Xcelsius for BPC microsoft / netweaver

Hello everyone,
I found a documument describing how to plug xcelsius reports on BPC microsoft and netweaver.
The document refers to a series of DLLs which wre supposedly contained in the zip file with the pdf document. There was no zip file and therefore no DLLs attached.
The owner of the document is Prakash Darji. Authors are Rich Heilman and Velavan Trichy.
If one of you read this could you please let me know where I can find these DLLs?
Thanks
Edited by: Eric Hammer on Jan 26, 2009 9:27 AM

Hello everyone,
I installed xcelsius service for bpc but xml retrieve only 0 value.
If i enable basic + integrated conncetion + prompt internet user/pwd, i have the followig message:
System.Net.WebException: The request failed with HTTP status 401: Unauthorized.
   at System.Web.Services.Protocols.SoapHttpClientProtocol.ReadResponse(SoapClientMessage message, WebResponse response, Stream responseStream, Boolean asyncCall)
   at System.Web.Services.Protocols.SoapHttpClientProtocol.Invoke(String methodName, Object[] parameters)
   at XcelsiusService.WebInfoService.WebInfoService.Query(String strQueryType, String strParameter, String strContext, String strSecurity)
   at XcelsiusService.QueryResults.GetUserInfo()
   at XcelsiusService.QueryResults.GetCurrentView()
   at XcelsiusService.QueryResults.Results()
Someone told me it depends on user which installed dll file that must be machine administrator.
I installed web service file with server administrator (BPCinstall) on sap bpc 5.0.502
Any kind of help will be appreciated.
Thanks,
romolo

Similar Messages

  • Xcelsius for BPC. Which version?

    Hello,
    Which version of Excelsious is needed to build dashboards in BPC? The how-to document lists Excelsius Designer 2008 as prerequisite, but I was unable to find any info on this product.
    Thanks.

    There are a number of references to Xcelsius 2008 on the Xcelsius page in the BusinessObjects Community [here|https://www.sdn.sap.com/irj/boc/xcelsius] on SDN. 
    https://www.sdn.sap.com/irj/boc/xcelsius
    For example there is a link to a user guide [here|http://help.sap.com/businessobject/product_guides/xcelsius2008/en/Xcelsius2008_user_guide_en.pdf]
    Best regards,
    Jeffrey Holdeman
    EPM RIG

  • Is there any trial version for Bpc microsoft?

    Hi all,
    Can anyone tell me is there any trial version for bpc?
    What is the requirement for installation ? like sql server 2005 is alone is required?
    Thanks
    Pooja

    Hi Pooja, If your question is answered can you please let me know where can i get the demo version to download and install on my PC? Thanks in advace.

  • Migration from BPC Microsoft Version to BPC netweaver Version?

    Dear all,
    we plan to migrate bpc.
    what tools that we use to Migration BPC Microsoft Version to BPC netweaver Version ?
    Any suggestion for safety technique?

    Hi Tara,
    As far as I know there is no automatic method provided by SAP right now to migrate from SAP BPC MS to SAP BPC NW.
    Please have in mind that the front end will be the same, but the backend will be different: BW, BADIS and ABAP (In NW) vs SQL, SSIS packages, Stored Procedures and Visual Basic (In MS). Which means that there will not be an easy way to perform this migration in an automatic way.
    Hope this helps

  • How to download the SP6 for BPC 7.0, Microsoft Edition?

    Hi,
    I'm not accustomed very much with the SAP portal, and couldn't find through notes or whatsoever where to download (or ask for download) the latest SP for BPC 7.0, Microsoft Edition.
    Could you help me?
    Thanks
    Daniele

    Hi Daniele,
    Go to https://websmp206.sap-ag.de/support. Login with your S User ID. Navigate to Downloads -> SAP service packs -> Support Packages and Patches - Entry by Application Group -> SAP application components -> BPC for microsoft -> BPC 7 for microsoft.
    You will find 3 categories there. You need to click on each of them and download the required SP.
    Hope this helps.

