XAMPP Installation - Apache Error 137!
Hi,
I have a Solaris 10 box I tried installing XAMPP on from ApacheFriends. Its basically Apache 2 with PHP already configured, it also installs MYSQL and a FTP server.
It installs succesfully through the shell script availible from http://apachefriends.org but when I try to run the start script in terminal it displays.
# /opt/xampp/xampp start
Starting XAMPP for Solaris 0.7...
XAMPP: Starting Apache
XAMPP: ERROR 137! COuldn't start Apache!
XAMPP: MySQL started successfully.
XAMPP: ProFTPD started successfullyAny ideas why apache isn't starting?
Rob
This would be an alternative, however Im not to good with installing PHP and MYSQL, which is why I opted for XAMPP. I'm guessing WebMin is Perl, which is already on the system?
I know you may have reasons to use XAMPP, but I find
the bundled & companion Solaris packages much
'neater.' For example, to start Apache on Solaris
10:
# svcadm apache2 enable
# svcadm apache2 start
Then just configure as necessary. Webmin makes
further setup easy for most new users. Install
Webmin by running [as root]
/usr/sfw/lib/webmin/setup.sh
Similar Messages
-
Apache Error During the Installation of Oracle 10g Infrastructure
Hi,
I am installing the Oracle 10g Infrastructure.During the OPMN Configuration Assistant Installation, i encountered the Apache error. The error is failed to start a managed process after the maximum entry limit. I tried this command: opmnctl startproc ias-component=HTTP_Server but still the windows displays this message: Apache.exe has encountered a problem and needs to close. When I open the logs located at <ORACLE_HOME>\opmn\logs\HTTP_Server.log, the logs says Unclean shutdown of previous Apache run?. I tried to uninstall using deconfiguration.pl but the program says that its ok to use the Universal installer. I uninstall then deleted the entries at the registry and then reinstall it, but still, it displays the error. Are there any solution that can solve this problem?
I am installing in windows xp service 2. My oracle infrastructure version is 10.1.2Hi,
There is no error_log file under this directory: <ORACLE_HOME>/Apache/Apache/logs. Maybe the cause is the conflict of computer name. I'll keep you posted as long as I finish installing the application. -
Index.php "Something is wrong with the XAMPP installation :-("
Hello Brian Woods, Dave Powers, and Other Experts.
I am new on the block as far as Wordpress and trying to run a testing server using XAMPP via Dreamweaver CS5. I carefully followed all the directions in your tutorials:
http://www.adobe.com/devnet/dreamweaver/articles/setup_testing_server.html
http://www.adobe.com/devnet/dreamweaver/articles/dw_wordpress_pt2.html
Brian, everything worked up until I reached the following step under the topic of: "Testing code hinting"
After I open the "index.php" file, I received the following error in Dreamweaver CS5:
"Something is wrong with the XAMPP installation :-("
Again, I carefully followed all the instructions and everything up until now works: the Theme loads up fine, XAMPP works, and I can view the control panel fine in Wordpress.
Does anyone have any ideas?
Thanks for your support.
DELL INSPIRON LAPTOP CORE 2 64 BIT 2.0 GHZ
4 GIG RAM
WINDOWS 7 PREMIUMSteak&Lobster wrote:
After I open the "index.php" file, I received the following error in Dreamweaver CS5:
"Something is wrong with the XAMPP installation :-("
That's a new one on me, but I very much doubt that the error message was generated by Dreamweaver, because DW is designed to work with any testing server. It's not tied to using XAMPP. Sounds like some weirdness from XAMPP. I must say that XAMPP 1.7.4 seems to have a few bugs. -
Camera Raw 6.7 Update for Mac: Installation Failed error message. Update downloaded directly from Adobe website. Newly purchased Mac Workbook Pro, OS 10.10, using Photoshop CS5. Other updates successfully accomplished. Camera Raw 6.7 Update was downloaded multiple times with multiple installation attempts. Any recommendations?
