Xcelsius 2008 Version/Build Number not Changing

Hi All - quick question.
I have applied all SP/HF's in order and my build number is still reading as this in the help section:
Xcelsius Version 5.1.1.0
Build Number 12,1,1,344
I did not encounter any erorrs when installing the SP/HF's. Has anyone else encoutnered this problem?

Hi Micheal,
Goto > Control Panels > Add / Remove programs. and check whether all the service packs and hot fixes are listing there?
Also goto the installation path and right click on Xcelsius.exe and see what is the version number and build number for your xcelsius.
Regards,
Vinay

Similar Messages

Compiling fmb module in Form builder does not change the fmx file

Hi,
I am using Oracle Forms Builder version 10.1.2.0.2 To edit 10g2 forms.
In the last month, it happened twice that an fmb file I edited in the forms builder did not change the fmx aftrer compilation.
namely, when I opened the fmx file in the application, I didn't see the changes, but they were present in the fmb form opened in the Form Builder.
Usually when we have the fmx file open in the application, the form builder won't let me compile it - showing the following error:
FRM-30087: Unable to create form file
When this error happens and the changes are not reflected, this error message doesn't appear even though the fmx file is open in the application.
I tried deleting the fmx file, and then opening it in the application to see if there is another copy of it.
The application gave an error 40010 - can't read form.
When I recompiled the file, the fmb didn't show any changes either, even though the file was created again in the file system.
I could not find a way to consistently reproduce this problem.
Did you ever encounter such a problem?
I noticed the edit -> preferences -> general menu has the option to "save befor building".
Does it mean the Form Builder keeps a cached copy of the fmb in memory, and when this error happens it compiles the original file system fmb file rather than the cached memory copy with the changes?
Thanks,
Eyal Azran
Configuration Management Engineer - Isracard

Hey Craig,
Thank you for your response.
I verified the version of the forms on the Application Server and they are the same.
This problem is quite tricky to reproduce, it happens once every few months!
(we have about 10 developers, who are developing and testing on multiple servers - so far two of the servers showed this issue)
I've determined that the reason this happens is that:
1. The compiled fmx is vied in the application.
** for some reason, the frmweb.exe process on the server does not terminate properly **
2. The developer compiles the form again in Form Builder
3. The Form Builder does not detect that the form is open in the mal-terminated process
There usually is an error message here saying the fmx module is locked - this error happens because this message is not displayed.
I will attach an image of the process monitoring tool we use ( ProceXP ) showing the ghost process that locks the fmx module.
<edit>oops, I guess I can't attach the image- I can e-mail it if you'd like</edit>
If anyone has an idea for a solution, this will help immensely.
Eyal
Edited by: Hey_Al on 06:04 06/05/2010

In sales quotation document number not changed..

hiii guys
i getting some problem in sales quotation about document number.....
actually i opened by another user like sham.he is sales department..he have only sales authorizations..when we press add button, data has been saved..but number not changed... but after saving,we close form and open again then that that time number automatically changed..its comes serial number..when we press add button,,we getting same problem...

hi
I think you got confused with document and draft no on Approval documents.
Ofcourse many user,got this confusion.
The Document number wont be generated in Sales Quotation till you add it(i.e when waiting for approval)
The document number which is shown in that document when pending for the approval, is not the finalised number.
Its just the next number of sales quotaion which wont get stored in sales quotation,rather it will store in Draft table ODRF.
when you have too many documents which is waiting for approval,you can notice that document number will be same for all the other documents.
So you note down the Draft Number which is UNIQUE.
For Ex:
you are creating sales quotation which has the document number as '335'.
so when you sending it for approval the draft number will be staored as '211'.
after getting the approval,when you add it,document number will be generated as '337' because two documents were posted when the draft no:211 is waiting for approval.
revert me for any clarification.
Edited by: kambadasan on Feb 23, 2012 1:41 PM

Xcelsius 2008 u2013 Icon Transparency not working?

