Xcelsius 2008

I have a dashbord with local scenario button. After saving and loading a few what if scenarios and swaping between them with the load button, the dashboard goes crazy and starts mixing data from different scenarios. Any idea why this is happening? Please help!!

Dear Amit,
Many thanks for your answer, really an eye-opener for me.
I tried and my setting was 100KB... I did a trial creating many scenarios and monitoring the used flash cache until I reached 100KB, the I was asked if I wanted to increase or not (I know I can do it manually, I just wanted to see what happened at reaching maximum) If I say yes the new scenario is loaded, If I say no the scenario is not even saved, which makes sense. My issue is that sometimes a local scenario which was already saved before (because there was enough memory) does not load properly and starts mixing data with other scenarios.... Is it posible that the flash cache is being also used by a different program and takes part of the memory? the Adobe web page says this is not a problem. Any other thing you may think of?
I will increase anyway to 10MB just to avoid any problem and keep runing teset.
Many Thanks!

Similar Messages

  • Error to install Xcelsius 2008 on Windows vista. Error 1935.

    I have a big problem, I need install Xcelsius 2008 on Windows vista, but when I install the software apper the nex message:
    Error 1935 Error al instalar el ensamblado.
    "Microsoft.VC80.ATL,type ="Win32",version= "8.0.50727.762",pubicKeyToken="1fc8b3b9a1e18e3b",processorArchitecture="x86"". Consulte Ayude y soporte tecnico para obtener mas informacion.

    From a brief Google search, I determined this error message is from Vista. It is not being produced by Xcelsius. You will need to do your own search and determine what is causing Vista to report this error. You can also try installing using instructions for Xcelsius installation on Vista posted elsewhere in these forums.

  • Not able to see Data in Xcelsius 2008

    Hi everyone,
    My question is I am not able to see data in Xcelsius spreadsheet although I am able to connect to SAP BW and also able to see and select query but when I select Cross Tab Data in output Values it is not displaying in Xcelsius spreadsheet
    System Info
    Xcelsius 2008 Enterprise Trial Version SP 3.0
    SAP BW 7.1 SP 6 ABAP and JAVA
    Any help would be appreciated

    Hi Rashid,
    When you are using the BW conenction in Xcelsius you will not see any data in the spreadsheet at design time or at preview time.
    To see the data you need to go SAP > Publish, then SAP > Launch to test the dashboard in the NetWeaver Portal as that is the only place where the data can be viewed.
    Regards
    Matt

  • Updating data in Xcelsius 2008 Export from Excel Spreadsheet

    Xcelsius 2008 newbie question....
    I have created a Xcelsius export (.swf) that display my data. However it appears the data is static after exporting.
    I am at a loss as to how you force it to update/refresh using the connections used in the excel.
    Am I missing something? I cannot find a straight answer, do need LiveOffice?
    How do I have an (.swf) export file that refreshes data itself????

    The easiest way to get data to update in your swf is to create a connection in the Data Manager.  After the connection is setup you can add a connection refresh button to allow the swf viewer to trigger that connection.
    To get data to refresh automatically, you can setup the connection to trigger or update on interval.
    For more information you can check out the learning center:
    http://resources.businessobjects.com/support/cx/samples/learning/ondemand.asp

  • XCelsius 2008 is not backward compatible with ver 4.5

    Post Author: Joseph
    CA Forum: Xcelsius and Live Office
    I tried opening a project that was done with ver 4.5 but it just said that "Crystal Xcelsius is unable to load this file. This file may be corrupt or may have features that cannot be supported by this version of Crystal Xcelsius." So i guess I probably have to recreate the project in the 2008 version to take advantage of the new features available. So I imported the excel datasheet used in the old project to a new project in Xcelsius 2008 and tried recreating the objects from scratch. I had started with an accordion menu and two list boxes and then I decided to export to swf to test. However, the result was disappointing. I could only see the two list boxes but not the accordion menu. There was a message saying "Initializing..." that stayed. Does this mean I have to recreate the excel data from scratch as well?

