XCelsius 08 Engage Version - Stuck at Initializing when click preview

I am using the XCelsius 08 Engage Version. I have some graphs on workspace and some excel formulas on spreedsheet. When i click preview button, the application just show the Initializing bar and stuck there.  please help

I would log a ticket with SAP abou the issue.  We have had similar issues with our setup and responses in view ing the SWF.  If fact I have a ticket with SAP regarding code errors taht comeback during the SWF creation.  But we are using Win7 and MSOS2008, which is NOT supported by SAP; And pretty much is diffecult toexplain to customers. The only version that I have seen work with BPC is Xcelcius SP2. But that isn't available on the SAP download site.
Therefore, log a ticket...and let us know what they state is the issue, so we may all have use of the great Xcelcius tool.
Thanks.

Similar Messages

  • Hp 3550 stuck on initializing

    hi please help me my hp 3550 is stuck
    it goes throught ram check and then gets stuck on initializing
    when you first turn the printer on their is a click from the right hand side so i took the pannel off and had a look and it seems like the motor that engages the cartridges doesnt engage it just clicks
    i have read alot of posts saying network card but this one is usb only
    also tried new cartridges and taken everything out i.e all carts trans belt and fuser still no go
    please someone help me

    Hi @rfcousins ,
    I see that you are having issues with the printer stuck initializing. You are unable to manually move the toner to see if that would work. I would like to help you out today.
    Power cycle the printer. Make sure the printer is connected directly to a wall outlet. (don't use a power hub or a surge protector) This ensures the printer is receiving full power and may help this situation.
    You can manually move the carousel.
    Open the scanner lid and the lid below that so you should see the toners.
    On the left hand side of the black frame, you will see a oval hole with a white plastic piece inside it.
    You will need to use something to push down on the white plastic piece, at the same time push the carousel backwards, (just above the toner, by pushing on the the frame)don't touch the toner though. It has to be in the exact right position in order to be able to pull the toner out.
    I included a picture with the general area, where to use the manual feature on the printer.
    If you need further assistance, just let me know.
    Have a nice day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • When i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

    Adobe cloud setup downloaded off the internet just fine but when i open it gets stuck at "initializing installer" and the green bar doesnt move. How do i fix this so it installs?

    Multiredwolf123 have you utilized the steps listed in Error "Failed to Install" Creative Cloud Desktop application - http://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html to resolve the current error?

  • ITunes installation always get stuck on "Initializing QuickTime types"

    Whenever i try to install iTunes and QuickTime it always get stuck on "Initializing QuickTime types."
    I am not able to update my software!
    Please Help!

    Me Too!!
    I have XP SP3. Intel pentium 4 2.6Ghz. 4Gb RAM. 116GB open on one HDD, 72GB open on the other.
    I'm on Admin access level.
    I'm trying to install iTunes 7.7 bundled with Quicktime 7.5.
    I emptied my temp folders.
    I shut down my antivirus and anti-spyware.
    I shut down all non-essential startup menu items.
    My folder names dont have unusual characters.
    I have uninstalled all versions of Quicktime and iTunes and iPod updaters from my machine.
    Still no luck.
    When Installing the Quicktime application, the entire machine locks up when it gets to the "Initializing Quicktime types" segment of the install.
    I have left the machine on its own for up to 14 hrs and it never does regain normal function.
    The only way to regain control is to reset or hard shutdown.
    Can someone please respond to this so my daughter can use her 2 month old graduation present?
    Thank you so very much.
    PS:
    How about standalone downloads for each application?
    And, how about patches so the download doesnt take so long and the installation doesn't need to be so intrusive?
    Message was edited by: Jeteye97

  • After effects is stuck on initializing media core

    Well the title says it all. When ever i try to start up After Effects it just gets stuck on initializing media core. I looked on one of you're posts where it said enable a few of adobe products to be allowed on the firewall and i did but it still wont open it. Please respond asap.

    Considering the wealth of information you've supplied about your system, the versions of software you're running and any ancillary cards you have have installed, here's my best guess given the facts at hand:  AE doesn't like you any more.  What did you do to make it so angry with you?
    First, you should apologize to AE.
    Then you should UNINSTALL Quicktime X and install the latest version of QT7.

