Xbmc issues using sky fibre?

I was on sky normal broadband and used the xbmc via box and pc but found watching some items at 1020p would cause issues, buffering.I moved to sky fibre and now find the films stream ok, but when i use the kodi to watch 3D films or other content these will now not load, but before was fine.Is fibre got any security issues with these sites or links.

It's very dependent on what time of the day you access the content because of the sites the host the material, the early evening to 10pm is the worst for buffering issues, even for those using hybrid fibre. Do ensure you are using the latest release of kodi, which is 14.2 and try the genesis addon, as that's rather a good addon and offers lots of sources for streaming to kodi. You can also tweak the buffers by adding settings to advancedsettings.xml, instructions for doing so can be found by sesrching on Google.

Similar Messages

Issues using 887 when authenticating with MER on a Fibre connection

Hello All
I've been battling for a week now to get the config correct for Cisco 887VA.
I understand Sky use MER to authenticate, however, in order to create the PPP connection, I am using PPPoE without passing any authentication, other than the username|password through option 61 (and vendor information on option 60).
I have Wiresharked the provided Sky router SR102 to obtain DHCP option 60 and 61 information and have entered these as hex values in the dialer interface.
I have also spoofed the SR102 MAC address on the dialer interface.
I have created a sub interface on e0, using dot1q to tag traffic to VLAN 101
I can indeed see traffic on interface e0.101 but the dialer receives NO ip address.
I can also see the modem is connected and in sync.
Am I correct in assuming the e0.101 interface is equivalent to the WAN connection on a seperate modem?
Config is below - please ignore local IPs, etc
version 15.1
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
hostname ******-ADSL
boot-start-marker
boot-end-marker
no logging buffered
enable secret 5 *********
aaa new-model
aaa authentication login default local
aaa authorization exec default local
aaa session-id common
memory-size iomem 10
clock timezone BST 0 0
clock summer-time BST recurring last Sun Mar 2:00 last Sun Oct 3:00
crypto pki token default removal timeout 0
crypto pki trustpoint TP-self-signed-1112313640
enrollment selfsigned
subject-name cn=IOS-Self-Signed-Certificate-1112313640
revocation-check none
rsakeypair TP-self-signed-1112313640
crypto pki certificate chain TP-self-signed-1112313640
certificate self-signed 01 nvram:IOS-Self-Sig#1.cer
ip source-route
ip cef
ip domain name vdsl.******.net
ip name-server 8.8.8.8
no ipv6 cef
multilink bundle-name authenticated
archive
log config
hidekeys
username admin privilege 15 secret 5 *********
controller VDSL 0
no ip ftp passive
ip ssh authentication-retries 5
ip ssh version 2
interface Ethernet0
no ip address
interface Ethernet0.101
encapsulation dot1Q 101
pppoe-client dial-pool-number 1
interface ATM0
no ip address
shutdown
no atm ilmi-keepalive
interface FastEthernet0
no ip address
interface FastEthernet1
no ip address
interface FastEthernet2
no ip address
interface FastEthernet3
no ip address
interface Vlan1
ip address 1.1.1.1 255.255.0.0
ip flow ingress
ip flow egress
ip nat inside
ip virtual-reassembly in
interface Dialer1
mac-address ****.****.**38
mtu 1492
ip dhcp client request classless-static-route
ip dhcp client client-id hex <<HEX STRING>>
ip dhcp client class-id hex <<HEX STRING>>
ip address dhcp
no ip redirects
no ip proxy-arp
ip flow ingress
ip nat outside
no ip virtual-reassembly in
encapsulation ppp
ip route-cache policy
dialer pool 1
dialer-group 1
ppp ipcp dns request accept
ppp ipcp route default
ppp ipcp address accept
no cdp enable
router ospf 1
router-id 1.1.0.1
network 1.1.0.1 0.0.0.0 area 0
default-information originate
ip forward-protocol nd
ip http server
ip http access-class 1
ip http authentication local
ip http secure-server
ip flow-cache timeout inactive 10
ip flow-cache timeout active 5
ip flow-export version 9
ip flow-export destination 1.1.1.1 9991
ip flow-export destination 1.1.1.1 9991
ip nat inside source list NATACL interface Dialer1 overload
ip access-list standard NATACL
permit 1.0.0.0 0.255.255.255
logging esm config
access-list 1 permit 1.0.0.0 0.255.255.255
dialer-list 1 protocol ip permit
control-plane
banner motd ^CCCCCCCCC
*****************AUTHORISED USERS ONLY*****************
^C
line con 0
password 7 ***************
line aux 0
password 7 ***************
line vty 0 4
session-timeout 10
exec-timeout 0 0
timeout login response 300
transport input ssh
scheduler max-task-time 5000
end
Many thanks