Post Author: Schuster
CA Forum: Xcelsius and Live Office
Hi all,I have a control using icons with the Transparency set to 0%. They were working in 4.5, they were completely transparent, but after the upgrade to 2008, they did not work anymore
From the help files:
xcelsius 4.5: 0 being completely transparent, and 100 being completely solid. xcelsius 2008: 100 being completely transparent, and 0 being completely solid.
But in 2008 I do not see any difference between 0 or 100%, the icon is always completely solid
Is that a bug? Am I missing something?
Thanks,

Please try adding a new icon to the canvas and adjusting the transparency. Let me know what happens as this works fine for me.
Thanks,
Gerrit

PAC code provided, number not changed

Yesterday I provided a PAC code at around 17:00, and I have had no notification that my number has changed or the process has even begun? any help appreciated!!

It could be any time the following working day, but if you missed the 17:30 deadline it will be a further working day.

13.0.1.1 update - Version number not changed

Hi,
I downloaded and installed the 13.0.1.1 patch for PS Windows but the about box still shows version 13.0.1. Did something go wrong or is this normal?
Morevoer, contrary to what is announced in the forum header message, using the Help | Updates menu doesn't trigger any update. The 13.0.1.1 update is only available from the Security certificates updates page.

Moral of the story: People care about the details.
For those basing their livelihood on Adobe products, the ability to manage what's installed and when it's installed carefully is more than an idle curiosity.
Yes, I understand that Adobe feels they take on additional risk by rebuilding everything. Adobe, you should work to minimize that, so that you can be confident in your build processes.
My advice is to not take shortcuts in the future.
-Noel

Version/Build number hasn't incremented after updates

Hi,
I've deployed another ColdFusion 10 RHEL6 server and due to some firewall issues it isn't able to connect to the update center to grab the hotfixes.
So I copied the jar files from another server that I was able to update successfully and ran all the updates manually.
Now when I log into the CF administrator the build/version number has not gone up to what I expect. Does anyone have any ideas?
The installation log had one nonFatalError, but I got the same on the existing server
Installation: Successful with errors.
107 Successes
0 Warnings
1 NonFatalErrors
0 FatalErrors
Existing server with no issues
Server Product
ColdFusion
Version
ColdFusion 10,282913
Update Level
02
Tomcat Version
7.0.23.0
Edition
Enterprise
Serial Number
Operating System
UNIX
OS Version
2.6.32-279.2.1.el6.x86_64
Update Level
/opt/coldfusion10/cfusion/lib/updates/hf1000-3332326.jar
Adobe Driver Version
4.1 (Build 0001)
New server, updated manually
Server Product
ColdFusion
Version
ColdFusion 10,282462
Update Level
Tomcat Version
7.0.23.0
Edition
Enterprise
Serial Number
Operating System
UNIX
OS Version
2.6.32-279.9.1.el6.x86_64
Update Level
/opt/coldfusion10/cfusion/lib/updates/hf1000-3332326.jar
Adobe Driver Version
4.1 (Build 0001)

@raZorTTZ,
The version number issue has been raised with Adobe (most notably by Adam Cameron, see the comments for another post on this forum: http://forums.adobe.com/message/4671031#4671031). He also discusees it at length on this blog entry: http://adamcameroncoldfusion.blogspot.co.uk/2012/09/which-version-of-c oldfusion-am-i.html and this one: http://adamcameroncoldfusion.blogspot.com/2012/09/which-version-of-col dfusion-am-i_5.html.
-Carl V.

Log version status does not change

Hi,
For a synchronous scenario, I'm getting the status as 'Log Version' in sxmb_moni and the status doesnot change at all. Can you please let me know the reason for this and how the message status can be changed to successful.
Thanks
Sreenivas

HI,
This already explained in above note please do accordingly..
See below..
Symptom
Synchronous messages with message status 001 were made persistent in the database. This can occur, for example, when synchronous messages are being logged. These messages are not deleted by the Delete job.
Other terms
Delete, synchronous messages, message status
Reason and Prerequisites
You use the SAP NetWeaver Exchange Infrastructure.
Solution
Implement the attached correction instructions or import the Support Package listed below.
See the note.. for more details..
Note 930181 - Deletion of synchronous messages with message status 001.
Also see the note
Note 820149 - Deletion of manually changed and terminated messages
Also see the below threads
sxmb_moni, table sxmspmast, Messages with ICON_LED_RED, report RSXMB_SELECT
SXMB_MONI: LogVersion
Points rewarded if it is useful....
Regards
Chilla..

