Xcelsius 2008 - Unable to preview changes made in design mode

Xcelsius 2008 - Unable to preview changes made in design mode
I have installed Xcelsius 2008 (RTM) and also Service Pack 1 / Fix Pack 1.1. Unfortunately, I can now not preview changes I made in design mode (but can see the change in design mode). In addition, if I save the changes made to the Excel spreadsheet (using this as the datasource) and then exit out of the application, then go back in, the changes have not been saved?!
I have also installed Fix Pack 1.3, but the same issues occurs.
This is causing us issues as we have developed a number of dashboards that can no longer be updated.
Please could someone advise?
Many thanks,
Neil.

I would recommend decomposing large sets into more manageable sets. For instance, if you have data for a very large regional district, decompose the data into smaller sets for sub-districts.
As for a paper, I'm not sure, but the main determinant of performance is how many cells you bind to the component. For a typical component on a typical computer, I'd recommend no more than 9000 cells. On a weaker computer less, on a stronger computer more.

Similar Messages

Xcelsius 2008 Unable to preview with connection

Hello,
I'm working with BPC 7.5 for Microsoft platform and I'm trying to integrate it with Xcelsius using EPM Connector.
When I try to preview the screen get struck and just displays "Initializing".
If I remove the connection it works fine.
please give your suggestions.
I tried to install Crystal Reports 2008 FP 3.5 but am not able to install it as it says "the target product is missing or missing the correct version for this update"
Need your expert advice.
thanks,
Bala

Install Xcelsius fix 3.5

Xcelsius 2008 Unable to preview BPC Data with EPM connection

Hello,
I'm working with BPC 7.5 for Microsoft platform and I'm trying to integrate it with Xcelsius using EPM Connector.
When I try to preview the screen get struck and just displays "Initializing".
If I remove the connection it works fine.
please give your suggestions.
I tried to install Crystal Reports 2008 FP 3.5 but am not able to install it as it says "the target product is missing or missing the correct version for this update"
Need your expert advice.
thanks,
Bala
Edited by: Bala on Jun 14, 2011 6:13 PM
Edited by: Bala on Jun 14, 2011 6:17 PM

Install Xcelsius fix 3.5

If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.

If someone has used Xcelsius 2008, and suddenly there is requirement to design the dashboard in any other BO tool, then will he/she be able to design the dashboards as comfortably as in Xcelsius.

Hi,
Each and every tool has its own flexibility to run. Coming to your question, the use of dashboards is to view the data by more interactive other tool cannot comprise it. when you say, if i want to develop the same sort of requirement in other BO tool, then you need to check with positive and negative of the tool to accommodate your logic.
--SumanT

Unable to open jsp file in Design mode

Hi,
I am unable to open jsp files in design mode, I am using eclipse Version: 3.6.1.
Please help.
Regards,
Ale Hasan

Hi Ale,
Thank you for the additional information. Unfortunately, there does not seem to be anything unusual about your project based on your description. I'm surprised you don't see any processes listed in the process view while waiting for the page to open. I thought you might see something related to a queue manager job to "Manage Resource Event Jobs".
Are there any messages in the error.log? You can open a view to the error log from the menu option, "Window -> Show View -> Error Log". I'm curious if there are any messages about a process timing out, unable to reset some object within a certain time, or any exceptions logged.
If you change to another workspace with just a single JSF web project containing a smaller number of JSP, do you experience the same behavior?
Can you also try using a more recent release of OEPE to see if that helps? The 11.1.1.6.1 release is about a year old.
http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
Kind regards,
Carlin

Xcelsius 2008 doesn't preview...

OK, I'm going crazy. I've just installed Xcelsius 2008 SP1 on a Vista OS notebook. It won't preview, either on a new blank file or a sample (nor will it export to any file type....I get the generating Swf notice for abt 5 secs and then it goes away.....nothing else). I've checked that UAC is off, run as Administrator, checked the player security settings, and re-installed multiple times. Any suggestions?

