XAV-701HD and Galaxy S3 SCH-I535

When I connect my S3 to my XAV-701HD I get "incompatible USB device."
I assume this is going to require a firmware update for the head unit. Does anyone know if and when this is scheduled to be released?
Also, any word on the US version of Drive Link? That's probably a Samsung question (waiting on a reply from them) but thought I would ask since I'm here.
Solved!
Go to Solution.

Thank you for your post and welcome to the forums.
• The Samsung Drive Link app is required to use the MirrorLink feature. The availability of the Samsung Drive Link app will depend on the country, carrier and model number. The Drive Link app is distributed through Samsung Apps or Google Play stores.
• The firmware of your A/V Center device must start with HR. Check to ensure you have the latest firmware version:
1. Go to the Home screen on the A/V Center.
2. Select Settings.
3. Select Firmware Version.
• If the MirrorLink connection is not correctly established:
1. Disconnect the USB cable.
2. Close the Drive Link app.
3. Try to connect again.
• Close the Drive Link app after disconnecting the USB cable
The same information is included in the link posted below at the bottom of the page:
http://esupport.sony.com/US/perl/suppor ... l=XAV701HD

Similar Messages

Fix my Galaxy S3 SCH-I535... preferably now please!

Dear Verizon,
     you have ruined my phone. Luckily it is only due to shoddy programming and my device is physically just dandy... assuming your shoddy programming doesn't cause it to be physically damaged before you can fix your mistake. Speaking of your mistake, do you happen to have a time line on when you will roll out a fix for my overheating phone that takes twice as long to charge on it's original charger (if I'm lucky)? Is it possible to roll back to 4.3 and if so please attach directions and file download locations.
Thanks so much
     -O
P.S. The added OS lag is a supper sweet feature too but I'd like it removed from the update as well.

    I know its difficult to have a phone that has issues with charging ominipanzer. I'm sorry about the issues you're experiencing. We don't have an ETA for a fix for this issue but if your phone is still under warranty, we can replace it with a certified like new phone of the same model as long as your phone has no damage. Unfortunately, we are unable to push the software back to a previous version. Have you performed a factory reset on your phone since the last update? If no, please back up your data and perform the reset. Keep us posted.
KinquanaH_VZW
Follow us on Twitter @vzwsupport

Is Galaxy S3 (sch-i535) getting 4.4?

Will s3 owners be getting 4.4?

It scheduled to receive the KitKat 4.4 update, but no one knows exactly when it could happen.

XAV-701HD bought in USA change to Asian region for the radio tuner?

I bought XAV-701HD Car Head unit from Amazon USA, but bought down to Sri Lanka where I live, I wanted to have MirrorLink and a good head unit, I loved this unit as of its features and it’s a ‘Sony’. I fixed the unit on my new 2014 Subaru Forester and it works beautifully but with one exception, the radio channel spacing in this unit is in US configuration (0.3MHz gap), where in Asia this is 0.1 MHz steps. I checked the Firmware file for this unit in Asia region, its identical to the US region, so I believe the unit has the capability but some configuration sets it to US range. Pls let me know whether its possible to change this to Asia settings.

Hi,
Thank you very much for your reply. I tested as you suggested, but brief touch on teh arrow or seak does not tune in 0.1MHz steps, but in 0.2MHz steps. I got a short Video. Note here there is very strong radio station on 101.0MHz but it does not get tuned in to. In Sri Lanka most of the radio stations on even steps of 0.1MHz which I'm missing. Any help is greatly appriciated. I stil couldnt fully explore the MirrorLink as my phone dosent suport it. Eying for a Xperia Z1 LTE, still want to make sure to further invest on this head unit as I get only few radio stations
Regards,
Ruwan

XAV-701HD - No phone audio

When my XAV‑701HD receiver is used as a Bluetooth headset, no phone audio comes though any of the car speakers. Whether I make a phone call or receive a call though the receiver, I cannot hear the other person on the call. The other person can hear me, but I cannot hear them.
Using the same phone, I am able to play music over Bluetooth through the receiver and the music plays successfully over my car speakers.
The microphone jack is plugged in tight in the back of the receiver.
Any idea what is wrong?
Thanks.

Lance,
Try the steps mentioned on the below support article to resolve this issue:
http://www.kb.sony.com/selfservice/documentLink.do?externalId=C423854
If my post answers your question, please mark it as "Accepted Solution".
Thank you for your post.