thanks for the prompt response...i appreciate it. according to the link you listed, that's correct. the strange thing is that prior to the upgrad to mac os 10.8.4, photoshop CS5 was working just fine and i was able to open my canon raw files with my current camera raw plug-in version 6.7 which adobe has indicated is the last camera raw update they'll be offering for cs 5
so it's clearly an issue related to the "upgrade" of the os. seems like every solution creates 6 new problems...further evidence for the notion that if it ain't broke don't fix it! thanks again. -
File does not exist error in Apache error log
I have been getting the following error in apache error log located at $INST_TOP/apps/PROD_aclapp/logs/ora/10.1.3/Apache
[Wed Mar 14 15:17:00 2012] [error] [client 173.26.0.33] [ecid: 1331718420:172.25.16.30:2172:0:484,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_IN.properties
[Wed Mar 14 15:19:13 2012] [error] [client 173.20.0.85] [ecid: 1331718553:172.25.16.30:2497:0:56,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:21:47 2012] [error] [client 173.26.0.36] [ecid: 1331718707:172.25.16.30:5691:0:6316,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:21:47 2012] [error] [client 173.26.0.36] [ecid: 1331718707:172.25.16.30:5691:0:6317,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Wed Mar 14 15:21:47 2012] [error] [client 173.26.0.36] [ecid: 1331718707:172.25.16.30:5691:0:6318,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Wed Mar 14 15:22:45 2012] [error] [client 192.168.8.126] [ecid: 1331718765:172.25.16.30:5689:0:5903,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:22:45 2012] [error] [client 192.168.8.126] [ecid: 1331718765:172.25.16.30:5689:0:5904,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Wed Mar 14 15:22:45 2012] [error] [client 192.168.8.126] [ecid: 1331718765:172.25.16.30:5689:0:5905,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/apps/media/oracle/apps/media/splash.gif
[Wed Mar 14 15:22:48 2012] [error] [client 192.168.8.145] [ecid: 1331718768:172.25.16.30:5695:0:6487,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_IN.class
[Wed Mar 14 15:22:48 2012] [error] [client 192.168.8.145] [ecid: 1331718768:172.25.16.30:5695:0:6488,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/ewt/alert/resource/AlertBundle_en_IN.properties
[Wed Mar 14 15:24:53 2012] [error] [client 173.26.2.15] [ecid: 1331718893:172.25.16.30:3108:0:66,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:24:58 2012] [error] [client 173.26.2.15] [ecid: 1331718898:172.25.16.30:2497:0:84,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:25:01 2012] [error] [client 173.26.2.15] [ecid: 1331718901:172.25.16.30:3308:0:9,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.class
[Wed Mar 14 15:25:01 2012] [error] [client 173.26.2.15] [ecid: 1331718901:172.25.16.30:3308:0:10,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.properties
[Wed Mar 14 15:25:17 2012] [error] [client 173.25.2.8] [ecid: 1331718917:172.25.16.30:7669:0:6972,0] File does not exist: /d05_applhome/inst/apps/PROD_aclapp/portal/favicon.ico
[Wed Mar 14 15:25:43 2012] [error] [client 173.25.9.5] [ecid: 1331718943:172.25.16.30:7663:0:5878,0] Directory index forbidden by rule: /d05_applhome/apps/apps_st/comn/java/classes/
[Wed Mar 14 15:25:47 2012] [error] [client 173.25.2.8] [ecid: 1331718947:172.25.16.30:7663:0:5882,0] File does not exist: /d05_applhome/inst/apps/PROD_aclapp/portal/favicon.ico
[Wed Mar 14 15:25:49 2012] [error] [client 173.25.9.5] [ecid: 1331718949:172.25.16.30:5691:0:6389,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.class
[Wed Mar 14 15:25:49 2012] [error] [client 173.25.9.5] [ecid: 1331718949:172.25.16.30:5691:0:6390,0] File does not exist: /d05_applhome/apps/apps_st/comn/java/classes/oracle/forms/engine/RunformBundle_en_IN.properties
Kindly do help me in understanding why this error is arising. The entire directory path in the errors does not exist.
