Xbox One not being displayed on monitor; Please help!

The monitor will not display the Xbox One's output. I've tried everything, I've unplugged both the monitor and Xbox, unplugged the HDMI from both devices and turned them both on and off. The monitor will not pick up the signal and says "HDMI:No Signal" and then "Monitor going to sleep". Thanks for the help!

I have the same problem for my computer and for you it's most likely you have a dying cord try to run out and buy a new one or borrow one from a friend to be check which cord is messing up

Similar Messages

Ipod not being detected by windows. please help!!!

I have an iPod 30 gb. Serial No- 8L647801V9K
Its about two years old.
All of a sudden one fine day, it stopped showing up on my the computer. Neither does itunes detect it nor does internet explorer. A bubble shows up saying the usb device attached has malfunctioned. It doesnt even charge.
I tried resetting it(centre + Menu)
then i thought my usb cable was bad.
i bought another one and the same problem continues.
i even tried the diagnostic option in itunes to detect ipod.
the ipods completely dysfunctional when connected via either of my two cables.
the 'do not disconnect sign' doesnt come and neither does the battery charging one.
there's nothing wrong with my computer or my usb because i tried my ipod with two other computers as well.
But funny enough, the ipod charges with the adaptor.
im totally stumped
i hope i manage to get this issue sorted out.
i feel lost without being able to update my ipod or sync my playlists.
please help me
thanks

Promi wrote:
I have an iPod 30 gb.
Its about two years old.
So then it is a Classic model and not a 5th generation model?
Promi wrote:
there's nothing wrong with my computer or my usb because i tried my ipod with two other computers as well.
AND??? The iPod did or did not work with the other two computers?
Patrick

My ipod is not being recognized by computer please help

my ipod is not being recognized by my computer....anyone please help

- Try manually placing the iPod in recovery mode. For recovery mode see:
iPhone and iPod touch: Unable to update or restore
- Next, try placing the iPod in DFU mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings

MegaView 566 not being recognized by PC - PLEASE HELP!

I purchased a 566 yesterday. The PC has only been able to see the 566 in Device Manager intermitently, and not at all in the last few hours. I've tried everything I can think of, including reinstalling the USB ports, scanning for new hardware in Device Manager, confirmed the cables and ports are ok, etc. Stangely enough, the 566's display shows that its connected.
I'm ready to return this unit but don't want to until I'm sure its the unit and not somethign else.
I see there's a firmware update for the 561 but not the 566. Is there one forthcomiing?
Thanks in advance for the help.

Why don't you uninstall service pack 2 to see if it is the cause?
See: http://www.tech-recipes.com/windows_tips624.html for instructions on how to remove it.
You can always install service pack 1 for USB 2.0 support.

IMessages not being sent from iMac - please help!

Over the past month or so, when sending messages from iMessage on my iMac, i get a red exclamation point and a "Your message could not be sent". I have to try 2-5 times for it to finally send. I can receive messages just fine (though delayed for some reason). iMessages also usually work just fine to/from my phone. I am only really having troubles SENDING messages from my iMac.
I'm running 10.8.4 on a 27" iMac (previous aluminum version)
Thanks!
Andy

HI,
Try booting into Safe Mode
After this has Logged in restart the computer.
10:08 pm Friday; July 26, 2013
 iMac 2.5Ghz 5i 2011 (Mountain Lion 10.8.4)
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb (Snow Leopard 10.6.8)
 Mac OS X (10.6.8),
 Couple of iPhones and an iPad
"Limit the Logs to the Bits above Binary Images."  No, Seriously

TS1363 Ipod older one not work properly?? please help me??

i have ipod old model 60gb whin i connect my ipod with my pc itunes not show my ipod icon in itunes my ipod screen show me the icon pluged in your desktop charger i gona pluged in my charger but my ipod dont show me any activity on his screen plz help me ????

Never mind it worked now thanks

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?

All day calendar events not being displayed in the notification centre for iphone 5 post ios 7 upgrade. Please help. Is it a bug?
With iOS 6, the all day events showed up in the notification centre but it lacks in the upgrade iOS 7.

