Xbox 360 using airport base station

Hi
I have an imac connected directly to an ethernet modem which connects to the internet. I would like to connect my Xbox 360 to the internet using an airport extreme base station - i.e. wire from x360 to base station, wireless connection from base to imac and wire from imac to modem.
Is this possible?
I have tried selecting the 'share my connection over airport' option in system preferences but this does not seem to have done the trick.
Any suggestions much appreciated - thanks!
Intel Duo Mac OS X (10.4.4)

It's true that the Xbox can support wireless, but it's probably more important to ascertain whether the AEBS is "compatible" with Xbox Live. I have a D-Link wireless router (the DI-624), and D-Link is very explicit about firmware versions that are compatible with Xbox Live (for example, v2.42 of their firmware is supported with Xbox Live, but v2.50 is not). I'm not sure what Xbox Live does that's outside the realm of normal network operations, but it's probably worth finding out...

Similar Messages

Just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

just got a used airport base station. Set it up and getting wif signal. when I try to hook up on a computer it asks for a security key. where can I locate key?

If you mean the hexidecimal equivalent of the alphanumeric password, then you can find this via the AirPort Utility, as follows:
AirPort Utility > Select the AirPort > Manual Setup
On the AirPort Utility's menubar select Base Station > Equivalent Network Password

Losing connection with safari using airport base station

Airport base station. Frequently loses connection with safari, even though the station shows green. Same problem with all our devices, IMac, MacBook Pro, IPads, Iphone etc. However, disconnect not at the same time, some devices works, others don't.

Hello sjobizz,
Thanks for using Apple Support Communities.
For more information on this, take a look at:
Wi-Fi: How to troubleshoot Wi-Fi connectivity
http://support.apple.com/kb/HT4628?viewlocale=en_US
Wi-Fi and Bluetooth: Potential sources of wireless interference
http://support.apple.com/kb/ht1365
Best of luck,
Mario

Trying to set up a wireless guest network using Airport base station. The first network setup was fine but the second one doesn't work. Any suggestions?

I purchased the new Airport base station that allows for a wireless setup of a primary network and a guest network. The primary network installation worked great but I cannot get the guest network to work properly. Any suggestions on how to make it work?

The AirPort base station is designed to connect to a simple modem......not a modem/router or gateway device that is often furnished to users by Internet Service Providers.
So, the first troubleshooting question would be to find out what the make and model of the device that you call your "modem" might be.....to see if you have the right kind of product that will allow the Guest Network to operate correctly.

I used Airport Base station and I was able to extend my network using airport express and connect my printers. Now I am using Extreme and I can't extend the network (Express) or the printers nothing shows up. I am using utility 6.3 and Mt Lion What is

I had an Aiport Base Station and extended using Airport Express, where I also connected my printers (network). Now using Airport Extreme off Mt Lion 10.8.4 and Utility 6.3.
I can't extend the network (express) or connect my printers (USB) nor will it find my one wifi printer.
What's up?

For now, leave the AirPort Express powered off.
Power off the entire network....all devices.....in any order that you want
Wait a few minutes
Power up the modem first, and let it run 2-3 minutes by itself
Power up the AirPort Extreme next, and let it run a full minute
Keep powering up devices one at a time about a minute apart until everything is powered up (leave the Express off for now)
Open AirPort Utility and check to see if the AirPort Extreme is visible.
If it's not, click the AirPort Utility menu at the upper left of the screen, then click About AirPort Utility. Post back with the version number of AirPort Utility that you see there....which should be AirPort Utility 5.6.1.
Post back on your progress.

Using Airport Base Station as Extender

Hello,
I am trying to set up an ABS as an extender for the wireless network in my house. If I have Mac Address filtering set on my original network will that carry over to the extension or do I have to put all of the Mac Address on the original network into the second base station? If I do, is there a way to transfer them from one Airport to another?
Thanks.

