XBOX, Optical-in, Audigy 2 Value, 5.1 Speak

Im told 'Audigy 2 Value' comes with an Optical I/O adaptor like this:
http://price.danawa.co.kr/product_bo...05J/img002.jpg
http://price.danawa.co.kr/product_bo...005J/img00.jpg
at least in my country...
Will the below setup work? Any advice appreciated.
XBOX > AV Adaptor Optical-Out > 'Audigy 2 Value' Optical-in > Audigy Dolby Decoder > Logitech X-530 5. Speakers > 5. Surround Gaming!!
Also, anything I should be concerned about? e.g. pc crashing, lag, etc.
Thanks in advance.
Message Edited by brightblack on <SPAN class=date_text>0-9-2005 <SPAN class=time_text>05:08 AM
Message Edited by brightblack on 0-9-2005 05:9 AM

im looking for an answer to this question too

Similar Messages

SB Audigy Value CMSS Successfully Enabled in Vista, if you call it CMSS

I've been trying to enable CMSS (at least hear sound from all of the 4 speakers) for a long time and finally successed but in a very strange way.
Steps written below are spesific to my system (SB Audigy Value, Onboard Realtek ALC 850) but can? work similar way on others i guess. For SB Audigy Value 6 Feb. Vista drivers are installed. U can use old XP drivers as explained in the forum too.
I've been using my onboard audio device (realtek ac97) since I can't enable cmss on SB Audigy Value, so Realtek AC97 audio drivers were installed on my system. You can download Realtek AC97 audio drivers? from [url=ftp://202.65.94.22/pc/audio/623_Vista_APO.zip">ftp://202.65.94.22/pc/audio/623_Vista_APO.zip[/url]
Download and install it (first enable the device from bios if you haven't)
After installing the drivers,
-) Open "Playback Devices/Speakers(Realtek A'97 Audio)/Properties" window and open "Enhancements" tab.
2-)There's a "Speaker Fill" effect there. U can take sound from all speakers if u enable it on Realtek AC97 device. And let's import this to our SB Audigy Value device. I say "Import" because i noticed that?"Enhancements" tab is actually a set of registry entries which points to some features from Realtek device. So,
3-) Open registry editor. Go to
[HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Curr entVersion\MMDevices\Audio\Render\
Under the Render key the playback devices are listed as some numbers and letters like,
{50a7cf0-aad0-444c-a56b-ce655444d}
4-) U have to find your own device (realtek speakers) , for instance my device is represented by {50a7cf0-aad0-444c-a56b-ce655444d}.
(This is for Realtek ALC 850 model, may be different for other models?I guess)
5-) Under {50a7cf0-aad0-444c-a56b-ce655444d} key you can see "FxProperties" Key. Rightclick on it and export to a file. Save it as RealtekCMSS.reg for instance.
6-) Then find your SB Audigy Value Speakers device. (ES/LS whatever...)
Mine is {5ecbbccc-eca-446-aa2-a7390cf094f6}.
7-) Rightclick on it and select "Permissions"
Go to Advanced/Owner, and change the owner to administrators.
(Don't forget to select "Replace owner on subcontainers and objects)
8-) On "Permissions for {5ecbbccc-eca-446-aa2-a7390cf094f6}" window select "Administrators"
and select "Full Control" to allow. Then click OK.
9-)Close registry editor and open RealtekCMSS.reg in notepad.
0-) Replace {50a7cf0-aad0-444c-a56b-ce655444d}
????to {5ecbbccc-eca-446-aa2-a7390cf094f6} using replace function.
-)Save the file as SBAudigyCMSS.reg and execute it.
2-)Now go to
"Playback Devices/Speakers(SB Audigy)/Properties" and you'll see "Enhancements" tab.
3-)In "Enhancements" tab enable "Speaker Fill"
Open an mp3 and test your speakers. Other effects work too.
From now on you can disable your AC97 device from bios. But don't uninstall Realtek software.
Message Edited by atabrk on 04-26-200708:09 PM

The previous post is inaccurate:? CMSS includes many modes, which will work depending on the speaker configuration. This means that CMSS set?to ON on 5. speakers is not the same as CMSS on Headphones. The selection is done automatically, depending on your selected speaker configuration. For example CMSS on headphones uses HRTFs to produce the effect, while on multi-speaker systems it simply maps and pans the sound. From my experience, CMSS works?good on headphones, not only for games, but for music as well. It expands the soundfield, where on simple stereo and headphones you normally hear the sound inside your head. My opinion is, that CMSS sounds much better on headphones than on speaker systems.

