Xbox 360 controller help

I was wondering if there was anyway I could use an Xbox 360 controller on my mac? I cant install anything to the hard drive since its a school computer but I still want to be able to play on my emulator with a controller.

Xbox settings :-
Please click on the tab "Application and gaming" and click on sub
tab "Port range forwarding"
1) On the first line in Application box type in "Xbox", in start box
type in 88, in end box type in 88, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
2)   On the second line in Application box type in "Xbox", in start box
type in 3074, in end box type in 3074, in protocol keep it both, in ip
address type in 192.168.1.20 and give a check mark on enable box.
3) Now save the settings
4) Once you return to the setup page, click on the tab "Administration"
and disable the UPNP and save the settings.
5) Now assign the given ip address on your xbox
   ip address :- 192.168.1.20
   subnet mask :- 255.255.255.0
   default gateway :- 192.168.1.1
Please assign the dns address on the xbox
primary dns :- 4.2.2.2
secondary dns :- 192.168.1.1
6) Please try to test your xbox live.

Similar Messages

Trouble Connecting a Wireless Xbox 360 Controller to Windows 8.1 via the Play & Charge Kit

I've been trying to connect a standard black wireless Xbox 360 controller to my PC, a Dell Inspiron 17R Special Edition (what makes it special is a mystery to me, but that's the name) with the standard Play & Charge Kit.
I downloaded the drivers from Microsoft's website <http://www.microsoft.com/hardware/en-us/d/xbox-360-wireless-controller-for-windows>. Since there was no version for Windows 8.1, I downloaded the version for windows 7 (64-bit) and ran the installer
in compatibility mode. The installer ran just fine, and I was able to run joy.cpl with no trouble. The trouble was, my controller doesn't show up in the list of game controllers, which is blank.
Under Devices and Printers, an item named "Xbox 360 Wireless Controller via Play and Charge Kit" appears in the "Unspecified" category. When I look at the properties of this device, there are only two tabs, "General" and "Hardware".
Under the "Hardware" tab, there is a device also named"Xbox 360 Wireless Controller via Play and Charge Kit" whose properties have all the proper drivers and suchlike.
Help!

Uninstall all the driver.
Download and install the latest driver,or,you may try the same to get via Windows Update.
You may post here:
http://forums.xbox.com/
S.Sengupta, Windows Entertainment and Connected Home MVP

[solved] Xbox 360 Controller (wired) as mouse

So I'm mouseless but have an unused Xbox 360 Controller. How can I get it to function as a mouse?
ls /dev/input gives:
by-id by-path event0 event1 event2 event3 event4 event5 js0 mice mouse0
and dmesg gives:
usb 3-1: new full speed USB device using ohci_hcd and address 2
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1c.1/usb3/3-1/3-1:1.0/input/input5
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
I've run the usual gamut of google/forum searches to no avail. Seems that most people who do have their controllers functioning as a mouse are looking for ways to disable the behavior. As always, thanks for the help.
-jd
Update: Found qjoypad which does the trick
Last edited by ntness (2010-04-26 04:54:09)

So I'm mouseless but have an unused Xbox 360 Controller. How can I get it to function as a mouse?
ls /dev/input gives:
by-id by-path event0 event1 event2 event3 event4 event5 js0 mice mouse0
and dmesg gives:
usb 3-1: new full speed USB device using ohci_hcd and address 2
input: Microsoft X-Box 360 pad as /devices/pci0000:00/0000:00:1c.1/usb3/3-1/3-1:1.0/input/input5
usbcore: registered new interface driver xpad
xpad: X-Box pad driver
I've run the usual gamut of google/forum searches to no avail. Seems that most people who do have their controllers functioning as a mouse are looking for ways to disable the behavior. As always, thanks for the help.
-jd
Update: Found qjoypad which does the trick
Last edited by ntness (2010-04-26 04:54:09)

Xbox 360 controller works in mate desktop but not DWM?

