Xbox360 Internet sharing

Hello
I got my macbook earlier a couple of months ago.
I had read online that you could share the ethernet port and the internet connection as a result. The way i would do this is by going into netinfo manager and getting the ip,dns, router, ect and would put that in the manual xbox network settings.
It worked with out a hitch.
I recently bought leopard and decided to do a clean install.
I thought that the internet sharing would work the same as in tiger (keeping the same numbers in the network settings on the xbox), but no luck. I tried to look for netinfo, but it seems that apple removed this utility : (.
Has anyone gotten it to work.
I'm too cheap to get the xbox wireless adaptor.
thanks

Tried plugging direct to Xbox/Mac. No go. Any help? Please!

Similar Messages

Internet Sharing (Xbox360,MacBookPro,Clearwire)

Howdy Folks.
Bit of a funky network question;
My goal is to get my xbox360 to share internet via internet my MacbookPro with ClearWire 4G USB connector.
I turned on internet sharing from system preferences>sharing. From "4g Wimax" to "Ethernet". I plugged an ethernet cable from macbook to the "internet" port on my router, and then ran a ethernet cable to the xbox, the xbox detects the network, but not the internet.
I'm pretty tech savvy but not a network wiz.
I reset the modem, but left it on default settings.
Do I need custom DNS or IP addresses on the router?
Is there something else I need to set up on my Mac?
Would it be easier to bypass the router and just plug cable direct to Xbox?
Thanks folks!

Tried plugging direct to Xbox/Mac. No go. Any help? Please!

OSX 10.6.8 and Internet Sharing to Ethernet

I am trying to set up Internet Sharing so that I can connect my old MacBook Pro running 10.6.8 via ethernet to another device - I'm trying with xbox360 and Sony Blu Ray (BPD-S185) (for diversity of devices - I used to have it working on my xbox, but really want it working with the blu ray player but the network status feedback is better for problem solving on the xbox!).
I have my MBP connected to my home network over Airport which has the following details:
- IP: 192.168.1.5
- Router IP: 192.168.1.1
I have then enabled Internet Sharing through System Preferences to share my Airport connection to my Ethernet connection.
I have the following Ethernet settings:
- Configure IPv4: Using DHCP with manual address
- (Ethernet) IP address: 192.168.2.1
- Subnet Mask: (blank - not user accessable, changes to 255.255.255.0 when xbox turned on)
- Router: (blank - not user accessable)
- DNS Server: 192.168.1.1
- Search Domains: (left blank)
On the xbox I've set the network settings to:
- IP: 192.168.2.2
- Subnet: 255.255.255.0
- Gateway: 192.168.2.1
- Primary DNS: 192.168.1.1
- Secondary DNS: 192.168.2.1
When I then select 'Test my Xbox Live Connection' it takes a while, the Network status shows 'Connected', however The Internet Failed. I am informed that the 'Test Failed' and 'more information' tells me I have an 'Internet Error' with the following Status codes:
W: 0000-000B
X: 0000-000D
Y: 0000-0000
Z: 0000-0000
ID0004-000
L: 0015-10F1
Q: 8007-0435
T: Wired
A: 192.168.2.2/255.255.255.0
G: 192.168.2.1
D: 192.168.1.1/192.168.2.1
So, it looks as though the problem lies with the MBP and internet sharing on OSX. I have extra suspicions that this is the problem, as connecting my Blu Ray player to my MBP via ethernet I also get a successful connection to the network, but no internet access.
Pleeeeease can someone help?!?! This is driving me nuts - a couple of years ago I had internet sharing working to let my xbox connect to the internet, so what's happened in the last few years to mean this won't work?

