Xbox One and xbox 360 on the same Home Hub 4
I currently have an xbox one and 360 directly connected to a Home Hub 4 (with different internal static IP addresses allocated to the xbox units). I want to configure port forwarding on the Hub to enable access to xbox live and other gaming services.
I have created the game profiles one the hub and can allocate to one of the devices, but when I try to allocate (either the same or another profile), I get a conflict error.
I understand why this is happening and was wondering if there was a simple way to resolve this (without giving both xboxs the same IP address, and only having one online at any given time)?
Many thanks
Ian
WildWeasel109 wrote:
I currently have an xbox one and 360 directly connected to a Home Hub 4 (with different internal static IP addresses allocated to the xbox units). I want to configure port forwarding on the Hub to enable access to xbox live and other gaming services.
I have created the game profiles one the hub and can allocate to one of the devices, but when I try to allocate (either the same or another profile), I get a conflict error.
I understand why this is happening and was wondering if there was a simple way to resolve this (without giving both xboxs the same IP address, and only having one online at any given time)?
Many thanks
Ian
Hi there,
If you are using UPnP, then you will need to use what's known as "Port Range Triggering".
You can't use "Port Range Forwarding" as the limitation of this is that it expects the ports to be directed to one internal IP address.
The ports you need to forward are as follows:
53, 88, 80 and 3074.
Disable DMZ (should be disabled by default on the Home Hub 4, but double-check) and also disable "Port Range Forwarding", if this option is available.
Lastly, you will need to set your MTU to 1364 to avoid lag issues.
*DISCLAIMER: This is generic advice, sourced from the internet, so I cannot be held responsible for it's accuracy, as I don't use a Home Hub router*
EDIT: Here's a Youtube link that explains the process visually. Although the user here doesn't use a Home Hub, essentially the process is the same.
Similar Messages
-
My iphone was stolen. If i buy a new one and to register with the same Apple ID, my photos will be recovered in the new device?
If you have a backup of the old phone that backup contains camera roll photos. Restore from that backup to get your camera roll photos back
-
Post relates to: Treo 650 (Cingular)
I have had an issue that I have been dealing with for about a year that sounds just like this. I found they were due to poor electrical connections. Check and clean all the electrical connection contacts for the battery to the phone, and the phone to the cord. Because I had plugged and unplugged the phone so much, the hole for the power cord was very dirty and had become quite worn and was bigger than it should have been. I first did like you and got a new cord, this helped but I still had issues. So because I was cheap and did not want to send the phone out for repair to replace the worn parts, or get a new phone, I spent some time and rigged it up nicely. After cleaning the contacts on the phone, I started working on the cord to tighten it up. So with the charger unplugged from the wall and the phone, I very carefully pried up on the contacts that plug into the phone so they would stick out a little more. This helped, but not good enough. I then tried to tighten up the worn hole. At first, I used a small piece of trimmed electric tape that made the plug thicker, this worked, but the tape kept coming off. When I finely got tired of that, I cleaned the tape off of it and started building up several thin layers of superglue making sure not to get it on the contacts. After I was sure the glue was fully dry! I plugged the cord in the worn out hole and it fit, and worked like new. That was almost a year ago. I have had to re-apply glue once after it had wore down some. I also found that a desk charger where the phone stands up works pretty good. It still has and issue from time to time. I just have to wiggle it a bit and I can get it to work.
Best of luck with your issue. -
I have never previously had any problems with Home Sharing, I have always found it to be completely reliable as advertised. I have 2 computers in the house, (one MacBook and one Windows Desktop) connected to the same Home Sharing account, connected to the same BT Home Hub 4. My situation is that I have nearly 2TB of data of which I would like to share with the home wirelessly, in my mind the desktop is the logical place for this to be shared from.
When running, iTunes on this desktop broadcasts to other iTunes libraries, but no other iOS devices or Apple TV's connected to the same Home Sharing account cannot see it.