    Post Author: abrat
    CA Forum: Xcelsius and Live Office
    X2008 is backward compatible with CX4.5.  But Jim is correct. There is a bug in X2008 which prevents it from opening some 4.5 models by double-clicking on the filename.  They can be opened from the File > Open menu.  This only affects opening the model.Due to the many changes between CX4.5 and X2008, the migration of old CX4.5 models is not clean.  Differences will be seen.  Most are cosmetic affecting only the look of the model.  But some tidy up, color changes and re-alignment work must be done.   There was no way to gain the benefits of X2008 and still keep CX4.5 models unchanged.Andy  

  • SAP Authentication issue in Xcelsius 2008 SP4

    Ingo Can you help me?
    Xcelsius 2008 SP4 Failed to Open/Save from BusinessObjects Enterprise and throws an error Failed While Trying to Logon User "0000" RFC error: "LOGON_DATA_INCOMPLETE" when using SAP Authentication.
    It works perfect with Enterprise.
    Recently we have upgraded from Xcelsius 2008 SP3 FP 3.5 to Xcelsius 2008 SP4. It also displays the password without encrypting.
    BOE 3.1 Sp3
    Integration Kit SP3Fix Pack 3.2
    SAP GUI 720
    Xcelsius 2008 SP4
    It was working good with SAP Authentication when using Xcelsius 2008 SP3 FP3.5
    Thanks
    Dais

    Hi,
    As a starting point, i would strongly recommend you standardise all your component versions.
    from what i can see, you've just asserted that Server, Integration Kit, and Client  are all on different Fix levels..
    that's not a nice baseline on which to investigate!  
    Also, patching would also include importing the correct SAP Transports into your BW. (they change almost every FP)
    Regards,
    H
    Edited by: Henry Banks on Feb 10, 2012 4:00 PM

  • How can i add a new regional map component in xcelsius 2008 ?

    hi,
    we need to add a new regional map component in xcelsius 2008 , how can i do it ?
    Where do I find any examples ?
    Thanks

    You might want to check out the Any Map Component found on the Marketplace: http://www.ondemand.com/information/xcelsius.asp.  Then click on Visit the Marketplace to view all add-ons.
    This is one of the cool components that the users created using the Xcelsius 2008 Component SDK.

  • Error while installing Xcelsius 2008

    Hi,
    We are getting error while installing Xcelsius 2008  version 5.3.....
    "The upgrade patch cannot be installed by windows installer service because the program to be upgraded may be missing, or the upgrade patch may update a different version of the program. Verify that the program to be upgraded exists on your computer and that you have the correct upgrade patch"
    Kindly suggest how to install the Xcelsius latest verion.
    With Regards,
    Pearl

    Hi Pearl,
    Sorry if you've already done this, but have you installed Xcelsius 2008 SP3 first?  It sounds like you are trying to install a fix pack without first installing Xcelsius 2008.
    The downloads are all available from the [downloads service market place|http://www.sdn.sap.com/irj/boc/] (as per the stickied thread)
    If you choose Service Pack as the software type it will allow for download of the SP3 full install.
    OR
    Could it be this issue [Xcelsius FP3.5 error installing Excel2010; with solution from F. Kooij if you are referring to the latest fix pack 3.5 with Office 2010?
    Regards,
    Paul
    Edited by: zygorf on May 24, 2011 12:53 PM

  • Xcelsius 2008 on top of SAP BPC

    Hi Experts,
    I am trying to use Xcelsius 2008 on top of SAP BPC.
    I want following functionality in my dashboard:
    1. There is a drop down in the dashboard for Year-Month selection.
    2. Based on that selection, the BPC query to be refreshed for the selected month and my dashboard will show data for the selected month. While integrating with WebI using LiveOffice, we used to do this by binding the prompt to a cell in excel and selecting on demand refresh option. Can we do the similar thing while integrating with BPC ?
    3. Can we create multiple BPC reports in the same excel file to build the excel model for my dashboard ?
    Can these requirements be achieved by using Xcelsius on top of BPC using EPMConnector.xlx ?
    Many thanks,
    PASG