If you want to back it up there, use the Disk Utility to create a disk image of it.
If you want to import its contents to iMovie, iTunes, or elsewhere, use MPEG Streamclip and Apple's MPEG-2 playback component to convert the VOB files on it to a different format.
(65437)

Port forwarding through Internet Sharing

Here's my setup:
- I have a Linksys router, I have that connected wirelessly to my macbook, I have that setup for Ethernet internet sharing to my desktop pc.
- I want to enable port forwarding so that I can access my PC through VNC.
- My macbooks ip address is within 192.168.1.x and my desktop's IP address from the macbook is within 192.168.2.x
- When I connect to my router and try to set up port forwarding I can only forward ports within the 192.168.1.x range.
- I've tried a bunch of garbage to get it set up, one main thing I've tried was to st my PC's ip address statically to something withing 192.168.1.x, but my default gateway address is 192.168.2.1 so I'm not even sure if thats possible.
- I really need some help with this, any would be very much appreciated.

Hi guys. My setup is pretty simple. I have a Terayon cable modem hooked to an iMac. Im doing internet sharing to everybody. I don't need an access point and don't wish to have to buy a new one when I have such a beautiful machine right.
So I want to do port forwarding using the internet share to connect an XBox360.
The ports i want to configure are detailed in www.portforward.com
Anyway I can't see how to do it but I know that for you guys this is all puppy chow. So i decided to give you guys the opportunity to be creative with this setup.

Open DNS and internet sharing

I am seeing strange behavior, and wondering if anyone has a thought about what is going on.
I am at a hotel with fast internet service over ethernet, but, for whatever reason, DNS seems very slow if I use DHCP to connect (timeouts of 5-10 secs to get to a new site). If I switch to DHCP with fixed DNS, and use the Open DNS servers (208.67.222.222, 208.67.220.220) the latency issues go away.
The interesting thing is that I am sharing the internet connection over Airport to my wife's computer (she connecting thru DHCP). If I use a fixed DNS for MY computer, then her computer cannot connect thru internet sharing. But if I use the (slow) DHCP connection, then she can connect through mine. I have not tried setting up her computer with a fixed DNS, as she really doesn't like me to change settings on her computer
Is this a known limitation of internet sharing, or is there something I should know?
TIA

In more detail, if my ethernet (the computer that is doing the sharing), is set up with Configure: Using DHCP, and DNS Server: 208.67.222.222, 208.67.220.220 (in Network Panel for Ethernet), then the computer connecting thru Internet Sharing in Sharing Panel is not able to access some or all resources thru http (ie, pages fail to load, or do not fully load).
However, if I clear the DNS Server part in the Network Panel, thereby using the the DNS Servers supplied by the hotel, then my computer's connection to the internet is slower, with long waits (presumably due to a slow DNS server), but computers accessing the internet via Airport thru my shared connection are able to browse the internet successfully.
I suspect that when I have a fixed DNS server in my computer, that fact is not broadcast to computers using the shared connection. But I am not an expert in TCP/IP, and may well be confused about how DHCP, DNS, and Apple's Internet Sharing work together.
Thanks for any ideas you have
A

Can't create airport/wifi internet-sharing network with other laptop

I have an iBook running Tiger 10.4.11 connected to the net with ethernet. The internet connection comes through a radio antenna which acts like a router to which I don't have access.
I want to share my internet connection, and to be able to transfer files, between the iBook and another laptop. I've tried it with two - one running Fedora 11 (mine) and one running Windows XP, and have the same problems with both.
I turn wifi on on the ibook and linux laptop. I turn on internet sharing from built-in ethernet to airport in System Preferences. First I try it with no encryption. 'Other settings may interfere with internet sharing' shows up; it tells me to enable Personal Web Sharing, which I do. When I click start Little Snitch tells me natd wants to connect to 10.0.2.1 (presumably the router in the antenna), which I allow. I try to connect with the linux laptop and it tries then disconnects.
1) isn't personal web sharing for serving web pages? — why is it necessary here at all?
2) what am I doing wrong in making my network work?
If I enable encryption using WEP, the other password asks me for authenticication, I put in the password, and it then tells me the network has been disconnected.
3) is WEP the best encryption I can use from Tiger?
4) I think the problem's with Tiger (both laptops can connect to other wifi networks not set up by me). Is there a piece of free software I can use to share the connection instead of the built-in one?
I can't make a functional network in reverse either (i.e. setting it up on the other laptop and trying to connect wirelessly with the ibook).
What I am trying to do is precisely this (http://my.safaribooksonline.com/0596009135/runmacx2-CHP-11-SECT-13) — it just doesn't work.

