have created an RFC Fm and inported to SAP PI and activated it with the input and output parameters that i need. When i am calling the service through the SOAP UI, in debugging( in the provider class of the service interface of the sproxy transaction ) i am able to see the values filled in one of the parameters but the same is not getting displayed in the output XML.(Response). Can any one please suggest what cud be the reason.
Thanks

Hi,
can give us a hint? Code output, screenshot? btw I hope your service is a Synchronous service.
Thanks Nick.

How to use an .xsl file to transform input XML to re-formatted output XML?

Hello,
I have a .xml file from a report that I want to use a stylesheet to transform into a different .xml format.
I am reading that I can create a .xsl file to read my input and then transform it to a new output .xml file.
How do I load this into the Apps?
I tried creating a template definition and loading the .xsl in as type 'XSL-TEXT' and also, I added
<?xml-stylesheet type="text/xsl" href="Transform.xsl"?> to my xml data source. The output looked the same as the input.
Has anyone done this before? Any suggestions would be great!
Thanks
-CC

This is how I use e4x with HTTPService:
import mx.collections.XMLListCollection;
import mx.rpc.events.ResultEvent;
[Bindable] private var claimsXLC:XMLListCollection;
private function claimsHandler(evt:ResultEvent):void{
claimsXLC = new XMLListCollection(evt.result..claim as XMLList);
XML data is being returned, but I use XMLList to create the XMLListCollection.
If this post answers your question or helps, please mark it as such.

Mapping question - how to remove empty recordsets from output XML?

Hello everyone!
I have a mapping problem I hope you can help me out with.
Here is an example of the source message:
<IDOC>
.    <HEAD>
.    </HEAD>
.    <DET>
.    .    <Node>
.    .    .    <nodeA>001</nodeA>
.    .    .    <nodeB>OA</nodeB>
.    .    </Node>
.    .    <Node>
.    .    .    <nodeB>OB</nodeB>
.    .    </Node>
.    .    <Node>
.    .    .    <nodeA>002</nodeA>
.    .    .    <nodeB>OC</nodeB>
.    .    </Node>
.    </DET>
</IDOC>
After testing the above XML in the message mapping, here's what my target looks like:
<FILE>
.    .    <Rec>
.    .    .    <nA>001</nA>
.    .    .    <nB>OA</nB>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nB>
.    .    .    <nA>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nA>002</nA>
.    .    .    <nB>OC</nB>
.    .    </Rec>
</FILE>
"Node" in the "source" message is mapped to "Rec" in my "target" message.
"Node=" -
> "Rec"
You may notice the the "Rec" in the second entry has empty fields. The reason this is so is because I put an "IF" condition in field "nA" and field "nB" that checks whether "nodeA" in the "source" exists/has a value, and if it doesn't, empty values should be given.
Here's my problem, I need the XML output to be clean. All empty Recs should be removed from the Output XML so that it resembles the one below:
<FILE>
.    .    <Rec>
.    .    .    <nA>001</nA>
.    .    .    <nB>OA</nB>
.    .    </Rec>
.    .    <Rec>
.    .    .    <nA>002</nA>
.    .    .    <nB>OC</nB>
.    .    </Rec>
</FILE>
I've tried several ways to get this done to no avail. Would anyone be able to help me out? I would really, really appreciate it!
Warm regards,
Glenn

Hello,
Here's how the Display Queue looks like from the "CreateIF"
Default Context:
0     [false]     [suppress]
1     [false]     [suppress]
2     [false]     [suppress]
3     [true]     []
4     [false]     [suppress]
5     [true]     []
6     [false]     [suppress]
7     [false]     [suppress]
8     [false]     [suppress]
9     [true]     []
10     [false]     [suppress]
11     [false]     [suppress]
12     [false]     [suppress]
13     [true]     []
14     [false]     [suppress]
15     [false]     [suppress]
16     [false]     [suppress]
17     [true]     []
18     [false]     [suppress]
19     [false]     [suppress]
20     [false]     [suppress]
21     [true]     []
CreateIF Context up one notch:
0     [false]     [suppress]
1     [true]     []
2     [true]     []
3     [true]     []
4     [true]     []
5     [true]     []
6      [true]     []
7     [true]     []
8     [false]     [suppress]
9     [false]     [suppress]
10     [false]     [suppress]
11     [false]     [suppress]
Here's how the Display Queue looks like from the "NodeA"
SUPPRESS     [false]
SUPPRESS     [false]
[0000000292]     [false]
[0000000292]     [true]
[0000000252]     [false]
[0000000252]     [true]
SUPPRESS     [false]
[0000000078]     [false]
[0000000078]     [false]
SUPPRESS     [true]
[0000000109]     [false]
[0000000109]     [false]
SUPPRESS     [false]
[0000000292]     [true]
[0000000292]     [false]
SUPPRESS     [false]
[0000000076]     [false]
[0000000076]     [true]
SUPPRESS     [false]
[0000000292]     [false]
[0000000292]     [false]
SUPPRESS     [true]
SUPPRESS     [false]
NodeA context one notch up:
SUPPRESS     [false]
[0000000292]     [true]
[0000000252]     [true]
[0000000078]     [true]
[0000000109]     [true]
[0000000292]     [true]
[0000000076]     [true]
[0000000292]     [true]
[0000000074]     [true]
[0000000077]     [true]
[0000000081]     [true]
[0000000292]     [true]
[0000000252]     [true]
[0000000081]     [true]
[0000000081]     [false]
SUPPRESS
Hope that helps you help me!
Glenn