Database version : Oracle 10.2.0.3
Apps version : R 12.0.4Hi;
1. It was working before If yes what have been changed?
2. Did you try to close apps run autoconfig on db than appstier and retest issue?
3. Please see:
R12: "FRM-92050: FAILED TO CONNECT TO SERVER: /FORMS/LSERVLET" Error Message When Launching Forms [ID 1070263.1]
Regard
Helios -
File does not exist: /java/classes message in Apache error log file
I am getting several of these messages in the Apache error logfile.
File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)
Is it normal to see this messages or some configuration is wrong?
thanks,
AzodpePlease post the details of the application release, database version and OS.
I am getting several of these messages in the Apache error logfile.
File does not exist: $JAVA_TOP (this is actually my physical patch for $JAVA_TOP)Is this the complete error message?
Is it normal to see this messages or some configuration is wrong?If your application is functioning properly with no issues, then you can ignore those errors.
Thanks,
Hussein -
SharePoint Designer 2013 after installation getting error with runtime i.e. error writing to file Microsoft.SharePoint.Client.Runtime.Local.Resources.dll Verify that you have access to that directory
after retry..again SharePoint Designer requires the following component require to install Microsoft.NET framework version 4 i have downloaded and try to installed but fail not work please answer what to do?
Thanks and Regards, Rangnath MaliHi Rangnath,
For running SharePoint Designer 2013, you need to install Microsoft .NET 4.0 Framework or higher.
Please uninstall the Microsoft .NET 4.0 Framework, and install it again. After that, reboot your machine.
Best Regards,
Wendy
Wendy Li
TechNet Community Support -
after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)
Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode -
Firefox and Chrome stopped working for apparently no reason. IE works. Have tried proxys, firewalls, and restarting. NOTHING WORKS. Firefox is the oddest as there are no error messages, but just shows practically no movement. Only movement is a quick "loading spin" in the address bar, but then nothing. The tab continues to read "new tab" and the address bar says whatever site I typed in, but goes no where. Chrome shows error 137 if that helps.
It's not just you, I can't authorise my phone. It seemed to go down just after I started the update (it wasn't my fault though). I am using chrome, and it does not seem to be a firewall issue, or the bannerblock issue that I read about else where, since I dont have that program installed. Strange though how the support forum is still running. If I go to http://www.apple.com/support I get nothing, but googling topics allows me to see em.
-
First time on here... so not sure if doing correctly.
I'm tryng to download icloud control panel to my PC (have Windows 7 - so should be ok). I only get so far - 2 times I've tried it. Keep getting message:
The installer encountered errors before iCloud Control Panel 2.1.2 could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
huh?As I mentioned before you need to start the iTunes installation, then do NOT allow it to complete. In other words go all the way to the point that the installer extract the installation files, then STOP right there.
Now look for the temp folder and the files I mentioned in my initial posting. If you don't find the temp folder it may be because you have "Do not show hidden files and folder" selected under "View Tab" in the "Folder Options". You may need to unselec it. If you don't know about hidden files and folders in Windows XP take a look here: http://txpress.blogspot.com/2007/05/show-hidden-filesfolders-in-windows.html
Another possibility is that you may have a different path for your temp folders. To find out where you temp folders are located please do the following:
- Right click on "my computer"
- Select the "Advanced" tab
- Click on "Environment Variables"
Then look for the path for both variables "TEMP" and "TMP" take note of the path and check them out.
Or you may just go to a DOS Prompt and type the following commands:
1 - %temp% and hit enter
2 - %tmp% and hit enter
to both of these commands you will get a reply such as:
'c:\temp' is not recognized as an internal or external command, operable program or bath files.
So by looking at the reply you can see that my temp folder is c:\temp
The above is the temp folder on my machine which I've customized to my own use. Your machine may be different.
I suggest you check for the iTunes temp folder inside both your temp folders locations "TEMP" and "TMP" as they may be in different locations.
IMPORTANT NOTE: If you allow the iTunes installation to complete you will NOT SEE the iTunes temp folder and files because it will be deleted as soon as iTunes processes the installation.
Hope it helps. -
Installer Encountered Errors - PLEASE HELP
Hi,
Getting very annoyed - sat at the computer for almost 2 hours.
