Xbox controller is no longer recognized - one blink and death

I have a wired Xbox 360 controller which I have used very much in my Arch system, with no problem. I haven't used it for a few months, though. Now, when I plug it in, there is a very big chance it will blink once and then die, without being recognized.
If I'm very lucky, it will be recognized, but then it might die while I'm using it. It's all really random, and didn't happen to me a few months ago.
What's going on? It's quite frustrating
(Just in case, I have an up-to-date system. Ah, googling a little bit came up with this question: http://www.techsupportforum.com/forums/ … 02618.html . The problem seems to be the same as mine.)
Last edited by bruno321 (2011-11-25 16:16:46)

Are you using the xpad module? Anything in the logs?
I use xboxdrv works really well, there is a package available in AUR.

Similar Messages

  • My mac is no longer recognizing my phone and I cannot manage the music on my phone. What can I do?

    My mac is no longer recognizing my phone and I can no longer manage my music. How can I change this? I cannot upload IOS 7 because I have too much music on my phone and not enough space, but I cannot delete music on my phone because my computer will not recognize my phone.

    Hello Salmomma,
    Thank you for the details of the issue you are experiencing when trying to connect your iPhone to your Mac.  I recommend following the steps in the tutorial below for an issue like this:
    iPhone not appearing in iTunes
    http://www.apple.com/support/iphone/assistant/itunes/
    Additionally, you can delete music directly from the iPhone by swiping the song:
    Delete a song from iPhone: In Songs, swipe the song, then tap Delete.
    iPhone User Guide
    http://manuals.info.apple.com/MANUALS/1000/MA1658/en_US/iphone_ios6_user_guide.p df
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • TS1363 My ipod nano 5th generation is no longer recognized by itunes, and won't play any of it's music.  It still shows it all listed, but freezes up if you select a song to play.  Is there a way to restore it?

    My ipod nano 5th generation will no longer play any of it's loaded songs.  It still plays the video that is on it, and the radio works.  It is not recognized by itunes and I have gone through all their help steps.  Is there some other way to restore it?

    If the iPod is defective and not abused Apple will exchange it at no cost under your warranty.
    Make an appointment at the Genius Bar of an Apple store.
      Apple Retail Store - Genius Bar

  • IPhone no longer recognized by ITunes, and Service is not starting

    Hi
    My IPhone is no longer recognized by ITunes. I already tried the steps on http://support.apple.com/kb/TS1495, but had no luck, and I also tried to remove all relevant Apple software and reinstall, but this did not result in anything either.
    Now, also, if I start up ITunes, it tells me, that the "Apple Mobile Device Service" is not running. Trying to start this service by hand, did not work. Following the rules on http://support.apple.com/kb/HT1923 did not work.
    I am running Windows 7 Professional 64bit, my ITunes version is 9.0.3.
    This is my third PC in this household this has happened (i switched the PCs after it appeared on my other PCs), and I am simply not willing to do that again.
    Please, if anyone has an answer, it would be greatly appreciated.
    cheers, Roland

    http://support.apple.com/kb/HT2553 as a last ditch effort but if it has been recognized by computer before and you did everything in HT1923 and TS1495 then i would say like msconfig stuff or disk cleanup and such.. it would be worth it to contact apple tech support if HT1923, TS1495 and HT2553 doesn't work.

  • Iphone 5S no longer recognized in ITunes and so cannot sync

    Iphone 5S is no longer recognized in ITunes so it cannot sync.  I am not seeing the driver listed and therefore the recommendation to repair the driver does not work for me.  Have rebooted, deleted Itunes and reuploaded many many times.  I have read and tried all the "Apple" fixes listed.  I use Kasperasky Anti-Virus and wondered if that could be blocking the driver needed.  I have added the Apple programs to Kaspersky's exclusion list but that did not work.  Seems ridiculous to spend any more money to download songs in ITunes if I can never sync my Iphone 5S to get them on my phone.  Apple techs, please help - just recommending the standard fixes I keep reading has not helped at all.  Anyone else have a different suggestion?  Thanking you in advance as I've spent so many hours on trying to find a fix.

    Thank you for your suggestions but I still have the problem.  The Iphone 5S is not recognized and I have deleted Kaspersky off my computer (and still have not put it back on yet).  I still do not see the Apple Mobile Service USB Driver listed.  I had done this process previously (several times) but went through it all again in your order just in case I missed something.  I am wondering if there is a way to go back to the previous version of ITunes in case it was the ITunes update causing me the problems.  I do not think I can blame it on Kaspersky since it is not on my computer now and I have the same problem.
    I also notice that the Iphone is not listed in my devices in Windows 7 - not sure if it was before or is suppose to be for sure - but just noting it is not. I tried the option to add devices but Windows does not find the Iphone 5S.  Just thought I would add that information in case that should lead to a solution.  Again thanks for your time - would appreciate any other suggestions.  I don't think you can use Apple Support without paying money so would like to find help from someone else having the problems.  I think it is odd so many people are having problems with their phone being recognized or sometimes just it syncing - and various steps have helped others (like uninstalling and re-installing).  Thanks for any help.