XSLT Generation from input and output XML

Is it possible to generate an XSL mapping file in Java if we have input and output XML.
If yes, then how to achieve this when user defined functions are used during mapping?

Hi Prateek,
check the following links for Business connectors and adapter:
http://help.sap.com/saphelp_nw2004s/helpdata/en/92/3bc0401b778031e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/2c/4fb240ac052817e10000000a1550b0/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/6a/3f93404f673028e10000000a1550b0/frameset.htm
Hope these help you.
Regards,
Anuradha.B

Idoc to XML, namespace is not getting created in output XML

Hi All
My interface is idoc to XML.
I am using graphical message mapping.
In output xml , namespace is not formed
Can any one tell why namespace is not created in the XML and
How to add the namespace to the output XML .
Kindly help
Regards,
Sheela

Hi,
You can change your external definition to achieve it. just compare the structure of your xsd with some other normal data type xsd and change accordingly.
Inder

Error in outputting xml formatted data

Hello,
I'm trying to output xml formatted data using apex.
At about 70% into the formatted output I get this in the browser:
<descript>punct= & > < /,() &</descript>
</row>
- <row The XML page cannot be displayed
Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
Only one top level element is allowed in an XML document. Error processing resource 'http://apex.oracle.com/pls/otn/f?p=158...
<script language="JavaScript1.1" type="text/javascript">
-^
m">>
<DIVI have a 600 row table (dml below) with identical string in each row of the descript column. (I put in some special characters just to push it through the escape function for html. It is displaying the text correctly.)
The page has one report region (plsql below).
The page template is stripped down.
My local results are identical to the otn hosted workspace.
I did dump the table in xml format and displayed the dump file in browser without a problem, so I'm missing something in the code.
Thank you.
Albert
On OTN webspace, go to http://apex.oracle.com/pls/otn/f?p=15866:1:1291425545573680200:::::
plsql
declare
xdescript varchar2(4000);
    begin
    -- xml preface is in the page template
    -- htp.p('<?xml version="1.0"?>');
    htp.p('<rowset>');
    begin
        for item in
        (select descript,cid from receipts order by cid)
        loop
        htp.p ('<row>');
        xdescript := htf.escape_sc(item.descript);
        htp.p('<cid>' || item.cid || '</cid>');
        htp.p('<descript>'|| xdescript || '</descript>');
        htp.p('</row>');
        end loop;
    end;
    htp.p ('</rowset>');
end;
dml
CREATE TABLE "RECEIPTS"
   (     "CID" NUMBER,
     "AMOUNT" NUMBER NOT NULL ENABLE,
     "CLEARED" DATE,
     "DESCRIPT" VARCHAR2(80),
     "DATEENTERED" DATE DEFAULT SYSTIMESTAMP,
     "CHECKNBR" NUMBER,
     "CLEARSEQ" NUMBER DEFAULT 0,
      CONSTRAINT "RECEIPTS_PK" PRIMARY KEY ("CID") ENABLE
CREATE SEQUENCE   "RECEIPTS_SEQ" MINVALUE 1 MAXVALUE 999999999999999999999999999
INCREMENT BY 1 START WITH 4319 CACHE 20 NOORDER NOCYCLE
CREATE OR REPLACE TRIGGER "BI_RECEIPTS"
BEFORE INSERT ON "RECEIPTS"
FOR EACH ROW
BEGIN
    SELECT "RECEIPTS_SEQ".NEXTVAL INTO :NEW.CID FROM DUAL;
END;
ALTER TRIGGER "BI_RECEIPTS" ENABLE
/