Have windows Vista and finally it has allowed me access to install iTunes. When I go through the stages to install I get the following message:
+The installer encountered errors before iTunes could be configured. To retry these operations at a later time, please run the installer again.+
I have tried so many times. Windows is up to date and I have looked at the troubleshooting pages and am getting nowhere. I want to play with my new toy and can't. Can anyone help me get this thing installed successfully.
Thank you!See if you can get itunes to install from another Windows user account. That will tell you if the problem is system-wide or user-related.
Then try other steps listed in this article:
http://support.apple.com/kb/HT1926 -
Everytime I try to install the new itunes it come up with the following message: ' The installer encountered errors before itunes could be configured, Errors occured during installation, your system has not been modified. Please run installer again or click exit' I've tried to install it multiple times now and get the same message everytime. I've also tried re installing itunes 10, but when I go to open it it comes up with the message 'The files itunes libray.itl cannot be read because it was created by a newer version of itunes'. Please help.
Hey sjl95,
Thanks for the question. I recommend that you refer to this article if you are running into issues re-installing iTunes:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/HT1926
Thanks,
Matt M. -
ITunes 7.3 installer "encountered errors before iTunes could be configured"
I was able to originally install itunes 7.3.1.3 (upgraded from 7.2) and use it with my iphone (activated/synced for 2 weeks with no problems). I had a problem due to a disk full which corruped Outlook.
I cleared substantial disk space, reinstalled Outlook 2003. This seemed to have corrupted the iTunes sync function, so I uninstalled iTunes (using Add/Remove Programs control panel), and have since been trying to reinstall. I am continually getting the "iTunes installer Completed - The installer encountered errors before iTunes could be configured" error message.
I have read many messages and suggestions in these discussions, and already tried the following:
Completely uninstalling iTunes and Quicktime (iTunes no longer shows up in the Add/Remove programs or using the Windows install cleanup utility) follwing all the steps listed in "Removing iTunes, QuickTime, and other software components for Windows XP" http://docs.info.apple.com/article.html?artnum=93698.
Quicktime (version 7.2 Pro) is currently installed. I can cleanly install/remove Quicktime alone with no errors, but not using the combined quicktime/iTunes installer.
I have tried redownloading the itunes installer several times, and even used the Apple Software update download only option and then manually running the itunes.msi file, but still get the same error.
I have tried manually removing all instances of iTunes/iPod/activesync/iphone that I can find in the registry and all the iTunes/iPod folders as the above knowlege base article instructs.
There must still be some other remnant of the old install, because if I try to install iTtunes 7.2, I get an error message that a later version is already installed, but I have not been able to find anything else.
I have even enabled the verbose logging, the error seems to occur in this section of the log:
MSI (c) (00:C8) [11:00:26:796]: Invoking remote custom action. DLL: C:\DOCUME~1\[myusername]\LOCALS~1\Temp\MSI36.tmp, Entrypoint: iTunesLaunchConditions
Action ended 11:00:26: iTunesLaunchConditions. Return value 3.
MSI (c) (00:FC) [11:00:26:859]: Doing action: SetupCompleteError
Any suggestions on what else I can try would be appreciated. One of the main reasons I need sync my ipnone to my work windows machine is to keep my Outlook contacts and calendar. I have no problems with iTunes on my macs.
I am running XP SP2, and have local administrator rights on my Dell 610 notebook.I had to find this solution from another site, so thanks to all the people who viewed this thread & knew how to fix this but didn't bother.
If anyone is weary enough to come to this forum to solve this problem, here is one solution that worked for me & it may work for you if you encounter the error:
"the installer encountered errors before safari could be configured"
1. Use a trustworthy registry cleaner to clean your registry such as Ccleaner or Advanced System Care. This step may not be necessary though.
2. Go to "C:\Users\MyUsername\AppData(Hidden)\Local\Temp" & delete everything in it.
3. If step 2 still doesn't allow you to install Safari, then try:
4. Open Start type "CMD" in the search button, then in the cmd prompt "Regedt32"
5. In the reg editor open:
"Computer" / "HKEYCURRENTUSER" / "Software" / "Apple Computer, Inc." & try deleting the entries for any Apple programs that may be causing any conflicts.