  • Not able to refresh data in Xcelsius from BPC

    Hi,
    I have created a simple xcelsius dashboard with refresh button and data grid.
    When I click reload in the preview mode am getting the log on screen where I am trying to connect to the address  http://servername in the EPM connection.
    But I am not able to log on with BPC user id and password.
    am using BPC MS 7.5
    please give me your expert advice.
    thanks,
    Bala
    Edited by: Bala on Jun 15, 2011 3:08 PM

    Hi Bala,
    Please review the How To Guide for this topic (note that this is for BPC 7.5 NetWeaver):
    http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8034121d-8419-2e10-229a-99ec678b64c5
    Regards,
    Zane

  • How to Add the business scenario for BPC by Using BPR

    Hi All,
    We want to Use Solution Manager BPR for Mapping of Business Processes for BPC and for this we checked and tried the same consisting of Solution Manager 7.0, "SAP Business Objects Business Planning and Consolidation" but it shows an  product version as for "SAP BPC 7.0 FOR MICROSOFT, " Only
    But in Solution Manager 7.1 System it is showing for both ""SAP BPC 7.0 FOR MICROSOFT,SAP BPC 7.0 FOR SAP NET WEAVER".
    Need to understand why it is not showing Netweaver in Solman 7.0 System and also for mapping this BPC in to Solution manager what are to be taken in to considerations.
    Please suggest on this, your help is highly appreciated.
    Thanks & Regards,

    Hello Hazira,
    do you have the same supportpackage level of component ST-ICO in both systems?
    The BPR content is always delivered with the ST-ICO component.
    Regards,
    Thomas

  • SQL Server 2008 on the Web/App server for BPC 7.0

    In a multi-server environment (DB/OLAP on a 64-bit platform, Web/App on a 32-bit platform), is it necessary to have SQL Server on the Web/App server if Reporting Services is not used?  Could you explain why SQL Server is needed on this server if Reporting Services is not used?

    Hi
    Reporting Service is a requirement for BPC. If it is not deployed on App Server, it can be deployed elsewhere but is required.
    Other SQL related things that go on App Server include:
    Reporting Services
    Shared Features
           Client Tools Connectivity
           Management Tools - Complete
           Business Intelligence Development Studio
           Integration Services
           Client Tools Backward Compatibility
    Microsoft SQL Server 2005 Backward Compatibility Components from Microsoft SQL Server 2008 Feature Pack
    Reporting Services/Integration Service requires SQL license(s). Standard ediiton of these can be used if you are not performing Load Balanced deployement.
    Regards
    Shaam

  • Do we need to Upgrade existing BI 7.0 to EHP1 for BPC 7.0 NW.

    Can BPC 7.0 NW be installed as App Server with EHP1 and then use our existing BI 7.0 as the database.  Or will our BI system need to be upgraded to EHP1?

    Tania,
    There are two basic configurations of BPC NW with regard to BW at customers:
    1. Install BPC on the existing/common Netweaver BW platform (with Ehp1 and at least SP03/05 - depending on version) - this is most common at customers that are either quite aggressive with their application of BW support packages and enhancement packs, or customers who do not have an existing BW installation and are primarily installing BW to support BPC version for Netweaver.
    2. Support two BW instances: One for the datawarehouse and one for BPC version for Netweaver - this is the most common architecture at customers who already have a mature BW installation and who wish to manage BW support pack and enhancement pack application without being constrained by BPC's requirements.
    Another reason we see this type of architecture (#2) is because of incompatibilities between add-ons - for example SEM requires the FINBASIS add-on that is incompatible with Ehp1, so you can't run SEM-BPS/BCS on the same system as BPC version for Netweaver. I hear that technically you can do it by overriding the Ehp1 installer but it is not supported and should not be attempted. The release of Netweaver Ehp2 complicates the matter even further, since it is unclear if BPC is compatible with Ehp2.
    As far as the question of whether it is too much overhead, that is a question that is going to need to be answered on a customer-by-customer basis. It depends on your budget, the maturity of your datawarehouse, your basis and BW management practices, and the maturity of your support organization, among other things.
    If you had a separate BW instance for BPC, then you would still need to load data into that instance directly in order to load to BPC. You would probably want to think of your BW instance for BPC as a datamart separate from you main BW datawarehouse.
    Hope that helps,
    Ethan