Purchase Requisition number not changing when sales order item is rejected

Hi all,
I have a requirement to change the sales order status to 'TECO' when ever some reason for rejection is selected in the status tab at the item level.The status should change from 'TECO' when i remove the reason for rejection.
The status change is happening correctly.I have achieved it using user exit.
CASE 1 : Initially, when a new item is added in the Sales order the purchase requisition number appears in the schedule lines tab of the item level. This is as expected.
CASE 2 :When the same item is blocked (by entering a reason for rejection in status tab of VA02 ) then the purchase requisition number is not present in the schedule lines tab.This is as expected.
But i face the following issue.
CASE3 : Again if the blocked item is unblocked (By removing the reason for rejection in status tab of VA02 ) then the purchase requisition number does not appear again in the schedule lines tab.The purchase requisition number is expected to appear again.
This happens in case of DROP SHIPMENT scenario. I understand that in case of dropshipment scenario the purchase requisition number is triggered by item category and schedule lines only.
I tried to make the changes(to change the status ) in user exits 'MV45AFZZ' and also 'MV45AFZB'.But i face the issue in both the exits.Please let me know if there are any means to solve this issue(as mentioned in case 3).
Regards,
S.Suba

Many thanks for your answer. It help me to solve the issue.
So applying note 738171, with transaction OVB5 (or VOFM, requirements->subsequent functions->Purch.requisitions) we create one new requirement, ie RV07A900, and then we apply the rule that if we have delivery or billing block, that is, VBAK-LIFSK or VBAK-FAKSK not empty, then we set an error with a code similar to this:
            da_sy-msgid = 'Z1'.    (message class)
            da_sy-msgno = '001'. (message number)
            error_exception = true.
and then the PR is not created.
Regards.

Number not change in excise invoice print

hi all,
we have a problem with excise invoice print.
previously invoice created with number 49, now new number get posted with 49 again.
check in J1I9 for number range. it shows current number 49 means print out expected number was 50 but it prints 49.
can somebody helps me to identify error ?
thanks in advanced.

Dear,
Please go in change mode and check it's setting is like that,
Subobject data element : J_1ISERGRP
To-year flag                  : Tick
Number length domain   : NUMC10
No interval rolling           : No Tick
Number range transaction : Blank
Regards,
Sandip

WRT54G version 5 can not change settings

After using my router and it working for months, I now try to login to 192.168.1.1 and most links do not showup, the screen is basically empty, and I can not upgrade firmware and change settings beacause of this. How do I fix this? Thanks for responses.

First disable all firewall & antivirus software on your computer ......
Click start control panel >> Internet options >> delete cookies & files >> clear history > click apply & ok ....close browser ......
Reset the router for 20-30 seconds .....
Login to set up page again see if it is showing all tabs or not ....

Is the latest patch SP3 compatible with all version of Xcelsius 2008?

My Xcelsius 2008 version is 5.2.0.0 build number 12,2,0,608. Should I install the SP3 update posted Dec 2009?

Hi,
Please go through the release notes of SP3 they mentioned clearly details about installation and pre-requisites.
note: 1417946( from this note it says that you can uninstall the previous versions and install sp3)
Thanks,
SK.

My list of Xcelsius 2008 Problems (so far)...