Audigy Value users.. enter your vista 32bit problem here

i am experiencing a problem from the driver release of SB audigy value for vista 32 bit?my card is sound blaster audigy value 24 bit 7. st I install the driver... works great2nd... play games..3rd...play music mp3's4rth restarted my computer5th play again...6th restarted again...7th after windows vista open... its automatically detecting pci to pci bridge, and multimedia audio controller(means it got disconnected automatically and been detected again and reset it's setting to default)?8th... when i click the playback devices @ the taskbar and click speaker and go to properties, advance... 96khz and 24 bit is gone... i can make it work again by uninstalling the driver and all of its components and intall it again... and then a few restart later the problem will happen again?i've'' been testing this alway's? when i am using winxp i did not experience anything like this before.. check my board and soundcard to other pc which have win xp its working great... so that mean's your driver has a problem... it's about compatibility....
kindly help me with this problem... thanks...

Hi, thanks for your answer!-)
I cought some virus and I think it was hidden in power saver and after the infected file was deleted, I turn on my notebook and the first message what I see is that the toshiba power saver has an error and would be closed. I don't know what power saver it was, I've tried to install a driver for XP , but it doesn't match here.
Sorry for my english =)

SB Audigy Value Windows XP applications All functions includin What U Hear working Proper

I have SB Audigy Value Card (SE/LS/ Li've 24 bit)Windows Vista 32 bit SP Classic Windows XP applications, Creative EAX SettingsCreative Graphic EqualizerCreative Speaker SettingsDevice Control And XP Drivers 5.2..54 Driver Date: 3.06.2007 Digitally Signed All the settings including "What u Hear" function work flawlessly under 4. system. (I didn't try 5./7. but I think it should work) I just mixed the applications from old and new driver packages and tricked the set-up program to install the XP drivers instead. I'm not a sound expert but I'm much more satisfied with tihs driver especially while listenig to music. I didn't try it with any games so I don't know. Download Link:http://rapidshare.com/files/9395098/...e0077.exe.html All the files included in this package are Creative's property.

I've spent ages searching the forums and can find other people who have experienced the problem but have yet found a fix. They've also explained the problem better so I'll try and make this a little clearer also.
When using Ventrillo first people can hear me fine in Ventrillo but an awful sound (described as the sound of 000 demons) in Counter Strike.<
When using CS first people can hear me fine in Counter Strike but the screeching sound is heard in Ventrillo.<

New Audigy Value card completely nonfunctional in windows server 2

Hi all,
I just bought a new Creative Audigy Value card for use in a windows server 2008 system that will control the electronic school bells system in the academy I work at. It's desperately important that we get a sound working on this server so that the bells can ring again.
Anyway, so here's the problem - the sound card, once installed, says that it is installed properly (i've used x64 vista drivers .0077 and .0065A from creative's website, installed and reinstalled several times) but in the vista system tray, it just shows the speaker with the X on it. When you click "go to mixer" it says "there are no audio devices installed."
In the audio properties, you can see the icon for the "sound blaster audigy", but although you can SEE the buttons for "configure" and "test" - clicking on them yields nothing at all.
I'm really at my wit's end here. The school needs its bell system, which this server plays through it's sound card. What can i do to get this sound card working like it's supposed to be? any ideas?

Yes, well, the box in the store had a sticker on it that said it was compatible with Windows Vista 64bit and 32bit, so I assumed that a 64bit server would be fine for it, but perhaps my assumption was incorrect.
At least if you tell me, that you're 00% sure that this card is not compatible with Server 2008, I will be able to move on and look for something else and use this card for a workstation instead.
As for the first commenter - thanks, but yeah I had already made sure that both the audio service and audio endpoint driver were automatically starting up with the server, so that's not the issue.
So, Mr/Ms Creative Moderator - I checked the page and it does not specifically mention Server 2008, just Vista. Can you let me know for sure that this card is not compatible? If you can tell me no, at least I can write it off as a stupid mistake. If you tell me that it should work though, I feel like I will have to keep trying to force this one to work.
Thanks!

Help needed with Audigy Value! Please he

I just bought the sound blaster audigy value sound card so after disabling the onboard sound, i installed the card and the softwares and drivers. What happened was that the speakers were only making sounds from the woofer and the front center speaker, the other 4 speakers were transmitting no noise at all. I checked the device manager to see if the audigy value card was to be shown as working properly, and it was.
In a state of I-should-find-something-on-the-net-to-help-me state, I downloaded the new official drivers from this creative website, opened it but a message appeared that "it has not detected any audigy hardware". (there's sound but only from the woofer and the center speaker).
I have a creative 5. inspire 5200 series. Do you guys think there's a problem with my sound card, my speakers or the configurations of the cables or some driver thing.
Any help will be appreciated and thanked.

