Xbox 360 not fully functional

Hello everyone, I have pretty complicated situation with my xbox 360 and linksys router. I have Linksys WRT54G Version 2 router. I running Firmware Version: v4.21.1, Nov. 6, 2006. I have my xbox wired to port 1 on my router, and my pc is connected by wireless card. Here is the problem, I can log into xbox live while connected to the router. I can play games and send text messages without any problems. However I cannot talk to certain people on my headset, one being a friend who I play with all the time. If I connect my modem directly to my xbox, I can chat with the headset. When I run the xbox live test connection, the test fails at MTU. I got on my router settings and my MTU is 1365. I have increased it, decreased it, and set it to auto, and it still fails the test. I went to security and unchecked the check box for Block Anonymous Internet Requests. Still cannot chat or pass xbox live chat. I have opened up my gaming ports: 88 to 88 UDP 192.168.1.101 3074 to 3074 UDP 192.168.1.101 3074 to 3074 TCP 192.168.1.101 Still effect. I don't know what else to do. My friends NAT is set to open. so it must not be him. I really would like to resolve this problem. Its funny though because I cannot pass the test, yet I can still log in and play online games, text, send voice message, and ect. I just can't chat on headset to certain people. I can chat to some one my head set though. I know it sounds weird but that is what happening. Any help would be appreciated.

lashingpaladin wrote:
I will try to lower the MTU Further, but when the xbox live test fails the MTU test it says the xbox requires 1364 MTU or higher. It must have something to do with the router because when I connect my modem directly to my xbox, then I have no problems.
Hi
maybe the traffic on networking ports after connectin router in between is of some concern?
try enabling a DMZ ip - 192.168.1.101 for the Xbox on router .
and dont mess around much with MTU , cause below 1350 i dont believe it will work anyway.
let me know the status ?
pe@c3
"What u Give , is wht u better start expecting to take back".. - http://Forsakenbliss.wordpress.com

Similar Messages

Web pages are not fully functional on iPad

Until recently I was enjoying my experience with my iPad 2. I went to Netflix to write a review for a film and was unable to do so. For whatever reason, I am unable to select the desired stars for my rating. While obviously this is not a deal breaker, it is frustrating knowing that some web sites are not fully functional with my iPad. I hope this changes in the future. Cheers.

Here we are over 2 years after the original post and I am having this problem too. Having it in both Safari and Chrome. When I first got my Ipad 3 I was able to rate movies (select star from red to yellow) on the netflix.com website. Somewhere along the line that quit working. Everything else on the site works even radio buttons on page where you select types of movies you watch and how much. At first I thought something on the website changed but then I got a new Ipad 3 at work, low and behold, I was able to rate movies by selecting stars. So what's the difference? Tried deleting history, cookies etc. Removing apps and rebooting. Long story short, I reset my Ipad deleteing all user info and settings and setting up as a new Ipad and it still doesn't work. I can't find any settings on the website itself that affect this. Anyone?

DTR component not fully functional

Hi all,
We recently tried to change the DTR repository properties file, according to SAP NOTE: 1001509.
After performing the process mentioned in this note, we noticed this particular repository.properties file has the wrong content (I downloaded the file from online NWDI - DTR and this caused the file to include HTML Tags and replacing the Key/Value pairings with a different keyset).
This caused the DTR to not fully function; for example we cannot checking any activities anymore. Whenever we try to restart the DTR application in the Web AS, we get a NumberformatException on multiple Key/Values in this repository.properties file.
At this moment, we are not capable of changing this repository.properties file since we cannot checkin activities.
We also tried to replace the repository.properties file on UX, but we now believe (since this file is also version controlled) it is only contained in the NWDI Database.
I've included the error trace DTR pushes out;the current repository.properties file (wrong one) and the correct repository.properties we wish to have in place.
This is a very challenging topic for our teams to solve.
Anybody up for an idea?
Thanks,
Wesley

