Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

i have a time warner modem with the ethernet cable plugged into my airport express to create a wireless network in my house. my macbook and dell connect with no prob.
the xb recognizes the airport express, shows it as connected with green bars, but when i try to log into xbox online, it says that there is no connection.
i can plug in the ethernet cable from the xb to the airport ex and there is no problem. only when trying to use the wireless adapter.
how can i stop this? also, how can i find my IP address?
since the xb wouldnt connect and find my ip automatically, i tried to do it manually. when i go to terminal on my macbook and enter "ipconfig e0", i dont see an IP address.
i have seen a lot of info on this but it mainly deals with airport extreme or those who are trying to connect to airport express with an ethernet cable.
so if you can help me troubleshoot the wireless connection between my xb and my airport ex OR explain how i can find my IP address, i would be very grateful.
FYI---the airport express was purchased in april, so i believe it is the new "n" model.
thanks for all your help.

Gary Sanborn, please share your tricks. I'm curious to know how you got it to work. I used to have the old Express and that worked just fine. The new version (n) doesn't seem to connect to xbox live. As previously stated, mine also shows "connected" and a strong green bar signal on the xbox but the text can't get passed "connected to live"... if I'm not mistaken.
I heard about holding down the option button white selected the type of wireless connection and connecting to wireless b only. I would want to avoid this option. I don't want my express to run that slow. Please advice. Thanks in advance.
By the way, I haven't tried it since recently upgrading to OS X 10.5.3. I wasn't sure if that affected airport's connectivity with xbox 360.
Message was edited by: Gino Zevallos

Similar Messages

Airport extreme connecting with xbox 360 wireless adapter problems...help!!

Has anyone linked their xbox 360 wireless adapter to an Airport Extreme? I need help! Neither Apple nor Microsoft knew how to link the two devices. If anyone has successfully been able to make this work, your help will be much appreciated. Thanks guys

Yes - Mine works no problem. I have found that I have to unplug the Xbox360 wireless adaptor and plug it back in occasionally (if the green light is on everything is fine). Are you using the correct WPA Key?

Configuring an XBOX 360 Wireless adapter to Airport

How do you configure an XBOX 360 Wireless adapter to your Airport. I've Been trying to connect to xbox live but have been having trouble doing this.

You have connect 360, right?
http://www.nullriver.com/products/connect360
If so, I think you have to change the default security from WPA to WEP (or vice-versa) in order to make it work.

Does the Xbox 360 wireless adapter even work with the WRT54G wireless router?!!? If so, how???

I just bought a WRT54G wireless router (Ver 8.0; firmware updated to latest). I have successfully connected my wireless laptop using WEP security, but I'm at wits end trying to get the Xbox 360 wireless adapter to work. (It worked just fine with my Netgear router until that router recently died.)
When I do the "Test Media Connection" routine (you XBox 360 users know what I'm referring to), the Xbox immediately recognizes the Network Adapter and indicates that it is connected to the Wireless Network, but it inevitably fails the next step in the process: IP Address. I have the set-up for the IP address to be assigned automatically by the router (which is set for DHCP Server enabled).
I have gone around the mountain innumerable times myself and then with well-meaning friends who say try this, try that, try this, try that. I've had to re-establish my laptop set-up so many times I wanna scream!
Are the Xbox 360 wireless adapter and the WRT54G even compatible? If so, what am I missing here? I'm not too technical and obviously in over my head, but this ought not be that hard.
Please, please do NOT respond unless you KNOW the answer! I don't mean to be curt, but I'm over / past "suggestions to try."
Thank you VERY much for your time and consideration if you can help me.

I don't think that the X-BOX adapter is not compatible to wireless rotuer .... there are few settings you can try on the router ... Access router setup page ... Please click on the tab "Application and gaming" and click on sub tab "Port range forwarding" 1) On the first line in Application box type in "Xbox", in start box type in 88, in end box type in 88, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 2) On the second line in Application box type in "Xbox", in start box type in 3074, in end box type in 3074, in protocol keep it both, in ip address type in 192.168.1.20 and give a check mark on enable box. 3) Now save the settings 4) Once you return to the setup page, click on the tab "Administration" and disable the UPNP and save the settings. 5) Now assign the given ip address on your xbox ip address :- 192.168.1.20 subnet mask :- 255.255.255.0 default gateway :- 192.168.1.1 Please assign the dns address on the xbox primary dns :- 4.2.2.2 secondary dns :- 192.168.1.1 6) Please try to test your xbox live. Hope it works ...