Post Author: jezbraker
CA Forum: Xcelsius and Live Office
Been using it for a couple of weeks now with a view to moving our solution over to this to make use of the OFFSET function which should get around the performance issues we have faced in 4.5.Build info...Xcelsius 2008 version 5.0.0.99 build 12,0,0,121Windows XP sp2, Office 2003. 1) If you upgrade a 4.5 file into 2008 the list of components available is different to if you had created a clean 2008 file u2013 backgrounds change etcu20262) Transparency of the icon object seems to have been reversed in 2008 - things that were invisible in 4.5 have now all become visible!3) Grid behaviour has changed - now if a cell is empty the visible cell is compressed which looks pretty silly.4) The option to change the text colour based on Alert status within a grid has been removed - this means indicator flags can not be hidden making grids useless for showing any sort of complex alert.5) Stability of the product is very poor when the number of components used gets high...6) The product was formerly very WYSIWYG - but when a xlf is upgraded to 2008 the fonts shown in dev time are quite different in size to those shown in preview/swf7) Any 4.5 XLF that has an image component that contains an SWF fails to upgrade - it crashes during the rendering of the components.8) Memory usage seems very high in 2008 - just opening the product with an empty xlf uses up to 200mb. When dealing with pretty complex xlf's it goes to about 350mb! Good excuse for a memory upgrade though ;)Anyone else having the instability issues? It could well be down to the locked down environments on the machines here so I will test it on a clean VM when i get chance...On the positives the new dev environment is much better (putting aside instability mentioned above) and the expansion of supported excel functions is much appreciated :)I very much look forward to the SP in July...Cheers,jez.

Post Author: RB_UH
CA Forum: Xcelsius and Live Office
Hi,
I did not use the previous 4.5 version. We purchased Xcelsius 2008 last month, and so far we were excited of what we "thought" it could do. But the stability is extremely poor. I am trying to do a dashboard with tabs and accordion menus, line charts and texts; but it gets crazy after loading so many components and then it won't open the canvas again. I have to back up my work every 2 hours, because I lost my dashboard (and had to do it all over again) 7 times within a day!!
We are testing Xcelsius 2008 using right now the import from excel functionality. But our goal is really to connect to a reporting database or XML data from PeopleSoft. With that said, is the Xcelsius Enterprise Server or the Engage version any better on stability? Or do those crash all the time as well?
Is the SP that will be released in July applicable for all versions?
Thank you,
Rita

FU4CIListener build.xml not setting properties?