  • Engaged Version: "+" sign not working for label

    Post Author: Kel2008
    CA Forum: Xcelsius and Live Office
    I found a problem that most of my old files in Professional Version is no longer working in the Engaged Version. 
    Whenever there is a cell using the  "+" sign to refer to another label, the system returns zero instead of the correct label.
              For example, cell A1="Name", cell B1=+A1 and it should display "Name".
              In Professional Version, a Display Grid of cell B1 displays "Name" correctly.
              But in the Engaged Version, a Display Grid of cell B1 returns "0" instead.          p.s. Though the Excel View frame is still showning "Name", it is no longer WYSIWYG.
    I'm using the function =Concatenate(A1) to get around the problem.  But it is frustrated to change so many "+" sign of the file into '=concatenate()'. 

    Post Author: Kel2008
    CA Forum: Xcelsius and Live Office
    Thanks Andy, It works fine with =A1.
    About the reason why people use =A1 : All the new and old Excel version support the using of "" sign to refer to both number or lablels.  The only exception is that you have to use "&" instead of "+" when you are going to concatenate two or more labels together.
    Many users used to type +A1 instead of =A1, perhaps this is an old habit dated backed to the first version of Excel (old folks joke). 
    The +A1 works fine in the old Professional Version.  Even in the Engaged version, it is still able to show the label for +A1 in the Excel Frame, but not in the actual run.  Such non-WYSIWYG confuses the users.
    Other consideration:I'm not sure that someone would like to return zero on label of a +A1 formula. 

  • Xcelsius 2008 Engage Won't Install in Windows 7

    The installation of Xcelsius 2008 Engage completes but the program cannot be used at all because the license key is stated to be missing or invalid.
    This is a common problem on other systems but it can be worked around in various ways. However the workarounds fail in Windows 7.
    The required registry entries that need to be edited are not present in Windows 7. Running as administrator does not solve the problem either.
    It seems Xcelsius 2008 can only be used on Windows 7 by running under an XP virtual machine.
    Does anyone have a way to get Xcelsius running natively on Windows 7?
    My Windows 7 system is the 64-bit release candidate. Xcelsius 4.5 runs on this but only when run as administrator and in XP SP3 compatibility mode with desktop composition and visual themes disabled.

    Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.
    If you still have problems, please post the contents of the FlashInstall.log file in
    C:\Windows\system32\Macromed\Flash
    C:\Windows\syswow64\Macromed\Flash
    [topic moved to Flash Player forum]

  • All navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included Wikipidia, news(with sub-options LA times, NY times,BBC etc), YouTube, mail & others. how do i recover previous version?

    all navigational subheadings near top of screen in previous version of ff disappeared when installed ff4. they included wikipedia, news(with sub-options LA times, NY times, BBC etc),YouTube, mail & others. how do i recover previous version?

    You are welcome. I'm glad you got it back up.
    (1) You say you did the symbolic link. I will assume this is set correctly; it's very important that it is.
    (2) I don't know what you mean by "Been feeding the [email protected] for several weeks now, 700 emails each day at least." After the initial training period, SpamAssassin doesn't learn from mail it has already processed correctly. At this point, you only need to teach SpamAssassin when it is wrong. [email protected] should only be getting spam that is being passed as clean. Likewise, [email protected] should only be getting legitimate mail that is being flagged as junk. You are redirecting mail to both [email protected] and [email protected] ... right? SpamAssassin needs both.
    (3) Next, as I said before, you need to implement those "Frontline spam defense for Mac OS X Server." Once you have that done and issue "postfix reload" you can look at your SMTP log in Server Admin and watch as Postfix blocks one piece of junk mail after another. It's kind of cool.
    (4) Add some SARE rules:
    Visit http://www.rulesemporium.com/rules.htm and download the following rules:
    70sareadult.cf
    70saregenlsubj0.cf
    70sareheader0.cf
    70sarehtml0.cf
    70sareobfu0.cf
    70sareoem.cf
    70sarespoof.cf
    70sarestocks.cf
    70sareunsub.cf
    72sare_redirectpost
    Visit http://www.rulesemporium.com/other-rules.htm and download the following rules:
    backhair.cf
    bogus-virus-warnings.cf
    chickenpox.cf
    weeds.cf
    Copy these rules to /etc/mail/spamassassin/
    Then stop and restart mail services.
    There are other things you can do, and you'll find differing opinions about such things. In general, I think implementing the "Frontline spam defense for Mac OS X Server" and adding the SARE rules will help a lot. Good luck!