Have you
- connected cables properly?
- set speakers to 5. (on speaker settings panel)?
- disabled/enabled CMSS
---- (see http://forums.creative.com/creativelabs/board/message?board.id=soundblaster&message.id=2563)
- set audio HW acceleration (Windows Audio settings)?
- tried to install drivers by these instructions?
jutapa

Audigy value Card: Getting it to work prope

I recently purchased a Creative Sound Blaster Audigy Value (24-bit) card and am trying to install it on my system. The card does get installed but the sound comes in only one speaker, the other one remains as dead as a wooden log. I checked the speakers on my laptop and they work just fine.
Currently I have a two-speaker set so is that an issue?
I've tried installing the driver from the CD that came with the device and also using Windows Update, the result is the same, sound comes only from one speaker.
Is the installation so complex for everyone or is it just me?

I think you're best choice is to work within your school's
administration to resolve 'why' it's blocked. That's the right
thing.

Audigy Value and Digital Out probl

I read the faq.
I have the Audigy Value card with the digital I/O mini-jack. I tried using a standard optical cable with an adapter mini-jack "cap" to pop on one end to plug into the sound card, and the other end into my digital in on my stereo. I still can't get any sound, is there some setting I am missing.
I pop in my Hercules sound card that has a normal type optical out and everything works fine without me messing with it, so I know it isn't the stereo input.

Fuzzylogic,
These articles should help explain what is going on:
http://us.creative.com/support/kb/ar...p?l=2&sid=5764
http://us.creative.com/support/kb/ar...p?l=2&sid=4858
Jeremy

Audigy4 or Audigy Value for 2.1 se

Hello all,
I dont know much about sound cards.
Basicly, im using my pc as a home media pc to watch dvds and listen to music in the living room.
I have z-2300 logitech 2. speakers and im after replacing the onboard sound to either one of these cards.
I just want to know is it worth paying twice as much for the audigy4 over the audigy value for these 2. speakers. Will there be any difference between the 2 cards for my setup??thanks in advance-Brendan

2. speaker setups use only one connection, so you would connect via the front LR output (should be the green colored one). Only with surround setups (such as 5.) does teh sub (LFE) get it's own channel.

Help with Sound Blaster Audigy Value 24-bit..keeps crashing when connecting to the inter

pls help..every time i connect to the internet while playing mp3's or just any applications or programs that produces sound and even when streaming some clips through the internet, my computer restarts..any sound that is produced when i am online it will restart..but if i just surf the net without playing anything..it works fine...
how cn i solve this problem..
pls help..thnx
my spec:
AMD Sempron 2400+
Epox 8rda3i
Seagate 80gb
Palit GeForce 6600gt
Creative Sound Blaster Audigy Value 24-bit

screwguy_28 wrote:
is this the one?
IRQ 0 System timer OK
IRQ Standard 0/02-Key or Microsoft Natural PS/2 Keyboard OK
IRQ 3 Communications Port (COM2) OK
IRQ 4 Communications Port (COM) OK
IRQ 5 Uni'versal Serial Bus (USB) Controller OK
IRQ 6 Standard floppy disk controller OK
IRQ 8 System CMOS/real time clock OK
IRQ 9 Microsoft ACPI-Compliant System OK
IRQ 9 SCSI/RAID Host Controller OK
IRQ 0 MPU-40 Compatible MIDI Device OK
IRQ NVIDIA nForce PCI System Management OK
IRQ 2 PS/2 Compatible Mouse OK
IRQ 3 Numeric data processor OK
IRQ 4 Primary IDE Channel OK
IRQ 6 Sound Blaster Audigy OK
IRQ 8 SoftV92 Data Fax Modem OK
IRQ 9 NVIDIA GeForce 6600 GT OK
IRQ 2 Standard OpenHCD USB Host Controller OK
IRQ 22 Standard OpenHCD USB Host Controller OK
Everything seems to be OK so it's propably the drivers for your modem that is causing the issue. Just try if updating them helps anything.
Also, you can turn the MPU-40 (onboard MIDI/Game port) if you dont need it.
jutapa

Saound blaster audigy value windows vista 32 bit problem in driver compatibility!!!

i have installed the sb audigy value latest drivers july 9 2007?and it installed clean and then after a few restart it will detect again the standard?pci to pci bridge and sound devices... when i am using?xp this does not happenwhat is wrong with your drivers? i am installing the?drivers?again and again and same thing happen and my settings reverting always to 6 bit 48khz my card is 24 bit 96khz in the first install... and after a few restart?the setting for 24 bit and 96khz?will dissapear and the only available is 6 bit 48khz somtimes not working? kindly help me... plz... all my problem in windows vista 32 bit has been resolve this is the only one remaining...