I am following the Ant Task Setup. I have flex sdk 3.6.0.X, apache-ant 1.8.2 and the flexunit source 4.1.0.
When I run > ant -v clean package
function(){return A.apply(null,[this].concat($A(arguments)))}
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: C:\projects\FlexUnit4CIListener\build.xml
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
parsing buildfile C:\projects\FlexUnit4CIListener\build.xml with URI = file:/C:/projects/FlexUnit4CIListener/build.xml
Project base dir set to: C:\projects\FlexUnit4CIListener
parsing buildfile jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
Importing file C:\projects\utils.xml from C:\projects\FlexUnit4CIListener\build.xml
Overriding previous definition of reference to ant.projectHelper
parsing buildfile C:\projects\utils.xml with URI = file:/C:/projects/utils.xml
[macrodef] creating macro gpg
[macrodef] creating macro sonatype-bundle
Overriding previous definition of reference to ant.projectHelper
[property] Loading Environment env.
Property "build.version" has not been set
Property "build.number" has not been set
Property "build.sdk" has not been set
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, report, package, deploy, ]
clean:
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\bin
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\docs
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\sonatype
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
Build sequence for target(s) `package' is [init, compile, report, package]
Complete build sequence is [init, compile, report, package, clean, deploy, ]
init:
    [mkdir] Skipping C:\projects\FlexUnit4CIListener\libs because it already exists.
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\sonatype
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\docs
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\libs
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
compile:
    [compc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [compc] Adobe Compc (Flex Component Compiler)
    [compc] Version 3.6.0 build 16995
    [compc] Copyright (c) 2004-2007 Adobe Systems, Inc. All rights reserved.
    [compc]
    [compc] command line: Error: configuration variable 'output' value contains unknown token 'build.version'
    [compc]
    [compc] Use 'compc -help' for information about using the command line.
BUILD FAILED
C:\projects\FlexUnit4CIListener\build.xml:50: compc task failed
        at flex.ant.FlexTask.executeInProcess(FlexTask.java:299)
        at flex.ant.FlexTask.execute(FlexTask.java:225)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.Main.runBuild(Main.java:809)
        at org.apache.tools.ant.Main.startAnt(Main.java:217)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Total time: 1 second
build.version, build.number & build.sdk are properties that are not being set. I would assume that they should be set internally somehow. However, if I manually set them via -D switches (with arbitrary values) I get the following:
>ant -v clean package -Dbuild.version=1.2.3.4 -Dbuild.number=666 -Dbuild.sdk=4.1
function(){return A.apply(null,[this].concat($A(arguments)))}
Apache Ant(TM) version 1.8.2 compiled on December 20 2010
Trying the default build file: build.xml
Buildfile: C:\projects\FlexUnit4CIListener\build.xml
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
parsing buildfile C:\projects\FlexUnit4CIListener\build.xml with URI = file:/C:/projects/FlexUnit4CIListener/build.xml
Project base dir set to: C:\projects\FlexUnit4CIListener
parsing buildfile jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml with URI = jar:file:/C:/apacheAnt/lib/ant.jar!/org/apache/tools/ant/antlib.xml from a zip file
Importing file C:\projects\utils.xml from C:\projects\FlexUnit4CIListener\build.xml
Overriding previous definition of reference to ant.projectHelper
parsing buildfile C:\projects\utils.xml with URI = file:/C:/projects/utils.xml
[macrodef] creating macro gpg
[macrodef] creating macro sonatype-bundle
Overriding previous definition of reference to ant.projectHelper
[property] Loading Environment env.
Build sequence for target(s) `clean' is [clean]
Complete build sequence is [clean, init, compile, report, package, deploy, ]
clean:
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\bin
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\docs
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target\sonatype
   [delete] Deleting directory C:\projects\FlexUnit4CIListener\target
   [delete] Deleting C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
Build sequence for target(s) `package' is [init, compile, report, package]
Complete build sequence is [init, compile, report, package, clean, deploy, ]
init:
    [mkdir] Skipping C:\projects\FlexUnit4CIListener\libs because it already exists.
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\sonatype
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4CIListener\target\docs
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\libs
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4CIListener\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
compile:
    [compc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [compc] C:\projects\FlexUnit4CIListener\target\bin\flexunit-cilistener-1.2.3.4-666-4.1.swc (11773 bytes)
report:
Skipped because property 'build.report' not set.
package:
     [copy] Copying 1 file to C:\projects\FlexUnit4CIListener\target
     [copy] Copying C:\projects\FlexUnit4CIListener\target\bin\flexunit-cilistener-1.2.3.4-666-4.1.swc to C:\projects\FlexUnit4CIListener\target\flexunit-cilistener-1.2.3.4-666-4.1.swc
BUILD SUCCESSFUL
Total time: 4 seconds
I can see where the previous 3 properties are being used in the swc output file name, but now there is a build.report property that is not being set. How do I know which properties need to be set, and what to set them to?