The great thing about most BlackBerry phones is their removable battery. Anytime something goes wonky with your phone, doing a battery pull should be your first course of action. When you do a proper battery pull, many unnecessary temporary files get deleted and this helps your phone run smoother and ofter quicker. To do a proper battery pull, make sure your phone is powered on then remove the battery and replace it a few seconds later and wait for your phone to boot up. Don't worry, you won't lose any personal data. Many phones from competing manufacturers don't have this feature so be happy that you can correct many issues using this simple technique.
I can answer your question about voicemails right away. Your carrier's voicemail number should be programmed on the SIM card. To access it, simply press and hold the #1 on your phone for a second or two. That should direct you right to your voicemail box where you'll be prompted to enter your password. If you press and hold the #1 on your keypad and you're not directed to your voicemail box, contact your carrier to obtain the number as well as instructions on how to enter it in your phone.
Try the battery pull and report back with your results. Cheers.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Flash not fully functioning in Chrome

When going to a flash page, initial video or flash object will play, but no actions (pause/play/follow link) can be selected. After any click in the flash pane, the mouse pointer will be constantly engaged (i.e. moving the mouse back and forth across the pane will move a video scroll bar right/left, but it will have no effect on the video playback; google maps street view- any click on the map image will allow you to pan but nothing can be selected to advance the view down the street, zoom, etc)
Using Chrome default plugin Flash - Version: 10.3.183.5. Same version in use for IE8 is fully functional.

Are you using relative links to the paths of the media, e.g.: assets/videos/movie1.flv ?
What are you using for FLV playback, the FLVPlayback component itself or are you handling NetStream/Video yourself, or StageVideo?
Default publish settings are never to be trusted in Flash, ever. Paths are RARELY ever saved correctly unless they're relative and even then it's not safe to assume it's correct. I've, long ago, made it a habit of going into publish settings, clicking the browse icon next to SWF/HTML/EXE/etc and manually set the location to publish every single time. If you do that the error should go away about publish destination (and yes, it's really irritating).
What FLV codec did you use?

Making interactive PDFs...Is prototype not fully functional?

I am a business guy (technically savy) who is interested in creating interative PDFs (primarily navigation).
The mantra of fireworks, design once, export to many is very appealing. But I don't understand why it refers to the final product as a prototype.
question 1) The training videos refer to the final interactive PDF created as a prototype. Why? What makes it a prototype? Why isn't it a fully fuctional interactive PDF that can be made more sophisticated by adding forms, etc. ? If it is a prototype, what program do you use to make it fully functional? Is that InDesign? Is Fireworks merly a strating point, to be finished in InDesign? What is disabled to make it only a prototype?
question 2) This is the same question, but about export to CSS & Images (web site). I realize you can add far more functinality with Dreamweaver, but isn't the export a fully functional (if simple), web sight? What is disabled to make it only a prototype?
Prototype implies to me that it does not produce a useable final product. It has to be made useable or finished by another product.
THanks!
Bob

I think the term "prototype" is being bandied about a bit too liberally <grin>. Here's my viewpoint:
Fireworks can produce finished final artwork for screen. I do this all the time as do many other much more talented Fireworks users.
From a web site and application perspective, Fireworks is a prototyping tool. It doesn't build final web sites for applications; it just builds the graphical shell that other applications (such as DW or FC) can use for building out the final product. As a prototyping tool, you can create very realistic representations of the final product, for client feedback and review and to a degree, user testing. One option for gaining feedback from the client is the PDF export. Combined with Acrobat Pro, you can activate the commenting feature and then this PDF gives you and the client the ability to place feedback right in the PDF just by using Acrobat Reader. In this way it can be a useful tool while designing the site or application, and getting specific feedback from the client within the graphical prototype.
The PDF Export could also be a final product, IMO, depending on it's end use. There is no rollover support, video or audio support from within Fireworks or the export process. Likewise for transitional effects. Interactivity though, using the rectangular slice or hotspot tools, is fully functional. Keep in mind though, that default print resolution in FW is 72 ppi. If you plan on printing out this PDF, you'll want to start with a higher resolution for better printing quality.
HTH

Is the trial version not fully functional?