May be it helps you. I use SQL/XML and APEX Application Process to generate XML succesfully
Here is the result:
http://htmldb.oracle.com/pls/otn/f?p=9774:101:0:APPLICATION_PROCESS=RSSNEWEVENTS
and here is the Process Text source:
declare
a clob;
begin
owa_util.mime_header( ccontent_type => 'text/xml', bclose_header => TRUE, ccharset => 'utf-8');
htp.prn('<?xml version="1.0" encoding="UTF-8"?>');
select
XMLTYPE.getStringVal(
XMLElement("rss",
XMLAttributes('2.0' as version),
XMLElement("channel",
XMLConcat(
XMLElement("title",'iActiveLife - novinky'),
XMLElement("link",'http://www.iactivelife.cz/'),
XMLElement("description",'iActiveLife - Zajímavý ivot snadněji'),
XMLElement("language",'cs'),
XMLElement("pubdate",''),
XMLAgg(
XMLElement("item",
XMLConcat(
XMLElement("title",event_name),
XMLElement("link",'http://htmldb.oracle.com/pls/otn/f?p=' || v('APP_ID') || ':37:' || v('SESSION') || '::NO::P37_EVENT_ID:' || event_id),
XMLElement("description",'')
) into a
from (
select event_id,event_name,issue_date, last_update_order
from (
select events.event_id, events.event_name, events.issue_date, rank () over (order by events.issue_date desc) as last_update_order
from events
where exists ( select * from opportunities where events.event_id=opportunities.event_id and opportunities.user_id is not null)
order by events.issue_date desc)
where last_update_order<=10
htp.prn(a);
end;

Output XML file problem (in FILE to RFC scenario)

hi,
   my problem is that in the export parameter i have 3 variables but my output xml file shows only 2 parameters . I have checked my mapping all 3 parameters are mapped properly in output mapping .
Initially when i started the scenario there were only 2 parameters in my export list .
i completed this suuccesfully and then as per new requirement one more parameter was needed to be added i added a new parameter and reimported my rfc .
the response tab of the reimported RFC shows me the newly added parameter but my final xml file only shows me the previous 2 it doesnt show me the newly added one is there any seeting which i need to change like in idoc where we have to readd the idoc in IDX2
With regards
Bhawarlal Choudhary