Graphic drivers for the iMac is a regular question, and there are some tips and answers. I'd have skipped Vista, too much like beta and gone for 7, but you have it now....
Check the end of this thread with tips:
http://discussions.apple.com/thread.jspa?threadID=1866970&tstart=0&messageID=112 87449#11287449
And take a look for other similar threads.

Severe Jitter/Glitches with Audigy Value/SE in Windows 7 64bit

Hello all,
Im experiencing a severe sound jitter and random "clicks" in windows 7 when playing music and using the computer for browsing.
I didnt notice this problem before because i used to keep my computer idle while doing other stuff when playing music.
the sound plays as if it "slows down" or something when doing random activities on the computer
My setup is
Intel Core 2 Duo E6550
4GB DDR2 800 MHZ
Creative Sound Blaster Audigy Value/SE
Windows 7 64BIT
Gefore 8880GT
I use winamp for playback.
Im using the latest drivers from the creative site.
Is there anything I can do?
The sound so

Thanks for the reply jmacguire.
I'm using default values: 6 bit, 48000 hz (DVD Quality)
Which one do you recommend with the SB Audigy SE?
The sound distorts when listening music in youtube or other flash webpages, both in normal and in HQ settings.
I have tried almost everything. I think the drivers downoladed for Windows 7 works better.
Then the Autoupdate function downloaded some new drivers (version .0090 I think) and it screwed up the sound on the web.

SB Audigy Value card Conflict with Modem re-booting my

My PC using Intel D95GAV M/B, 3.2GHz with XpSP2. On-board sound ok. Recently installed SB Audigy Value card. It is working perfectly. But with that card I can't use any modem function, any time if I dial or connecting to Internet or Outlook my PC gets re-boots. I already disabled on-board audio. different PCI slot tried. Then I replaced the Audigy card. Replaced the Modem. Audigy Value card tried with another 3 PCs. all are facing the same problem.
Please Help me!
4S7MD

Unfortunately if you read the release notes for the Vista compatible driver it tells you not to use it on your particular sound card ;(?http://us.creative.com/support/downl...rtype=&x=2&y=7?Notes:
DO NOT?install this driver for Sound Blaster Li've! 24-bit, Sound Blaster Audigy LS, Sound Blaster Audigy SE, or Sound Blaster Audigy Value.<However when you tell the site you have an Audigy Value card it directs you to these incompatible drivers
go go Creative

Windows 7 can use Graphic Equalizer? (Audigy Value)

Hi, i'm new user?
now i use sound blaster audigy value but driver in cd driver not support windows 7 (Bluescreen)
and i want to use graphic equalizer, please help me?
Message Edited by materialise on 03-28-2009 05:03 [email protected]

Maybe you have installed all this stuff in wrong installations order. I have installed Win7 32 bit on friends Satellite A500 following this installations order:
-Win7
-chipset driver
-storage manager
-display driver
-sound driver
-modem driver
-supervisor utility
-infrared
-patches
-configfree
-VAP
-toshiba hardware setup
-HDMI control
-WLAN driver
Added Vista stuff:
-Toshiba assist - work properly
-Card reader - installed properly
-Webcam driver for A500 - tested with Skype - works properly.
-Synaptics driver
Everything works perfectly including hardware setup. I don't know maybe you should install Win7 again following this installations order.
By the way: hardware setup was shown in control panel in WXP but since Vista not anymore. So I asked you this question because I know for sure it is not in control panel anymore.
Since Vista Toshiba packed all tools and utilities overview in Toshiba Assist.

Help on Audigy value soundc

Hi,
I just bought the Audigy value soundcard, but when I installed it using the drivers provided in the CD. My windows volume control is displaying chinese characters instead of english, also the creative surround mixer display ? instead of the proper words(guess it cannot decode the chinese wordings). Anybody knows how to fix this problem? thanks?[IMG"]http://i29.tinypic.com/2vbrbec.jpg[/IMG]?[IMG"]http://i28.tinypic.com/6ep7cp.jpg[/IMG]

int i = Integer.parseInt(x);
Will convert the String to an integer.The original poster was looking for a way to convert a single digit in a string to its numeric value, not to convert the whole string to an integer.
I forgot to mention that this is contained in the
java.text package, so you will need to
import java.text.*;Integer is in the java.lang package, so no import is necessary.

XBOX, Optical-in, Audigy 2 Value, 5.1 Speak

Similar Messages

Maybe you are looking for