Same problem here. Some people pointed out that all-day events do show up in their notification center, but that seems only to be the case for birthdays (and only as text like the weather). I've tried it myself on my iPhone and iPad and it did work for birthdays but not for any other all-day events. I already sent this to Apple as a product feedback as well, as should everyone of you. The more people mention it, the faster Apple's going to fix this issue. In its current state, notification center is not a very helpful feature in my opinion. There's absolutely no point in not showing all-day events in the 'today' calendar overview.
Here's a link to the product feedback page: http://www.apple.com/feedback/
I posted my message in the iPhone section since I couldn't find a page specifically dedicated to iOS 7.
I really love the look & feel of iOS 7 but it's kinda sad to see notification center not tapping its full potential.
Cheers!

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

I just switched from Outlook to Mail and now the sent messages are not being displayed. Help, please.

Back up all data. Rebuild the mailbox.

Inspection Characteristic is not being displayed in the inspection lot

I have created a Calibration order by first creating method, then a MIC, same is attached to a task list and then a Plan.
But when i trigger a order for that task list the inspection characteristics as mentioned in the task list does not appear in the order.
Please let me know how to get the inspection characteristics in the order.
I have checked the task list, in that the Inspection characteristics is visible.
Please help
Praneet

I have noted one thing, in inspection lot the sample size is shown as zero for the equipment where the inspection characteristic is not being displayed and it is shown as one for the lot where the inspection characteristic is displayed.
Both the Inspection lot the task list is same
Please reply

Coulmn values is not being displayed in obiee 11g

Hi All,
Below is the sample xml generated from data structure.
++
+<DATA_DS>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331403</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140302</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD1</PRODUCT_NAME>+
+<REVENUE>3924973.97</REVENUE>+
+</G_1>+
+<G_1>+
+<LOCATION_NAME>ABCD</LOCATION_NAME>+
+<PRODUCT_ID>1012331401</PRODUCT_ID>+
+<PRODUCT_SUBID>101233140104</PRODUCT_SUBID>+
+<PRODUCT_NAME>ABCD2</PRODUCT_NAME>+
+<REVENUE>688244.58</REVENUE>+
+</G_1>+
+<G_1><LOCATION_NAME>EFGH</LOCATION_NAME>+
+<PRODUCT_ID>1011165401</PRODUCT_ID>+
+<PRODUCT_SUBID>101116540101</PRODUCT_SUBID>+
+<PRODUCT_NAME>EFGH1</PRODUCT_NAME>+
+<REVENUE>3763099.99</REVENUE>+
+</G_1>+
+</DATA_DS>+
We were unable to see the REVENUE column values in the report. We were able to see the values while creating layout, but unable to see the values in report. Report is not having any filters or parameters. This is build on two tables. Revenue in one table and details in another table.
Thanks.

Hi,
Just noticed that, able to see column values in HTML, pdf views but unable to see in interactive view.
While creating the layout checked in Interactive view, at that time able to get column values, but in the report column values are not being displayed in interactive view.
But in HTML, list option , Repeating Section is not working, so have to see in interactive view only.
I can say, in Interactive vew Aggregate functions are not working properly. We need tro use Repeating Section and List option in report. so we need interactive view only.
Any ideas..
Thanks.

IView is not being displayed in full page

I created one iView, added it into a page. I set the layout as 1 Column Full width. My view is not being displayed in entire window. What kind of property, I should set in the page.

Sunil:
By default, the iView's height property is fixed. After I changed iView's height property to Full page, The page displays correctly.
I setup two views in one page using one column Full width. Both the iviews are setup in one page. Now both the iViews height is set up to Full Page as well as page's height is setup to Full page. Now, the Top iView is being displayed with 3/4th of window size and bottom iView is being displayed with 1/4th of window size. I want to display both of them with equal size.
Thanks for your help.

Images not being displayed in metro apps

OS: Windows 8.1 enterprise
Images are not being displayed (a small cross mark shown on the left) when I open metro apps that I download from Store. The store as well doesn't show images. I am able to see images in some built in metro apps like travel and weather.
What's the fix. I guess the company network is blocking it. What is the work around?
Thanks.
NOTE: This is WINDOWS 8.1 METRO UI issue. It doesn't have anything to do with VISIO. The only option that I had to choose when i selected Windows 8.1 is VISIO. This site appears to be broken and not user friendly.

