Xcelsius dash board showing warnings
Hi,
We are executing xcelsius dash board , which is built upon Bex query by using BICS connectivity
.Now that dash board is showing warning messages as these messages are displaying in the Bex Query.
can anybody suggest why this messages are showing in the xcelsius or how to suppress these warnings either at the backend or at the front end. we are using xcelsius 2008 sp3.
Thanks in advance...
Phani Rayasam
Hi,
I Tried to suppress the warnings in RSRT ,but still iam getting the warnings. can you pls suggest any other alternative from xcelsius point of view.
Thanks in advance
Phani Rayasam
Similar Messages
-
Any possibility to write code in Xcelsius Dash board
Hi ,
I am new to Xcelsius. I found that we can connect Xcelsius with the backend data via Web service. But the standred web service which we use has a very complex return structure. To make it presentable on UI we need to do some pre processing with the response returned via the web service. Earlier we have done that in action script to show some charts in flex. My question is : Is there any possibility to write a piece of code somewhere in Xcelsius to achieve that.
RegardsIdeally, it is best to have the data filtered and presentation ready once it's consumed by the SWF file. Preventing the Xcelsius flash from doing any additional processing will help with performance.
However, there is an SDK for Xcelsius 2008 that will allow you to develop your own components within Xcelsius. Go here for more information:
https://boc.sdn.sap.com/xcelsius/sdk -
How can we show percentages in BO Dash board Manager(PMDM)
Hi ,
Please help me to find the option in Dash Board Manager to show percentages of metrics.
Regards,
TejaHello josborne,
i feel for you as a year ago i was undergoing the same problem. I was using Basler cameras for bar code reading and i was using two of them at a time. i was getting the same error. In my case the issue was resolved after much pain. i changed the PCI cards, switched between a lot of softwares and hardwares to get the required results. In the end my issue came down to the Fire wire cable. I was using a very cheap cable. Perhaps this is the only thing i can add that you might be using some non+standard fire wire cable.
perhaps you can try replacing it and then see the results.
Regards
Asad Tirmizi
Design Engineer
Institute of Avionics and Aeronautics
" Its never too late to be, what u want to be"
Using LabVIEW 8.2 -
Dash Board in BO pord server is showing error
HI Expert,
While i open my dash board in BO production server it showing me error
"A database error occured. The database error text is: Unable to connect to SAP BW server SAP_CMINIT3 : rc=20 > Connect to SAP gateway failed
Connect_PM GWHOST=172.16.5.44, GWSERV=sapgw00, ASHOST=172.16.5.44, SYSNR=00
LOCATION SAP-Gateway on host pagebip / sapgw00
ERROR max no of cpic clients exceeded (300)
TIME Fri May 20 19:20:13 201
RELEASE 700
COMPONENT SAP-Gateway
VERSION 2
RC 633
MODULE gwxxrd.c
LINE 8386
COUNTER 6311
. (WIS 10901)"
Please tell me how to resolve this error, because sometimes dash board is working properly,
Thanks and Regards
Lalit KumarHi Experts,
I am waiting for reply.
Thanks and Regards
Lalit Kumar -
Using Dash board in Dot net Page
Hi,
I am using OBI dashboard. I have made my dash board looks fine.
But what i want to do is I want to integrate this dash board in dot net page.
I just want to show my dashboard in a dot net web page any code sample and any link
will be helpful.
I found a pdf at
http://download.oracle.com/docs/cd/E10415_01/doc/bi.1013/b31769.pdf
It is a long pdf and i have little knowledge about dot net.
i just want to show my dash board on my web site.
Thanks
UmeshUse urls like:
http://server/analytics/saw.dll?Dashboard&PortalPath=/shared/ABC/_Portal/ABCSummary&Page=PageName&NQuser=username&NQpassword=password&Action=Navigate&P0=2&P1=eq&P2=Time.Year&P3=1+2007&P4=eq&P5=Time.Month&P6=1+4 -
Hi
Do we have any reports which will be having dash board kind of thing similar to what we have in Create Periodic Declarations in ENGR T-code.
I need to have two panes the left one shows the countries in tree structure and the right with the corresponding screen elements (The right pane gets changed based on the country we select in the left pane and we can carry out the country specific tasks).
One more thing is do we have any user exits through which we can include our own Z-objects to meet this type of requirement?
Any pointers to this will be of great help.
Cheers
Mohinder Singhcheck ur mail.
<REMOVED BY MODERATOR - REQUEST OR OFFER POINTS ARE FORBIDDEN>
Thanks
Edited by: Alvaro Tejada Galindo on Jan 7, 2009 3:14 PM -
hi i found a spaces and dash board feature... when starting spaces or dash board hold down the shift key to make it apear in slow motion
Hi,
Plese try below method:
under (HKLM\SOFTWARE\Microsoft\Microsoft Operations Manager\3.0\Data Warehouse\):
• Increase the value of Bulk Insert Command Timeout Seconds to 80.
