Xcelsius based on BEx query. Issue when transporting from DEV to PRD

Hi all,
I am facing an issue as described below:
I created dashboard based on bex query in Query Browser. Everything is working find in DEV. Then I transport the dashboards to PRD, I also use the override settings to point from BOD-BWD to BOP-BWP, my connection changed accordingly. Everything seems ok. One day when we stop the BOD system. Dashboards in BOP are not working. Then I start BOD, everything is ok then.
The issue I got:
Internal: BOP....
External: BOD.../XcelsiusWebServices.
Is there any chance that dashboard in BOP using the BOD xcelsius web service?
I have resolved this issue by:
- Open the dashboard in BOP, then in each of the query in Query Browser, I clicked edit and click next, next until end.
- Then re-save to BOP, then it is working
For your information, I used BEx query in Query Browser only, not use BIWS.
Dashboard 4.0 SP04
BW 7.3
Does anyone face this issue before? And how you resolved it? Please kindly share with me.
Thanks,
Quan Vo.

Hi Quan,
Found few points regarding this.Please check might help you.
Migration of Dashboards (using Query Panel) on BI 4.0 environment - Business Intelligence (BusinessObjects) - SCN Wiki
Regards,
Javed

Similar Messages

Problems when transporting from DEV to PROD

Hi experts, I have problem during transport from DEV to Production.
We have a DEV, QAS and PRODUCTION and we have transport from DEV to QAS very well. But when we transport from DEV to PROD, recibe an error like:
After beginning the import method RS_IOBC_AFTER_IMPORT for Objects types IOBC mode (activation)
Failed to verify catalog InfoObjetos ZCM_UNIMET_CHA01
The InfoObjeto ZCM_RENC version does not exist in active
The InfoObjeto ZCM_RENM version does not exist in active
1.The Query is: Wy if the transport go OK from DE to QAS, then The transport from DEV to PROD terminated in error?.
2. There are any items to check in production before to transport?.
PD: All of the Objects in DEV are in ACTIVE status
Tanks,
Ramon Sulvaran

The transport ended in QAS with error code (4) and ended in Producion with error code (8), the detal of the error in Production begin with:
Home After import RS_ODSO_AFTER_IMPORT method for type (s) ODSO object (trigger mode)
Activation of DataStore objects of type Object
Check DataStore objects of type Object
DataStore Object Verification ZCM_DS01
The DataStore object is consistent ZCM_DS01
Burning the DataStore objects of type Object
Internal activation (DataStore Object)
Pretreatment / Creating DDIC objects to DataStore Object ZCM_DS01
Table / View / BIC/AZCM_DS0100 (type 0) DataStore object recorded ZCM_DS01
Create / Delete the indexes for the active table
Table / View / BIC/AZCM_DS0140 (type 4) recorded ZCM_DS01 DataStore object
Type of table / BIC/WAZCM_DS0100 recorded
Table / View / BIC/VZCM_DS012 (type VIEW) recorded ZCM_DS01 DataStore object
Log ZCM_DS01 DataStore object changes was recorded successfully
Writing Object Catalog entries (Tadiran)
He has written the object TABL / BIC/AZCM_DS0100 in catálgo objects (Tadiran)
He has written the object TABL / BIC/AZCM_DS0140 in catálgo objects (Tadiran)
He has written the object TABL / BIC/VZCM_DS012 in catálgo objects (Tadiran)
He has written the object TTYP / BIC/WAZCM_DS0100 in catálgo objects (Tadiran)
Activate all ABAP Dictionary objects (5):
Error / Warning in progr.activación Dict., Detailed log> Detail
Activate table / BIC/AZCM_DS0100.
Lack of expansion to the category table
Lack of extension category for include or subtype .......
When i go to BW Production to check teh object. I see tha the Object was create but in inactive status (grey color). When y Try to Actiavate it y see the error: Error/ Warning in program Activation Dcit. Detailed Log -> Detail

Handle metadata of configuration objects when transported from DEV to QA?