    Hi Sanjay,
    You need to use different operation types of the EPM Connector for this.
    Have a look at this how to guide:
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5
    http://wiki.sdn.sap.com/wiki/display/BPX/Enterprise+Performance+Management+%28EPM%29+How-to+Guides
    HTH,
    John

  • Consuming a webservice of MII in Xcelsius 2008

    Hello Everyone !
    I have created a webservice in MII 12.1. I tested it in SoapUI. It is working fine.
    I created a separate webservice using SAP. Tried to consume in Xcelsius 2008. It is also working fine.
    But, the webservice created in MII 12.1 which I try to consume in Xcelsius 2008 is giving me error as "Unable to load URL".
    What can be the possible measures to overcome this issue ?
    Regards,
    Vaibhav Singhania

    Hi,
    Try to call MII transaction in URL with MII user id and password.if it is working fine then try to use that in Xcelsius 2008.We have done this procedure.
    Thanks,
    Ramesh

  • 'Error applying transforms' when trying to install Xcelsius 2008 fp3.2

    Hello
    I've just tried to install Xcelsius 2008 fp3.2 (I am currently on Xcelsius 2008 sp3). I did read the installation notes, and I wonder if the problem I had is related to the fact that I am not logged in as administrator (I'm on XP).
    The package extracted and as the installer ran I got the message:
    'Error applying transforms. Verify that the specified transform oaths are valid'.
    Thanks
    Phil

    Hi Phil,
    Can be...
    To resolve this error, copy all files from the disc to a local computer location (for example, the desktop). Install Crystal Xcelsius from the setup.exe file at that location.
    Hope this helps.
    Kind Regards,
    Marcio

  • Xcelsius 2008 SP4 won't work on Win 7 but does on XP ?

    Hi I posted this a few weeks ago but no one has replied thought I'd try again it is really anoying I have to type everything in word and cut and paste into Xcelsius
    Touching any key on keyboard locks up Xcelsius Mouse OK SP4  
    Posted: Feb 1, 2012 2:37 AM     Edit          Reply 
    Just wondering if anyone has had any issues with xcelsius and using the keyboard. I have now tried the Enterprise Edition Xcelsius 2008 SP4 on 3 x Windows 7 machines (and the Xcelsius SP3 with hot fix 3.3 on 2 windows 7 machines) and if I open a new project drag a pie chart onto the canvas (or anything) and try to replace the heading pie chart with "MyChart" as soon as I hit the M the software locks up and I get the following message.
    Xcelsius has stopped working
    Windows can check online for a solution to the problem
    Check online for a solution to the problem
    Close the program
    Problem signature:
    Problem Event Name: APPCRASH
    Application Name: Xcelsius.exe
    Application Version: 5.4.0.0
    Application Timestamp: 4db76bf5
    Fault Module Name: MSVCR80.dll
    Fault Module Version: 8.0.50727.6195
    Fault Module Timestamp: 4dcddbf3
    Exception Code: c0000005
    Exception Offset: 0001568f
    OS Version: 6.1.7600.2.0.0.256.48
    Locale ID: 3081
    Additional Information 1: 0a9e
    Additional Information 2: 0a9e372d3b4ad19135b953a78882e789
    Additional Information 3: 0a9e
    Additional Information 4: 0a9e372d3b4ad19135b953a78882e789
    Read our privacy statement online:
    http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
    If the online privacy statement is not available, please read our privacy statement offline:
    C:\Windows\system32\en-US\erofflps.txt
    The strange thing is that if I write MyChart in a cell in the excel sheet and copy and paste it over Pie Chart it works fine as soon as I hit a key (even the backspace) I lock up the program. We tried on a clean image Windows 7 machine that IT hadnu2019t given out yet and same thing happened then we loaded it on an old XP machine and it worked!
    I Tried changing the compatibility to Run on XP SP3 but that didnu2019t help and turning on run as Administrator made no differance
    . Any ideas?
    This is the same for changing the timing for the xml maps thatu2019s where I first noticed the keyboard locking up the software, you can change the time with the 2 arrows via the mouse but if you highlight 5 and then hit the 6 key its the same error as above
    Extra weird just opened it up and went to the help thought Iu2019d type in u201Ckeyboard locks upu201D and guess what as soon as I hit the K, same error
    All our images have Office 2007, Dasault Draft site and a few other bits of software I was running 4.5 Xcelsius and that was OK
    Any ideas would be most helpful.
    Darren

