Xav 701hd 16 pin amp connector part number

Please help me. I need to order this but I can't find a resource for the part number

Hello Ipdaily,
I assume you are referring to the main (16pin) power harness for which the part number is 1-839-376-31.

Similar Messages

  • UMI-7772 position power connector part number

    We lost an UMI-7772/7774 4-position power connector (power input connector for V, C, Viso and Ciso). Anybody knows what is its part number and manufacturer?
    Ben64

    fblerg wrote:
    Hi Ben,
    The power connector is a Mini-Combicon 4 position connector. The part number is 761785-01. You will have to call the Service Line to get pricing and availability. You can get these from Digikey, which might be a better option for these.
    http://www.digikey.com/product-search/en/connectors-interconnects/terminal-blocks-headers-plugs-and-sockets/1442750/page/2
    http://www.digikey.com/catalog/en/partgroup/combicon-fk-mcp-series/2933
    Hi Frank, thanks for the answer. The 761785-01 link is not working (probably only available to NI employees) and a search for 761785-01 on the NI website returns nothing found.
    Ben

  • I need the Lotes (or HP) PCI-e edge connector part number to replace it on a H8-1360t

    The PCI-e graphics processor in my H8-1360t was pulled without releasing the tab on the edge connector first. As a result, the plastic connector pulled free of the fingers. The PC is long out of warranty and this would not be covered by warranty anyway.
    This leaves the PC inoperable as the plastic housing cannot be pushed back on to the fingers. So the motherboard will have to be removed and the PCI-e edge connector replaced.
    The connector is made by Lotes, but has no part number on it. I need a part number in order to obtain a replacement. As far as I know, there is no part-specific tech manual for the motherboard that I could refer to for this information. It would have to come from someone at HP.
    Help.
    This question was solved.
    View Solution.

    A difficult search for the part.
    http://www.ttiinc.com/object/fp_fci_pci.html      http://www.farnell.com/datasheets/188358.pdf
    I am a volunteer. I am not an HP employee.
    To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
    The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
    (2) HP DV7t i7 3160QM 2.3Ghz 8GB
    HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
    Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
    Both Customs use Rosewill Blackhawk case.
    Printer -- HP OfficeJet Pro 8600 Plus

  • On the connector block CB-68LP, there are few screw terminals. I am trying to find the maker and the part number of this screw terminal. Any help is much appreciate​d.

    I am designing a new product to use in our environment and I am trying to go from the I/O card to the PCB eliminating the connector block. For this purpose, I need to find out the screw terminal part number as well as the makers name. Please help.

    The screw terminals are made by Phoenix:
    The 14 screw terminal row is P/N 18-69-33-4
    The 12 screw terminal row is P/N 18-69-31-8

  • HP Docking Station EN488AA - part number for power adapter

    Hi,
    I have a HP Compaq nx8220 notebook, with a HP Docking Station (EN488AA).
    Unfortunately I have lost the power supply for the docking station.
    I still have the power supply for the notebook itself (393955-001) but it does not plug in to the docking station. It is the correct voltage but only 90W instead of 120W, and the connector is the wrong size.
    I've been looking online for the part number for the correct replacement power supply for the dock, but became very confused when I found sites advertising the same replacement part for both the nx8220 and the EN488AA when clearly they are different because the plugs don't match. None specify the plug size so I don't know which is which.
    Can anyone help me identify the correct replacement part? Or better still, is there a plug adapter available so I can use my existing power supply for the dock too?
    Attached are two photos - the plug from the power adapter next to the inlet of the notebook (fits) and the dock (doesn't fit).
    Thanks,
    EddieD97
    This question was solved.
    View Solution.

    The pin in picture looks liek a 5mm pin and one one on docking station is a smart pin. So you would need something like the one in picture in this link.
    In the picture observe the component in left hand bottom corner.
    http://www.amazon.com/HP-power-adapter-airplane-DV574A/dp/B0006VX07I/ref=pd_sim_sbs_pc_11?ie=UTF8&re...
    I would say, take the adaptor to store and get one.
    Wish you luck,
    Karthik
    --Say "Thanks" by clicking the Kudos (purple thumbs up icon in the lower right corner of a post)
    --Please mark the post that solves your problem as "Accepted Solution"

  • Power Adapter Part Number

    Have a HP G63-355DX (HP Product #XH068UA#ABA) that is missing the AC Power Adapter to charge the unit. I have found the specifications listing for the unit, but not the HP part number or the HP spares part number. The adapter is a 65W, 18.5V and possibly PA-1650-02H is mentioned when I try searching.
    Can you provide the HP part and Spares (typically ending in -001) for this unit?