Chris,
Just wondering if you managed to get anywhere with this, or just gave up? I'm a Sky Fibre user, sadly using the bundled "Sky Hub" (aptly named, as I consider "Layer 1 Network Hubs" to be just as gash as this ), and have battled with the MER DHCP-based authentication before.
Previously, I was experimenting using a Cisco Linksys E2400 (or E4200, I forget) running Tomato USB Firmware and was getting frustrated with the hex settings.
I notice in your configs you posted the following strings, which look like they are trying to send the DHCP Vendor ID/Options that MER needs:
ip dhcp client client-id hex <<HEX STRING>>
ip dhcp client class-id hex <<HEX STRING>>
For your specified <<HEX STRING>> were you also appending the necessary "0x3d" (61) to your custom-generated User+Pass hex (i.e. full string reads "0x3d<<USER+PASS HEX>>")?
Sources as below, but curious if this could fix it?
Sources
http://www.skyuser.co.uk/forum/technical-discussion/46464-skys-mer-why-does-not-work-other-routers-22.html
https://www.cm9.net/skypass/index.cgi

Switching from BT Infinity 2 Unlimited. Worth it? Is Sky Fibre Pro still available?

Hi all I'm currently on BT Infinity 2 Ulimited, but I've become less than satisfied with the speed on my line. I know the line is capable of around 60MB/s as that is what the tests were indicating when the engineer was round to install the service. However it has slowly deteriorated over time and now sits at just over 40MB/s. BT are beyond useless and will not accept that this is an issue, let alone try and fix it. Has anybody recently switched from BT Infinity to Sky Fibre? How is the upgrade process? And has this generally improved or worsened your speeds? Lastly, I can't for the life of me find this Sky Fibre Pro (up to 80MB/s) service on the Sky website anyway. Google results seem to take me to 404 pages. Is Pro still available, and if so where do I order it? If all Sky offer is an "up to" 38MB/s service, then I won't be switching. I have no desire to make my speeds worse still. Thanks a lot.Ryan

First thing to remember is that Sky Fibre will still use the same cabinets and cables to get to your house, so changing provider will not necessarily make any difference, although the physical moving of the cables may make things better, but may also make things worse.
Deterioration is an unfortunate side effect of more and more people using fibre and the crosstalk between cables.
Sky Fibre Pro is still available but you can't sign up online, only by calling Sky.

Not able to use sky drive pro for sharepoint 2013

Hi Friends,
recently i have updated my sharepoint farm to sharepoint 2013 from sharepoint 2010.. due to some reasons I have not visually upgraded a site to sp2013 visual effects but all other sites have been visually upgraded. now, when I try to sync the doc lib
of the site(which is not visually upgraded) I get an error saying this site is running in sp2010 mode hence we cannot sync this doc lib using sky drive pro....I tried to sync it using sharepoint workspace also but still no luck.can any one help me?
this same doc lib is getting synced to my friend system but not my system.i dunno why.please help

Hi,
Yes, it is expected that we cannot sync SharePoint 2010 sites (non-upgraded) with Sky Drive Pro because of the October 2013 update to SkyDrive Pro (KB2825633). However, it should be OK with Sharepoint Workspace.
I will have a test to check how to sync in this scenarios. In the meanwhile, you can also create a service request with Microsoft on this product issue and they will provide fast help.
SkyDrive Pro update enforces SharePoint version requirement
http://blogs.technet.com/b/sharepointclient/archive/2013/11/06/latest-skydrive-pro-update-enforces-sharepoint-version-requirement.aspx
You can't sync a SharePoint 2010 library to OneDrive for Business 2013http://support.microsoft.com/kb/2904784
Miles LI TechNet Community Support

Vodafone Sure Signal and SKY Fibre Optic Broadband

Please help, I have had no Mobile Phone signal for over 6 weeks on four mobile phones at home (which we pay over £150 a month for!) including my two teenage daughters phones who are beside themselves!!My Vodafone sure signal box was working fine (for past two years or more)but stopped working when we switched to SKY Fibre optic broadband from regular SKY broadband I have spoken to Vodafone and SKY for many many hours but still no signal. I'm tempted to ditch both SKY and Vodafone and start fresh with BT!!, this would be such a shame as been with both companies for over 15 years now I have no idea what I need to do to fix this, we have tried Port Forwarding but still no signal. Please help, I am in a mobile blackspot and its driving me cand the family mad.