I was using the 4.5.1 flex SDK but there seemed to be other issues so I just used the link directly from the Ant Task Setup page (instead of using the newest SDK). Upon following your instructions to ant build from the root directory, everything seemed to work correctly with a few exceptions. Below is the last part of the output from the build.
function(){return A.apply(null,[this].concat($A(arguments)))}
test:
Detected Java version: 1.7 in: C:\Program Files\Java\jdk1.7.0\jre
Detected OS: Windows XP
Project base dir set to: C:\projects\FlexUnit4Test
      [ant] calling target(s) [test] in build file C:\projects\FlexUnit4Test\build.xml
parsing buildfile C:\projects\FlexUnit4Test\build.xml with URI = file:/C:/projects/FlexUnit4Test/build.xml
Project base dir set to: C:\projects\FlexUnit4Test
[property] Loading Environment env.
Override ignored for property "FLEX_HOME"
Property "env.FLEX_COVER_VIEWER" has not been set
[macrodef] creating macro compile-runner
[macrodef] creating macro execute-tests
[macrodef] creating macro execute-tests-using-flexcover
[macrodef] creating macro generate-html-report
      [ant] Entering C:\projects\FlexUnit4Test\build.xml...
Build sequence for target(s) `test' is [init, test-only, test-and-instrument, test]
Complete build sequence is [init, test-only, test-and-instrument, test, clean, ]
init:
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\bin
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\xunit\flex
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\xunit\as3
    [mkdir] Created dir: C:\projects\FlexUnit4Test\target\report\flexcover
     [copy] Copying 5 files to C:\projects\FlexUnit4Test\libs
     [copy] Copying C:\projects\FlexUnit4CIListener\target\flexunit-cilistener-4.1.0-x-y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-cilistener-4.1.0-x-y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4FluintExtensions\target\fluint-extensions-4.1.0-x-y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\fluint-extensions-4.1.0-x-y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-as3_y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-4.1.0-x-as3_y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4\target\flexunit-4.1.0-x-flex_y.y.y.y.swc to C:\projects\FlexUnit4Test\libs\flexunit-4.1.0-x-flex_y.y.y.y.swc
     [copy] Copying C:\projects\FlexUnit4FlexCoverListener\target\flexunit-flexcoverlistener-4.1.0-x-y.y.y.y. swc to C:\projects\FlexUnit4Test\libs\flexunit-flexcoverlistener-4.1.0-x-y.y.y.y.swc
     [copy] Copying 1 file to C:\projects\FlexUnit4Test\libs\build
     [copy] Copying C:\projects\FlexUnit4AntTasks\target\flexUnitTasks-4.1.0-x.jar to C:\projects\FlexUnit4Test\libs\build\flexUnitTasks-4.1.0-x.jar
test-only:
     [echo] Testing FlexUnit Flex build...
    [mxmlc] Loading configuration file C:\flexunit\frameworks\flex-config.xml
    [mxmlc] C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf (924564 bytes)
[flexunit] Validating task attributes ...
[flexunit] Generating default values ...
[flexunit] Using default working dir [C:\projects\FlexUnit4Test]
[flexunit] Using the following settings for the test run:
[flexunit] FLEX_HOME: [C:\flexunit]
[flexunit] haltonfailure: [false]
[flexunit] headless: [false]
[flexunit] display: [99]
[flexunit] localTrusted: [true]
[flexunit] player: [flash]
[flexunit] port: [1024]
[flexunit] swf: [C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf]
[flexunit] timeout: [60000ms]
[flexunit] toDir: [C:\projects\FlexUnit4Test\target\report\xunit\flex]
[flexunit] Setting up server process ...
[flexunit] Starting server ...
[flexunit] Entry [C:\projects\FlexUnit4Test\target\bin] already available in local trust file at [C:\Documents and Settings\Administrator\Application Data\Macromedia\Flash Player\#Security\FlashPlayerTrust\flexUnit.cfg].
[flexunit] Executing 'rundll32' with arguments:
[flexunit] 'url.dll,FileProtocolHandler'
[flexunit] 'C:\projects\FlexUnit4Test\target\bin\TestRunner-flex.swf'
[flexunit]
[flexunit] The ' characters around the executable and arguments are
[flexunit] not part of the command.
[flexunit]
[flexunit] Opening server socket on port [1024].
[flexunit] Waiting for client connection ...
[flexunit]
[flexunit] Stopping server ...
[flexunit] End of test data reached, sending acknowledgement to player ...
[flexunit] Closing client connection ...
[flexunit] Closing server on port [1024] ...
      [ant] Exiting C:\projects\FlexUnit4Test\build.xml.
After this part of the log I get the following:
function(){return A.apply(null,[this].concat($A(arguments)))}
BUILD FAILED
C:\projects\build.xml:103: The following error occurred while executing this line:
C:\projects\FlexUnit4Test\build.xml:180: The following error occurred while executing this line:
C:\projects\FlexUnit4Test\build.xml:62: java.util.concurrent.ExecutionException: Socket timeout waiting for flexunit report
        at java.util.concurrent.FutureTask$Sync.innerGet(FutureTask.java:252)
        at java.util.concurrent.FutureTask.get(FutureTask.java:111)
        at org.flexunit.ant.tasks.TestRun.run(Unknown Source)