    Hi,
    You can officially use any of the following three references:
    609939-001 AC Smart pin slim power adapter (65-watts) - Requires separate 3-wire AC power cord, non-Power Factor Correction (nPFC)
    693711-001 Smart AC power adapter (65 watt) - Non-power factor correcting (NPFC) - Requires separate 3-wire AC power cord with C5 connector
    613152-001 AC Smart pin slim power adapter (65-watt) - 100-240VAC 1.7A input, 50-60Hz, 18.5VDC 3.5A output - Does NOT include power cord - Does NOT include dongle for use with older, non-Smart compatible notebook PC's
    http://partsurfer.hp.com/Search.aspx?SearchText=XH​068UA

  • Product number for the connector to purchase to connect  ipad 2 to the tv.  Not the Apple TV but I need the connector product number to buy.

    Aapple Customer service,
       Could you please give me the cable/connector part name and part number to order for hooking up my Ipad2 to the TV.
    NOT the Apple TV but just the cable/connector that hooks to the HGMI cable?
    Thanks

    You need the Apple 30 pin Digital AV adaptor:
    http://store.apple.com/us/product/MD098ZM/A/apple-digital-av-adapter?fnode=3a

  • Cisco 2811 Fan Part Number

    Does anyone know whether Cisco has part number for the large fan in 2811. I know p/n for small fan is already there, but I can't find any for large one( I think it s fan 3).

    FAN 1 and 2 is usually a Sunon KDE1204PKVX or a NMB 1608KL-04W, these are the stats:
    Size: 40x40x20 mm
    Rated Voltage: 12V
    Input Current: 0.12A
    Input Power: 1.4W
    Speed: 8200 RPM
    Max Air Flow: 10.8 CFM
    Max Air Pressure: 6.9 mmH2O
    FAN 3 is either a DELTA FFB0412VHN, a NMB 1611KL-04W or a Sunon PMD120PQB1-A, these are the stats:
    Size: 40x40x28 mm
    Rated Voltage: 12V
    Operation Voltage: 4.5V - 13.2V
    Input Current: 0.16A (0.24A MAX)
    Input Power: 1.92W (2.88W MAX)
    Speed: 9500 RPM
    Max Air Flow: 15.79 CFM
    Max Air Pressure: 12.94 mmH2O
    You can use any FAN that have the same specs, but be aware Cisco changed the pin configuration so you need to adjust it accordingly. I got a few stock Sunon MagLev GM1204PQV1-8A and they are perfect match for FAN 3, you just need to swap the Black and Red cable on the connector and they have been working flawlessly on my Cisco 2811 routers.
    Using any 40x40mm FAN that fits will cause throuble if either Air Flow or the Speed are slower than the specs or if the
    pin configuration does not match the Cisco OEM part.

  • What is the correct part number for dvi to vga adapter for macbook pro model A1260

    Can someone tell me the Apple part number for the DVI to VGA adapter that came with a Macbook Pro model A1260? (Early 2008)
    My adapter has reached the end of useful life.
    Thanks!

    You have a MacBook Pro 15" Early 2009 (MacBook Pro 4,1)
    The Mac's port is a Dual-link DVI (VGA, Composite and S-video with adapter)
    The DVI connector  connects to the Dual link-DVI port,thus you need a DVI to VGA adapter.
    http://eshop.macsales.com/item/Micro%20Accessories/DVIVGA/
    You also can search the Apple store online for the part, but it's so basic and simple that paying more for Apple's version is just for looks.

  • Satellite P300-1A8 - Part number for AC adapter

    Hi.
    Can anyone tell me the Part Number of the AC adapter I need to buy for my Satellite P300-1A8?
    Model no: PSPCOE-01H008EN 15550/1024/1024/160G54/17W + BT/D52/L/M/W
    The toshiba site doesn't list or recognise the model, CarPhone Warehouse didn't provide me with detailed documents, and the original adapter has been stolen. Failing that, can anyone provide an email address for toshiba (I am unable to phone during their office hours).
    Or failing that, some general advice on a compatible adapter please, as I bought an adapter of the correct basic specification - 19V, 3.95A, (75W), 2.5/5.5mm connector (the PA3715E-1ACE) however it doesn't work. The toshiba site lists one other adapter of the same specs (the PA3468E-1AC3) but I am reluctant to risk buying it without being sure it is the correct one. I would be happy to buy a universal adapter but only a high quality one that will not be an electrical hazard.
    Thanks in advance for any help.
    Clare