Hi,
I'm testing PE8 trial - also I'm a complete newbie for video editing and PE8. I assume I export my project to end up with a finished video but PE8 doesn't let me export. It's all grayed out. Is it because it's a trial copy?
Thanks,
Sam

Sam,
The trial is fully functional. The ONLY limitation is that the Exported/Shared output will have a watermark banner on it.
Now, the old Export functions (well, most of them) are now grouped under Share. That is why I had to change things to "Export/Share," as it depends on one's version number.
You will find many "export" Presets under the Share tab. Why Adobe even chose "Share" is a mystery to me, but then they did not ask...
Good luck, and do not forget that watermark.
Hunt

Xbox 360 not recognizing playlists on ipod - naming ipod "audiobooks"

All of a sudden XBox 360 is recognizing my ipod as "audiobooks" (when connected directy thru USB). It used to say "Tom's ipod". The bigger issue is that I can no longer access my playlists in my ipod when playing it through the 360. I am using the Elite and a ipod photo. I am not sure what happened. Anyone have any ideas on wht I can do?
Some others on an Xbox support thread theorize that it might be the last itunes update.
http://xbox360forum.com/forum/showthread.php?t=42460

I have the same problem. It happened not too long when I updated iTunes to version 7.3 I think. I now have version 7.5 and still not working. I thought it was my older Ipod, but my new 2007 Ipod Classic 80 GB does the same thing. Xbox 360 doesn't recognize the playlists on my new Ipod. This *****. Please Apple fix this immediately, I don't want to buy a Zune to hear music on my home theatre system. I use the xbox 360 as a media hub for video and audio. Many xbox 360 owners have ipods and use it for the same purpose.

Trackpad not fully functioning after Yosemite upgrade

I have a mid-2011 iMac 27". I was running Lion and upgraded to Yosemite. I have 12 gb of RAM and plenty of storage.
Since the upgrade, the trackpad no longer fully functions. It will two finger swipe up and down within a window (although even that has crashed in Firefox and the only way to get the swiping back is to close and reopen Firefox).
No three finger swipes or pinching to get to Launchpad. No four finger swipeups to get to Mission Control. No side to side swiping either.
No pinching to zoom in or out. Nothing...just two finger up/down swipes and single/double taps for left/right mouse functionality.
Keyboard works just fine. I can arrow key all over the place when the trackpad crashes, but that is a pain.
I've tried everything I've read so far.
I've turned off WiFi as I read in one of the threads that was a fix for someone else.
I've removed the trackpad from Bluetooth, turned it off, shut down the Mac and after rebooting then reassociated the trackpad when the Bluetooth prompt comes up. Nope, doesn't work either although others have said that works for them.
I'm frustrated as I swipe all the time and would like to retrieve that functionality. Help!

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Reinstalling OS X Without Erasing the Drive
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list. Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
Choose the version you have installed now:
OS X Yosemite- Reinstall OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Xbox 360 not working with Airport Express

I have a Airport Extreme router and I just bought a airport express so I can wirelessly relay the signal and hook up my xbox 360 to the express. I put it in WDS mode and it worked fine up until the xbox 360 ran the IP address test. It didn't pass the IP and my settings were on automatic. I thought the Express acts as a extension to the Airport but I guess not. Are there any settings I can change to make this work? Please help.

Same issue you have except I never connected the printer directly to my Mac via the USB. Went straight to the wireless Airport Base Station and connected the printer. Printer is found in "Printer Setup Utility" and connected via "Bonjour", unsure what that is. However the *"Printer Setup Utility"* is asking me to select: *"Print Using"* and giving choices such as CANON BJC-1000 - GIMP-PRINT v5.0.0 beta2. I am unsure what to select. And the printer still doesn't print even with one of these 20 choices selected. Any ideas from anyone?