WRT350N compatibility with XBox 360 wireless adapter

I just installed a new WRT350N - all my computers connect just fine - my XBox wireless adapter will not connect. Is there a compatibility issue?

Make sure that your wireless security is not set to WPA2. The XBOX 360 wireless adapter does not support it. You need to use WPA or WEP.
EA6500 - v1.1.27.144156
WUMC710 - v1.0.00
SE2800
AE3000

TC new firmware and xbox 360 wireless adapter

So there is a new firmware for TC...it is ver 7.3.1. Any with the new firmware has tested the connectivity of TC wth the xbox 360 wireless adapter?? I don't have access to it now so I am hoping someone of you have tested and to share the success story??

**** IT!! I just tested the connection...no luck! When the **** is Apple going to fix this problem?!!!! I now regret getting rid of my AEBS for TC!!!!!!

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images

Recently moved and installed ATT DLS - I use their wireless router and connectted my airport express - Now I'm getting the Blue ? on some images - and at times - videos don't load. I've increased / deleted Cache. Suggestions? Misconfig? Could it be possible my configuration from MacBook to router isn't correct?
Thanks!

JG,
Thanks for the info.
Couple of questions. I found an apple support document on this topic that opened with this line:
"AirPort Express and all AirPort Extreme base stations can use WDS. Earlier AirPort base stations can't."
If the TC is an airport extreme base station, why can't this work to extend the network? I think I misunderstand. Here is the full article:
http://support.apple.com/kb/HT2044?viewlocale=en_US
If I buy a new airport extreme, set it to wireless-n only as my main router, am I correct that my existing time capsule could be used as a bridge if plugged in upstairs?
Final question (and that should do it), could I take this old airport express, plug it in upstairs using the ethernet connection, and just create a separate wireless network to use with a different name?
I'd like to keep one network if possible but just kicking around short term solutions.
Thanks again.

Xbox 360 wireless adapter for windows 8.1.

would the xbox 360 wireless receiver adapter work with windows 8.1. because i'm having a problem that my controller keeps getting disconnected for no reason.

Hi,
Regarding your problems about not connecting the controller to the adapter, I suggest you replace the batteries or recharge the battery pack.
Meanwhile, I would like to verify if the controller is recognized in Device Manager. How about changing different USB ports?
Please reinstall the latest driver of the receiver adapter and the controller from Microsoft.
If the issue persists, I would recommend you to contact Xbox support for further assistance.
http://support.xbox.com/support/en/us/nxe/contactus.aspx
Regards,
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

WRT610N 5ghz xbox 360 wireless N adapter won't connect (xbox 360 "Wireless Mode = Not connected")

Hi folks,
Looks like some other folks have reported similar. Haven't seen if an answer has been found anywhere.
WRT610v2 running latest firmware.
xbox 360 sees both the 2.4 network (ssid = network1) and the 5.0 network (ssid network2) when it does its scan.
Initially, xbox showed network strength for 2.4 network at 3 out of 4 bars and 5.0 network at 1 out of 4 bars.
Connects to 2.4 network just fine
Won't pull an ip address and reports "Not connected" when I select the 5.0 network.
I tweaked the wireless settings per some suggestions I found in this forum and now it shows the 5.0 network at 4 out of 4 bars signal strength. Also turned security on and off and xbox 360 reported the changes in security on the 5.0 network.
So the xbox 360 is definitely seening the 5.0 network. and can tell if it is running WPA2 or not.
If it can see the 5.0 network and recognizes what security and network type (infrastructure) is set, would would stop it from connecting to the WRT610n router and getting an IP address? No mac filters or firewalls are set and, again, connects just fine and gets an ip address if I select the 2.4 (network1 ssid) instead.
Won't work if I manually set IP, subnet, gateway, dns either.
Have tried mixed versus dedicated on the N radio...
Any suggestions would be appreciated.
thanks!
rjb

Hello,
Thanks for the suggestions. Tried as you suggested but still no luck. Seems to see the 5ghz ssid just fine with plenty of strength but just will not pull an ip address or even connect if I manually assign.
Any other thoughts?
thanks again for taking the time to respond.
rjb

WRT54G - How do i make my router find my xbox 360 wireless adapter?

Can someone please help me? My wireless adapter is not getting anything. My ipod gets wifi from the router but no my xbox.

