XCelsius 2008 and Windows 7

My PC has been upgraded from XP Professional to Windows 7 Professional. XCelsius with Fix 3.4 unable to open properties panel for any component for existing or new file. Installed Fix 3.5 and still unable to open properties. Has anybody else experienced this or have suggestions?

Hi,
Install SP4, it supports windows 7 as well as office 2010 32 bit version.
If it wont solve this issue uninstall and then install it again (only SP4).
Good Luck

Similar Messages

Error to install Xcelsius 2008 on Windows vista. Error 1935.

I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
Error 1935 Error al instalar el ensamblado.
"Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

False Duplicate ip address error reported on our windows 2008 and windows 2012 servers

we use windows 2008 and windows 2012 servers our company. my access switches are cisco catalyst 3560.
A sample of a show version command from one of our access switches is as shown below.
SW_01#show version
Cisco IOS Software, C3560E Software (C3560E-UNIVERSALK9-M), Version 15.0(1)SE2, RELEASE SOFTWARE (fc3)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2011 by Cisco Systems, Inc.
Compiled Thu 22-Dec-11 00:16 by prod_rel_team
ROM: Bootstrap program is C3560E boot loader
BOOTLDR: C3560E Boot Loader (C3560X-HBOOT-M) Version 12.2(53r)SE2, RELEASE SOFTWARE (fc1)
SW_01 uptime is 2 weeks, 5 days, 16 hours, 15 minutes
System returned to ROM by power-on
System restarted at 17:31:47 UTC Fri Nov 14 2014
System image file is "flash:/c3560e-universalk9-mz.150-1.SE2/c3560e-universalk9-mz.150-1.SE2.bin"
I will be grateful if any one can help with some solution.
Thank you

Can you post your switch config?
How many switches do you have? Presumably you have more than one, this one is connected to others, and those others have servers and clients?
Try doing a 'show arp' on the switch and comparing the IPs and MACs to your windows server. Do it a few times as it may change as each device using the IP sends packets.

If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.

If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.

Hi,
Each and every tool has its own flexibility to run. Coming to your question, the use of dashboards is to view the data by more interactive other tool cannot comprise it. when you say, if i want to develop the same sort of requirement in other BO tool, then you need to check with positive and negative of the tool to accommodate your logic.
--SumanT

Group policy Preferences server 2008 and windows 7

Hi I have been struggling with an issue with group policy preferences for a while now with regard to pushing out printers to windows 7 (32/64 bit) Machines. I have two DC servers one is 2008 and the other is 2008 r2. I have setup the group policies on the
2008 server as it is the only one i am allowed to access regularly to do this.
Basically here is my problem. I have created multiple GPO's to send out printers from out print server to classrooms across the school district I work for, I have a mix of xp and windows 7 machines. I have the server setup with both 32 and 64bit drivers
for all printers on that server, we have a mix of oki and hp and ricoh. I know all the connections work and the drivers work well, however when I push them out using the group policy, the windows 7 machines don't install the printers. The xp machines do this
perfectly well when I install the client side extensions patch, but they just will not pull down on the 7 machines unless i install the printer first manually, then delete it and then run gpupdate. In that instance it will work, but obviously i don't want
to have to go round thousands of computers doing this manually.
Just as a side note, each classroom has its own user account and its own printer.
If anyone has any advice as to how i can go about resolving this issue i would greatly appreciate it, this has been a problem i have been researching and trying to fix since January.......

Hi,
>>The xp machines do this perfectly well when I install the client side extensions patch, but they just will not pull down on the 7 machines unless i install the
printer first manually, then delete it and then run gpupdate.
Before going further, we can run command
gpresult/h gpreport.html with admin privileges to collect group policy result on the troubled Windows 7 clients to check the issue. Besides, we can also check event logs in Event Viewer to see if some related error events were logged.
Besides, I want to confirm if we have disabled
Point and Print Restrictions under both User Configuration and Computer Configuration. To have a consistent experience, it’s recommended that we disable the policy setting in both locations if we are dealing with mixed-level clients.
Regarding this point, the following article can be referred to for more information.
Point and Print Restrictions policies are ignored in Windows Vista SP2, Windows Server 2008 SP2, and later Windows operating systems
http://support.microsoft.com/kb/2307161/en-us
Best regards,
Frank Shen

Window SBS server 2008 and window server 2008 R2 on the same domain

Hi all,
I am a person only work for linux system. Recently i work for my company that using microsoft technologie. So i have a lot of trouble. Could you please help me and below are my big troble that i have met:
In my system, i have the first window SBS server 2008 run on our domain. However my organization growth up and we have more than 150 users and mailbox of exchange server 2007. So i do not want to use my sbs server 2008 anymore.
I am going to install a window server 2008 R2 64 bit and join it into the same domain with sbs server 2008. It will be replicate the username, dns, OU and group policy...After that i will tranfer FSMO role to new server and i will demote then remove the
sbs server.
My boss say that i should not use this solution because window server sbs can not run with any other kinds of window server 2008 (R2, standard, enterprise...) and it will automatically shutdown the main server after a couple of days.
Someone have experience can help me. I am so confuse now