Mighty Mouse (Bluetooth) NOT Fully Functional

After installing Mac OS X 10.7 (Lion), the Might Mouse BT used with a MacBook 2.26 GHz Intel Core 2 Duo only functions as a pointer but it cannot select with a click .Battery power is okay. The Mighty Mouse was fully functinal with Mac OS 10.6.8 on the same MacBook.

Replaced the batteries with fully charged rechargable batteries. The Might Mouse and now it is fully functional.
My Theory
Rechargable batteries can be a problem with a Mighty Mouse.
Although the battery level was at 40%, the Mighty Mouse started to loose some of its functionality. If you choose to use rechargable batteries, as I encourage you to do, replace them before the battery level drops below 50%.

Help With Trial Program Not Fully Functional

I am using a trial of InDesign. I have been watching several of the tutorials and try to mimic them, and the prompts (or at least some of them) just won't work. I go to make changes as the tutorial does...and I can't open many of the functions, can't show two pages side-by side in spite of clicking the prompt to end shuffling. The "clicks" just don't work on some functions. I can add a rectangle with the rec tool, which works, but when I try to add color the scroll of the color bar won't work and if I click on one I can get to, nothing happens...no response. I try to pull one of the pages down so that they are side by side (2 page spread) and no page gets picked up to move??? I have closed and reopened, rebooted...the thing is that the very first time I tried, it did let me do these features. But since I closed it the first time, it just quit working fully? I have chosen the select tool...I have tried everything. I am noticing that my scroll bar works to move things (on my mouse) but the onboard scroll won't, and in many cases I am not able to use my mouse to click an item???
Any ideas? Does Adobe offer any help on a trial?
thanks!
beth

It's important to tell us what version of ID and your OS, but I'm going to take a shot in the dark and Guess maybe you run Windows 7 or Vista. If that's the case, see InDesign tools and panels don't respond to mouse clicks (Windows 7/Vista)

XBOX 360 Not Compatable With Other Internets through WRT54G

Well, I've been playing XBOX live on my 360 for a couple of months now. When I try to "party up" with a few of my friends from school though, it says that our internets aren't compatable. I called microsoft not knowing anything about what is going on and they just gave me some letters and numbers. One of them was UDP 3074 and the other one was PCP 3074. One, what do these things mean? Two, why am I having this problem? And three, how can I fix it?

Access router setup apge .... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6)Click on setup ...change the MTU size to 1365 ..click save settings ... 7) Please try to test your xbox live.

App Store, Pages 5.0, Evernote, and other Apps will not fully function after installing Mavericks. What is the issue and how can this be solved?

Hello all, I could use some serious help on some major issues I have been having after installing Mavericks on my system (specs stated below). Never has a mac felt ever so rebelious and broken before in my lifelong period of using these systems. Anyway, after installing system 10.9, I had opened the mac App Store upon seeing that applications such as my iWork suite all had free updates. However, when I would attempt to navigate to the updates window, it would not respond to my various attempts. I then tried to get there by the system's menu bar and to my dismay, nothing would work when I clicked on it, not even the apple logo menu. I later quit the application using Command-Q and opened up the App Store by the apple menu option 'Software Update...' instead. Though it looked promising since the updates window did open, all update buttons or even '...more' info buttons were unresponsive. These same problems persisted even after restarting my computer. I had also attempted to see if repairing definitions would help by booting from the recovery start-disk and using disk utility but the repairs it carried out apparently had nothing to do with my issue. Finally, I was able to update to the new iWorks suite (which interestingly did not replace the iWorks '09 suite) by following the notification that asked about allowing automatic updates which I did.
Once trying to use Pages 5.0, I soon noticed that all I could do was merely type in a new document and change various options via key commands. Neither the inspector or top bar menus would respond to any place I click. Similarly, Evernote only starts up on the last used note and merely allows me to scroll through it. The top bar menus, the note select pane, and even clicking inside the note to input text are all not functioning and uninfluenced by any mouse clicks.
I have noticed other apps that will not respond to any sort of input, but I still have not explored all applications to know what the issues of each may be. However there are some applications that work such as Safari, Google Chrome, dolphin, iWork '09 including Pages '09, and others.
I do hope that I can avoid rolling back my system, but in the meantime, it has been quite the obticle course to use my computer for all of my school purposes.
Any help is very much appreciated,
Thank you!
DT
MacBook Pro 13-inch, Mid 2009
Processor 2.26 GHz Intel Core 2 Duo
Memory 4 GB 1067 MHz DDR3
Graphics NVIDIA GeForce 9400M 256 MB