Is xav-701hd unilink compatible? will it work with Mobile ES equipment such as XDP-210EQ & cd chgrs

I am interested in the Sony XAV-701HD unit for my car - a 2004 Infiniti G35 Sedan non-bose. I already have an aftermarket unit with the Metra dash kit, so I know it will fit. What I'm curious about is if this unit is compatible with the Sony accessories already installed in my car. These include:
CDX-T70MX cd changer
MDX-62 MD Changer
XDP-210EQ equalizer/signal processor
XA-C30 source selector
I believe all of these are the now defunct "Mobile ES" line, but I'd like to confirm they will work with this new unit before I purchase it. Thank you.

Hello Mr. Nix,
Welcome to the Sony Community.
Unfortunately, the CDX-T70MX; MDX-62 and XA-C30 will not work with the XAV-701HD unit.
Regards,
Charlie

XAV-701HD firmware update

I am having trouble upgrading the firmware on my XAV-701HD. I followed the instructions here:
http://esupport.sony.com/US/p/swu-download.pl?upd_id=8518&os_id=99&mdl=XAV701HD
I've downloaded the zip file and extracted it. I've copied the extracted files to a USB drive, so that BIN file is located on the USB here: /update/update/SONYXAV.BIN .I've connected the USB to my XAV-701HD.
On my XAV-701HD, in the Settings Menu under Firware Version, the current Firmware Version is displayed: HR10_xav_1.12.001
When I choose the "Update" button, the "Firmware Update Available" screen appears. It says:
New Firmware Version
HR10_xav_1.12.001 --> ---
Update system firmware?
Two buttons are below, "Cancel" and "Update". My problem is that the "Update" button is disabled and nothing happens when I tap it. Perhaps the new version of the firmware that is on the USB should be displayed instead of the three hyphens (---) on this screen, but it is not.
I've tried placing the SONYXAV.BIN file at the root level of the USB drive and also under the first /update folder, but it hasn't helped. I've also tried a completely different USB drive.
Any idea what. is wrong? Thanks for your help.
Lance
Solved!
Go to Solution.

That worked. Thanks Sam!

XAV-701HD with Note 2 and mirror link....

I have updated with jr08-xav-1.13.003 which is supposed to allow Note 2 to function with Mirror link.When I connect to one (either) of the USBs, I get USB device not supported?I don't understand.Jeff-

Before attempting to use the MirrorLink feature, be sure to update the software on your device to the latest version. Contact the support vendor for your device for more details on updating the software.
If the MirrorLink connection is not correctly established: Please try the steps below:
Disconnect the USB cable.
Close the Drive Link app.
Try to connect again.
If my post answers your question, please mark it as "Accept as Solution"

XAV-701HD Upadate for Galaxy S4

Looking to see when we can expect an update for more Samsung compatibility specifically the S4 for me.

Hello,
There is not an update we can release to fix this, Mirrorlink is an industry standard technology and should work with all phones supporting it. Other users have reported issues with the Samsung GS4 with Mirrorlink and other manufacturer's head units as well.
There may be some information on this site that can help you, Please note this is a third party website and is not affiliated with Sony.
Samsung GS4 and MirrorLink

I think my XAV-701HD is baffed.

My first problem is the radio. When i installed a 601 into a customers car today i tuned to 104.7. On his car it gave the station name as HOT 104.7. My 701 will only say 104.7. With HD radio and all that jazz shouldn't it at least give a station name? Next problem. Neither my Iphone 4s nor my wife's Samsung Galaxy S3 will play Pandora properly. The only way we can use Pandora is thru BT Audio.....and even then the name of the song never changes. The song will change but the old song name stays displayed. I tried both wired and wireless. When i try to run Pandora app on either phone it says to control app thru phone. I run Pandora on phone.....try to click app on 701.....and still nothing. My next problem is connectivity with the Samsung Galaxy S3. When i try to pair the phone to the 701, the phone locks up when you try to use it. Last time i linked it to the 701 the phone froze and was stuck on a page that wanted me to delete all my apps. I just bought this deck on December 5th and i'm in awe over all these problems. I've been an installer since 1993 and this has been my worse experience with a headunit to date. Will a firmware update help this thing? Or is mine already up to date? It has the HR in the firmware numbers. Or should i send this puppy in as defective?

Hello Chuck,
Welcome to the Sony community forums. we will break down the answers based on your questions, however it does not sound like your 701 is defective, please review below.
1. RDS/ PSD data not displaying . Will it show RDS data when playing a standard OTA radio station? and if so when you switch over to HD programming the PSD data is missing, so our question back is do you have HD installed?
2. Pandora is paired via Bluetooth, as shown on In the Operating Instructions (page 44), however it will require you to properly pair your phone (page 38). Please note you must connect the iPhone via USB as shown on the notes of page 44.
3. Concerning your Galaxy S 3 are you trying to connect using mirrorlink? please be aware Samsung has not released a firmware update to give MirrorLink capability to the U.S. version Samsung Galaxy S3. Compatibility with MirrorLink is dependent on the smart phone (i.e, the smart phone manufacturers), not strictly on the firmware of the 701HD Headunit.
This link from the car connectivity consortium is for the International version of the Samsung galaxy S3 and will not work on the US version. If you have downloaded it and you have a US model S3 it will not work
http://cert.mirrorlink.com/ProductListing/?MLID=SR120010
Please contact Samsung to ask if they plan on releasing a version for the United States.
Hope that helps answer some of your questions, however concerning the display, it may be your settings and for that we would suggest calling in as there are many diffrent outcomes depending on what settings you have and the conditions.