    Hello David
    Thanks for replying this is really bugging me. Sorry I've been a while replying I've been overseas on a course last week and didn't have work email access.
    Firstly the machines that I have tried it on are HP desktops about 1-2 years old with USB keyboards
    I tried the on screen keyboard and it locked up as soon as I clicked on a character whilst trying to rename a pie chart, this was the same for a remote net support session, and a remote RDP login to my machine by our IT department.
    Our IT guy said the keyboard drivers were current but I may just try and do an upgrade and reply a bit later on that as well.
    Does not happen on any other software on this machine.
    I'm checking for Flash upgrades but we currently have 11.1.102.55 and the newest is 11.1.102.62 so will load that and reply later also.
    Do you think it possible to download a corrupted version of Xcelsius the stupid thing about that idea is that I downloaded SP4 but if I load SP3 hotfix 3.3 that also locks up and I have that on an official DVD from Rockwell Automation as Xcelsius comes with their Factory Talk Vantage Point software as a dashboard builder.
    Thanks again Darren

  • Error Opening Adobe PDF created with Xcelsius 2008

    I am using an SAP Product - Xcelsius 2008 to create a dashboard that I exported to PDF.  The document essentially contains a Flash SWF file embedded in the PDF.  I can open it up fine with my Adobe Acrobat 9 Pro.  Some of my colleagues can open it up using Adobe Reader.  Many recipients who have a older version of Adobe Acrobat get an error stating:  "This file appears to use a new format that this version of Acrobat does not support.  It may not open or display correctly.  Adobe recommends that you upgrade to the latest version o four Acrobat products.  Please visit our product site at http://www.adobe.com/acrobat."  My question is, is there a way to resave the PDF file as an older, more compatible version for people who have Acrobat 8 or earlier versions?
    Troy

    Version 8 should work, but not earlier, since they did not have an internal flash player.

  • Xcelsius 2008 Engage Won't Install in Windows 7

    The installation of Xcelsius 2008 Engage completes but the program cannot be used at all because the license key is stated to be missing or invalid.
    This is a common problem on other systems but it can be worked around in various ways. However the workarounds fail in Windows 7.
    The required registry entries that need to be edited are not present in Windows 7. Running as administrator does not solve the problem either.
    It seems Xcelsius 2008 can only be used on Windows 7 by running under an XP virtual machine.
    Does anyone have a way to get Xcelsius running natively on Windows 7?
    My Windows 7 system is the 64-bit release candidate. Xcelsius 4.5 runs on this but only when run as administrator and in XP SP3 compatibility mode with desktop composition and visual themes disabled.