I have tried turning Home Sharing off, and then turning it back on, closing iTunes, restarting the computer, going to Network and Sharing Centre and unticking IPv6 in the network adapter properties, even completely wiping the computer and reinstalling Windows 7.
One of the Apple TV's in the house was recently purchased by my parents with the promise from me that everything would work seamlessly... so far it isn't and I am frustrated that the Apple technology that I have come to rely on isn't working as expected.
One thing that has occurred to me upon writing this is that it is a very large amount of data, and I have not attempted to share this with another computer that is currently working and broadcasting it's Home Share fine.
I am sorry if I have ommitted any important details, any further questions don't hesitate to ask. I would be so grateful of any suggestions, my parents are depending on me.I have found with AppleTV that it is the IPV6 on the computer you want to access is the problem. The issue is that Homegroup on Win 7 or Win 8 requires IPV6 to work, but AppleTV won't work with IPV6. (So maybe double check you have IPV6 turned off)
So you have to make a choice - Homegroup or AppleTV.... but you can't have both, until Apple brings ATV up to date. (crazy that it does not recognise IPV6 - c'mon Apple!)
You can set up sharing individually in Win 7 or 8 and have the ATV access files that way.
Having said that, there is always the exception.. I have an old HP home server running Win8 and it services ATV - but is part of the Homegroup... have no idea why it works on both, but no other machine on the home network will talk to both ATV and Homegroup at the same time! -
Set up my xbox one and HH5 on a wired connection. My d/l and u/l speeds are only around 10mbps also my Nat is moderate. Tried my old HH3 and speeds are 75mbps down and 17 up, but Nat is still moderate. Have now gone back to HH5 and did hard reset on router and still have the same problems as mentioned above. I also deleted any mention of my HH3 in my manage network connections.
My xbox 360 worked fine with open nat and fibre optic speeds. Any have any idea on fixing this as i have been trying for the last 4 hours.
ThanksI had problems with Xbox one and HH5.
I have set my HH5 up this way and dont have any problems, with XB1 or any other device connected to the HH5 (wired or Wirless)
Makes sure you have seperate ssid for both 2.4 and 5 Ghz wirless networks.
Turn off upnp.
Turn off Smart setup.
Save
Reboot router.
Enjoy -
$90 off Xbox One and Evolve Purchase
Hello,
Over the weekend I purchased an Xbox One and Evolve for the Xbox One. There was an offer that advertised that $90 would be discounted when purhcasing the two in the same transaction. The Xbox One was $349.99 and Evolve was $59.99. As such, the pretax total should hav been $319.98. However, the pretax total turned out to be $365.98. I was wondering what went wrong with my transaction, and if someone could provide assistance.Hello lznd661,
Thanks for writing in, and thank you for being a My Best Buy Gamers Club Unlocked member. I'm happy to review your concerns today.
As richmoral mentioned, the $90 is taking into account the $50 gift card, so you see on the receipt both the $50 off the console (which takes toe console to the current sales price) and $50 out of that price which is for the free gift card. Then $40 is taken off the game. Gamers Club Unlocked benefits are then applied to the game, bringing you to $94 off.
I hope this helps clarify things for you, but please let me know if there's anything else I can do to assist you today.
Best regards,
Mike|Social Media Specialist | Best Buy® Corporate
Private Message -
I have family plan of 5 iphones and all them have the same apple id, the q. is how I can set each one with their own apple id? please advise...
See How to Stop Sharing an Apple ID.
(Note that I am affiliated with that site, and some pages contain ads). -
Can I use more than one blue-tooth device at the same time on IPhone 4S? Like a wireless headsets and speed and cadence sensor for cycling computer, receive the data and listen music simultaneously
As long as the profiles are different (ex. HID vs AD2P) you will not have any issues. But say if you try to use 2 keyboards at once, it won't work. Or 2 headsets at once. Your scenario seems fine.