Although not specifically about Sky Fibre, this (although a bit technical) is an interesting read (in particular the post at 21-Oct-14 10:41:23 advising to de-register the SS via the VF website, wait 30 mins then re-register the SS using a different postcode and if no luck contact VF and ask them to reset the SS from their end). For what it's worth, the Three Home Signal Box works fine over Sky Fibre without any port forwarding or any nonsense - just plug and go - worth knowing if you should decide to switch mobile providers!

Migrating away from Infinity to Sky fibre unlimite...

Hello all,
BT Infinity has been pretty decent this past year, but with the price rises due in Jan, I'm strongly considering cancelling my service and moving to Sky for their Sky fibre package. I know all the fibre is managed by BT anyway, so there wont be any difference in service, and it's really more of a cost issue than a service issue. We will also be getting the HD TV package and phone bundle, and it all works out at a much better price than we are currently paying for each service separately.
Does anyone know exactly how the migration process from one FTTC ISP to another works? Is it a similar process to ADSL migrations, in which you're given a MAC code and a time period for cancellation? Or is it much more complicated to migrate on a fibre connection without a loss of service for a long period of time?
Any tips would be much appreciated.

you will only benefit from infinity2 if your infinity1 connection can max out the speeds, if you cannot get the max infinity1 speeds then that is the max your line can do, going to infinity2 will not make it faster as you have already reached the max your line can do

BT Fibre. TalkTalk Fibre, Sky Fibre...

At the moment I'm with BT Infinity I am getting a constant speed of 74Mb/s and 18Mb/s. Me and my friend were saying if you went to TalkTalk Fibre, Sky Fibre or Plusnet Fibre you would get exactly the same speed because its using BT's lines, is this right?

I could be wrong but I don't think it can be guaranteed you would get the same because I believe they us different kit at the exchange which may have an effect on your speed.

How to using Virtual fibre channel feature in IC 3.5?

Hi ,guys ,i have noticed that microsoft released IC 3.5 to support virtual fibre channel in redhat and centos linux.
the links are:
http://technet.microsoft.com/en-us/library/dn531026.aspx
http://blogs.technet.com/b/virtualization/archive/2014/01/02/linux-integration-services-3-5-announcement.aspx
in these links above ,notes 2 says:
While using virtual fibre channel devices, ensure that logical unit number 0 (LUN 0) has been populated. If LUN 0 has not been populated, a Linux virtual machine might not be able to mount fibre channel devices natively.
but I do not understand how to ensure logical unit number 0 has been populated ,anyone who have tested such new features please share your expirence , thank you very much.
yoke88
IM：[email protected]

The same issues as yours,no HBA card can be seen
I have tried the command here to list hyper-v virutal fiber channel card in oracle linux 6.5 ,but no luck,and EMC powerpath does not support UEK r3 which was installed default on OL 6.5 X64,I will try Oracle linux 6.3 with IC 3.5
http://mikent.wordpress.com/2012/02/07/how-to-find-wwn-of-hba-on-redhat-6-x/
[root@computer01 ~]# uname -a
Linux computer01.localdomain 3.8.13-26.1.1.el6uek.x86_64 #2 SMP Thu Feb 13 19:42:43 PST 2014 x86_64 x86_64 x86_64 GNU/Linux
[root@computer01 ~]# lspci -nn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (AGP disabled) [8086:7192] (rev 03)
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA [8086:7110] (rev 01)
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE [8086:7111] (rev 01)
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 02)
00:08.0 VGA compatible controller [0300]: Microsoft Corporation Hyper-V virtual VGA [1414:5353]
[root@computer01 ~]# fdisk -l
Disk /dev/sda: 53.7 GB, 53687091200 bytes
255 heads, 63 sectors/track, 6527 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000896c0
   Device Boot      Start         End      Blocks   Id System
/dev/sda1   *           1          64      512000   83 Linux
Partition 1 does not end on cylinder boundary.
/dev/sda2              64        6528    51915776   8e Linux LVM
Disk /dev/mapper/vg_computer01-lv_root: 49.0 GB, 48964304896 bytes
255 heads, 63 sectors/track, 5952 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
Disk /dev/mapper/vg_computer01-lv_swap: 4194 MB, 4194304000 bytes
255 heads, 63 sectors/track, 509 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00000000
[root@computer01 ~]# lsmod |grep hv
hv_netvsc              21641 0
hv_utils                7440 0
hv_balloon              9843 0
hv_storvsc             10236 2
hv_vmbus               92011 5 hid_hyperv,hv_netvsc,hv_utils,hv_balloon,hv_storvsc
[root@computer01 ~]# modinfo hv_vmbus
filename:       /lib/modules/3.8.13-26.1.1.el6uek.x86_64/kernel/drivers/hv/hv_vmbus.ko
version:        3.1
license:        GPL
srcversion:     8BAC864516830DFFF7DC2B1
alias:          acpi*:VMBus:*
alias:          acpi*:VMBUS:*
depends:
intree:         Y
vermagic:       3.8.13-26.1.1.el6uek.x86_64 SMP mod_unload modversions
using microsoft virutal fibre chanel trouble shooting guide ,i see the event logs indicate the VHBA card was successfully added to the vm.
yoke88
IM：[email protected]