Hello,
I just switched to DWM from mate desktop. I use my xbox 360 controller with steam home streaming. Worked perfectly under mate but it doesnt work at all in DWM.
The xbox controller light is on in dwm and I can confirm it still works under mate. I tried installing xf86-input-joystick but no joy. (didnt need this under mate)
Anyone know what makes this work in mate desktop or how to make it work in dwm?
Many Thanks.
PS: Don't know if it helps but my .xinitrc is just a copy of /etc/skel
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
setxkbmap gb &
exec dwm
#exec mate-session

I installed this driver:
http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/OsxDriver
And now my MBP reliably recognizes the controller (evident by it showing me what commands it is receiving in the preference pane created by this driver), but I've found that getting an individual game to behave nicely with the controller is a whole other ball of wax...good luck.

Xbox 360 controller (wired) and compatability with Windows 7

Ok, here's the scoop. I have an Xbox 360 controller and a plug 'n play kit for it. I have tried the normal solutions for hooking it up and getting it to recognize in Windows 7 (32 bit) Home Prem. Edition, and all I get is it is an 'Unspecified' device in the Control Panel, and as a result, it will not be recognized in games as a controller, and will not work. I have installed the proper drivers and the 360 Accessories for Windows, but even that doesn't recognize the controller when it is plugged into my USB 2.0 port. The driver is properly installed (Windows told me the driver was installed correctly when I first plugged in my controller, after installing the program from the Microsoft website), so I have no idea why it is not working. I have followed all the stepd that I can find. Please give me some assistance.

If you already have the software installed, go to programs and features and uninstall Microsoft XBOX 360 Accessories 1.2.
1) Download the drivers from http://www.microsoft.com/hardware/download/download.aspx?category=gaming
2) Choose Gaming > Xbox 360 Controller for Windows > Windows 7 64 bit > English.
Don’t run the drivers. Save them to a folder.
(Or Xbox 360 Wireless Controller for Windows depending on your controller)
3) Right click the Xbox360_64Eng file in the folder you downloaded to and click "create shortcut"
4) Right click the shortcut you created. Select properties.
5) On the compatibility tab in properties, click "Run this program in compatibility mode"
Choose Windows Server 2008 Service Pack 1 as the compatibility mode. Apply setting and click ok.
6) Right Click on the shortcut and select "Run as administrator"
7) With your controller plugged in go to Device Manager.
You should see Microsoft Common Controller for Windows Class. It located under Mice and other pointing if you do, you have arrived. If you don't, try this.
Continue only if you don’t see Microsoft Common Controller for Windows Class in Device Manager
8) Right click the unknown device that shows a problem.
9) Update Driver Software > Browse My computer for Driver Software > Let Me Pick from a List of Drivers
10) Choose Microsoft Common Controller for Windows Class > XBOX 360 Wireless Receiver for Windows
Ignore the warning.
Should work now.
Please help :( It's still not working! Your suggestions helped almost everything. I don't think there was the Microsoft Common Controller for Windows class/Xbox 360 Wireless Controller via Play and Charge Kit in Device Manager before I tried
your tips of reinstalling under that old service pack compatibility mode.
Now that I see that, I thought it'd be fixed... but no! If I run joy.cpl (the Game Controllers window) it still doesn't see my Xbox controller. It still isn't recognized by the actual 360 controller software for my PC.
I did try updating the drivers again in the device manager, and I am plugged into a Blue USB port. What else? Is it something to do with my battery pack or something? Help!!
I don't know if this will notify me of a response, so please feel free to email me at smorin1487 @ gmail

Xbox 360 Controller not recognized by Macbook.

I just bought an xbox 360 controller to play games with it while programing it through a software. When I first plug it in, the Mac recognizes the controller. If I unplug it and then plug it in again, the 360 controller lights will flash, but it won;t recognize it. If I restart my computer, plug it in, its fine again. Now, if I plug it in, it works, un plug it, but plug it into a different usb port, it will work again. Once I've used one port, it won't work with it and will have to restart my Mac. Any help would be great, Thanks!

I installed this driver:
http://tattiebogle.net/index.php/ProjectRoot/Xbox360Controller/OsxDriver
And now my MBP reliably recognizes the controller (evident by it showing me what commands it is receiving in the preference pane created by this driver), but I've found that getting an individual game to behave nicely with the controller is a whole other ball of wax...good luck.

How can i use my xbox 360 controller to play games on my macbook pro?

I would like to use my wired Xbox 360 controller to play COD 4 on my macbook pro. PLEASE HELP ME!!

In the mac app store check out joystick mapper, its pretty awesome.