Hi,
Which metro app did you download and occur the issue? As you post the question in Visio forum, did you use Visio 2013 preview? As far as I know, the version had been off the store after the official version released.
If I misunderstand, please give me more information (Such as App name) or images about your question.
Regards,
George Zhao
TechNet Community Support

RE: [iPlanet-JATO] TileView not being displayed

Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed]

Craig.you are quite the JATO expert now!
cb
-----Original Message-----
From: Craig V Conover [mailto:<a href="/group/SunONE-JATO/post?protectID=219212113009229091025149066024064239039098124198039130151196028">craig.conover@S...</a>]
Sent: Tuesday, April 17, 2001 8:11 PM
Subject: Re: [iPlanet-JATO] TileView not being displayed
I had this issue a while ago and forget the exact solution Todd gave me, so
I'll take a guess untill I can find it somewhere or untill Todd or Mike get
back online to verify.
Set the size of the model. I know your TiledView is not bound, but actually
it is - to the DefaultModel.
Try this:
getDefaultModel().setSize(1)
getPrimaryModel() should work as well.
let me know if that works or not
If I find my example, I'll repost.
c
----- Original Message -----
From: MShanmugam@c...
Sent: Tuesday, April 17, 2001 7:38 PM
Subject: [iPlanet-JATO] TileView not being displayed
Hi All,
I have a TileView which is not bound to any models.
It should display one row however none are being displayed. Following
is the constructor as a reference.
public pgVoucherListrptCheckInfoTiledView(View parent, String name)
super(parent, name);
setMaxDisplayTiles(1);
setPrimaryModel((DatasetModel) getDefaultModel() );
registerChildren();
initialize();
The problem in the nextTile() method, the super.nextTile allways
returns false. This seems to be because the
TiledViewBase.getPrimaryModel().next() allways returns false.
All the bound tiled views work fine.
Any help will be appreciated .
Thanks
[email protected]
[email protected]
[Non-text portions of this message have been removed]

[svn] 1978: Bug: vendors. properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly .

Revision: 1978
Author: [email protected]
Date: 2008-06-06 08:05:34 -0700 (Fri, 06 Jun 2008)
Log Message:
Bug: vendors.properties file which is used in vendor specific login commands was not being read properly and as a result some login related error messages were not being displayed correctly.
QA: Yes - we need automated tests to make sure that errors.properties and vendors.properties in BlazeDS/LCDS are loaded properly.
Doc: No
Modified Paths:
blazeds/branches/3.0.x/modules/common/src/java/flex/messaging/util/PropertyStringResource Loader.java
blazeds/branches/3.0.x/modules/opt/src/jrun/flex/messaging/security/JRunLoginCommand.java
blazeds/branches/3.0.x/modules/opt/src/tomcat/flex/messaging/security/TomcatLoginCommand. java

I have a lot of grief with this version of Windows Media Player.
It is very buggy and frustrating to use.
I have my Music library on a QNAP NAS, which is as reliable as they come.
System notifications make it not save changes. It also does not do a good job of interpreting albums and artists from folders. Changes to track names are not saved, nor are tracks moved to other albums, renamed albums, changes to genre, artist
or date. It separates and merges albums/tracks without sense or reason. Some changes I've made up to 4 times, then closed WMP and re-started my machine to check if it has/hasn't saved the changes. Often it has not.
This is the first time I've used WMP in this capacity, and I do not recommend it.
New service pack please.

Images are not being display in people search for few users - why ?

Hello,
In my farm, users having profile picture in UPSA and they are able to see in My Profile page as well.
However when I find user in People search - images are not being display for few users while for others it works.
I have checked picture property which is indexed and then I run full crawl still its same issue.
Following are the settings for Picture Property - would you please let me know why its still not being display in people search ?
Dipti Chhatrapati

Dipti,
Hope below urls will help you,
https://littletalk.wordpress.com/2010/12/10/people-search-result-doesnt-have-images-in-sharepoint-2010/
https://social.technet.microsoft.com/Forums/office/en-US/eea8aa10-4565-41bf-98ec-dc93fb600021/some-users-pictures-are-not-showing-in-people-and-groups-but-are-viewable-in-the-thumbnail-and-my?forum=sharepointgeneralprevious
http://westerdale.biz/sharepoint-2010/display-active-directory-profile-thumbnail-photo-and-other-attributes-in-sharepoint-2010?doing_wp_cron=1421939809.4895009994506835937500
Sudip
Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

Xbox One not being displayed on monitor; Please help!

Similar Messages

Maybe you are looking for