If I have Mac Address filtering set on my original network will that carry over to the extension
No
do I have to put all of the Mac Address on the original network into the second base station?
Yes
If I do, is there a way to transfer them from one Airport to another?
No But a few users have reported that they have been able to "export" the settings from their main router and "import" them into the new router to be set up....while others report that these particular settings are not imported when they try this.

Need to open NAT for Xbox 360 using AirPort Extreme 2012 Model

Alright this is driving me crazy haha.
Here is the equipment im working with.
Xbox 360
Motoroloa SB6141 Modem from time warner cable
Airport extreme 2012 model
Early 2011 Macbook pro
if its been released i have the update for it. haha
So i have not had this issue before i got the SB6141 on Saturday.
I have read things about it and none of it is clicking. trying to get more personalized help here.
Any Help is appreciated.
Thank you in advance!

So i have not had this issue before i got the SB6141 on Saturday.
That.....is the problem.
Right now, you are getting Double NAT because the modem is providing NAT firewall and the AirPort is providing NAT firewall. That equals Double NAT also known as Strict NAT.
Contact Time Warner support to get the default IP address for the modem so that you can get into the settings and turn off the firewall in the modem. It needs to be set to pure bridge mode. A decent phone tech will know how to do this.
If you have other modem options, you won't have this problem with a Netgear CMD31T....also on the list of TWC recommended modems.

Can only apple networks be extended using airport base stations?

My ISP provides a wifi network using a Tilgin product.
I have a time capsule and I was wondering how I can integrade my time capsule (for back up purposes) into this network.
Is there a way to extend this network using my time capsule? I know the options on the time capsule is "create a new network" or "extend a network" but what networksrcan be extended?
Thanks
Pieter

Correct. You can only extend an AirPort Express, Extreme or Time Capsule network with an AirPort Express, Extreme or Time Capsule. In this case, you can only connect the Time Capsule to the modem by Ethernet to get Internet connection

Trying to connect an XBOX 360 to my airport base station via ethernet cabl

Hello,
I have the older snow airport base station and was trying to connect my xbox 360 to it via an ethernet port. There are only 2 ethernet ports on the snow base station. one is being used by the cable coming from my dsl modem. the other free port i tried plugging into my xbox 360 to no avail. the xbox cant get an ip address. the open ethernet port on the base station is labeled with the circle logo. the one being used by my dsl modem has the two outer pointing arrows. I turned off the airport to my macbook and tried to connect my macbook to that port my xbox was in and it would not connect to the net either. Is it possible, i have the ports backwards. my wireless internet for all 3 mac computers works fine. Any help would be greatly appreciated!!!!
Thanks!!!
Vinny

Yes, you have the ports connected backwards.
The WAN port is labelled with the "circle of dots" icon, and must be connected to your DSL modem.
The LAN port is labelled with the "double-headed arrow" icon, and that is where you connect ethernet cabled devices on your LAN.
See Apple's article AirPort Base Station: About the WAN and LAN Ports
What is surprising is that you haven't previously run into all sorts of problems with your existing setup. Once you cable things properly, you will likely have to power down your DSL modem and Base Station for a while (sometimes just an instant, sometimes overnight). After waiting, plug the modem into power and wait a minute. Then plug the base station into power and wait for it to restart.

Do I need a airport base station to extend my network or can i use my network router?

I bought a Airport express to enhance my current wifi in the house, and i can't seem to get it to enhance it. There is one room that dont have wifi and it is the room i bought it for. Now when i talked with apple they said all i needed was the express and it should enhance it, but i can't seem to get it to work. Do i need a airport base station of some sort or does my current router work fine. I just need some help and its been 3 months and its getting old. So i appreciate any help.

Do i need a airport base station of some sort or does my current router work fine.
I'm afraid that this will not help you, but at least you will have some accurate information.
Using wireless only, the AirPort Express can "extend" or "repeat" the wireless network that is provided by another Apple "n" wireless router.
Using wireless only, the AirPort Express can NOT "extend" or "repeat" the wireless signal if it is being produced by another router from another manufacturer.
In this case, you will need to connect the AirPort Express to the other wireless router using a wired Ethernet connection. Post back if you need more information about this type of setup.