When I click start Little Snitch tells me natd wants to connect to 10.0.2.1 (presumably the router in the antenna), which I allow. I try to connect with the linux laptop and it tries then disconnects.
Back on that part, at that Point the Mac is a NATD Router, don't try to connect to the other computers.
On the Mac, with Internet Sharing enabled, open NetInfo Manager in Applications>Utilities.
From there on out, it's a bit foggy, but iirc Config>DHCP>Subnets><the subnet>, then down where it says com.apple.nat... what does it report for IPs?
If it were say 10.43.29.1 then the others trying to join should have that as a Router/Gateway, and then 10.43.29.2, 10.43.29.3, etc. as IPs.
Apple says you can't set it Manually, but I've had it work a couple of times.

Remote App and Internet Sharing Problem

Ok so basically heres the setup we have, we have one of the recent iMacs, a Macbook, and 3 PC's, one running XP and the other 2 Vista. All of these computers are on a network together. All our music is on one of the Vista PC's, called "SERVER". This PC is connected to the speaker system, so is what we use for music.
Now I've been trying to use an iPod Touch we have (most recent firmware 2.2, and most recent Remote app version.) and the remote app to control the itunes on this PC. This is not an issue when the iPod is connected to the Wifi the router itself provides (its one of those wireless routers), but when I switch the Wifi the iPod is using to the Wifi provided by the iMac using internet sharing, it suddenly can't find the library anymore. Internet (safari) still works fine from the ipod when connected to this Wifi point.
My guess is that because the iMac using internet sharing seems to act more like a router than a wireless access point (allocating its own IP adresses ect..), the iPod thinks its on a different wireless network, and thus cant see the itunes library. Obviously the iMac is connected to the router directly by ethernet, if I hadnt mentioned that.
So, my question is, can I fix this ?
Is there any way to make the internet sharing mac behave like a wireless access point and not like a router ?
Help would be much appreciated.
Thankyou.

asuming you mean internet sharing as in you connect adhoc to 1 computer using wifi and the rest of the network is wired
problems is the middle name of adhoc wifi though cause everybody problems imho
and wifi routers are soo cheap most people don't bother
even if internet sharing is used remote app should still work if not connecting adhoc at least it's working for me right now
with a setup of many computers 1 wifi router
1 computer sharing internet using an usb 3g modem
remote app works with all my computers and my appletv

Touble with Internet Sharing since latest Aiport Update

Up to yesterday I was able to share seamlessly my internet connection on my iMac using built in airport as a router. Since the last update, every time I open internet sharing is running on my iMac while connected to the internet, sharing my connection from ethernet using Airport within 30 second of my iPod been connected to my Wireless signal my internet connection die, and can no longer access the internet with my iMac or iPod. The only way to get back my internet connection is to disable internet sharing in system preference.
AirPort Card Information:
Wireless Card Type: AirPort Extreme (0x14E4, 0x87)
Wireless Card Locale: Worldwide
Wireless Card Firmware Version: Broadcom BCM43xx 1.0 (5.10.38.27)
Current Wireless Network: Airport
Wireless Channel: 11
Help

Just to be clear,
1. You are connecting fine on your iPhone (meaning that you have the 3 bars next to your Carrier in the top left of the screen)
2. you can't access the internet on you iPhone
Correct?

Can I use internet sharing to give internet to my Apple TV through my Macbook and use Airplay on the same computer at the same time?