• Create a new DWORD value, name it “Search Command Timeout Seconds” and set its value to 300.
If these are custom Dashboards. If yes, are the built-in dashboards have the same issue. Does them show data as expected?
Regards,
Yan Li
Please remember to mark the replies as answers if they help and unmark them if they provide no help. -
Web App Monitor Dash board is blank after switching to paid subscription
Hello,
I have successfully created a web app, published it to azure, and have been monitoring it on the Monitor dash board with all the 6 metrics, cpu time, requests, data in, data out etc. ever since starting the trial, and have watched the metrics on the dashboard
show all the data without any problems.
This past weekend, we switched over to a paid subscription, and now the monitor dashboard is blank. No metrics are being shown, and I have all the previous metrics selected so they should be displayed in the window. I switched over to the "New Portal"
thinking that there may be an issue with the default management portal, but the new management portal is also blank.
We also have a SQL Azure database as well, and I am not having any problems viewing any of the metrics for the database from either the default management portal or the New portal?
Can anyone explain why this might be happening?
thanksHi,
I think this may be a Azure server issues, If your issue is still not fixed, then i would suggest you Open a Billing Ticket from portal by selecting portal errors and exceptions.
you can create a billing ticket
here.
I am also moving this thread to "Azure App Service - Web Apps" Forums for any other inputs from the respective community members.
Regards,
Nithin Rathnakar -
Hi all,
Can anyone send me the step by step procedure to create dash boards in BW 3.5 and 7.0.
ThanksHi Nagar,
You can design dashboards using Web Application Designer (WAD), Visual Composer or Crystal Xcelsius . You can create a web template in Web Application designer and place the web items like Chart, Tables etc. depending on your requirement. The output will be a web page. You can create Flash based dashboards using Visual Composer / Crystal Xcelsius.
To design a dashboard in WAD, refer this link.
http://help.sap.com/saphelp_nw04s/helpdata/en/44/b26a3b74a4fc31e10000000a114084/content.htm
This link will give you more information about BEx Web Application Designer.
http://help.sap.com/saphelp_nw04s/helpdata/en/1a/456a3badc1b315e10000000a114084/frameset.htm
Arun Varadarajan gives more information about the different Dashboard tools in this thread.
Dashboards - VC vs BEx WAD
Regards,
Hari
Edited by: Hari Krishnan K on Aug 3, 2010 3:51 PM -
Dash board report for make to stock scenario?
hi friends,
Here i am having a problem that, I need to do the dash board report to display the sales and production values (quanty s , value) with particular date comparission.
some more detailed.
my client need the report with day wise production and sales values with respective of material number. I can make the report if it is make to order situation. but , this is make to stock situation. and also mentioned that values should match the G\L Account ,ref: fs10n Transaction.
plz help out ......
rewards in advance.
Regards,
Naveen MThe definition of Organization structure might not allow you to do so
Please go throught the following link in detail http://help.sap.com/saphelp_47x200/helpdata/en/f4/7d3f9344af11d182b40000e829fbfe/frameset.htm
Summary from the above link is as mentioned below
You can plan material requirements at plant level or for different MRP areas. With MRP at plant level, the system adds together stocks from all of the individual storage locations, with the exception of individual customer stock, to determine total plant stock. The requirements are combined in the planning run and procurement elements are created for these pegged requirements with unknown sources. Individual storage locations can be planned separately or be excluded from planning.
In the case of material requirements planning on an MRP area level, only the stocks from the storage locations or subcontractor assigned to the respective MRP area are taken into account. Only the requirements in this MRP area are combined and procurement elements are created for them. This enables you to plan material requirements specifically for certain areas. -
Crystal Report and Dash Board Report templates
Hi All,
I was wondering can you help to find out few Crystal report and Dash Board report Templates for SAP Business One.
This in order to give demo to customers.
Link pointing to same is good enough. I have authorization to SAP portal and I have searched through it found only two template of Crystal report no Dash report templates.
Regards,
AdityaHi Adit,
For CR demo, you can use this youtube CR demo:
http://www.youtube.com/watch?v=bKLtTDNpQMM
For the CR sample templates donwload, you can check this link:
http://scn.sap.com/thread/1239521
If you want to create the template by your self, you can check this link:
http://scn.sap.com/thread/1627677
For dashboard sample, you can download from this link:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e0bd3605-e1ad-2d10-488d-f2e4fede1d46
JimM -
Error while executing the BO Dash Board
Dear Sapians
i am facing the following issues in the BO while execute the Dash Board.
But the authorization working fine in BW side . In the filter of the BO Dash Board i am getting the correct values which i was restricted in the BW side.