All,
I was reading this blog /people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi
<i>"Unlike IR when we import the scenarios in ID the configuration metadata will be lost and have to be manually entered in the QA ID. For Ex: Parameters like source directory, filename scheme, FTP server will vanish and have to be entered appropriately as required for QA sand box. After entering the metadata we need to activate all the scenario objects in the ID. After successful activation your interfaces are ready for testing."</i>
From the above I understand there are somethings(like adapter metadata..) that has to be entered manually when the objects are transported from dev to QA.
So my question is, for what all objects of ID needs metadata to be entered manually in QA.
Party?
Business systems(business systems, bus servcies, integration process)?
Communication channels?
Receiver determination?
Interface Determination?
Sender Agreement?
Receiver Agreement?
I appreciate your reply
Thanks
KK

Hi,
first of all it's not adapter's metadata
(adapter's metadata is something completely different)
the "thing" that will dissapear is the adapters'
configuration (configuration of your communication channels) - that's all
RFC destination (idoc adapter) ftp server (file adapter) etc.
basically all you need to do
is to fill it one every system (QAT, PRD etc.)
Regards,
michal

Can not transport from DEV to PRD (Hang up)

Hi Experts,
Please help.. I have this problem, was not able to transport from Dev to Prod, it just hang up.. I've read a lot in web how to solve this problem and did the following:
   ==> Stop all TP running in OS level
   ==> Delete all pending job in Import Monitor (with truck logo)
   ==> and the last to be done is to delete the data from table TRBAT, but it took so long to delete the data in that table.. What I've noticed is that the data left in table TRBAT is the transport number wherein user was log-off during transport execution (as in the middle of the process)..
What should be the solution of this problem, as we can not proceed with the transport of our changes made in DEV system, as it just hang up in there.. and I'm also having this problem in deleteing data from TRBAT table.
Thanks.
Edited by: Deo Pasion on Feb 20, 2010 7:25 AM

Hi,
Its well known problem which is discussed many times in many threads.
Did you check TP System Log and TMS Alert of the System ?
Execute RSTPTEST report to check the STMS configuration. Also check the existence/status of RDDIMPDP Background Job.
Please refer these useful threads with similar symptoms.
[Transport (STMS) issue + Hang|Transport (STMS) issue + Hang]
[regarding STMS_IMPORT Transport Hang.|regarding STMS_IMPORT Transport Hang.]
Also check this SAP Note 71353 - Transports hang during background steps.
Regards
Bhavik G. Shroff

BEx Query to be transported from Production to Development

Hi All,
We have got an unusual scenario in which we have to import/transport few Bex queries from Production to Development environment. I understand this is not a best practice, but any one suggest the way to implement the same.
Thanks,
Jay

Hi Jay,
For every transport which moves a transport route is configured in transaction STMS (Transport Management System). Ideally it is Dev --> Qal --> Prod. Usually we do not have access to this transaction as Basis Team Configures this route. Check once in transaction STMS (if you have access) that whether the route Prod --> Dev is configured or not (i doubt it would be).
In that case you can raise a request to Basis to configure this route for this exceptional case, if they agree then Transports can be moved via this new configured route.
Regards
Raj

0Material is blocked by conversion when transporting from Dev to quality Bo

Hi All,
I am transporting omaterial , I had selected with data flow before option while creating the transport request , when importing the request i am getting the following error in the quality box" 0Material is blocked by conversion "i had already transported the table view ( t ocde osml)
Please guide me to resolve this issue .
thanks in Advance
suitable answer will be awarded

Hi Krishna,
Goto SE14, Give all the relevant tables one by one and Delete data and acivate.
1. SE14
2. Eneter table like /BI0/PMATERAL
3. On the next screen select the option Delete Data and Activate.
4. Repeat step 1 to 3 for all the other tables.
To find out all the tables:
1. Goto Se14
2. /B10/*Materal
3. press F4.
Hope this helps.
best regards,
Kazmi

FAQ: CR (based on Bex query) bursting with Local profile

We have the following scenario
1. A CR based on BEx query, specified to use a BW account with the property - 'use same DB account for refresh'.
2. Created a profile with two different Groups, each group having a specific CR expression for a field. The users in this group are enterprise aliases not BW aliases
3. Created a publication with the above two Groups as 'Enterprise Recipient'
4. Assigned personalization on a specific field with local profile (the profile created in step2)
When we schedule the publication with the option 'single DB refresh for each batch', it fails with the error "User specific security is in use. One database fetch per recipient must be used"
Env: BOE XI 3.1 SP2, Windows
Edited by: Rajesh Jayakumar on Oct 27, 2009 9:33 PM

Hi,
would suggest you open it in the general BusinessObjects forum as this doesn't look to be related to the SAP Integration Kit
Ingo