    Download the offline installer from http://helpx.adobe.com/content/help/en/flash-player/kb/installation-problems-flash-player- windows.html#main-pars_header and save it to disk, then close all browser windows and run the downloaded installer.
    If you still have problems, please post the contents of the FlashInstall.log file in
    C:\Windows\system32\Macromed\Flash
    C:\Windows\syswow64\Macromed\Flash
    [topic moved to Flash Player forum]

  • Can't get Preview to work in Xcelsius 2008

    My system crashes everytime I try to reun Preview in Xcelsius 2008.  I am running Windows XP and Office 2007.  I have installed all critical updates.  I have uninstalled and reinstalled Adobe Flashpoint.  When I hit Preview the system starts to generate the SWF and then I get the very polite message - Xcelsius.exe has encountered a problem and needs to close.  Meanwhile the SWF is still trying to generate.  When I "click here" to get more information I get:
    AppName:xcelsius.exe
    AppVer. 1.1.0.3
    ModName: msvcr80.dll
    ModVer: 8.0.50727.1433
    Offset:0008aa0
    If I hit debug my computer goes into never never land and I have to reboot.  If I hit close then Xcelsius closes but then  Excel connection does not.  I either get the message "Problem Assesing Excel:Exiting" or "Excel cannot complete this task with available resources".  If I go to the task manager and exit Excel manually then I can reopen Xcelsius but I still can't run it. 
    The technical details report for the above:
        <MATCHING_FILE NAME="AccordionExtDll.dll" SIZE="66288" CHECKSUM="0x77E64A2C" BIN_FILE_VERSION="1.0.0.1" BIN_PRODUCT_VERSION="1.0.0.1" PRODUCT_VERSION="1, 0, 0, 1" FILE_DESCRIPTION="AccordionExtDll DLL" PRODUCT_NAME="AccordionExtDll Dynamic Link Library" FILE_VERSION="1, 0, 0, 1" ORIGINAL_FILENAME="AccordionExtDll.DLL" INTERNAL_NAME="AccordionExtDll" LEGAL_COPYRIGHT="Copyright (C) 2006" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x107D5" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.0.1" UPTO_BIN_PRODUCT_VERSION="1.0.0.1" LINK_DATE="03/02/2008 00:34:45" UPTO_LINK_DATE="03/02/2008 00:34:45" VER_LANGUAGE="English (United States) " />
        <MATCHING_FILE NAME="BCGCBPRO910u80.dll" SIZE="3470072" CHECKSUM="0xB581EEB7" BIN_FILE_VERSION="9.10.0.0" BIN_PRODUCT_VERSION="9.10.0.0" PRODUCT_VERSION="9, 10, 0, 0" FILE_DESCRIPTION="BCGControlBar Professional DLL" COMPANY_NAME="BCGSoft Ltd" PRODUCT_NAME="BCGControlBar Professional Dynamic Link Library" FILE_VERSION="9, 10, 0, 0" ORIGINAL_FILENAME="BCGCBPro.DLL" INTERNAL_NAME="BCGCBPro" LEGAL_COPYRIGHT="Copyright (c) 2000-2006 BCGSoft Ltd. All rights reserved" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x35561A" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="9.10.0.0" UPTO_BIN_PRODUCT_VERSION="9.10.0.0" LINK_DATE="03/02/2008 00:11:12" UPTO_LINK_DATE="03/02/2008 00:11:12" VER_LANGUAGE="English (United States) " />