Hi Craig,
Have you removed the previous installation before installing it?
Margaret

Xcelsius 2008:Unable to Launch Report in Web Browser via Reporting Services

I am trying to create a dashboard in Xcelsius 2008 using SQL Server Reporting Services.
In the properties of the 'Reporting Services' button I have selected the 'Select Report' button.
Once I have input the reporting services URL and select 'submit', a list of all my reports appear on the left hand side. The problem occurs when I select the 'Launch Report in Web Browser' button. When a new browser opens, the URL is trying to access the local host instead of the correct server.
Do any additional settings need to be updated?
Thanks,
Natalie

I am trying to create a dashboard in Xcelsius 2008 using SQL Server Reporting Services.
In the properties of the 'Reporting Services' button I have selected the 'Select Report' button.
Once I have input the reporting services URL and select 'submit', a list of all my reports appear on the left hand side. The problem occurs when I select the 'Launch Report in Web Browser' button. When a new browser opens, the URL is trying to access the local host instead of the correct server.
Do any additional settings need to be updated?
Thanks,
Natalie

Style changes show in Design mode but not in Live View or online.

I'm using CS5. I modified a style sheet and the changes showed up in Design mode just the way I wanted them. I switched to Live View and they did not show up. I put the new style sheet on the server and it the changes do not show up online. The basic change was to add a border around some text that serves as a link to another page in the site. The source code can be viewed here: The Akshaya Home | Akshaya USA. The relavent lines are 71 and 72 at the bottom of the banner div. The CSS code is:
.button_donate{
          font-family: Arial, Helvetica, sans-serif;
          font-size: 24px;
          padding: 0px 8px 0px 8px;
          border-top: 3px;
          border-top-style: solid;
          border-top: #1C778C;
          border-left: 3px;
          border-left-style: solid;
          border-left: #1C778C;
          border-bottom: 3px;
          border-bottom-style: solid;
          border-bottom: #0A2B33;
          border-right: 3px;
          border-right-style: solid;
          border-right: #0A2B33;
          position: absolute;
          right: 50px;
          top: 139px;
.button_volunteer{
          font-family: Arial, Helvetica, sans-serif;
          font-size: 24px;
          padding: 0px 8px 0px 8px;
          border-top: 3px;
          border-top-style: solid;
          border-top: #1C778C;
          border-left: 3px;
          border-left-style: solid;
          border-left: #1C778C;
          border-bottom: 3px;
          border-bottom-style: solid;
          border-bottom: #0A2B33;
          border-right: 3px;
          border-right-style: solid;
          border-right: #0A2B33;
          position: absolute;
          left: 40px;
          top: 140px;
Any help will be greatly appreciated.
Ed

Try this:
.button_donate {
    font-family: Arial, Helvetica, sans-serif;
    font-size: 24px;
    padding: 0px 8px 0px 8px;
    border: 3px outset #1C778C;
    position: absolute;
    right: 50px;
    top: 139px;
Repeat with .button_volunteer.
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
http://alt-web.com/
http://twitter.com/altweb

When snapping a rectangle to the top of the page left space between rectangle disappears in the preview (not in the design mode)

I think the image looks more descriptive than my words actually.. When I move the first rectangle to the top of the page the gradient background disappear in the preview (on the right side of the screen), even though I still can see that in my Design Mode (left handside). Everytime the top rectangle snaps to the top of the page the second rectangle snaps to the first one in the preview (both muse preview and browser preview)...Any help?

Seems you have applied scroll on second rectangle with key position setup on top of the page edge as a result when page edge is reached the second rectangle scrolls up on the page.
If this is not the case then please provide more details.
Thanks,
Sanjit

Can't see preview of .oam in design mode?

I can't see preview of my .oam in design mode. I can see it fine in preview mode, but I just see a blank box in design mode. I play, but I would at least expect a preview of it. In the tutorial I believe I saw that, so maybe there is something I'm not doing or am experiencing a bug?
Here is a screenshot of design mode
A screenshot of preview mode

Quit the mail app, launch the app again and then look to see if the messages appear, if not - quit the mail app and restart the iPad.
Go to the home screen first by tapping the home button. Quit/close open apps by double tapping the home button and the task bar will appear with all of you recent/open apps displayed at the bottom. Tap and hold down on any app icon until it begins to wiggle. Tap the minus sign in the upper left corner to close the apps.
Restart the iPad. Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
If that doesn't work, reset your iPad.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Can't save any changes made in EDIt mode?