-
Moving Events and Projects from one location to another on the same hard drive.
Hello.
I've searched in the FCP X User Manual, on this forum and in Google, but have found no explanation of how to do this, so I'm posting this here in hopes that someone in our community will be able to help.
I've previously stored my FCP X Events and Projects folders on an external 3TB hard drive, because there is more room on it than on the internal 1TB hard drive, but, since then, I've worked with other media apps, for video, photography and audio, the files for which are also stored on the external hard drive, and this has created a bit of clutter with no folder structure to keep it tidy.
I like an organised file structure on my system, to keep it uncluttered, easy to navigate and efficient to use, so I put all the files for my photography, video and audio apps into their own folders, which are, in turn, stored in their appropriate folders for Audio, Photography and Video, and those three folders are stored in a folder called Media, and then I directed each app to its own files.
The only app with which this has been a problem is FCP X. While there is a way of relocating projects and events from within FCP X, it allows the user to move them from one hard drive to another, and not, as I want, from one place to another on the same hard drive.
I'm not sure if it matters, but perhaps it's relevant to mention before the next paragraph that the files that had previously been imported as events are, to save hard-drive space, stored in the events folder as shortcuts to the original files, which are stored elsewhere on the drive, rather than as duplicates of those files.
In Finder, I copied the Events and Projects folders to their intended new locations and tried in the app to link the events and projects to their new Finder location. It seemed to have worked, until I moved the original folders to the Trash. On re-opening FCP X, it was clear that the linking hadn't worked. I returned the original folders from the Trash to their original location, but that didn't entirely reverse the problem. I noticed also that, in the original and duplicated Events folders, the shortcuts had lost their links to the original files stored elswehere on the drive.
Fortunately I had run a backup before starting, so I restored the original folders and the app from the backup, and all was back to normal.
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
Thank you.Ludio wrote:
I'd be grateful if anyone could advise me on whether or not it's possible to move FCP X events and projects from one place to another on the same hard drive with the app's compliance.
I
Message was edited by: Russ H Apparently mis-read the questions. -
i have two sets of devices one ipad, iphone and mac which i use and one iphone ipad and mac which my wife uses
now is it possible to have two sets of contacts and calendar synchronised for her devices and one for my devices using the same icloud account
i dont want a separate itunes account as we use the same music books and apps to be automatically downloaded which is very convenient
please guideYou can set up different iCloud accounts on each device using different Apple IDs (to keep your mail, calendars, contacts, etc. separated), and still share the same iTunes account (in Settings>Store on your device). There is no requirement that you use the same Apple ID for purchases and for iCloud.
-
Is there a way to order multiple different prints in any quantity from Iphoto? it appears currently like I would have to ship each separately, even if only one print... is there a way around this so I can can get several DIFFERENT prints of any quantity and ship all at the same time?
Sure - easiest way is to make an album for photos you want to order and drag photos to it - when it is complete open the album, select all and order
LN -
Who can shed some light on my ongoing connection problem.
After upgrading my iPad Air with IOS 7.06, I could no longer connect to the internet.
I have 2 MacBooks Air, 1 ipad mini and one iPhone 4S running on the same network, and they are all connected to the net and function well.
So I cleaned up the ipad completely, installed the latest firmware and reinstalled my apps : no connection.
I tried all things of resets and forgets. No result.
I have been fondling with my Airport Extreme 5 , but that did not help much.
This morning I went to a neighbor , hooked my ipad air on his network, typed the password and the thing all worked fine.
I have tried to connect the ipad air as an ethernet client, but that did not work. „Not enough power“ was the statement
Ideas anyone ?Yes I tried this manyfold. But did not work. Reading on, I took Tesserac's advice. Shut down router and computer.
Start router after 15 minutes and wait another 10 minutes before starting the computer.
Et voila.... everything is back in working order,
Regards form Curacao, Dutch Caribean.
Pete van Linden -
I cannot open a movie in my e-mail and it is from the same phone that I opened one from earlier.