How to bulid a Crystal report based on Bex query as source

Hi,
I have requirment where the end user wants the query in Crystal.I built a Bex query in Bex query designer.I would like to know how to create crystal report based onthe Bex query.
Thanks,

Hi
The Crystal Reports are integrated with BW such that the query built in BW can be used to bulit Crystal Reports on them.
After launching the Crystal Reports, you will have and option : "Open reprt from BW" whcih will help you in opening the BW Queries and create Crystal Reports.
Also in the Menu there is an optin SAP-->Create New Report from a Query
Regards, Hyma
Edited by: Hymavathi Yanamadala on Aug 13, 2009 5:52 AM

Rolling month for webi report using Univ based on BEX Query

Dear Experts,
I'm new to OLAP universes.
We have a requirements of having last 12 months rolling for given measure(Key figure) in webi report using Univ based on Bex Query.
We require a calmonth (time dimension) object (restricted for last 12 months) where user can drag and drop on column section of cross-tab table. User should drag more than one Key figure ( for ex. sales rev and & qty sold) for each month
Could you please provide me the solution to do this?
Thanks
Akshara

Hi Henry,
Thank you for your response.
BEx query has not been created yet. we need to create accordingly and require your help in creating the same.
Regarding reporting requirements, User wants to have adhoc reporting with rolling months ( 12 months or 6 months) functionality. Users want to link any KF to this rolling months dimension.
If we can't have this, what is the alternative that we can propose to user.
Thanks
Akshara.

JMS issues when migration from weblogic 9.2 to 10.3.5

We are facing some issues when migration from weblogic 9.2 to 10.3.5
In weblogic 9.2 :_
BMP Entity EJBs used in our project are read-only in nature using entity cache, below is the configuration details
<!DOCTYPE weblogic-ejb-jar PUBLIC "-//BEA Systems, Inc.//DTD WebLogic 6.0.0 EJB//EN" "http://www.bea.com/servers/wls600/dtd/weblogic-ejb-jar.dtd">
<weblogic-ejb-jar>
<weblogic-enterprise-bean>
<ejb-name>
Company
</ejb-name>
<entity-descriptor>
<pool>
<max-beans-in-free-pool>300</max-beans-in-free-pool>
<initial-beans-in-free-pool>150</initial-beans-in-free-pool>
</pool>
<entity-cache>
<max-beans-in-cache>3500</max-beans-in-cache>
<idle-timeout-seconds>100000</idle-timeout-seconds>
<read-timeout-seconds>0</read-timeout-seconds>
<concurrency-strategy>ReadOnly</concurrency-strategy>
</entity-cache>
Entity beans will get refreshed using the JMS messges. with in the MDB descriptor files(weblogic-ejb-jar.xml) we are using the provider URL directly and XA enabled connection factory is set to false.
migration to Weblogic 10.3.5_
With the same configurations MDB are not not getting deployed in weblogic 10 with some exception, so we removed the provider URL from weblogic-ejb-jar.xml and changed the JMS configuration to use foreign JMS and XA enable connection factory is set to true. Now when ever the JMS message is triggered Entity bean is not getting refreshed with the updated values. i.e values are stale.
Can some one look into this and provide your inputs to resolve this issue.

I think the Entity bean refresh problem appears to be unrelated to MDBs. The MDB is only responsible for getting the message to your application (which in turn interacts with Entity beans). You might want to try posting your question to an EJB newsgroup.
Tom

Has anyone else noticed that: "The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that: Resolve a Wi-Fi connection issue when waking from sleep" didn't work?

I installed OS X Lion v10.7.3 because of the following claim.
The OS X Lion v10.7.3 Update includes Safari 5.1.3 and fixes that:
Resolve a Wi-Fi connection issue when waking from sleep
It continues to be a real pain having to reconnect to the network each time I wake my MacBook Air from sleep.
Does anyone have a suggestion for the resolution to this problem?

It seems the update fixed old problems for some and caused new problems for others. Sorry to hear you're in the latter group.
Here are some things to try.
1. Go to System Preferences > Network, and click the gear icon under the network interfaces like so:
Whatever service order you have set, drag Wi-Fi either to the top (assuming it's not already there) or someplace else in the list. Click OK and then Apply. Sleep the system then wake it again to observe any changes.
2. Click Wi-Fi in the above then click Advanced. Select all the networks your computer has ever joined and delete them with the "-" button. OK then Apply again. Select your network under the AirPort icon to re-join it. Sleep and wake again to see if that did anything.
3. Try creating a new, temporary user account. Log in under that account to see if its behavior is any different.
You may have done all of these already but perhaps there is something you have not thought of. If nothing helps we may just have to wait a bit longer for Apple to release a fix.