HI all
I am new to apple products ... but I am now playing with iPhoto 11. I am able to import my photos from my camera with no problems. And then, in EDIT mode, under "adjust" I am able to make a lot of nice changes - De-noise, sharpness, etc.. - but I don't have a button to allow me to save? I have looked at the user guides on line and they talk of a DONE button - but I don't have one? And when I go back to the photo library and look at the photos there, the changes I have made are not shown. But if I click on each photo individualy and click on EDIT again - the changes I made are saved? But I can only see my changes whilst in the EDIT mode per photo?
How do I save my edits back to the photo library? I want to uploaded the photos with the changes I made - but everytime I try an upload -- even a single photo - I get the original photo before my edits
Any help would be appreciated please
Thanks
Chris

Your database is a bit mucked up (<- Technical term, that)
Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Rebuild iPhoto Library Database from automatic backup.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. This will create a new library based on data in the albumdata.xml file. Not everything will be brought over - no slideshows, books or calendars, for instance - but it should get all your albums and keywords back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one. .
Regards
TD

Changes made in Design view does not update on Run

Hello,
I add a button, or move some components around has no effect when I run the application. I am using Flash Builder for PHP 4.5 and there is no way to tell FB to compile the mxml file. In other Eclipse distribution, you have Compile and Run. I only have Run.
Previously, clicking Run would make the changes visible. Now, that does not work. I always see the old view. I have tried doing a Clean, but without success.
I would appreciate any input on this matter.
Thank you.

So again: What did not work:
1) Clean build
2) deleting relevant swf files
Point 2 hinted me what to do. If the file is inexistant and Google Chrome still opened it, then the most probable reason was the cache. After clearing the Chrome cache, my swf files were loaded with the changes I made.
I have stopped using Chrome now, and back to old Firefox. Firefox is a memory hog, but it just works.
Hope the above provides help to anybody having the same problem.

Unable to preview form in Livecycle Designer

Adobe Acrobat: 9.0.0
Adobe Livecycle Designer ES: 8.2.1.3144.1.471865
I load a form and when I click on the Preview tab I receive a blank popup box
How can I fix this? Thanks! I've already tried uninstalling/re-installing Adobe Acrobat without any luck.

Hello,
you should use your file manager and if you don't find your Adobe directory by clicking, please use search function. Here a screenshot (detail) of mine:
Do it in the same way with your browser programs and don't fear to copy them into the Adobe directory. In this case I use two "windows technique". On the other hand I prefer "SpeedCommander 12" for these operations.
Hans-Günter

What happened? I can no longer see property changes in the design mode/

I'm not sure what I did to make this change, but previously
when I use the property values as opposed to html code to make
changes, color, formatting, etc, it could be immediately viewed
without out going out to the browser.
I would view with browser and maybe make a few changes here
and there to html to finess, but primarily I could do all in the
design layout.
Now, even when I color text, it doesn't show until I preview
in browser. Changes in font size, color, etc, nothing can be seen
until I go to preview and save.
Can anyone tell me what change I made to cause this?
Thanks for your help in advance. Sharon

VIEW | Style Rendering > Display Styles
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
==================
"YBBD" <[email protected]> wrote in message
news:gnhkjh$7ap$[email protected]..
> I'm not sure what I did to make this change, but
previously when I use the
> property values as opposed to html code to make changes,
color,
> formatting,
> etc, it could be immediately viewed without out going
out to the browser.
>
> I would view with browser and maybe make a few changes
here and there to
> html
> to finess, but primarily I could do all in the design
layout.
>
> Now, even when I color text, it doesn't show until I
preview in browser.
> Changes in font size, color, etc, nothing can be seen
until I go to
> preview and
> save.
>
> Can anyone tell me what change I made to cause this?
>
> Thanks for your help in advance. Sharon
>

Pie Charts causing Design mode to give warning and not preview the app

I am using the final release. I have pie charts in my app. I
also have column charts. Both are fed data the same way. Both work
as expected when i build the app, and there are zero errors in the
app. however, i was experiencing an issue in flexbuilder where in
design mode, a vague warning was issued and the preview could not
be displayed (blank except for very gernal 'outlines' of the layout
and controls)
I narrowed the problem down to the pie charts. Is anybody
experiencing this problem? The application worked as expected, and
previewed as expected in Design mode when previewd/built in Beta
3.

Hi masavran,
For this issue, it's related to the render environment (browser/application). On Reporting Services side, we don't have any properties to change the resolution for chart to make it smoothly. We suggest you post this thread on Visual Studio forum
http://social.msdn.microsoft.com/Forums/vstudio/en-US/home?forum=visualstudiogeneral&filter=alltypes&sort=lastpostdesc
Or the forum of corresponding browser.
Best Regards,
Simon Hou

Xcelsius 2008 - Unable to preview changes made in design mode

Similar Messages

Maybe you are looking for