Disgusted with SKY FIBRE!

I have been told because my stats are 40/10 I cannot revert back to sky broadband unlimted this I thought about doing as the up and download speed on sky fibre after being brill for a month or so is now sooooo slow I cannot even use the on demand service from sky, sent them all my stats and download speed test etc told them its not a virus or operating system fault as I get the same poor rubbish service to my sky box also. It is beyond me that its my fault it really is.

please ignore my question, as soon as i posted it i found other threads providing the answer.
Cheers, Neil

Sky Fibre constant drop out and low speed

Hi everyone,
Just recently switched provider from Plusnet fibre to Sky fibre and boy, has it been a stressful few days. First off, our fibre went live on the 6th of this month but these last couple of days I've been experiencing low speeds between 10-20 mb which I understand is meant to be normal (Never had this issue when I joined plusnet) and I have constant drop outs when I'm surfing the net or playing internet games on my Wii U
I've phoned Sky within the last two days and told them what's going on and they've done some tests on their end and they are telling me that I'm getting speeds up to 41 mb which I'm not getting, but they can't seem to understand why I keep having this drop out issue with my devices and my laptop and my gaming console. They have sent me a new hub, but I personally don't think sending out a new hub will make a difference. I've stuck a a Ethernet cable into my Sky fibre router and attached a openreach router, to the other end and see if that stops the drop out.
I'm inclined to leave sky, because I have a feeling this poor service will continue, unless someone can help me.
Thanks

Jan 1 00:00:07 syslog: BusyBox v1.17.2
Jan 1 00:00:16 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:24 syslog: Line 0: VDSL G.993 started
Jan 1 00:00:31 syslog: Line 0: VDSL2 link down
Jan 1 00:00:34 syslog: Line 0: xDSL G.994 training
Jan 1 00:00:42 syslog: Line 0: VDSL G.993 started
Jan 1 00:01:01 syslog: Line 0: VDSL2 link up, Bearer 0, us=9995, ds=39998
Jan 1 00:01:04 syslog: ptm0.1 - WAN link UP.
Jan 1 00:01:04 syslog: Received valid DHCP lease from server. Connection UP.
Jan 1 00:01:04 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.97.46]
Jan 1 00:01:05 syslog: Send out NTP request to ntp1.isp.sky.com
Jan 1 00:01:05 syslog: Time has been set from ntp1.isp.sky.com
Aug 9 00:05:11 syslog: Received NTP Sync Reply from ntp1.isp.sky.com
Aug 9 00:11:49 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:11:56 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:11:57 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:04 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:06 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:08 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:09 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:21 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:22 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:23 syslog: eth2 (switch port: 1) Link DOWN.
Aug 9 00:12:24 syslog: eth2 (switch port: 1) Link UP 100 mbps full duplex
Aug 9 00:12:32 syslog: Line 0: VDSL2 link down
Aug 9 00:12:34 syslog: Clear IP addresses. IP connection DOWN.
Aug 9 00:13:41 syslog: eth2 - WAN link UP.
Aug 9 00:13:41 syslog: Received valid DHCP lease from server. Connection UP.
Aug 9 00:13:41 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 00:19:01 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 00:47:49 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 01:22:53 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 01:51:41 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 02:24:57 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 02:54:57 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 03:00:00 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 03:32:58 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 04:07:26 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 04:39:12 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:11:16 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:37:04 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 05:37:05 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 06:01:57 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 06:30:27 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 06:54:27 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 07:27:25 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 08:01:35 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 08:25:35 syslog: Send out NTP request to ntp1.isp.sky.com
Aug 9 08:28:51 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]
Aug 9 09:04:13 syslog: Connection Up. SNO/MAC/IP: [A502155D006292/C03E0F9F81C4/151.231.102.13]