All you need to do is forward ports on the router for XBOX-360 you got from the XBOX provider for the assigned static ip address & do the complete network power cycle & you will be able to play the games wirelessly!!!

Xbox 360 Wireless Adapter and WRT54G

I can only squeek out one (red) bar of signal on my xbox 360 when it is only two rooms away (with open doors and few walls) ...
Are there settings on the 54G that will boost the wireless signal?
Not using any encryption ...
Any suggestions?

There is no setting to "boost" the wireless output. However, changeing some settings may get you a better connection.
Make sure you are using a unique SSID. Do not use "linksys". Also, be sure that "SSID Broadcast" is set to "enabled". Broadcasting a unique SSID will help your Xbox find your router and lock on to its signal.
The router usually works better if it is raised several feet off the floor. Try to position the router and the Xbox closer together, with as few obstructions as possible between them. The router antena should be vertical. Do not place the router behind monitors, or other computer equipment -- get it out in the open.
Try setting the router to a different channel. Channels 1, 6, or 11 usually work best. Check out your neighbors and see what channel they are using. The channels overlap, so try to stay at least +5 or -5 channels from your strongest neighbors. For example, if you have a strong neighbor on channel 9, use any channel 1 through 4.
Eliminate any interference from other 2.4 GHz devices, such as wireless phones, wireless baby monitors, wireless keyboards and mice, Bluetooth (including Bluetooth game controlers), and microwave ovens. Even some 5+ Ghz phones use the 2.4 GHz band. Unplug these devices and see if that improves your connection.
Another thing that should help would be to use a high gain antena on your WRT54G, for example, the Linksys HGA7T.
Ultimately, for the best gaming experience, a wired connection usually works best.
Message Edited by toomanydonuts on 04-10-200703:47 PM
Message Edited by toomanydonuts on 04-10-200703:49 PM

Wireless iBook not connecting to Airport Express

As in previous discussions i've seen, all of a sudden my iBook which i have used for quite some time now without any major problems will not find my airport express wirelessly, i am using a router and the same connection for my desktop (hardwired) and the desktop works 100%, i've even replaced the cable from the router to my Airport Express and when I take the very same cable that goes from the router to the AE but plug it straight into my iBook it works 100%, but when plugged into the "AE" the iBook is not finding it, or actually it does come up in the list of available wireless ports (I live in new York city so there's a bunch on there at any given time) but it does find mine automatically as it used to, but when I try to connect to it when i find it in the list, it says "There was an error joning the AirPort network"... if i hit 'try again' several times it it will evntually (somrtimes after 3 tries othertimes after 30 tries)... but even after it says in the menue bar that I am connected with 100% strength, nither iTunes Air tunes finds the AE connection nor Safari (which says "You are not connected to the internet.")
At the browsers suggestion i then go to the network diagnostics and run through the prompts, until it gets to the 'Select AirPort network" window and nothing shows up.
Then i tried the AirPort Admin utility and it does not find my base station either.
My connection to the internet is 100% without the AE, so obviously something is wrong with my iBook airport card or the AE itself.
Yesterday I uplaoded the newest software 6.2 then reset the AE and actually it worked 2 sessions, then I got back on later in the evening and was having all the same problems...
so I read on these discussions that going back to 6.1.1 was what was helping others, well so far it has made no difference here.
that said the signal that it did find after trying again and again and that does show up in the pulldown signal menue drops off eventually... and all this while still not being able to connect to the internet or airtunes wirelessly. and again all the while my connection on my desktop (hardwired through the same router) works 100% (I have verizon DSL and it's pretty great.
THE AIRPORT EXPRESS GREEN LIGHT IS ON as well.
I have not done a 'hard 5 second re-set" of the AE becuae i thought it might be difficult to imput all the settings all over again, since i did not set it up myself originally... is this my only choice? can some one give me any other ideas? thank you.