  • Training for BPC

    Hello Fellows,
    I am a sales consultant positioning BPC at many places, furthermore, I am also planning to get training for BPC. I am pretty confused at the moment with the following queries in mind:
    Is BPC a technical (programming type) side of SAP?
    Does one have to have a strong technical background?
    To what extent does BPC differ from BOBJ?
    What would be a more reliable side of choice, BPC or BOBJ?
    I would be heartily grateful if someone could come out of the shadow and shed some light on the aforementioned queries. Furthermore, it would be really helpful if someone could share few brochures about BPC.

    Hi Nauman,
    BPC it's a sw normally used for consolidation, planning, budgeting and cost allocation.
    First of all there are 2 different versions, MS based on MS SQL server (i.e. also stored procedures, dtsx packages etc.) and NW integrated in Netweaver platform (connected with BW) without stor. proc. dtsx, but with badi functions.
    Is BPC a technical (programming type) side of SAP?
    yes you have funtions, components, etc to connect your excel report or input schedules with a database and also logic script, MDX, badi, etc.
    Does one have to have a strong technical background?
    if you want to build a new project then yes, if you want only create or change some reports then no.
    To what extent does BPC differ from BOBJ?
    sorry I don't know BO but as I know this is just useful for reports probably powerful then bpc so if you want you can integrate it when you create some special reports.
    What would be a more reliable side of choice, BPC or BOBJ?
    probably if you work with BPC could be better to study it but it's more difficult then BOBJ, you need more time to know it.
    I would be heartily grateful if someone could come out of the shadow and shed some light on the aforementioned queries. Furthermore, it would be really helpful if someone could share few brochures about BPC.
    first of all if you decide to study BPC you can see the modules you need for a SAP certification
    https://training.sap.com/it/en/curriculum/cpm_75_it-planning-consolidation-it/
    see also the standard guides
    http://help.sap.com/bopacms100
    and http://help.sap.com/bopacnw101
    http://wiki.scn.sap.com/wiki/display/BPX/Enterprise+Performance+Management+%28EPM%29+How-to+Guides how to guides
    and http://wiki.scn.sap.com/wiki/display/CPM/Planning+and+Consolidation other docs
    Regards
         Roberto

  • WEBI & Crystal Report solution approach for BPC

    Hi all,
    Anyone know the solution approach for Web Intelligence and Crystal Report for BPC? I canu2019t seem to find any information with regards to developing these two types of reports directly from BPC. Iu2019ve got a document from SAP which mentions that although BPC is sitting on a BW platform and it has its own InfoProviders, SAP is not recommending to use these as the source.
    The approach for Business Objects Xcelsius is fine as I managed to find it.
    Really appreciate on any help that you can provide.
    Thank you.
    Cheers

    Take a look at below links.
    [Can you use Crystal Reports on a webpage without having to use session?|Can you use Crystal Reports on a webpage without having to use session?]
    [http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b|http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/8029cc96-6ff3-2b10-47a2-b30ea790ea5b]
    hope this helps,
    Bhushan.