Is there an issue using file vault 2 on a Mac fusion drive

is there an issue using file vault 2 on a Mac fusion drive

I'm using that configuration and it works for me. There have been some reports of kernel panics with FileVault and SSD's. The cause is unknown. Chances are you'll be fine, but make good backups.

Goods Issue using BAPI_GOODSMVT_CREATE movement type 541

Hi
According to my requirement I need to do Post goods issue using BAPI_GOODSMVT_CREATE. But I am unable to do PGI . how to consume BOM details if batches are changed. please let me know what values I need to pass to BAPI . give with an example.
Its an urgent requirement.

are you passing batch number to the BAPI?
if not try pass the batch number the rest of the things bapi will take care of.
bi

Post Goods issue using bapi_goodsmvt_create

hi,
Iam trying to do post goods issue using bapi_goodsmvt_create. please let me know what are the mandatory fields to be passed?

hi,
*& Report ZRPT_SUB_KO01GOODSMOVEMENT
REPORT ZRPT_SUB_KO01GOODSMOVEMENT.
PARAMETERS : P_BAG(17) TYPE C,
             P_ZZORG LIKE zaUFK-ZZORG,
             P_MATNR LIKE MARA-MATNR,
             P_WERKS LIKE AUFK-WERKS,
             P_WERK LIKE AFPO-PWERK,
             P_DATE LIKE MKPF-BUDAT,
             P_LGORT LIKE GOITEM-LGOBE.
DATA : BDC_DATA TYPE STANDARD TABLE OF BDCDATA. "internla table for bdc data
DATA : WA_BDC_DATA TYPE BDCDATA .                "work area for bdc data
DATA : T_XMSEG TYPE   MSEG.
DATA : T_XMKPF TYPE MKPF.
DATA : V_BAGS1(17) TYPE C.
DATA : BEGIN OF WA_MB1B,
       ZZGCODE TYPE ZMIGO-ZZGCODE,
       ZZGBAGS TYPE ZMIGO-ZZGBAGS,
       WERKS TYPE AUFK-WERKS,
       LGORT TYPE VBRP-LGORT,
       ZZORG TYPE zAUFK-ZZORG,
       END OF WA_MB1B.
DATA : V_MATERIAL TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
data : v_date(10) type c.
DATA : T_GOODSMVT_HEADER TYPE BAPI2017_GM_HEAD_01,
       T_GOODSMVT_CODE TYPE BAPI2017_GM_CODE,
       T_GOODSMVT_ITEM TYPE STANDARD TABLE OF BAPI2017_GM_ITEM_CREATE,
       T_RETURN LIKE BAPIRET2 OCCURS 0 WITH HEADER LINE.
DATA : WA_GOODSMVT_ITEM TYPE BAPI2017_GM_ITEM_CREATE.
DATA : BEGIN OF S_MARA,
       MEINS LIKE MARA-MEINS,
       END OF S_MARA.
DATA : MATERIALDOCUMENT TYPE BAPI2017_GM_HEAD_RET-MAT_DOC.
*FORM GOODSMOVEMENT TABLES T_RETURN
                         USING WA_MB1B LIKE WA_MB1B.
SELECT SINGLE MEINS
               FROM MARA
               INTO S_MARA
               WHERE MATNR = P_MATNR.
   CONCATENATE p_date6(2) p_date4(2) p_date+0(4) INTO V_DATE SEPARATED BY '.'.
    T_GOODSMVT_HEADER-PSTNG_DATE = P_DATE.
    T_GOODSMVT_HEADER-DOC_DATE = P_DATE.
    T_GOODSMVT_CODE-GM_CODE = '04'.
    WA_GOODSMVT_ITEM-MATERIAL =      P_MATNR.                    "'000000000000001556'.
    WA_GOODSMVT_ITEM-PLANT =        P_WERK.                     " '1000'.
    WA_GOODSMVT_ITEM-STGE_LOC =      P_LGORT.                    " '0001'.
    WA_GOODSMVT_ITEM-MOVE_TYPE =     'Z42'.
    WA_GOODSMVT_ITEM-VENDOR =         P_ZZORG.                   "'0000100224'.
    WA_GOODSMVT_ITEM-ENTRY_QNT =      P_BAG.                   " '1'.
    WA_GOODSMVT_ITEM-ENTRY_UOM =     S_MARA-MEINS.
    WA_GOODSMVT_ITEM-ENTRY_UOM_ISO = S_MARA-MEINS.
    WA_GOODSMVT_ITEM-MOVE_PLANT = P_WERKS.
    APPEND WA_GOODSMVT_ITEM TO T_GOODSMVT_ITEM.
CALL FUNCTION 'BAPI_GOODSMVT_CREATE'
EXPORTING
      GOODSMVT_HEADER          = T_GOODSMVT_HEADER
      GOODSMVT_CODE            = T_GOODSMVT_CODE
IMPORTING
    MATERIALDOCUMENT           = V_MATERIAL
TABLES
      GOODSMVT_ITEM            = T_GOODSMVT_ITEM
RETURN                        = T_RETURN.
BREAK shailajaa.
           EXPORT t_return to MEMORY ID '123'.
           EXPORT V_MATERIAL TO MEMORY ID 'MAT'.
            CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'
     EXPORTING
       WAIT          = ' '.
*ENDFORM.