Hi,
2 Introduction
Configuring IDoc adapter in Exchange Infrastructure 3.0 requires some configuration on the SAP
systems, for both XI and the backend system where the IDoc message is to be sent. These steps, although
simple, are many times missed or mis-configured, causing the delivery of messages to fail.
Since IDoc adapter uses the ABAP stack, instead of J2EE, the configuration requirements are mainly in
ABAP.
Setting up IDoc adapters requires the XI integration server to be able to communicate with the backend
SAP system, and also to make sure that the Logical System Name used when posting IDoc exists on the
backend SAP system.
3 The Step By Step Solution
The basic steps for the IDoc configuration are outline below:
1. Configure SM59 on XI to communicate to SAP backend system.
2. Configure port on XI for IDoc communication.
3. Create or verify the Logical System Name on the SAP backend system.
4. Create or verify business system in XIs System Landscape Directory.
5. Verify the Logical System Name of the business system.
6. Verify or add the Logical System Name for the sender business system.
7. Create/configure the Communication Channel for the IDoc receiver adapter
3.1 Configure SM59 on XI to communicate to SAP backend system.
1. Using transaction SM59, create an RFC destination with Connection Type = 3.
In this example, the RFC destination name is NDVCLNT510.
2. Enter the logon information:
3. Test the connection by clicking on Testing connection and Remote logon.
Both must be successful.
3.2 Configure port on XI for IDoc communication.
4. Go to transaction IDX1 on XI, and create a port. In this example, the Port name is SAPNDV.
     The Port name must be in the form of SAPxxx, where xxx is the system ID of the backend SAP
system.
     The Client must be the client number of the backend SAP system.
     Select the RFC Destination which was created in the previous step.
3.3 Create or verify the Logical System Name on the SAP backend system.
5. Enter transaction SALE on the SAP backend system.
6. Create or verify the Logical System Name. In our example, NDVCLNT510 is verified.
3.4 Create or verify business system in XIs System Landscape Directory.
The business system name for the SAP backend system must contain a valid Logical System Name. This Logical System Name is the one verified or created in the previous step.
7. In the System Landscape Directory, select the SAP backend business system. If one does not exist, then create the business system. Verify the Logical System Name.
3.5 Verify the Logical System Name of the business system.
8. In the Integration Directory, doubleclick on the business system (in our example, it is NDVCLNT510).
Navigate the menu:
Service Adapter Specific Identifiers.
If information is empty or incorrect, then it will have to be synchronized with the content of the System Landscape Directory. Follow the steps below for synchronization.
9. (Optional) Synchronization of the business system in Integration Directory to the business system in System
Landscape Directory.
     Double-click on the business system in the Integration Directory.
     Switch to Edit mode.
     Select menu: Service Adapter-Specific Identifiers
10. (Optional) Within the dialog box, click on the button as indicated below to resynchronize.
11. (Optional) If the expected data from the System Landscape Directory is not updated, then the SLD cache may need to be cleared first.
3.7 Create/configure the Communication Channel for the IDoc receiver adapter.
15. In the Integration Directory, create an IDoc receiver communication channel.
     The RFC Destination is from step 3.1.
     The Port is from step 3.2.
NOTE:
There is no need to create an IDoc sender Communication Channel for XI. Instead, the backend SAP system must be configure to send the IDoc to XI.
4 Appendix
Transaction: IDX2
There are a couple of situation where IDX2 can be useful on the XI system.
1. When we want to test connection between the XI and SAP backend system.
2. When an IDoc has changed, and the meta data stored in XI needs to be update. When an IDoc is sent from the SAP backend system to XI, XI will first check to see if the meta data for the IDoc is already in its persistent cache. If not, then XI will use the configuration in IDX1 to retrieve the IDoc meta data from the backend system. If the
meta is already in cache, then it will NOT do so. Therefore, when an IDoc has changed, it is necessary to manually update the new meta data on XI, or delete it from the cache, so that the latest version can be retrieved. IDX2 is used for this purpose.
Go to transaction IDX2 and click on Create.
Enter the IDoc Type and the Source Port as defined in step #2. Click Continue.If successful, the following will show up. If error occurs, then the IDX1 configurations will need to be re-checked.
Regards
Hemant
If find helpful plz award points

Junk Characters in the output XML file after Parsing

Hi
I am using DOM parser to parse an XML file.
After parsing the input XML file, i am fetching some contents
from the same and also putting the same contents in the parsed output file which is also an XML file.
The problem here is that the after putting the contents to the output XML file from the input XML file,
some junk character appears at the end of each and every tag in the outputfile.
The junk character is some thing like this : " ampersand hash thirteen and a semicolon "
(*THE MESSAGE DID NOT ACCEPT THE SYMBOLS KINDLY TRANSLATE THE ABOVE WORDINGS*
INTO SYMBOLS)
This character gets appended at the end of each and every tag in the output file due to which the output file
is not recognised as an XML file.
Please let me know as to why is this character appearing and also please suggest some solution
for the same.
-Thanks in Advance.
Edited by: itskarthik on Oct 10, 2008 7:16 AM
Edited by: itskarthik on Oct 10, 2008 7:18 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:19 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM
Edited by: itskarthik on Oct 10, 2008 7:23 AM

Wierd.
Try this piece of code. (You can always change it to use input file and output file instead of string if you want)
What is your output?
import java.io.ByteArrayInputStream;
import java.io.ByteArrayOutputStream;
import java.io.IOException;
import java.io.OutputStream;
import javax.xml.parsers.DocumentBuilderFactory;
import javax.xml.transform.Result;
import javax.xml.transform.Source;
import javax.xml.transform.Transformer;
import javax.xml.transform.TransformerFactory;
import javax.xml.transform.dom.DOMSource;
import javax.xml.transform.stream.StreamResult;
import org.w3c.dom.Document;
public class XMLTest {
     public static void main(String[] args) throws Exception {
          String input = "<?xml version=\"1.0\" encoding=\"UTF-8\"?>\r\n" +
                              "<test>\r\n" +
                              "</test>";
          System.out.println("Input:");
          lookForCR(input);
          DocumentBuilderFactory factory = DocumentBuilderFactory.newInstance();
          Document doc = factory.newDocumentBuilder().parse( new ByteArrayInputStream(input.getBytes()) );
          Source source = new DOMSource(doc);
          ByteArrayOutputStream bArrOut = new ByteArrayOutputStream();
          Result result = new StreamResult( new StripOutputStream( bArrOut ) );
          Transformer xformer = TransformerFactory.newInstance().newTransformer();
          xformer.transform(source, result);
          System.out.println("\nResult:");
          lookForCR(bArrOut.toString());
          System.out.println("\nDone");
     public static void lookForCR(String input) throws Exception {
          char[] chars =input.toCharArray();
          for ( char chr : chars ) {
               if (chr == 13 ) {
                    System.out.println("Has 0x0D character!!");
class StripOutputStream extends OutputStream {
     OutputStream out = null;
     public StripOutputStream(OutputStream out) {
          this.out = out;
     @Override
     public void write(int b) throws IOException {
          if ( b != 13 )
               out.write(b);
}- Roy