Please help me to solve this.
Thanks
HajiHi Vamsi.
The exactly erro refers to a problems when you try upgrade from these version to 11.5.10.
Can you read this note and apply solution? The note refers a patch, but the problem is the same.
After Patch 4334965, adstrtal.sh & adstpall.sh is failing with errors [ID 360046.1]
BR Rafael Ceolim -
Error while running script HyperV - Dash Board - VM and Storage Report
Hi Team,
I am getting below error while running HyperV dashoboard monitor & storage report script from Technet script library.
HyperV - Dash Board - VM and Storage Report
Finished processing VM - xxxx
Processing VM - xxxxx
Get-VHD : Unable to cast COM object of type 'System.__ComObject' to interface type 'System.Management.IWbemServices'.
This operation failed because the QueryInterface call on the COM component for the interface with IID
'{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object does not exist.
(Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:210 char:10
+ If (Get-VHD -VMID $vmDetails.VMID -ComputerName $cNodes.Name[$i])
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VHD], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.Vhd.PowerShell.GetVhdCommand
Get-VMNetworkAdapter : Unable to cast COM object of type 'System.__ComObject' to interface type
'System.Management.IWbemServices'. This operation failed because the QueryInterface call on the COM component for the
interface with IID '{9556DC99-828C-11CF-A37E-00AA003240C7}' failed due to the following error: The requested object
does not exist. (Exception from HRESULT: 0x80010114).
At C:\Scripts\HyperV-DashBoard-v2.1.ps1:238 char:12
+ If ((Get-VMNetworkAdapter -VMName $vmDetails.Name -ComputerName $cNodes.Na ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [Get-VMNetworkAdapter], InvalidCastException
+ FullyQualifiedErrorId : Unspecified,Microsoft.HyperV.PowerShell.Commands.GetVMNetworkAdapterCommandHi ,
I found that the problem had been solved in the script blog by your self :
http://gallery.technet.microsoft.com/scriptcenter/HyperV-Dash-Board-VM-Disk-299bac7d/view/Discussions#content
Best Regards
Elton Ji
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place. -
Including an link to an help file(*.chm) in dash board
hi,
is it possible to place an *.chm file(help file) in the dash board .
i tried but OBI is not opening it up in that format.
can some one give me an solution to this.
thanks'.chm' is a Microsoft Compiled Help file that only works in Microsoft Explorer. You are advised to convert it to a friendlier format like HTML.
As per Microsoft, due to a remote code execution vulnerability, you cannot open .chm from a URL. However there are some workarounds in the link below:
http://support.microsoft.com/kb/896054
Coming back to Oracle BI, you could open the link in a separate window, and ask users to download the chm. Once downloaded locally, the chm file should work fine.
HTH,
Nilanshu -
Management Dash Board creation in SAP BI 7.0
Hi Experts,
Plz give me the construction procedure of Management Dash Board creation in SAP BI 7.0.
Any material/links/documents/suggestions with u plz share with me.
Any Pointers will really appriciated.
Thanks in advance.
Regards,
Chinna.Hi reddy
go through these help links
http://help.sap.com/saphelp_nw04s/helpdata/en/80/1a637fe07211d2acb80000e829fbfe/content.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/23/054e3ce0f9fe3fe10000000a114084/frameset.htm
http://help.sap.com/saphelp_nw04s/helpdata/en/e3/e60138fede083de10000009b38f8cf/frameset.htm
will surely helps u
Regards
Kiran
*Do assign points for helpfull answers,its the way of saying thanks in sdn
Message was edited by: ravi kiran naalla
Maybe you are looking for
-
Itunes doesn't recognize my nano!
I tried everything, the five R's, reintalling everything and I realize that ipodservice.exe just doesn't run. Whatever I do, I can't make it appear in my task manager! HELP!!
-
Picture uopload in the solution manager using BSP
Hi Everybody I am trying to upload a employee pictures for the each user in the Solution manager using BSP. I have got some coding form the help but its not working. Kindly direct me the way I can go for the upload. Please help me out. With best rega
-
When writing changes to XMP . . . ?
I'm using LR 3.2 - When I select "automatically write changes into XMP" in the catalog settings my understanding is the LR either creates a XMP file for a modified image or if the image is a DNG then LR keeps the changes inside the DNG file. My quest
-
Gmail app has stopped working in iOS 8
I have been using the Gmail app on my current and previous iPhones for years. This morning, the app stopped working on my iPhone 5, which is running iOS 8.3.It will not connect to the network (I've tried several networks in different locations). I ca
-
Finder suddenly started opening folders in their own window
Hi everyone, I'm wondering if anyone knows what might cause Finder to suddenly start opening folders in their own window even though the Finder preference to do that is unchecked? Before this started happening, all folders would open in the same wind