So I am using internet sharing from my Macbook to my Apple TV. The router providing internet to my Macbook has an ip address that looks like 192.168.0.x. Since the internet sharing feature assigns an ip address that looks like 192.168.2.x to my Apple TV, the Macbook is unable to see the Apple TV ("different" networks). Is there a way around this so I can share internet and still be able to use Airplay between the two?
BTW I am using a Macbook Pro Retina 15'' (late 2013) on Mavericks 10.9.1 and Apple TV 3.
Thanks.

Why are you tyring to spilt your connection though the MBP? Why don't you just connect them both to the router as they are meant to be setup?

Error message about firewall and internet sharing

hello all i have a question regarding the use of firewall and internet sharing.
I have a PMG5 connected to internet through Airport. I've linked an Xbox 360 via the built-in ethernet port in order to access Xbox Live. I had to open specific UDP ports on the OS X firewall but it now works fine. However, in the Sharing Preference Pane, Internet Tab, i still get an error message saying that my Internet Sharing is disturbed by the settings of the firewall and sharing services, it says that i did not activate "personal web sharing" in the first two tabs...but i DID ! And there's no way to get rid of this error message.
I know I know some may consider it's not a real problem because it's just an error message while the connection actually works fine but well, I tend to hate error messages when they're not supposed to show up. So if anyone know the answer, thanks in advance...
Good day to everyone
Vince, Paris...

sorry about the delay in replying, was kinda busy
well trashing the pref files was useless and i tried with another user, same thing. As for the second opinion, the problem was not about which port was used cause as i said the connection sharing works fine and anyway it was the correct port that was checked, it's just that i get an error message while there is no apparent error and everything works fine, i'm told that personal web sharing is not enabled but it is...
Anyway as i said, it's probably not a real matter, as long as it works...which brings me to another thing. I've created a special protocol in the firewall to enable a proper dialog with the xbox. it's basically the same thing you do for ichat AV when you have video connection problems, you track down the concerned UDP port using terminal, you allow traffic and all... The protocol for the xbox worked great for some days, but now it seems it's not enough, the game set keeps trying on another port and i constantly have to update the protocol or deactivate the firewall...and enabling back all UDP traffic is not enough to solve it.
In a way i think everything is linked, the initial error message when everything was fine and the current trouble. Any idea?
thanks
Vince

AT&T microcell and internet sharing

I have an Airport Extreme connected to my cable modem, with an iMac 10.6 connected though the Airport. I just got an AT&T microcell which normally connects to the Airport ethernet port giving me better iPhone calling. I want to instead connect the microcell to the iMac ethernet with internet sharing enabled, through this ethernet port. The microcell doesn't like this, ethernet connection light just blinks and the network cp ethernet port says Self-Assigned IP. Can I make this configuration work somehow?

It won't work that way. The Microcell needs a wired connection all the way back to the router.

Airport Roaming Network and Internet Sharing

Dear Esteemed Experts (Tesserax et. al):
Thanks to you, I have successfully set up TC and 2 Airport Express N in a roaming network (plugged to Ethernet but using the same name and protocol) using 802.11n (b/g compatible) radio mode. It's working well, except a few blind spots to cover.
If I want to add an old b/g-only Airport Express or Netgear Access Point (WG602) to this roaming network (plugging them into Ethernet outlet), will this slow down the N network?
Also, can I turn on Internet Sharing on my iMac (with N capability) and make it to join the Roaming Netowrk? If so, can I manage it through Airport Utility?
Thanks
Aghoo

If I want to add an old b/g-only Airport Express or Netgear Access Point (WG602) to this roaming network (plugging them into Ethernet outlet), will this slow down the N network?
If it is connected via Ethernet it will have no direct affect on the performance of the 802.11n network.
lso, can I turn on Internet Sharing on my iMac (with N capability) and make it to join the Roaming Netowrk?
Internet sharing has nothing to do with joining a wireless network. If you want your iMac to join the wireless network, just go to the AirPort menu and select the network that you want to join.
If so, can I manage it through Airport Utility?
AirPort Utility is only for managing Apple's base stations.