        <MATCHING_FILE NAME="icudt38.dll" SIZE="11195120" CHECKSUM="0xE71DAD4D" BIN_FILE_VERSION="3.8.0.0" BIN_PRODUCT_VERSION="3.8.0.0" PRODUCT_VERSION="3, 8, 0, 0" FILE_DESCRIPTION="ICU Data DLL" COMPANY_NAME="IBM Corporation and others" PRODUCT_NAME="International Components for Unicode" FILE_VERSION="3, 8, 0, 0" ORIGINAL_FILENAME="icudt38.dll" LEGAL_COPYRIGHT=" Copyright (C) 2007, International Business Machines Corporation and others. All Rights Reserved. " VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xABBCBD" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="3.8.0.0" UPTO_BIN_PRODUCT_VERSION="3.8.0.0" LINK_DATE="03/02/2008 00:16:54" UPTO_LINK_DATE="03/02/2008 00:16:54" VER_LANGUAGE="Language Neutral " />
        <MATCHING_FILE NAME="icuin38.dll" SIZE="914160" CHECKSUM="0x6C97590E" BIN_FILE_VERSION="3.8.0.0" BIN_PRODUCT_VERSION="3.8.0.0" PRODUCT_VERSION="3, 8, 0, 0" FILE_DESCRIPTION="IBM ICU I18N DLL" COMPANY_NAME="IBM Corporation and others" PRODUCT_NAME="International Components for Unicode" FILE_VERSION="3, 8, 0, 0" ORIGINAL_FILENAME="icuin38.dll" LEGAL_COPYRIGHT=" Copyright (C) 2007, International Business Machines Corporation and others. All Rights Reserved. " VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xEEF22" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="3.8.0.0" UPTO_BIN_PRODUCT_VERSION="3.8.0.0" LINK_DATE="03/02/2008 00:14:13" UPTO_LINK_DATE="03/02/2008 00:14:13" VER_LANGUAGE="Language Neutral " />
        <MATCHING_FILE NAME="icuuc38.dll" SIZE="922352" CHECKSUM="0xBDD34113" BIN_FILE_VERSION="3.8.0.0" BIN_PRODUCT_VERSION="3.8.0.0" PRODUCT_VERSION="3, 8, 0, 0" FILE_DESCRIPTION="IBM ICU Common DLL" COMPANY_NAME="IBM Corporation and others" PRODUCT_NAME="International Components for Unicode" FILE_VERSION="3, 8, 0, 0" ORIGINAL_FILENAME="icuuc38.dll" LEGAL_COPYRIGHT=" Copyright (C) 2007, International Business Machines Corporation and others. All Rights Reserved. " VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xEE322" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="3.8.0.0" UPTO_BIN_PRODUCT_VERSION="3.8.0.0" LINK_DATE="03/02/2008 00:12:48" UPTO_LINK_DATE="03/02/2008 00:12:48" VER_LANGUAGE="Language Neutral " />
        <MATCHING_FILE NAME="keydecoder.dll" SIZE="2499352" CHECKSUM="0x2D11A7B2" BIN_FILE_VERSION="12.0.0.3" BIN_PRODUCT_VERSION="12.0.0.3" PRODUCT_VERSION="12.0.0.3" FILE_DESCRIPTION="Business Objects keycode decoder" COMPANY_NAME="Business Objects" PRODUCT_NAME="Business Objects keycode decoder" FILE_VERSION="12.0.0.3" ORIGINAL_FILENAME="keydecoder.dll" LEGAL_COPYRIGHT="Copyright 1999-2008 Business Objects" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x27205A" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="12.0.0.3" UPTO_BIN_PRODUCT_VERSION="12.0.0.3" LINK_DATE="02/26/2008 23:38:39" UPTO_LINK_DATE="02/26/2008 23:38:39" VER_LANGUAGE="English (United States) " />
        <MATCHING_FILE NAME="TreeBtnExtDll.dll" SIZE="86768" CHECKSUM="0x1F4B3404" BIN_FILE_VERSION="1.0.0.1" BIN_PRODUCT_VERSION="1.0.0.1" PRODUCT_VERSION="1, 0, 0, 1" FILE_DESCRIPTION="TreeBtnExtDll DLL" PRODUCT_NAME="TreeBtnExtDll Dynamic Link Library" FILE_VERSION="1, 0, 0, 1" ORIGINAL_FILENAME="TreeBtnExtDll.DLL" INTERNAL_NAME="TreeBtnExtDll" LEGAL_COPYRIGHT="Copyright (C) 2006" VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x1C89C" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.0.0.1" UPTO_BIN_PRODUCT_VERSION="1.0.0.1" LINK_DATE="03/02/2008 00:34:47" UPTO_LINK_DATE="03/02/2008 00:34:47" VER_LANGUAGE="English (United States) " />