Interface an Xbox 360 controller

Can any one tell me how you can use the Xbox360 controller in labview8? Is there already code for it somewhere? Ideally i want to use it as a school project and having it light up simple boolean lights when the button is pressed but i dont know how to get started. Thanks for the help.

Hi
How did you get on with the Xbox 360 to LabVIEW interface? I’m just about to try this out myself but before I buy PC XBOX 360 Controller [1] I was wondering if you managed it or not?
Did the standard USB joystick vis work and if so how much functionality did they give you?
Did you develop your own interface if so would it be possible to get a copy?
Thanks for your help
[1] PC XBOX 360 Controller
http://www.overclockers.co.uk/showproduct.php?prodid=GC-000-MS&tool=3

[solved] Getting xbox 360 controller to work in Skyrim with xboxdrv

I am trying to get my xbox 360 controller to work in Skyrim. I installed xboxdrv from AUR and I can get it running with no problems. I have xinput installed in the prefix via winetricks. I've blacklisted xpad kernel module and have xboxdrv running as a systemd service. Xbox controller support is turned on in the game's options.
The issue I'm having is that the controller will still only operate with certain games, which are the games that can use it with the regular xpad kernel module.
Here's some details about the set-up:
√ systemd service:
[Unit]
Description = xboxdrv
[Service]
User = root
Type = simple
ExecStart = /usr/bin/xboxdrv -D -c /etc/conf.d/xboxdrv
[Install]
WantedBy = multi-user.target
√ xboxdrv config:
[xboxdrv]
silent = true
mimic-xpad = true
#force-feedback = true
chatpad = true
led = 2
[xboxdrv-daemon]
detach = true
dbus = disabled
√ xinput winetrick is installed:
Anyone see anything wrong with my setup?
Last edited by gilmoreja (2014-04-11 23:54:54)

I stumbled over this post: http://www.codeweavers.com/via/skyrim?msg=141344#c7, it might help?

[SOLVED] Xbox 360 controller joytech neo-se

Hello, I need his help please. Someone can make work like the control joytech neo-se, I have understood that the control of xbox 360 this one supported of native form from the kernel 2.6.24 but for any reason to it my me does not work, the led does not stop blinking this where the symbol of xbox and it does not recognize his button / sticks. Someone can to indicate me that it is what I have to configure or modify in order that it works?
Last edited by Cory (2009-10-09 18:34:36)

I have made it, I'm very happy with myself. It's not perfect but should work. It only builds and installs the xboxdrv binary, the other featured tools are not touched. Any improvements are welcomed.
The final dilemma is what category to submit in the AUR. It's not a module or a game, technically not a lib. There needs to be a category for generic utilities.
PKGBUILD
# Contributor: Andrew Mellor (quantumphaze)
pkgname=xboxdrv
pkgver=0.4.9
pkgrel=1
pkgdesc="Userspace Xbox 360 controller driver, alternative to xpad module."
url="http://pingus.seul.org/~grumbel/xboxdrv/"
arch=('i686' 'x86_64')
license=('GPL')
depends=('libusb' 'dbus-python')
makedepends=('boost' 'scons')
source=("http://pingus.seul.org/~grumbel/xboxdrv/xboxdrv-linux-${pkgver}.tar.bz2"
"xbox_controller.diff")
md5sums=('f0a552856825f65504e55f3fa4fdc6fb'
'99b95bb2dae91e12dd07a735214ca657')
build() {
cd ${srcdir}/xboxdrv-linux-${pkgver}
touch got-this-far
patch -Np1 -i ${srcdir}/xbox_controller.diff
scons
mkdir -p ${pkgdir}/usr/bin/
install -m755 ${srcdir}/xboxdrv-linux-${pkgver}/xboxdrv ${pkgdir}/usr/bin/xboxdrv
xbox_controller.diff
--- xboxdrv-linux-0.4.9/src/xbox_controller.hpp 2009-11-02 00:00:25.000000000 +200
+++ xboxdrv-linux-0.4.9/src/xbox_controller.hpp 2009-11-02 00:30:25.000000000 +200
@@ -20,6 +20,7 @@
#define HEADER_XBOX_CONTROLLER_HPP
#include <usb.h>
+#include <stdint.h>
#include "xbox_generic_controller.hpp"
struct XPadDevice;
Please test it and let me know how it works before I submit it.