I also forgot to note that this problem also persists with the new iBooks application. I cannot get past the 'Get Started' screen or access the iBooks Store. Again, all top bar menus are unresponsive.
DT

IPod nano not fully functional on Windows 2000 (Charging)

1st: I love iTunes and my previous iPod mini. My mini functioned perfectly from day one with my exact same desktop setup (Windows 2000, Dell, USB 2.0, etc).
I've spent hours trying to figure out why my nano wouldn't charge. Finally, I found these forums and read that "Windows 2000 has a bug". I say this is utter nonsense. I had a mini for months on the exact same computer/OS and it charged just fine thank you.
The only way that I can charge my nano (hopefully it will work, the indicator is essentially useless on win2k) is to enable disk mode and watch the flashing "Do Not Disconnect..." symbol across most of the screen, with a tiny, non-animated battery+lightning bolt icon in the corner. Is it charged? I don't know. Is it actually charging? I don't know. Will I know when it's 80% charged - as per the advertising specs for a fast-charge? Nope - will just have to guess.
What about listening to my nano while it's docked/connected? Nope - can't do that on Windows 2000. Can I try any of the features, games, or hear how a song sounds while docked? Nope.
Apple: With iTunes and the mini, you had a full Mac convert waiting for my next computer purchase to get an iBook. Now, I'm not soo sure. Windows 2000 is on tons of computers - I would guess a pretty large proportion of your iPod customer base even compared with OSX. If you can't fix this bug, and I know you can given that the mini functioned perfectly, I will demand a full refund and unhappily go get a refub mini (now that I sold mine the day I went out to get a nano).

I'm in the same boat as Noah (Win2K, charging problems, etc.). And the moment I unmount my nano (using either of the methods you mention above), it stops charging. At least I assume it is actually charging while mounted, because I have the lightning bolt but no way to see how much of a charge unless I unmount it. But I can't listen to music while I have it plugged in, and that is sure a disappointment. Apple people, please fix!
As a little aside, I don't seem to be able to choose whether or not to "enable disk use". The box is already checked and grayed-out so I don't have the option to un-check it. Could this be another Win2K weirdness?

GE70 2PE Apache Pro - Bluetooth not fully functional

Hi. I just bought the laptop mentioned in the subject line and I have not been able to get Bluetooth to work fully. Everything shows up normally and correctly in the Device Manager and the System Tray, but connecting to my iPhone sometimes works and sometimes doesn't. When it does connect, I'm not able to stream music to the GE70's speakers nor place or accept calls via the laptop. I'm able to do all of these things with the same iPhone (5, iOS v7.1.2) with 2 of my other computers without any problems.
I have the latest Bluetooth drivers MSI makes available, the latest BIOS, and all of the latest Windows updates as of 9/7/2014. I'm running Windows 8.1 64-bit. I've tried the latest Intel drivers (the GE70 is using the Intel AC 3160) and it didn't help. I've reverted back to the latest MSI drivers/software.
Any help is much appreciated. Thanks.

Look at this post....
https://forum-en.msi.com/index.php?topic=183048.0

Xbox 360 not fully functional

Similar Messages

Maybe you are looking for