        <MATCHING_FILE NAME="Xcelsius.exe" SIZE="3052264" CHECKSUM="0x4EA35699" BIN_FILE_VERSION="1.1.0.3" BIN_PRODUCT_VERSION="5.0.0.99" PRODUCT_VERSION="5.0.0.99" FILE_DESCRIPTION="Xcelsius" COMPANY_NAME="Business Objects" PRODUCT_NAME="Xcelsius" FILE_VERSION="1.0.0.1" ORIGINAL_FILENAME="Xcelsius.exe" INTERNAL_NAME="Xcelsius.exe" LEGAL_COPYRIGHT="Business Objects.  All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x2EE5F4" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.1.0.3" UPTO_BIN_PRODUCT_VERSION="5.0.0.99" LINK_DATE="03/02/2008 00:41:58" UPTO_LINK_DATE="03/02/2008 00:41:58" VER_LANGUAGE="Language Neutral " />
        <MATCHING_FILE NAME="Xcelsius_en.dll" SIZE="353008" CHECKSUM="0x4D1B276" BIN_FILE_VERSION="1.1.0.3" BIN_PRODUCT_VERSION="5.0.0.99" PRODUCT_VERSION="5.0.0.99" FILE_DESCRIPTION="Xcelsius" COMPANY_NAME="Business Objects" PRODUCT_NAME="Xcelsius" FILE_VERSION="1.0.0.1" ORIGINAL_FILENAME="Xcelsius.exe" INTERNAL_NAME="Xcelsius.exe" LEGAL_COPYRIGHT="Business Objects.  All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x4" VERFILETYPE="0x1" MODULE_TYPE="WIN32" PE_CHECKSUM="0x580AC" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="1.1.0.3" UPTO_BIN_PRODUCT_VERSION="5.0.0.99" LINK_DATE="03/02/2008 00:42:05" UPTO_LINK_DATE="03/02/2008 00:42:05" VER_LANGUAGE="Language Neutral " />
        <MATCHING_FILE NAME="msvcr80.dll" SIZE="635904" CHECKSUM="0x47E3D63C" BIN_FILE_VERSION="8.0.50727.1433" BIN_PRODUCT_VERSION="8.0.50727.1433" PRODUCT_VERSION="8.00.50727.1433" FILE_DESCRIPTION="Microsoft® C Runtime Library" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Visual Studio® 2005" FILE_VERSION="8.00.50727.1433" ORIGINAL_FILENAME="MSVCR80.DLL" INTERNAL_NAME="MSVCR80.DLL" LEGAL_COPYRIGHT="© Microsoft Corporation.  All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0x9DFC9" LINKER_VERSION="0x0" UPTO_BIN_FILE_VERSION="8.0.50727.1433" UPTO_BIN_PRODUCT_VERSION="8.0.50727.1433" LINK_DATE="10/24/2007 03:02:06" UPTO_LINK_DATE="10/24/2007 03:02:06" VER_LANGUAGE="English (United States) " />
        <MATCHING_FILE NAME="kernel32.dll" SIZE="989696" CHECKSUM="0x7D737C09" BIN_FILE_VERSION="5.1.2600.5512" BIN_PRODUCT_VERSION="5.1.2600.5512" PRODUCT_VERSION="5.1.2600.5512" FILE_DESCRIPTION="Windows NT BASE API Client DLL" COMPANY_NAME="Microsoft Corporation" PRODUCT_NAME="Microsoft® Windows® Operating System" FILE_VERSION="5.1.2600.5512 (xpsp.080413-2111)" ORIGINAL_FILENAME="kernel32" INTERNAL_NAME="kernel32" LEGAL_COPYRIGHT="© Microsoft Corporation. All rights reserved." VERFILEDATEHI="0x0" VERFILEDATELO="0x0" VERFILEOS="0x40004" VERFILETYPE="0x2" MODULE_TYPE="WIN32" PE_CHECKSUM="0xF44A2" LINKER_VERSION="0x50001" UPTO_BIN_FILE_VERSION="5.1.2600.5512" UPTO_BIN_PRODUCT_VERSION="5.1.2600.5512" LINK_DATE="04/14/2008 00:11:24" UPTO_LINK_DATE="04/14/2008 00:11:24" VER_LANGUAGE="English (United States) " />
    </EXE>
    </DATABASE>