How do I use the Xbox 360 controller

Hello,
As everyone knows the XBOX 360 controller is the definitive controller for Windows gaming.
I'm working on two projects now. One in Flash and one in Unreal Engine. I thought,"Wouldn't it be great to work on three projects at once."
So the idea came to me that a comedic style hockey game could be made in Flash. Flash is great for action games, and the P2P networking(thought could have been done better) is just sufficient to make a good multiplayer experience.
I do not however want an action oriented hockey game without analog sticks. I've gotten the XBOX 360 controller to work in C/C++ in a Tekken Style Open Wolrd Game, and it was great. Where do I get the XBOX360 code to integrate them into a flash game?
,Jim

The GameInput API's for Actionscript 3.0. You can get when you download and install the Adobe Gaming SDK, after that you would need to import the SWC.

Using the xbox 360 controller in my java application

Wanted to know if there is a way to get the xbox 360 controller or the nintendo wii to work with my java application. Has anyone been able to access either controller using java.
Thanks
GradStudent

nope. you can use jinput to use game controllers... but only game controllers
that can be plugged in and have a driver.
i dont have any game systems, do the controllers have a usb attachment and computer drivers?
xbox mod:
http://www.fury-tech.com/en/Guides/Xbox-Controller-PC-Conversion-Mod
jinput:
https://jinput.dev.java.net/

Xbox 360 controller support

I've found a couple of old threads that require a recompilation of the kernel or a kernel patch (I think) or recompilation of a module in order to get XBox 360 controller working, but those were from 2.6.24 or 2.6.28. Is that still necessary? Can someone point me in the right direction for how to get my box to recognize and use the XBox 360 controller? I've modprobed joydev and xpad, but all dmesg says when I plug in the controller is
usb 3-2: new full speed USB device using uhci_hcd and address 5
usb 3-2: configuration #1 chosen from 1 choice
Suggestions?

majiq wrote:I'm trying to use it with GridWars, but it doesn't seem to be registering. As a note, I found no new entries in /dev/input/.
Grid Wars looks for the joysticks registered as /dev/js(0,1,2,etc). So if you ever get the controller registered under /dev/input just symlink the /dev/input/jsX to /dev/jsX.

XBox 360 controller doesn't work in game in Outlast

I got Outlast, that new horror game, and a Wolf Among Us. I installed Tattleboogie's drivers and using an wired xbox 360 controller (original). In Wolf Among Us it works fine, in the Tattleboogie's settings everything shows as working with responce on every button, but in Outlast, even though the controller is identified and shows up in settings and in the menus as if it were working, it simply doesn't. I get no responce from presses at all.
Also, I've tried Game Companion and Joystick Mapper, but those just doesn't work. I can get some movement, but it's irregular and doesn't correspond properly. So I do NOT want to use that kind of software, and shouldn't need to since Outlast should have full controller support and obviously recognize it.
So anyone know anything about this?
I'm running on a Macbook Pro 13" with Mavericks installed.

https://wiki.archlinux.org/index.php/Keyboard_shortcuts
Once you set up the magic sysrq keys, you need to look at the journal of a frozen session.

XBox 360 Controller for Windows

Hi all,
I'm trying to get my xbox 360 controller to sync on XP under Bootcamp. If I plug in the receiver under OS X and sync the controller it syncs straight away, if I try and do the same under windows it just blinks at me. I've tried using a powered hub but that made no diffrerence. It's odd how it works on OS X but not under windows, as it's the same hardware, which makes me think it's likely a driver issue?
Any ideas?

Thanks, but it's not as simple as not syncing the controller properly. I've done some more testing.
The front-most USB port does not work at all, well it supplies voltage, but no functionality. It doesn't even accept the apple mouse. So this may be related. BTW the Macbook is at most 2 weeks old, so I'll have this sorted at the genius bar.
I CAN get the xbox controller to sync if I attach a powered USB hub to ONLY the middle USB socket, which is weird. I think with the flaky bottom port and this weird behaviour with the xbox controller, it's looking like I should just have the apple techs go over the USB ports before I pull out any more hair trying to figure out why it's happening!

Xbox 360 controller help

Similar Messages

Maybe you are looking for