Maybe this will also help to better understand the steps involved:
Transition from Small Business Server to Standard Windows Server
http://blogs.technet.com/b/infratalks/archive/2012/09/07/transition-from-small-business-server-to-standard-windows-server.aspx
Migrating away from SBS 2011
http://social.technet.microsoft.com/Forums/en-US/07c58cc4-7d6d-419a-b1a0-439c2cc0c48d/migrating-away-from-sbs-2011?forum=smallbusinessserver
Migrating from SBS 2008 to Windows Server 2012 R2 (NOT Essentials and with NO Exchange)
http://social.technet.microsoft.com/Forums/en-US/1276d2d3-a8f2-4786-82f3-4308a2affb11/migrating-from-sbs-2008-to-windows-server-2012-r2-not-essentials-and-with-no-exchange?forum=smallbusinessserver
And remember, as long as you don't move the PDC to one of the new DCs, you can leave the SBS 2008 up indefinitely. But I would remove Exchange 2007 off it right away once I've migrated the mailboxes and public folders, otherwise
you will get yourself into an Exchange coexistence scenario which is much more complex to configure and support because of the CAS differences, changing the URLs on the old one to "legacy.domain.com," getting a new UC/SAN cert with the correct
names on it, and more. Believe me, you really don't want to coexist them. The only time I've coexisted Exchange versions is during large migrations, such as 500 or more. Otherwise, I just migrate the mailboxes over a weekend and get it done with.
Ace Fekay
MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
Microsoft Certified Trainer
Microsoft MVP - Directory Services
Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
This posting is provided AS-IS with no warranties or guarantees and confers no rights.

Sql server 2008 and Windows 8

Hi
I published my WPF application using VS 2010 Express edition and trying to install it on Windows 8. The application runs but when it comes to searching the database that was included in the installation package it gives the error
"This program has compatibility issues Microsoft SQL Server(2008 and 2008 R2)"
The installer when setup was run did download SQL Server so I am not sure why I am getting this error. Any advice?

Hello,
Service Pack 3 for SQL Server 2008 is required to make it compatible for Windows 8 or Windows 8.1. For more information,
please read the following Support article:
https://support.microsoft.com/kb/2681562?wa=wsignin1.0
You can download SP3 from the following URL:
http://www.microsoft.com/en-us/download/details.aspx?id=27594
If you are installing SQL Server 2008, continue setup despite of the warning and apply SP3 after installing SQL Server 2008.
Hope this helps.
Regards,
Alberto Morillo
SQLCoffee.com

Error on installation (Crystal Reports 2008 and Windows 7)

Hello,
I'm trying to install Crystal Reports 2008 on a Windows 7 laptop. Receiving Error 1904, Module C:\PROGRAM FILES\BUSINESS OBJECTS\BUSINESSOBJECTS ENTERPRISE 12.0\win32_x86\ReportConvTool.dll failed to register. This seems like a premissions error, but I have full admin rights on this system.
We are starting training next week and I need to get the software installed.
Any help you can provide would be great!
Thanks!

I have been looking and found the exact error above.
So 2 of us have it but as yet there is not a fix.
I understand that SP3 will help, but my problem at this second is I can not get the productr toload for the first time.
Thus I do not think I can apply SP3.
Or (which is possilbe) am I wrong
I will give it a go
Thanks
Edited by: Julian Gadd on Sep 21, 2010 6:34 PM
Edited by: Julian Gadd on Sep 21, 2010 6:34 PM

Difference between windows server 2008 and windows small buisness server

dear,sir/madm
i need a differeces between windows small buisness server and winndows server 2008.
plz get me perfect answer
regards,
Abhilash

Hello,
main difference are that SBS is limited to 75 users and not able to create a trust. Also it comes with additional software like Exchange and SQL depending on the license you use.
The regular server version do NOT contain any application or server as SBS. This must be bought separate. Also there is no user limit and tursts are allowed.
Best regards
Meinolf Weber
MVP, MCP, MCTS
Microsoft MVP - Directory Services
My Blog: http://msmvps.com/blogs/mweber/
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

MacBook (Aluminium late 2008) and Windows 7

Hi
I have a late 2008 aluminium MacBook and I need to install Windows 7. I see that I need to install Snow Leopard in order to run Windows 7 so have ordered that. However, I notice that Windows has either a 32-bit and 64-bit installation. From the apple FAQs it would appear that only late 2009 MacBooks can have the 64-bit install. So... two questions. (1) In practical terms, what is the difference between a 32-bit install and a 64-bit install - i.e. will it make much of a difference to me and which Windows-based programmes I can install; and (2) if it would be better to have the 64-bit install, how do i tell whether my MacBook could take it?
Advice would be much appreciated!
Thanks
DonB

Hi DonB,
in essence the only 'real' difference between 32-bit Windows and 64-bit WIndows is the amount of useable RAM memory.
32-bit WIndows can only address up to 4GB of RAM with something between 3GB to 3.5GB useable.
64-bit Windows does not have this limitation.
And of yourse you would need to install 64-bit Windows when you want to use 64-bit WIndows programs.
Since your signature says 2GB, I would propose to get the 32-bit Windows 7
The Apple FAQs are quite trustworthy in this case although there are some user reports to have installed a 64-bit Windows on a Mac that is on the not-supported Apple list.
But as said, in your case it wouldn't be worth the hassle.
Regards
Stefan