  • 11gR2 Recon Insert Received stuck in Pending when adding a task on response

    Reconciliation Insert Received stuck in Pending when generating a task on "Event Processed" response
    When configuring a task to be generated on a "Event Processed" response for the Reconciliation Insert Received task the Reconciliation Insert Received task gets stuck in a Pending status. The Resource Object instance is created for the user but the task to be triggered on Event Processed response is never added to the process. I have tried this with multiple resource objects / process definitions. If a task is not configured to be triggered on the Event Processed response then the Reconciliation Insert Received task completes as expected. There are no exceptions in the logs when this occurs. I can see that the Reconciliation Insert Received task response is set to "Event Processed" but it's in a pending status. I've tried configuring the task to be added as a task with a simple copy adapter or even one that simply auto completes. If this task is added manually it completes as expected. Can anyone provide any input as to why my task is not being triggered and the Recon Insert Received task is getting stuck in a Pending status? I have performed the same configuration in previous OIM versions several times with no problems. Also, I don't see any exceptions in the logs during the time the reconciliation is happening either.
    Thanks!
    Edited by: user651154 on Dec 5, 2012 9:03 AM

    FYI - Oracle Support has confirmed that this is a bug with no resolution yet. Bug # is 15971696.

  • After effects cs6 gets stuck on initializing mediacore after is been used.please help

    Everytime I use after effects cs6 and then want to open it again it gets stuck on initializing mediacore. I then have to restart windows or my computer to make it work again. Please hel. Thanks

    We need to know a lot more to help you. Please provide answers to the questions listed here: "FAQ: What information should I provide when asking a question on this forum?"

  • It is stuck on Initializing Installer???

    I am on PC and when I double click the icon to install I the green bar moves a little but stops after about 20 seconds and it is stuck on initializing installer. Tried restarting and re downloading nothing helped.

    Hi Poke,
    Please refer to the help document below to fix the error:
    Error: "Installer failed to initialize" | Windows
    You may also refer to the threads below where this issue has been addressed:
    Creative Cloud Installer not Initializing AGAIN.
    Installation - stuck on initializing
    Re: App Installer Freezes at "Initializing Installer"
    Regards,
    Sheena

  • Printer stuck on "initializing"

    I purchased the printer in February 2015 (less than 6 months ago) and connected to my network wirelessly (plugged in via surge protector that was brand new).  Every thing was great until a week ago.  The printer power went off and when it came on, it stayed on the initializing screen.  I let it go for 48 hours, no change.  I unplugged for an hour and replugged it in, no change.  I unplugged for 3 days and tried again, no luck.   I came to the forums and tried the steps recommended in another post: Attempted a hard reset (unplug while still on and wait 60 seconds, reconnect to wall outlet) - nope Attempted power drain (unplug while keeping power button pressed for 30 seconds) - nope Attempted to update software via HP Support Assistant on my computer, all updates current and no change I even went as far as uninstalling the printer and software from my computer and attempting to reconnect via USB connection - that solution was problematic as the printer never made it to ready mode to install software. Attempted to intall for wireless network but I can't get to the wireless menu on the printer due to it being stuck on initializing. Please help, I am becoming more frustrated by the day and can't go much longer without the printer.  I invested more money to ensure that I would have a quality, reliable printer.  Cheaper printers did not fizz out on me this quickly! 

    Hi , I see by your post that the printer is stuck initializing. I would like to help you.
    I will send you another step to try in a private message.
    In the forum beside your handle name just click on the envelope to view it. If the issue continues, please Contact HP Support for further assistance. Fill in the model number and the form to receive a case number for quicker assistance. If you appreciate my efforts, please click the 'Thumbs up' button below. Thank You.