Hi Gary,
I have seen this issue occur with users who have this registry setting missing or have improper permissions.
When you double click the attachment to launch the pdf it is saved and opened from the temporary folder unless saved specifically to a location.
If you dont have the below mentioned registry key or improper permissions then attachments fail to open.
Please heck if the following reg key exists:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
or
HKEY_CURRENT_USER\Software\Policies\Microsoft\Office\14.0\Outlook\Security
Value Name: OutlookSecureTempFolder
If the value exists, and if the value contains a valid path, Outlook 2010 uses that location for its temporary files.
If the registry value does not exist, or if the value points to an invalid location, Outlook 2010, Outlook 2007, or Outlook 2003 creates a new subdirectory under the Temporary Internet Files directory and then puts the temporary file in the new subdirectory. The name of the new subdirectory is unknown and is randomly generated, depending on your version of Outlook.
Please check the following key:
HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Outlook\Security
Note the location for: OutlookSecureTempFolder key
Check if the same folder exists in the following location and if not create a corresponding folder in the location on C:\Users\<User account name>\Appdata\Local\Software\Microsoft\Windows\......
Regards,
Rave -
A 6 and a 6 Plus with seperate phone numbers are receiving txts sent to only one number. They share the same iTunes acct. Is this the problem?
Hmm... Just found out the 6 and 6 Plus were updated to 8.1.1 today. Coincidently, that's when this started.
Another thing is both phones ring and you can answer either one, or both. fwding is not selected.
Thanks Kilted Tim. -
Why Left and Right Joins if only one of them can serve the same purpose?
I understand that left join is used to display all the records from left table whereas the right join is used to display all the records from right table in a join.
However, if we switch the positions of the join tables and perform left join we can get all the records of the left table.
A left join B -> will give all records from A
A right join B ->will give all records from B
B left join A -> will again give all records from B.
The order in which the data is displayed(ie the field order) can also be maintained in the SELECT clause.
So, Why do we have left and right joins separately in existance, when only one of them can serve the same purpose?Hi,
I think it's because it is sometime more natural to outer join on left or right.
In your data model (or the query you are writing), there is some kind of hierarchy between tables : I feel more natural to have the table with lowest hierarchical level (the root table) on the left. So I sometimes prefer to right outer join...
This is a very personal feeling, I must admit.
To me what is strange is to have chosen left and right as they refer to a "latin" reading direction => forward join and backward join would be more meaningful for people that read from right to left.
+And I prefer the new joining syntax that doesn't us the {noformat}(+){noformat} sign...+
Maybe you are looking for
-
What the difference between u0093Valuate GL Account Open Itemsu0094 and u0093Valuate G/
hi gurus What the difference between Valuate GL Account Open Items and Valuate G/L Account Balances? We found out that when we perform valuate GL account Open items there will be reversal done at the same time whereas when we perform Valuate G/L
-
Duller colors from Camera Raw to Photoshop: why?
Hello! I'm opening my Canon 70D RAW files with Camera Raw 8.4.1. After this step, I open the corrected file in Photoshop CC. At this point colors have changed, everything is duller and less contrasted. See image. Camera Raw color management: Adobe RG
-
Qosmio G30-176: TV tunner issue - blurred without any sounds
I from the seychelles and we use a Pal System similar to that in the UK, but I cannot tune the TV Tuner. It always comes out blurred without any sounds. Can somebody please help?
-
Why I cant type correct single quotation mark in SQL Server 2014 (Please see the pic below)
I start to learn SQL Server 2014 by myself just several days ago. As shown above, I tried to input the code in the guide book for exercise like I do before. However, it seems to have some problems this time. I cant type a clos
-
Hi, I have been developing forms in LiveCycle Designer and have started to look at doing some of these in Flex. The aim is to have some hosted on a web site or grouped in an AIR application. I am working through online resources and tutorials (Tour d