Xcelsius 2008 and Flex SDK

Hello all,
I'm new to Xcelsius and Flex SDK and I don't get any information about that:
For what do I exactly need Flex SDK? Only if I want to implement a new template for Xcelsius like a "better" property-panel?
I also want to know, when I want to store data out of my dashboard, can I use and handle them directly in a Web Dynpro environment?
Does anyone have experience with that or could help?
Thanks in advance
best wishes, Bonita

Hi Bonita,
Xcelsius provides standard set of visual components, but in some situation we might need some functionality that is note there in standard set of components. That is where flex comes into picture with the help of Flex SDK we can develop custom components and then use the Xcelsius SDK to compile and use that as an add on inside Xcelsius. Custom build components are also available in marketplace (we can opt from a large set of variants, developed in Flex & Xcelsius SDK). Flex coding is mostly done in MXML and events are Handeled with Action Script.
Note : We need Flex SDK along with Xcelsius SDK only when we need to create some custom component. Xcelsius SDK can be downloaded from SAP Website or can be installed during Setup installation.
Data can be exported out of Xcelsius with the help of External Interface connection. Sample is available in the extracted installation file. Data exchange is Handeled with scripting language. Don't know Web Dynpro environment supports the scripting or not.
Good Luck

Xcelsius 2008 and Vista Issues

Hi All,
I'm using Live Office(XIR2) to live connect the data to the dashboard. Four objects are imported from Webi via Live office and one of the objects is table with 400+rows. the excel has some calculations on the raw data and the size of excel is around 450kb.
When I try to export the XLF file with the imported excel and about 12 components(in the VISTA OS) the xcelsius program is automatically stopped after some time and hence cannot generate the swf. At times the exporting is causing my system to crash.
Is this a problem of the complex excel, LO connectivity or Xcelsius instability with Vista? Any thoughts?

Don't think you have to go through that process. Make sure you have the right format in the embedded excel (Right click on the cell-> format cells), and then just bind the component again.
Regards

What's the difference between windows server 2008 and windows server 2012 ?

I would be thankful if anyone would give a comparative point of view of both products.

Hope following link will help you to find the right answer. this link will download a pdf file to your computer.
https://www.google.co.in/url?sa=t&rct=j&q=&esrc=s&source=web&cd=3&cad=rja&ved=0CFMQFjAC&url=http%3A%2F%2Fdownload.microsoft.com%2Fdownload%2F2%2FC%2FA%2F2CA38362-37ED-4112-86A8-FDF14D5D4C9B%2FWS%25202012%2520Feature%2520Comparison_Hyper-V.pdf&ei=Fv_RUMHfMsK4rAfsqYDYCA&usg=AFQjCNGhSRusi2Gp7K386Gpu24mzLfbF9Q&sig2=nCWPUQ6Y7aGsNBqKCCed5Q&bvm=bv.1355534169,d.bmk
Regards,
Praveen Kumar (IT consultant)
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Xcelsius 2008 & Windows 7

Hello,
I was wondering if anyone could shed some light on when Windows 7 will be a supported operating system for Xcelsius 2008? My understanding is that it will be supported at some point in time. I have potential clients that won't purchase the software unless it is supported or there is a defined time frame. I believe they are worried that a new edition will come out right after they just spent the money on the old one. Any insight would be appreciated.
Thanks,
Tom

Yes there is issue of exporting flash files into BOE. The File name textbox is not visible, seems there is some frame issues. But you can still overwrite the file contents. Else create the flash file from CMC and then overwrite them using xcelsius export. This worked fine for me.
Does anyone have a list of issues while working between Xcelsius 2008 and Windows 7. Please post if available.
Thanks,
Kishore BG

Xcelsius 2008 SP3 and SAP Netweaver 7.01 Connection

Hello everyone,
Im getting the next spanish error "El sistema al que está conectado en estos momentos no es BW 7.02 ni posterior. Desconéctese y elija otro sistema.". Just when im trying to connect xcelsius 2008 and sap netweaver 7.01. I get this error when i try to set a SAP Netweaver BW Connection.
My configuration is like this:
Server Side:
Windows Server Enterprise 2008 SP1 64 bits
BusinessObjects Enterprise XI 3.1 SP2 FixPack 4
Java Connector (Jco): 2.1.8 32 bits
Integration Kit for SAP BusinessObjects XI 3.1 SP2 FixPack 4
SAP GUI 710 Patch Level 14
Client Side:
OS: Windows 7
Xcelsius Designer 2008
Thanks a lot to everyone
ramonms

Ashish thanks for your reply,
im not using a live office connection, my problem is from xcelsius directly.
I try to connect using the sap native client (SAP LOGON APPLICATION) and i have no problem, it works fine.
in the client side i also have installed SAP GUI 710 patch level 11 but also i tested with level patch 14
thanks
ramonms

XCelsius 2008 and Windows 7

Similar Messages

Maybe you are looking for