Can't send e-mails via Mail with a Gmail e-mail address using Sky internet

Can anyone help? My brother has an iBook G4 Mac OS X 4.1 and is trying to send e-mails via Mail with a Googlemail e-mail account. He is using Sky for his broadband. I assume it has something to do with his outgoing smtp e-mail Preferences in Mail, but for the life of me I can't figure it out. He can receive e-mails OK, its just that when he tries to send he gets the 'server can't send error'. Any ideas?

Here's my gMail IMAP SMTP settings...
smtp.gmail.com
Port 25
Authentication: Password
SSL
Sky may require another port to pass through...
IMAP is port 143
IMAP-SSL is port 993
POP is port 110
POP-SSL is port 995
SMTP and SMTP-SSL is on ports 25, 587 and 465. Port 587 has to be SSL, and port 465 is enforced TLS-wrapped and is generally used by Outlook users.

I have an issue using Lighting Effects in Adobe Photoshop CC 2014

Hello everyone,
I am having issues using Lighting Effects in Adobe Photoshop CC 2014. I created a duplicate layer that I want to do the effects on, converted it to a smart object and on that same layer went to Filter>Render>Lighting Effects to get to the Lighting Effects screen. When adjusting the parameters (drag/reshape the lights) for either the spotlight or point light, I don't see any changes. Can someone tell me what could be the issue or if I'm doing the steps wrong to apply the effects?
Here are my specs:
Operating System: Windows 7 Home Premium 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.140303-2144)
Processor: Intel(R) Core(TM) i7-2600S CPU @ 2.80GHz (8 CPUs), ~2.8GHz
Memory: 8192MB RAM
Available OS Memory: 8174MB RAM
Card name: AMD Radeon HD 6570
Manufacturer: ATI Technologies Inc.
Display Memory: 743 MB
Dedicated Memory: 1008 MB
Shared Memory: 3831 MB

I am experiencing flickering issues as well. However my issues are with the Fast Color Corrector and the Three Way Color Corrector. It seems as if the color correction tools are causing intermittent flickering on some people's systems.
Additionally when I converted some old PPCC 7.2.2 projects which had the Three Way Color Corrector applied, some clips in sequences would come up as a green screen in the program monitor. If I turned the TWCC off the footage would display correctly in the program window. If I turn the TWCC back on it would display the green screen again.
I haven't found a solution to the flickering but to solve the green screen issue I have to remove the effect, then re apply it. I guess for whatever reason, the 2014 version of PP has issues with 7.2.2 projects where the TWCC was applied.
I'm hoping Adobe will address this soon with an update for the various bugs that have been reported.
PPCC 2014 8.0.1
Win 7 Pro

Xbmc issues using sky fibre?

Similar Messages

Maybe you are looking for