Be aware that any programs that you delete registry entries for may not function correctly afterwards or need to be reinstalled, but this more drastic measure should hopefully allow the installation of Safari browser.
Hope this helps any further visitors to this forum looking to solve this problem it worked for me, good luck.
Message was edited by: RottenestApple -
Installer Encountered Errors before iTunes could be Configured
I keep getting the same Error over and over again:
*iTunes Installer Completed*
The Installer encountered errors before iTunes could be configured.
Your system has not been modified. To retry these operations at a later time, please run the installer again.
Click Finish to exit the Installer.I'm using version 8.2 lately and i downgraded to version 7 for some reason.... After i got my new iPhone 3GS yesterday. Which is needed the 8.2 version....So i uninstall the version 7 and re-install the version 8.2 again and i got this message....
*"A NETWROK OCCURED WHILE ATTEMPTING TO READ FROM THE FILE C:\WINDOWS\INSTALLER\BONJOUR.MSI".....*
I try to check this file in my C:\ Drive but unfortunately i can't find it and i can't install the iTunes 8.2..... and the bad thing is i can't f#*******ing use my new iPhone 3GS....
Please help me or otherwise maybe just return it to the shop and get something else instead of this new iPhone 3GS...... too much trouble.... -
I am using Vista 64 bit. Used 64 bit IE to download the proper file
iTunes64Setup.exe
from
http://www.apple.com/itunes/download/
But I get this error when I try to install:
The installer encountered errors before iTunes could be configured.
To retry these operations at a later time, please run the installer again.
Click Finish to exit the installer.
I tried installing when logged in as an administrator, and again as a a user, again same results. I tried uninstalling 32 bit iTunes 7.5 and rebooting, but the issue still remains. I manually wiped away the
c:\Program Files (x86)\iTunes
directory (had only one file in there after uninstall), same problem.
FYI, this is just my secondary machine, so I'm not worried about loosing anything. So registry cleaning likely. But first, I'll try installing on a pristine 64 bit Vista virtual machine, just to see if the installer binary itself runs correctly on a machine without a history of iTunes 32 bit.
Is this a known issue with 7.6 64 bit? Is there a workaround?
There are many search hits for similar errors under 7.5 32 bit, but I seem to be alone with this error with 64 bit installer, for now...FYI, I downloaded iTunes64Setup.exe again (not from cache), despite same exact filesize on my hard drive, this time, no install error, problem solved. So perhaps Apple uses no built-in CRC error detection, but at least it works now. I'm so glad 64 bit Vista is finally properly supported without errors about CD burning when you start it (I never bothered with the gear drivers workaround).
I did notice it still installs in the
C:\Program Files (x86)\iTunes
directory despite being a 64 bit app, not sure if that matters, and not sure if it's a side effect of having 32 bit version in that directory previously.
Maybe you are looking for
-
Strategy escalation not appearing in the escalation node of UWQ.
Hi, Module: Advanced Collections Customer has done the following test case: There are three work items in the collection strategy. First two work items are automatic and completed successfully. Third work item is manual and need to be escalated to ma
-
Converting analog 5.1 (multiple cables) to Digital DI
Hi, So far I?ve been using my Inspire 5. Digital 5700 speaker system together with my Audigy Platinum in my Desktop PC to watch DVDs and play games with a 5. experience. To connect soundcard and Speaker system, I used the provided Digital DIN cable,
-
Can "Save for Web" generate a thumbnail instead of an icon?
Can "Save for Web" generate a thumbnail instead of an icon? Or can the icon be replaced by a thumbnail? Thanks.
-
Copy In to Out points in timeline?
If i'm in the timeline and have in and out points set over a portion of a clip how can i copy the portion between the in to out points to paste else where like you can in fcp? Thanks
-
OCR recovery/restore from backup or ocrmirror 11gr2 RAC
Say i have an OCR and OCRMIRROR on asm diskgroup CRS_OCR ,CRS_OCRMIRROR diskgroups with external redundancy.If i lost one of the diskgroup say CRS_OCR how can i copy over from the OCRMIRROR to restore the primary OCR?or how can i go about restoring t