  • Exporting R3 tables into Flat Files for BPC

    Dear BPC experts,
    I understand currently the way for BPC to extract data from R3 is via flat files. I have the following queries:
    1) What exactly are the T codes and steps required to export R3 tables into flat files (without going through the OpenHub in BI7)? Can this process be automated?
    2) Is Data Manager of BPC equivalent to SSIS (Integration Services) of SQL Server?
    Please advise. Thanks!!
    SJ

    Hi Soong Jeng,
    I would take a look at the existing BI Extractors for the answer to Q1, I am working on finishing up a HTG regarding this. Look for it very soon.
    Here is the code to dump out data from a BI Extractor directly from ERP.
    You need dev permissions in your ERP system and access to an app server folder. ...Good Luck
    *& Report  Z_EXTRACTOR_TO_FILE                                         *
    report  z_extractor_to_file                     .
    type-pools:
      rsaot.
    parameters:
      p_osrce type roosource-oltpsource,
      p_filnm type rlgrap-filename,
      p_maxsz type rsiodynp4-maxsize default 100,
      p_maxfc type rsiodynp4-calls default 10,
      p_updmd type rsiodynp4-updmode default 'F'.
    data:
      l_lines_read type sy-tabix,
      ls_select type rsselect,
      lt_select type table of rsselect,
      ls_field type rsfieldsel,
      lt_field type table of rsfieldsel,
      l_quiet type rois-genflag value 'X',
      l_readonly type rsiodynp4-readonly value 'X',
      l_desc_type type char1 value 'M',
      lr_data type ref to data,
      lt_oltpsource type rsaot_s_osource,
      l_req_no type rsiodynp4-requnr,
      l_debugmode type rsiodynp4-debugmode,
      l_genmode type rois-genflag,
      l_columns type i,
      l_temp_char type char40,
      l_filename    like rlgrap-filename,
      wa_x030l      like x030l,
      tb_dfies      type standard table of dfies,
      wa_dfies      type dfies,
      begin of tb_flditab occurs 0,
    *   field description
        fldname(40)  type c,
      end of tb_flditab,
      ls_flditab like line of tb_flditab,
      l_file type string.
    field-symbols:
      <lt_data> type standard table,
      <ls_data> type any,
      <ls_field> type any.
    call function 'RSA1_SINGLE_OLTPSOURCE_GET'
      exporting
        i_oltpsource   = p_osrce
      importing
        e_s_oltpsource = lt_oltpsource
      exceptions
        no_authority   = 1
        not_exist      = 2
        inconsistent   = 3
        others         = 4.
    if sy-subrc <> 0.
    * ERROR
    endif.
    create data lr_data type standard table of (lt_oltpsource-exstruct).
    assign lr_data->* to <lt_data>.
    call function 'RSFH_GET_DATA_SIMPLE'
      exporting
        i_requnr                     = l_req_no
        i_osource                    = p_osrce
        i_maxsize                    = p_maxsz
        i_maxfetch                   = p_maxfc
        i_updmode                    = p_updmd
        i_debugmode                  = l_debugmode
        i_abapmemory                 = l_genmode
        i_quiet                      = l_quiet
        i_read_only                  = l_readonly
      importing
        e_lines_read                 = l_lines_read
      tables
        i_t_select                   = lt_select
        i_t_field                    = lt_field
        e_t_data                     = <lt_data>
      exceptions
        generation_error             = 1
        interface_table_error        = 2
        metadata_error               = 3
        error_passed_to_mess_handler = 4
        no_authority                 = 5
        others                       = 6.
    * get table/structure field info
    call function 'GET_FIELDTAB'
      exporting
        langu               = sy-langu
        only                = space
        tabname             = lt_oltpsource-exstruct
        withtext            = 'X'
      importing
        header              = wa_x030l
      tables
        fieldtab            = tb_dfies
      exceptions
        internal_error      = 01
        no_texts_found      = 02
        table_has_no_fields = 03
        table_not_activ     = 04.
    * check result
    case sy-subrc.
      when 0.
    *      copy fieldnames
        loop at tb_dfies into wa_dfies.
          case l_desc_type.
            when 'F'.
              tb_flditab-fldname = wa_dfies-fieldname.
            when 'S'.
              tb_flditab-fldname = wa_dfies-scrtext_s.
            when 'M'.
              tb_flditab-fldname = wa_dfies-scrtext_m.
            when 'L'.
              tb_flditab-fldname = wa_dfies-scrtext_l.
            when others.
    *         use fieldname
              tb_flditab-fldname = wa_dfies-fieldname.
          endcase.
          append tb_flditab.
    *        clear variables
          clear: wa_dfies.
        endloop.
      when others.
        message id sy-msgid type sy-msgty number sy-msgno
        with  sy-subrc raising error_get_dictionary_info.
    endcase.
    describe table tb_flditab lines l_columns.
    " MOVE DATA TO THE APPLICATION SERVER
    open dataset p_filnm for output in text mode encoding utf-8
      with windows linefeed.
    data i type i.
    loop at <lt_data> assigning <ls_data>.
      loop at tb_flditab into ls_flditab.
        i = sy-tabix.
        assign component i of structure <ls_data> to <ls_field>.
        l_temp_char = <ls_field>.
        if i eq 1.
          l_file = l_temp_char.
        else.
          concatenate l_file ',' l_temp_char  into l_file.
        endif.
      endloop.
      transfer l_file to p_filnm.
      clear l_file.
    endloop.
    close dataset p_filnm.
    Cheers,
    Scott
    Edited by: Jeffrey Holdeman on May 25, 2010 4:44 PM
    Added  markup to improve readability
    Edited by: Jeffrey Holdeman on May 25, 2010 4:47 PM