        at org.flexunit.ant.tasks.FlexUnitTask.execute(Unknown Source)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:68)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.taskdefs.MacroInstance.execute(MacroInstance.java:398)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.helper.SingleCheckExecutor.executeTargets(SingleCheckExecutor.java:3 8)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.taskdefs.Ant.execute(Ant.java:442)
        at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:291)
        at sun.reflect.GeneratedMethodAccessor4.invoke(Unknown Source)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:601)
        at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
        at org.apache.tools.ant.Task.perform(Task.java:348)
        at org.apache.tools.ant.Target.execute(Target.java:390)
        at org.apache.tools.ant.Target.performTasks(Target.java:411)
        at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1399)
        at org.apache.tools.ant.Project.executeTarget(Project.java:1368)
        at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
        at org.apache.tools.ant.Project.executeTargets(Project.java:1251)
        at org.apache.tools.ant.Main.runBuild(Main.java:809)
        at org.apache.tools.ant.Main.startAnt(Main.java:217)
        at org.apache.tools.ant.launch.Launcher.run(Launcher.java:280)
        at org.apache.tools.ant.launch.Launcher.main(Launcher.java:109)
Caused by: Socket timeout waiting for flexunit report
        at org.flexunit.ant.FlexUnitSocketServer.start(Unknown Source)
        at org.flexunit.ant.FlexUnitSocketThread.call(Unknown Source)
        at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
        at java.util.concurrent.FutureTask.run(FutureTask.java:166)
        at java.util.concurrent.ThreadPoolExecutor.runWorker(ThreadPoolExecutor.java:1110)
        at java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:603)
        at java.lang.Thread.run(Thread.java:722)
Caused by: java.net.SocketTimeoutException: Accept timed out
        at java.net.TwoStacksPlainSocketImpl.socketAccept(Native Method)
        at java.net.AbstractPlainSocketImpl.accept(AbstractPlainSocketImpl.java:396)
        at java.net.PlainSocketImpl.accept(PlainSocketImpl.java:183)
        at java.net.ServerSocket.implAccept(ServerSocket.java:522)
        at java.net.ServerSocket.accept(ServerSocket.java:490)
        at org.flexunit.ant.FlexUnitSocketServer.openClientSocket(Unknown Source)
        ... 7 more
Total time: 1 minute 38 seconds
So everything seems to be building correctly now, but not executing correctly. Also, there are still a number of properties that are not being set:
function(){return A.apply(null,[this].concat($A(arguments)))}
report:
Skipped because property 'build.report' not set.
instrument-compile:
Skipped because property 'build.instrument' not set.
package-instrument:
Skipped because property 'build.instrument' not set.
pmdReport:
Skipped because property 'build.pmd' not set.
Where should these values be set and what are appropriate values? What could be causing the socket timeout and what exactly is it waiting for or attempting to accomplish with the sockets?
The end goal is to be able to use the flex SDK, flexunit and ANT on a linux server to automate my build/test process. I am currently just trying to get ANT to work with the flex SDK and flexunit on a windows XP box so I can see what the output should be and how the whole system works before trying to inject it into my CI system.

Display build number in application.

I found a few old threads about this with no solution, but nothing recent. Does anyone know if there is a simple method to display the version number of an executable built with the application builder. I have the build set to auto increment this, and would like to be able to see that build number in the installed application.
For clarities sake I mean the build number of the exe, not the build number of the subsiquent installer I create.
At the moment it seems I must manually assign a version/build number and make it visible in the application. For this I use a seperate 'about' vi available from the main routine.
All suggestions welcome.
I'm using LabVIEW 8.6.1 on Win XP
Best Regards,
Bandit.
Solved!
Go to Solution.

I'm not sure about this, but what if you would try using a Property Node (Programming -> Application Control palette) with a property of Application -> Version Number.
If I put it in a block diagram of an ordinary VI it returns the current version of my LabVIEW program. But if you put it in an EXE and if you would set up the version for that EXE, maybe it would return that value instead.
Have never tried this, maybe you could give it a chance.
While evaluating my code please have in mind that I am a LV novice. Therefore sometimes my code might violate some coding rules that I have to learn about myself. But how else could I do that...
Chart zoom with "Mouse Over" effect

Xcelsius 2008 Version/Build Number not Changing

Similar Messages

Maybe you are looking for