  • IPhone 3GS no longer recognized in iTunes and does not charge via wall

    I upgraded my iMac to iTunes 9.2 when it came out.
    My wife then upgraded her iPhone 3GS to iOS4.
    Since then it is not recognized in iTunes and does not charge via the wall adapter.
    I realize this topic crosses over with several ongoing discussions, but there are no 3rd party peripherals involved here.
    The only major changes to our set up have been the itunes and iOS upgrades.
    The battery is running down, any ideas to fix this, or other similar experiences welcome.

    Went to the Apple store and they replaced the cable.

  • Video IPOD no longer recognized by Itunes and wont Update

    This is a long complicated issue. My Ipod has been working flawlessly until 2 weeks ago. Someone tried to plug it up to their computer to charge it and it wiped out my library and added their library. At first i was thinking no big deal, i will just reconnect it with my computer and it will load my library back on. However once connected to my computer it is not recognized by itunes. So i did a reset , which seemed to be working great and it started "updating" about 80% through that process it gave me an error message that says " This disc can not be written to or written from" now I have no idea why it would say that? and although it seems completely wiped out and useless, it still shows that much memeory is missing in the "about ipod" screen on the ipod. So i know the information is there somewhere , somehow?... Anyway I dont know what to do, Does anybody have any suggestions?
    Oh and I have also uninstalled and reinstalled the Itunes program to make sure it is up to date. WOuld adding new songs to my library have caused this problem?

    1. Try Resetting the iPod. Hold Select and Menu for 6-10 seconds - until you see the Apple Symbol.
    2. Use iPod Updater to restore your iPod to factory settings.
    See if those two steps clear up your problem.

  • My Sony AVCHD cam is no longer recognized when "logging and transferring"

    I'll try to keep this short and sweet.
    I have some footage on a Sony HD cam.  When I connect it to the mac, the drive appears just fine.  When I go to "log and transfer" it no longer begins loading itself.  When I try to manually select the disk and open it, I get this - "(this drive)... contains unsupported media or has an invalid directory structure. Please choose a folder whose directory structure matches supported media."
    When I try this with my other identical Sony HD cam, it works just fine, like it always has. 
    When I try to "repair image," it finds no problems.
    The only difference between the two, is that the non-working one was plugged into a Windows machine to manually upload a couple MTS files to youtube.  No formatting was done.
    How can I get my FCE to recognize my camera again? 
    Thanks!

    I FIGURED IT OUT!
    I had manually deleted some videos via Finder but remnants of the files were still on the camera itself.  So, by looking in the STREAM folder, I could find where there were gaps, locate those files on the camera and then delete them.  Once these "ghost" files were gone, my camera popped up in the Log and Transfer window immediately.
    Hallelujah. 

  • My camera is no longer recognized by firefox and won't work in websites such as facebook etc. Is this because of a plug in? How do I restore origical settings?

    In both my gmail and facebook, firefox does not pick up/turn on my iSight camera when it should, saying there is no camera detected.

    I'm having the same problem... just got a new iPhone 3GS in addition to the older 3G model. I need to synch them both with home (music, photos, videos etc. master) and work computers (Contacts, Calendar master).
    This worked no problem on the older 3G model, the 3GS synched with my home computer but my work once I get the following message: "iTunes cannot read the content of the iPhone. Go to the summary tab in iPhone preferences and click restore to restore this iPhone to its factory settings".
    I've tried re-starting both iPhone and computer, un-installing and re-installing iTunes / QuickTime / Apple Mobile Device Manager etc.; different USB ports etc. and still the problem exists...
    Please help.

  • Sony Cybershot No Longer Recognized in iPhoto

    Just did a recent software update that my iBook let me know about this past Saturday. One of those updates I installed involved something to do with importing pictures from cameras. Now, my Sony camera is no longer recognized in iPhoto and I never had any complication with this before the update. Is there a way to reverse the installation of the upgrade or is there a soltuion?
    Message was edited by: JC Santos

    This sounds more like a software problem than an iBook problem. You might try posting your question in the iPhoto forum where all the smart photographers hang out. They probably have experience in dealing with this sort of issue.
    Good luck!