  • Using Xcelsius for VC

    Hi All,
    I am new to Xcelsius.
    we are using VC (visual composer) in our project, where we didn't find file "Upload UI control". when raised a thread in VC forum and contacted VC profiessional they suggested me to use Xcelsius for developing my own User Interface controls.
    Please let me know how to create our own UI controls using Xcelsius 2008.
    Thanks,
    Pradeep

    requirement changed.

  • What are the required/recommended Antivirus exceptions for BPC ????

    I need to provide and implement a definitive list of required Antivirus exceptions for BPC (both Web and SQL servers).  We currently run v5.1 but I would also like to know if anything is different for v7, although I don't see why it would be.
    However, I only seem to have vague references to exception lists (e.g. BPC Log Files or SQL database files)
    So I find myself wondering what the rest of the BPC community do in this resepct ???
    If you could let me know what exceptions are generally made (or even better, if you have an actual list of recommended exceptions), I would be extremely grateful.
    Thanks
    Craig

    Do not real-time scan SAP BPC server program directories.
      Do not real-time scan SQL Server and Analysis Services server
    program directories.
      Do not real-time scan the SQL Server and Analysis Services data
    directories.
      Do not real-time scan log files, temp folders and backup
    directories.
      Monitoring of network traffic should be specific to file type where
    possible
      Ensure the SAP BPC XLA and DLL files are not scanned real-time
    (these files are located in the BPC program files directory)
      The OutlookSoft folder within the My Documents folder that stores
    application and personal files can be scanned but is likely to
    impact the performance of dimension downloads and the retrieval
    of documents from these directories (wizards, process selector
    menus, etc).
    Regards
    Sorin Radulescu

  • Open Hub For BPC Cubes

    Hi Gurus,
    I have an issue about the open hubs for BPC cubes. I have a need to take my transactional data from my BPC cube to a table.So  I want to create an open hub on my BPC planning cube.
    But when i create the open hub on BPC cube, it doesn't read the package. So, data cannot be read. But the open hubs work on my BW cubes.
    Is there anything i should do different for BPC cubes ? How can i make the open hub work?
    Thanks in advance..
    Fatih

    Hi Fatih,
    Glad you got this working, but a word of warning: As far as I am aware, customer SAP BW development linked to objects in the BPC namespace is not supported. It may very well work, but BPC may also delete and recreate BW objects at any time and without warning, which can leave you in a situation in your production environment that is very difficult to recover from without manual modification of the production BW environment.
    The recommended way to export data from BPC NW into a flat table is to use the BPC data manager Export package. You may want to try this option and see if you can meet your requirements this way.
    Ethan

Maybe you are looking for