    Okay I've tried a couple of things since I posted this original question.  Starting with once again uninstalling and reinstalling Xcelsius and Flashpoint.  Based on your question I tried all the export options - it crashes everytime.  The problem must be in generating the SWF.  If I start with the blank page and blank excel it'll let me go to preview.  If I open one of your example files it'll work.  If I open any of the files I built in 4.5 it crashes.  If I just import in one of my excel files and leave the canvas blank it crashes.  Kind of suggests it's an excel problem or an interface problem.  I do notice it doesn't matter if I'm importing an 2003 .xls file, a 2007 compatible .xls file, or a 2007 .xlsx I get the same incompatibly box before it'll import.
    The spreadsheet I'm wokring off from works fine in 4.5 Professional
    Edited by: Maureen LaComb on Jul 24, 2008 10:56 PM

  • Changing the behavior of a XCelsius 2008 Dashboard

    Hello all,
    i have a problem with the coded behavior of a dashboard in xcelsius 2008.
    The main scene is:
    there is an edit-field on the surface and a lot of checkboxes
    The user enters an internal number into the edit and then klicks on an checkbox to start a crystal-report
    this is the actual version and its ok: report starts and the entered number is given as a parameter to the report (via open-document)
    But the new requierement is, that if the user has clicked several checkboxes (and on the surface you can see several checkmarks) to start several reports and then reenter the given number in the editfield, all previous checkmarks had to be cleared on the canvas.
    I tried this in excel but i allways get a circular reference while trying to memorize the first number for a comparison with the next input.
    Perhaps it is more logical problem, but as a beginner on xcelsius i dont know much about the possibilities of coding within the excelshhet - is it possible to use vba-scripting for this?
    because if i use only formulas i can't solve this problem/requirement.
    Can anyone help, please?
    Thanks in advance

    Thanks for your quick answer.
    The reset-button is also in the Dashboard, but the idea was, that this action can be implemented, so that the user only has to insert numbers without clicking another element (the reset button) It was an idea of comfort to handle this implicitly.
    Thanks

Maybe you are looking for

  • Oracle Upgrade to 9i for BO 5i

    I'm preparing for an Oracle upgrade from 8.1.6 to 9.2 and a unix server migration via Oracle Export / Import. Potentially going on to 10g at a later point. Will importing the BO user and re-pointing users to the new database be sufficient to upgrade

  • Thunderbird is telling me that there is an unread message and it is one I read several days ago, listed in bold type again.

    Every day or so Thunderbird says there is an unread message. I look for it and find it on the list of my messages received. It is in bold type as if it is unread. However I had read the message days ago. I had this problem a couple weeks ago and deci

  • How to do session tracking in JSP

    I want to do session tracking in my JSP pages.Say once after the user logs in,on every page I can get his username for further use.Thank you for your help! Richard

  • Htmlcxx in Xcode 5.0.2

    Hello, im new in xcode and c++, and im trying to use ths htmlcxx library to parse html and css, but i have some issues, here is the code: #include <iostream> #include <html/ParserDom.h> int main(int argc, const char * argv[])     //Parse some html co

  • ADE not start after attempt to open application

    Hi, hope someone can help me with this issue, I try to open ADE application and every time just get a white blank screen even though I had reinstalled it again. Its works 2 wks ago.