Transporting SQ01 Customer Query from DEV to PRD

Hi All,
I am not sure whether I am in the right forum, but maybe you still can help me.
I created SQ01 for Customer Master query in our DEV environment, and i assigned t-code for the query.
Can i transport it in our PRD? Or it is more advisable to create the t-code in PRD directly?
Please note that the query is both existing in DEV and PRD.
Hoping for your positive feedback.
Thank you.

Hai TINA,
Hope you would have created T code using SE93 for your query program.
and your SQ01 program may be like this, and in the program the bold letter differs from client to client.
AQ FU SYSTQV000003XXXXXXX===
AQ IC SYSTQV000003XXXXXXX===
So while transporting it may give error that the program is not in the client, or while executing the T CODE it may give dump.
Hence create the query in production client and create the T code for the program and assign to the users.
Some tips may be helpful:
1. Always Use T code : SQVI to create the ALV report, user friendly that SQ01.
2. In case if you are making Customer master details report, if you are include all customer master tables, in case for some customer if some details were not maintained then the details will not displayed.
In that case, in the joint between two respective tables, right click and change it to Left Outer join.
3. If some data is replicated, then need to change the table path, like in case of billing always start from Biling item then to Billing header.
Regards,
Mani

Resolve a Wi-Fi connection issue when waking from sleep

Hi,
In the recent release for Mac OS X Lion 10.7.3 "Resolving a Wi-Fi connection issue when waking from sleep" was supposed to be resolved, not so at my end. Has anyone else encountered the same issue and if so will there be a resolve.
Thank you

Hello BGreg and thank you for your answer,
I have alreadty read about this solution, and tried it.
I downloaded the 1.2 Go file, and applied it. And repaired permissions.
Everything went fine.
Unfortunately, it didn't solve the problem.
Meaning that when iMac wakes up, it doen't join my WiFi network.
I have to do it manually.
I don't know what to do : it is very strange because I never had that problem with OS 10.7.2 !
And my network setup has never changed.
another info :
I noticed that in the network setup screen, when I want to close the little lock to restrain further modifications, it won't close. Weird !
Do you think I should call Apple Assistance ?

Transporting from DEV server to Production Server

Dear Experts,
Like in ABAP and other SAP modules we are having Transport Requests to transport from Dev server to Production server In XI how can we transport all the configuration done by me from Dev server to Production server.

Hi,
In XI we can transport in two ways :
1) File Transport
2) Using CMS which needs configuration to be done
Using the File Transport you can easily the Export the Objects and Import the Objects in the Target system.
Select the Object in the Design or Configuration ->right Click you will find Export option.
When you select the It creates the .tpz file which can be imported in the Target System
Using file transfer or CMS we transport xi objects.
Transporting XI from DEV to QA
Look into this blog for how to export / improt IR and ID objects,
XI Software Logistics II: Overview
XI Software Logistics 1: SLD Preparation
Transporting IR,ID Objects using File System
http://help.sap.com/saphelp_nw2004s/helpdata/en/93/a3a74046033913e10000000a155106/frameset.htm
http://help.sap.com/saphelp_nw2004s/helpdata/en/a8/5e56006c17e748a68bb3843ed5aab8/frameset.htm
Regards
Ganga

Transporting active version of datasource from DEV to PRD

Hi,
When I transport a 3.x datasource from DEV to PRD, the version I am getting in PRD is 'modified'. In DEV we have both modified and active versions and there's no difference between them. When I try to activate the modified version, it says that I have to maintain the transfer rules associated with the datasource. Then it takes me to the transfer rules display but I am not sure what to do next...how to activate the datasource. How do I get the active version from DEV to PRD?
Thanks

Hi,
Pls Refer this link for details about transporting BI Objects
http://help.sap.com/saphelp_nw04s/helpdata/en/0b/5ee7377a98c17fe10000009b38f842/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/media/uuid/224381ad-0701-0010-dcb5-d74236082bff
Hope this helps,
Regards
CSM Reddy

Xcelsius based on BEx query. Issue when transporting from DEV to PRD

Similar Messages

Maybe you are looking for