Glen,
I feel your pain buddy - same issue here. I have a PG G4 running AE as well. I have internet through Comcast which is coming from the wall, into the modem, and then to the AE. I have faced similar problems as you at least twice in the past three days. Tonight I went to check my e-mail after reading for a couple hours and my drop-down showed a check next to my network, the AE status light was green, and it looked fine. However, when I went to check e-mail I was not connected and same thing with internet. I finally launched Airport Admin Utility and my base station did not show up in the source list - hmmmm?
I am a little concerned about this myself because it is frustration. If you push the reset button on your base station while it's still plugged into power and hold it down for five seconds it will go through a "hard" reset (keep in mind this is not the same as a "factory default" reset). Have you done this before? It takes about 45 seconds. When done and the status light is back to green, you can join the Apple network _______ (some strange numbers) from your airport drop down and then launch Apt. Admin Utility. When you double click on your base station from the admin utility it will come up with a list of profiles. It will allow you to select your previous saved profile from a list. Click on your previous profile, click OK, and the AE will reset with your previous settings. This has gotten mine back up and running, but it's a littl disconcerting that it's happened so much
Any other thoughts out there? Anyone else having these problems and have suggestions for troubleshooting?
-JB

Wireless to ethernet connection using airport express

Here is what I have and what I wish to do. I have a Mac Mini intel duo with Airport extreme card Connected to road runner via a ethernet router. My wife has a window running XP with out airport extreme. Can I use airport express to share the internet with my wife's computer by using an ethernet cable from my wife's computer to the airport express, remotely to (another room). Utilizing my computer as a base station?

Fordmanduo, Welcome to the discussion area!
No that will not work.
The Ethernet port on the AirPort Express (AX) is active ONLY when the AX uses WDS to wirelessly connect to a network.
OS X's Internet Sharing (via Mac mini) is not compatible with WDS.

My wireless network looses connection between airport express and modem.

The indicator under the "Internet" icon in airport utility switches from green to amber every minute or so. When it is amber I have no, or very slow speed.

Interestingly the Linksys WRT-54G is one of the few non-Apple routers that are WDS-compatible with the earlier 802.11g AirPorts. There are a number of posts on the Internet (use the following search terms: Linksys AirPort WDS) where the authors described how they configured theirs to work.
If; however, you don't want to "experiment," your suggestion to interconnect the two routers by Ethernet should work just fine. In this case, you would want to configure them both for a roaming network.

Xbox 360 does not connect to Airport Express wireless network

I'm at my wits ends. I got a my son a wireless adapter for Christmas and for the life of me cannot get it to work. We have looked at all the discussion forums on the internet and did A LOT of trial and error and still to connection. On one occasion the xbox 360 wireless adapter saw the network and once it tried to connect is dropped.
I have a Wii, two windows PC's, a printer and a PowerMac all connected to my wireless router. The xbox and the Airport Express both have the latest firm ware update.
These are some of the things I have noticed and tested:
1. Connection is Cable Modem>Vonage Router>Airport Express....wireless to Xbox360
2. I have taken the vonage router out to go
Cable Modem>Airport Express...wireless to Xbox360 and still no luck.
3. I was suspecting a double NAT and contacted Comcast to see if I could put the cable modem in bridge mode and they couldn't help me.
4. The network is open (no security)
5. The wireless adapter is a steady red...then when I tell it to find the network it drops out (LED turns off)
6. I have tried to see if I have a double NAT but tracing in the network utility does not show anything.
7. I have tried to place the Airport express in bridge mode and when I updated, it doesn't not come back up and I have to do a hard reset to communicate to it again.
8. There was one instance when the wireless adapter LED was green for about 15 secs and when we tried to connect it dropped out completely (no LED light).
9. I know it works because in the various forums I have read that people have it working.
I called xbox support and they were not very helpful...wouldn't even search similar cases...I have tried everything I could think of and I'm lost any assistance is appreciated.
Victor

Tesserax,
What is the make/model of the Comcast-provided modem? How about the Vonage router? Is this router also wireless? Finally, I assume that prior to introducing the AirPort Express Base Station (AX), the modem & Vonage router were working properly ... correct?
Thanks for your interest in helping me. To answer your questions:
1. The comcast make and model for the cable modem is Scientific American Model#DPX2203
2. The vonage router is ethernet hard wired connected between the cable modem and the apple express wireless route. The vonage router is model#VDV21-VD
3. With the exception of the wireless connection between the Xbox 360 and AX; everything works fine.
4. The AX is running Apple firm ware 6.3
In the discussion I have read of similar problems and have tried them all to no avail. I'm sure the is a fix to this problem because of people in the discussion groups have had the same issues. I don't suspect the wireless router because it has a steady red light and only turns off when we do the network test or scan for networks.
Victor

Xbox 360 wireless adapter wont connect to Airport Express/cant find ip

Similar Messages

Maybe you are looking for