Airport Base station or Airport express to use wirelessly for dial up ?

I have an Ibook G4 1.33 with a Airport extreme card.
I currently have it set it up to the wireless modem that my phone company provided for me for my DSL service.
Unfortunately I am moving to an area that does not have DSL service. I would like to know if I can set up my Ibook to use it wirelessly and have it connected to an Airport base station or Airport express in order to have my dial up service to work wirelessly???? So Airport base station or Aiport Express?? Many Thanks in advance- Geof
IBook G4 1.33 12 1.5GB, Vintage Imac , Ipod with video, Ipod Nano Mac OS X (10.4.3)

The only base station with dial-up capability (in addition to traditional ethernet equipped modem capability) is the AirPort Extreme Base Station w/modem. Check the Apple Store to look over the details, and make sure you are looking at the AEBS with the modem (there is also a version without a dial-up modem which will not work in your application).

How To use MacBook Pro as airport base station?

I am trying to set up my MacBook Pro as an airport base station to share my Internet connection. I am running OSX 10.7.2. I have checked Internet Sharing, and checked "Share your connection using "Internet" to computers using: ______________." There are five options, but "Airport" is not one of them. Has this panel changed in Lion? So how do I share the connection?

palenoue wrote:
Got an iPad, got a macbook pro running 10.6.4, got an ethernet cable running to my cable box.
Now how do I set up my laptop to be a wifi base station so I can access the net with my iPad?
Tried searching for a how-to here on Apple's site, got around 500 hits that had nothing to do with setting up a powerbook as a wifi base station. Seriously, Apple, this is worse than worthless, it's highly frustrating. You need to fix your support search.
And after you follow the directions in the link provided by JimHdk, you can get yourself a wireless router. Using a wireless router will eliminate the need to have your Macbook pro present and powered up every time you want to connect your iPad to the Internet via wifi. Just because your Macbook Pro can act as a router does not mean it should or that you have to use it as such. A router is specifically designed to do what you want to do.

Using AppleTV as an Airport Base Station?

Can I connect the ATV using ethernet and then use the AirPort part to extend the range of my WiFi network?
I'd like that, because my house is made from thick reinforced concrete and WiFi signals have a hard time getting through. Connected like this, the ATV would much improve the WiFi reception in the living room so I can have a better connection with my MBA on the couch (close to the TV is probably an ideal airport base station location for iPod/iPad/MBA).

No

How can i use an airport base station and multiple airport expresses with U-verse and still use wireless tv boxes?

I just got uverse, and when I put my Airport Base Station in Bridge mode I lose access to the 4 airport express stations I have. Can anyone tell me how to turn off the u-verse wireless, set up a network with all the apple stations and still have wireless u-verse tv boxes work? Thanks!

Can I relocate the airport base station to downstairs and connect it to the Sawtooth there for receiving wireless from the Verizon router and broadcast further to its wireless network?
Sorry but no the AirPort Extreme base station (AEBS) will not wirelessly connect to the network provided by the Verizon FiOS router.
What you could do is get another AEBS, an AX, or a Time Capsule and place that downstairs. Then use that device to wirelessly connect to the wireless network provided by your current AEBS. If your current AEBS is not 802.11n capable then you would need to use WDS to make this happen. One bad thing about WDS is that each WDS link cuts your affective wireless bandwidth in half.

How to make sure I'm the only one who can manage my airport base station using airport utility?

I know we have to use the Airport Utility application to manage the Airport base station in order to create a new network, creating the SSID and chosing the encryption mode and setting the password but how I could be sure I'm the only one who have access to those settings? A user of my network can install the Airport Utility application and change those settings. With other routers like D-Link, to have access to the settings you need to know the admin password to modify the settings. I can't figure out how we can do this with Airport Extreme base station. It's maybe obvious but I'm in the cloud for the moment.

You can set a base station administrator password in order to limit who can administer the base station. With AirPort Utility v6.x, you can set this password on the Base Station tab.

Xbox 360 using airport base station

Similar Messages

Maybe you are looking for