  • CAPTURE stuck on INITIALIZING

    I've removed an existing streams configuration. It appeared to be successful.
    However, now that I attempt to define a new configuration, I encountered the following problem:
    Capture process status seem to be stuck on INITIALIZING, sometimes moving to DICTIONARY INITIALIZATION and back.
    I've read that this could be a problem with finding the archive logs to process, so I checked first_scn of the capture process to see what scn we need next.
    And then checked:
    SELECT r.CONSUMER_NAME,
    r.NAME,
    r.FIRST_SCN,
    r.NEXT_SCN,
    r.PURGEABLE
    FROM DBA_REGISTERED_ARCHIVED_LOG r, DBA_CAPTURE c
    WHERE r.CONSUMER_NAME = c.CAPTURE_NAME;
    To see which log files are needed, and indeed one of them contained the scn I found before.
    Then I checked that the files in the result of that query indeed exist at that location, and they do.
    What am I missing?

    I suspect you still have an SCN initialisation on.
    did you also abort the SCN initialisation on the schema for apply and capture when you removed the streams ?
    on 10gR2
    for capture :
    execute DBMS_CAPTURE_ADM.ABORT_SCHEMA_INSTANTIATION( schema_name => 'owner');
    for apply
    execute DBMS_APPLY_ADM.SET_SCHEMA_INSTANTIATION_SCN( source_schema_name => 'owner , source_database_name => 'SOURCE_DB_LINK_NAME' , instantiation_scn => null , recursive => true);
    or also :
    exec dbms_streams_adm.remove_streams_configuration;

  • Updater stuck on "initializing", iTunes wont recognize Ipod anymore

    Hi,
    Just got a new Ipod over a week ago, uploaded all my songs and everything seemed to be fine...until today - i've recharged it on my laptop and tried turning it on but it didn't work - went on the support site and finally restored the iPod to Factory Settings. When I connected my iPod again to the Laptop, iTunes didn't recognize my iPod. So I've downloaded the latest iTunes and tried updating the software.
    Now, when i try to update with the iPod Updater 2006-03-23, it gets stuck on "initializing" and iTunes won't recognize my iPod either.
    When I click on My Computer, it comes up as "Removable Disk E" and in Device Manager, it comes up under Disk Drives "Apple iPod USB Device"
    When i switch on my iPod, it seems to be working fine...but i just cannot download any music on it coz my iTunes won't recognize it...
    Please help!!!!
    I use Windows XP, Dell Inspiron 630m and iPod 30GB
    Thanks,
    Cornelia
    Dell Inspiron 630m   Windows XP  

    thanks, i'd appreciate that...
    i went to the ipod store today and have been told that my ipod is fine but my software causes the issues. I'm supposed to delete everything and restore again. Trying to do that now but it's still not working yet. I had Tunebite installed to convert wma to mp3s as well, that might have caused all the trouble. there might probably still some hidden files i didnt get rid of because when i reinstall iTunes, my iPod is still not recognized... i keep u posted as well...

  • Hyperion Uninstall stuck on Initializing

    Hey all,
    When attempting to uninstall using either Add/Remove Programs or Uninstall.cmd, I can make it all the way through product selection and confirmation, however once running the uninstaller is stuck on initializing.
    On attempting to perform a manual removal I am unable to get all components. Deleted Hyperion folder and vpm.properties and relevant registry entries, but it still shows as installed when attempting to perform a reinstall.
    Anyone have any ideas on how to make the uninstaller work (which should be a given) or where to find any remaining components for manual removal?

    Under the installation directory you will find two files set_hyphome_1.bat and .oracle.products. Make sure you delete these two files.
    It is better to go ahead with uninstallation through Oracle EPM System-->Foundation Services--> Uninstall EPM System instead of deleting the Deleted Hyperion folder and vpm.properties and relevant registry entries.
    You might face issues while reinstalling the EPM System all again. Try installing it on the different drive on your machine.
    eg: If You have installed it on C drive the path where you will get set_hyphome_1.bat and .oracle.products.
    C:\Documents and Settings\<name>\

Maybe you are looking for