  • Since installing Leopard, my iPhone is no longer recognized by iTunes.

    Since installing Leopard, my iPhone is no longer recognized by iTunes and cannot synch, my music, videos, address book, and calendar. Could you let me know how I can get iTunes to recognize my iPhone again? It is odd since i plug the iPhone into the iMac and it is no longer recognized in iTunes and my address book and calendar. It worked fine before installing Leopard. You assistance is greatl

    Hi
    Have you tried the iPhone forum yet:
    http://discussions.apple.com/category.jspa?categoryID=201
    Steve

  • Since installing Leopard, my iPhone is no longer recognized by iMac

    Since installing Leopard, my iPhone is no longer recognized by iTunes and cannot synch. Could you let me know how I can get iTunes to recognize my iPhone again. It is odd since i plug the iPhone into the iMac and it is no longer recognized in iTunes and my address book and calendar. It worked fine before installing Leopard. You assistance is greatly appreciated.

    Joseph Pascal wrote:
    Thanks Jason. How do I run the software updated?
    Click the Apple(top left corner of the screen)> Software Update.
    http://docs.info.apple.com/article.html?path=Mac/10.5/en/11410.html

  • Xbox Controller (Wired) won't connect to PC for gaming. Please Help!

    So, I bought Dark Souls and I would like to use my Xbox controller. I acquired the drives necessary and had it automatically download the other drives once plugged into my computer, but the Microsoft Xbox 360 Accessories Status does not recognize that the
    controller is plugged in there for it does not let me play using the controller. It, also, does not pop up saying that a joy stick controller is plugged in when I go to joy.cpl through Run. 
    Can someone please tell me what is wrong or what I could do to fix this? I have uninstalled the drivers multiple times and reinstalled and that has not worked either. I really want to start playing Dark Souls!

    Hi,
    Have you tried reinstalling Windows software for Xbox 360 controller?
    http://support.xbox.com/en-US/xbox-on-other-devices/windows/xbox-controller-for-windows-setup#88e4f84c93ca4c8c9e0e22da6d5a37a6
    Andy Altmann
    TechNet Community Support

  • I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac.  Any suggestions?

    I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility.  Any suggestions?

    Is the computer in you equipment line:
    Dual Core Intel Xenon
    (which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
    If a Mac Pro, their forums are here:
    Mac Pro
    and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
    If you really have a pre-2005 PowerMac, read on.
    If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
    The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
    Get a powered USB hub (has its own power brick
    Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
    The second gets power from two USB ports on the computer and often that's enough.
    Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

  • I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine until I deleted an app in error.  When I downloaded it from iTunes, my account is no longer recognized by the app's host servers.  Can I go back and re-sync one app from my old phone?

    I upgraded from iPhone 3GS to iPhone 6.  Everything converted fine.  Yesterday I deleted an app in error.  When I downloaded the software it from iTunes ( did this many times on the old 3GS), my account is no longer recognized by the app's host servers (Playtika), even though it did after the initial conversion.  Can I go back and re-sync just one app from my old phone?  

    Try deleting what is called the iPod Photo Cache. 
    http://support.apple.com/kb/TS1314

Maybe you are looking for

  • Is there a log entry indicating the use of battery backup?

    I have a Late 2013 iMac, 27" i7 780m running Mavericks 10.9.4 - Is there an entry in any of the System Report logs that shows whether or not the computer had to make use of a UPC battery backup? I've experienced some of the same issues people have ha

  • Outputting Lossy Dolby Digital & Lossy DTS 5.1 audio via HDMI - Dv7-4074 Win 7 64bit ATI HD 5650

    Hi Everybody I'm trying to output lossy DD & DTS 5.1 soundtracks via HDMI to my HDTV then to my AV receiver via optical. Two channel LPCM works fine. I checked for updated drivers for both the ATI HD 5650 AV Card and Win 7; says both are current vers

  • SQL Developer - Cannot see list of tables in my connection

    Hi - when I downloaded and started to use the SQL developer tool, once I connected, I could see all of the tables/columns in my connection on the left side of the tool, and I had my query panel, results panel, and SQL history stacked on the right. Su

  • BEx Query Execution problem

    Hi, I got a problem when I click Execute button in Query Designer to run a query. It popup a IE windows with a URL like below http:///irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fcom.sap.pct!2fplatform_add_ons!2fcom.sap.ip.bi!2fiViews!2fcom.

  • Automatically shutdown auxiliary after DUPLICATE complete

    This is in regards to 10.2.0.4 I am refreshing a Test system with Production data using the DUPLICATE command. I've searched via Google but haven't hit the right search phrase to find the answer to my question. Once the RMAN DUPLICATE command finishe