Airport Express, Leopard and Internet Sharing

I have my internet connection running directly to my iMac's ethernet connection and I use the Internet Sharing option to share my connection with computers. I had been using my Airport Express just to connect to my iMac for Airtunes. My Airport Express has stopped working and is not located unless I shut off Internet Sharing, but if I turn that off, it will not let me set the Airport Express to connect to an existing network - I guess because the network does not exist because I shut it off to configure the Airport Express. This is driving me crazy - any thoughts?

Interestingly, it works again. To initially configure the Airport Express, I had to shut off internet sharing. I configured the Airport Express (I did a hard reset to clear everything out) using the Airport Utility and set it to join an existing network. Of course my network did not show up since I had shut internet sharing off, but I manually typed in the name and password that I had already set for the internet sharing. I also put in a name and password for the base station, but this isn't required.
Then I hit update and right when it says that the configuration has been changed and it is waiting for the Airport Express to restart, I turned internet sharing back on. I waited and after flashing yellow for a while it connected. I unplugged it and plugged it back in to make sure it was fully configured and it works. I have found in the past the unplugging and plugging back in solves a lot of problems too.
Now that it is all set up, I can see and reconfigure the Airport Express in the Airport Utility even when internet sharing is on.
Hope this helps.

Computer - computer network and internet sharing

I apologise if this has been discussed elsewhere - please point me to any useful links.
I have a G4 iMac and iBook (running 10.4.6) both with airport extreme cards installed. I would like to use a computer to computer connection for file / printer sharign and most importantly to share the ethernet connection to the internet running through my iMac.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
Having accomplished this, I then need to be able to create a similar connection when required so that when required I can share the internet connection from the iMac with our PC laptop running Windows XP service pack 2.
So, the simpler the better, instructions for creating a computer - computer network for internet and file sharing between two Macs and following that between the Mac with the internet connection and a Windows laptop.
Thank you very much in advance.
G4 iMac USB 2.0 / G4 iBook Mac OS X (10.4.6)

You don't need to setup up computer to computer connection if your using internet sharing. Once you start internet sharing then your 2 computers are connected togther.
I would be extremely grateful if someone could point out how to do this and incorporate a practicable level of security (I don't want any of the hundreds of people in adjacent flats downloading lord knows what through my connection).
The problem you have is that if you enable internet sharing on one of your macs to share its connection over airport then the only level of security you can enable is WEP encryption.
The problem with WEP encryption is that it offers no real security and can easily be cracked. WPA is the only security you should consider using and unfortunately OSX does not have WPA encryption functionality when using the built in internet sharing function.
Your best solution is to get a wireless router that has a SPI firewall an WPA encryption. Depending on what your current internet connection is and how it is provided would determine the best kind of router to get.

Lumia 710 signal and Internet sharing problem

I've been using Lumia 710 since 3 months. Even though the initial experience was good now I'm facing a serious signal problem with the phone. We recently moved to a high-rise building where the signal is weak inside the rooms. If the phone looses the signal it doesn't pick-up the signal even though network is available. This is causing a serious a trouble to me as I don't receive or make calls during the period. I either need to switch-off and switch-on again or I need to turn-on and turn-off flight mode for the phone to pick up the signal. Sometime even though the signal shows 3/4 bars I won't be able to make/receive the calls.
I'm also facing a issue with Internet sharing option. Even though devices are able to connect they are not able to use the internet/data from phone. I was using the same SIM with other phone of different make and it was working pretty fine. I rely a lot on internet sharing option and now I can't even swap my SIM with old phone as Lumia uses micro SIM.
Please let me know the solutions to both these issues.

That is not normal though. Bring your phone to your local Nokia Care Center and let them have a look at it.
Internet Sharing on Edge/G is not working very well, try and find a 3G connection (which is fast enough) and you will get a better experience.
Microsoft Windows Phone MVP
Follow me on Twitter: @ThisIsMetro
Press the 'Accept As Solution' icon if I have solved your problem, click on the Star Icon below if my advice has helped you!

Xbox360 Internet sharing

Similar Messages

Maybe you are looking for