Verizon Webmail site will not load on Samsung Galaxy Tab SCH-1800

Is there some compatibility issue with Verizon's Webmail site and the Galaxy Tab? In the past I have easily been able to access my Webmail account directly with the browser on my Galaxy Tablet. But over the past year or so, that access has gone away. At first I was told to download the FiOS app to my tablet. That worked for about 6 months. Now even the FiOS app does not work. When I type any version of the "netmail.verizon.net" or "webmail.verizon.net" or "myverizon/webmail.net" I get redirected to the Home Verizon page. From there, I don't get any login links and thus I can not access my email root server from this tablet. I've called Customer Support on numerous occassions but nobody seems to have any clue why this is happening. Does anybody know if there is some compatibility issue with this old tablet and the website? Perhaps the platform is no longer supported, or the Android OS is too old?? Very frustrating that nobody can answer this simple question.

Samsung is usually late to the party.. no real info but i know most of their devices are last to get any updates

HP Deskjet 2540 and Galaxy Tab 3 - cannot print wirelessly

Hello
I would be very grateful for help with the following issue.
I have an HP Deskjet 2540 and a Galaxy Tab 3 (Android) and wish to print wirelessly from the tablet.
I have installed the ePrint app and the ePrint All-in One Remote app on the tablet.
In order to print I have to change the tablet's wifi connection from my home wifi to the printer's wifi which means that I cannot print straight from the internet.
I have tried saving web pages and then printing i.e not using the home wifi but a message appears on the tablet saying " Connect to Samsung printer".
My question is therefore, how do you print when you can only have one wireless connection on the tablet at a time i.e either the home wifi or the printer? Every time I want to print, do I have to change the wifi connection on my tablet from my home wifi to the printer's?
Many thanks in advance!

Hi Sujo,
Welcome to the HP Support Forums. I gather that you are unable to print web pages from your Android Galaxy Tab 3 tablet because you are using the printer’s wireless direct feature which does not have internet connectivity.
Let’s get the printer connected to your home wireless network. If you have a computer running a Window or Mac operating system it’s fairly easy to connect the printer. Please follow the steps in the Installing the Printer Software for a Wireless Network Connection document for the operating system that is running on your computer.
If you only have your tablet available, please follow the steps in the post by @Jon-W titled “How can I setup a Deskjet 3050a/J611 to my Chromebox?”. Please start where he says “There is another alternative but it can be hit or miss”.
Once you have the printer connected to your wireless network you should be able to print web pages as both devices will now be connected to your wireless network. Please let me know how it goes.
Regards,
Happytohelp01
Please click on the Thumbs Up on the right to say “Thanks” for helping!
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
I work on behalf of HP

Macbook and galaxy note 2

trying to get macbook to recognize galaxy note 2,need alot of help

Because I've used both the Windows and Mac operating systems, and I prefer Mac OS X

Flash and Galaxy phones! Need HELP PLEASE!

Is there a way to download Flash Player on my galaxy phone even though it says it is not supported? My son is home schooled and all of his programs need flash to be able to work. Please tell me there is a way to get around this!?

How to Install Adobe Flash Player on Your Samsung Galaxy S3 to Play Flash Videos & More « Samsung Galaxy S3

Sony XAV-701BT and navigation module

Can anyone tell me if the Sony XA-NV200TL (navigation module) is compatible with the headunit XAV-701BT?
I have purchased both, but connecting the module with USB to the 701BT gives me no "navigation" in the menu.
Or do I need another firmware, the firmware I have now is HR13_xav_1.12.001.
Can someone please help me out?
Solved!
Go to Solution.

Thanks for your reply, but I'm not satisfied yet.
Why is it that on different websites I can read that the 701BT is "Navigation ready", the same as the 701HD.
Can you tell me if this would work :
(XAV-67 accessory required for navigation - sold seperately)
http://www.sony.com.sg/pressrelease/asset/528538/section/productpressreleases
http://purpleflytrading.co.za/shopping/index.php?main_page=product_info&cPath=297_92410&products_id=...

XAV-701HD and Galaxy S3 SCH-I535

Similar Messages

Maybe you are looking for