How to remove namespace link from the output XML

i have to remove 'xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions"' (namespace) from the output xml file which is generated from the BIP. I need my output XML file without that namespace link, this namespace link is coming for each element.
Anybody know how to do that please help.
output xml file
<?xml version="1.0" encoding="UTF-8" ?>
<Reports version="2.00">
<deliveryNote xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<subjectId />
</deliveryNote>
<deliveredReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<referDate>[Delivery note->H4]</referDate>
</deliveredReports>
<simpleReports xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions">
<numberOfReports>2</numberOfReports>
<nReport>
<reportName>Xyz</reportName>
<reportVersion>1.0</reportVersion>
<observations>
<numberOfObservations>15</numberOfObservations>
<columnObservation>
<y>9</y>
<rO>
<x>14</x>
<o>11</o>
<o>21</o>
<o>121</o>
</rO>
</columnObservation>
</observations>
</nReport>
</simpleReports>
</Reports>
my xslt file
<?xml version="1.0" encoding="ISO-8859-1"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xdoxslt="http://www.oracle.com/XSL/Transform/java/oracle.apps.xdo.template.rtf.XSLTFunctions" >
<xsl:output method="xml" encoding="UTF-8"/>
<xsl:template match="/">
     <xsl:element name="Reports">
          <xsl:attribute name="version">2.00</xsl:attribute>
               <deliveryNote>
                    <subjectId></subjectId>
                    </deliveryNote>
               <deliveredReports>
                    <referDate>[Delivery note->H4]</referDate>
               </deliveredReports>
               <simpleReports>
                    <numberOfReports>2</numberOfReports>
                    <nReport>
                              <reportName>Xyz</reportName>
                              <reportVersion>1.0</reportVersion>
                                   <observations>
                                   <numberOfObservations>15</numberOfObservations>
                                   <columnObservation>
                                        <y>9</y>
                                        <rO>
                                             <x>14</x>
                                                  <xsl:for-each select="TEST_XML/LIST_R1/R1">
                                                       <o><xsl:value-of select="xdoxslt:lpad(COL1,10,' ')"/></o>
                                                  </xsl:for-each>
                                        </rO>
                                   </columnObservation>
                                   </observations>
                         </nReport>
                    </simpleReports>
          </xsl:element>
</xsl:template>
</xsl:stylesheet>

Please post the same in BI Publisher forum
BI Publisher
Thanks,
Vino

Special characters issue in output XML - file adapter - SOA 10.1.3.4

Hi,
I use a DB adapter and File adapter to retreive data from database and create output XML file.
For the database record which have special characters (for example ' , <, >), it will just output the same character in XML file, which cause other system to reject this XML file because of those characters.
Anyone have this issue ? How can i resolve that ?
Thanks

Try converting the characters to < and >. This should work. Make sure the stand-alone & character is converted to & amp; (written with space as HTML will convert it back to &).
-AR

Different input and output xml files [encoding]

Welcome. I write a little code that connect to ftp server, log in, than search an input xml file. That file is input for BufferedReader. This data are writing to local file. Im from poland and i wish use polish fonts and that fonts are broken in this output file (input is ok, it's write in editor that support utf-8 encodding)
Code of my program:
http://www.piotrkow.net.pl/~loko/xml_java/java_pyt.html
Input file:
http://www.piotrkow.net.pl/~loko/xml_java/agreeting[input].xml
Output file (totaly broken):
http://www.piotrkow.net.pl/~loko/xml_java/agreeting[output].xml
How do I fix this? Please help.
PS: Documentation used ftp libraries:
http://jvftp.sourceforge.net/docs/api/

Problem has been solved :)
--> http://www.piotrkow.net.pl/~loko/xml_java/java_solved.html

Xacute SPC/SQC Analysis Action Output XML

Similar Messages

Maybe you are looking for