    Hi PinkPanther.
    Thanks for the reply and the link. That was the part of the site where I found the AC adapter I thought I needed. I could just go ahead and buy the other one, but these are 70 so I really need it to charge the laptop correctly at that price.
    My main problem is that no site is recognizing my laptop model - not Toshiba or the authorized service provider - so I can't find out the exact charger online. The second problem is that I can't phone when their help line is open between 9-6pm M-F, as these are my exact work hours and I have no mobile phone reception.
    I have messaged Toshiba though their site, but I haven't received a reply, and the advantage of an email address is that I can check that it has been delivered. I will try to search for the asp now.
    And, as you say, the original AC adapter would be much better all round.
    Thanks, Clare

  • How to diagnose a broken 30 pin dock connector?

    Is there a "diagnostic" application to determine if my Iphone 4 — 30 pin dock connector is fully functional? BTW - all lint and dirt has been removed (delicately). This iPhone has been able to perform TV/video out and mirror display with a (still) fully functional 30 pin to VGA connector, VGA cable and VGA equipped monitors. This phone currently cannot perform the same task. Only other variable is a conflict with iOS 6.1.3.
    Thanks for any help.

    Hi there jsoard!
    I have a website for you that can help you with some steps for troubleshooting that may help you resolve this issue. The website is an iPhone troubleshooting assistant, and can be found right here:
    Apple - Support - iPhone - iPhone Troubleshooting Assistant
    http://www.apple.com/support/iphone/assistant/phone/
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • Satellite M50-159: What is the part number of the origanal AC power adapter

    My power adapter has broken and up until now i have been using a universal adapter but the connection is loose and takes a while for the orange light to turn on.
    My question is what is the part number of the original AC adapter that came with this laptop. I have just ordered what i thought was the correct power adapter part number was PA3468E-1AC3 but the connecter did not fit into my laptop even though the toshiba website said this power adapter was compatible.
    Please help
    Alex

    Hi dear friend,
    you had the wrong partnumber. What you need is PA3283U2ACA (K000028790) which is the right one. Heres a link where you can check the connector of the AC-adapter:
    http://www.sparepartswarehouse.com/Toshiba,Laptop,Part,K000028790.aspx
    I hope you will get what you need. :)
    Greets

  • What part number for storEdge power cables?

    I purchased a used StorEdge cabinet like the one pictured below.
    [http://imgur.com/kdnNM.png]
    No cords were included. I'm wondering:
    1. What part number is the external power cord? (red circle)
    2. What part number(s) fit the internal power connectors
    3. Would the power output of the internal connectors be sufficient/correct to distribute power to various non-sun servers?
    4. What is the purpose of the connections in the blue circle
    Thank you in advance for your help.

    You are welcome.
    This is peer to peer help forum. The only presence that HP has on it are the Admins and the Mods. Otherwise, none of us works for HP.  I suggest contacting HP Customer Service to see if the part is available.  I couldn't find it anywhere.
    Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
    Signature:
    HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
    HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
    HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
    HP Photosmart 7520 AIO
    ++++++++++++++++++
    **Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
    Intelligence is God given; Wisdom is the sum of our mistakes!
    I am not an HP employee.

  • SR520W-FE-K9 AC Adapter Replacement Part Number

    Anyone help me get the part number on the AC Adapater and US AC adapter power cable part numbers for the SR520 router? I have a customer that "lost" both and needs a replacement. Any help is appreciated. I looked all over Cisco's documentation for the part number, but could only find CAB-AC2 which only appears to be the AC power cord not the adapter.
    Thank you in advance for your help.

    Hi Michael,
    The SR520-FE uses the same power supply as the 870: PWR-850-870-WW1=
    This can be used with a 2 pin CAB-AC2 mains lead
    Hope that helps,
    Andy

  • Where can i find a  30-pin Apple connector?

    Where can i find a  30-pin Apple connector?,
    i want to connect an iwow adapter for my iphone,ipod touch and ipad but i can't find it in the apple store,
    so does anyone know where i can buy one?

    I just "Googled" the question....."Where can I find a 30-pin connector" and it linked me to a number of web sites. Try it.       http://https://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4GGHP_enU S437US437&q=where+can+i+find+an+apple+30+pin#q=where+can+i+find+an+apple+30+pin& hl=en&rlz=1T4GGHP_enUS437US437&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=y3O gTrXLC4Pk0QHNzrSFBQ&ved=0CHcQrQQ&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=cf8d5e62edefb1 0&biw=1292&bih=691

Maybe you are looking for