Xcelsius is unable to load this file problem because the file is corrupt

Hi me name is Luis Diego and im working in a dashboard.
The first time i update the file was ok. After that the file start to send me the next message:
"Crystal Xcelsius is unable to load this file. The file may be corrupt or have features cannot be supported by this version of Crystal Xcelsius."
I try to open the file in other computers and in that computers the file was open it. All the computers have the professional version 4.5 so do i.
I reinstall the Crystal Xcelsius in my computer because i thought that the problem was a wrong install in the first time. But after i reinstall the software the problem doesnt go away.
So i need the help of someone to fix this.
Thank you for any help that can bring me.
Regards
Luis Diego Sancho Morera

I suggest you purchase a case and have a dedicated support engineer work with you directly:
http://www.sdn.sap.com/irj/boc/gettingstarted
Or
http://store.businessobjects.com/store/bobjects/Content/pbPage.CSC_map_countyselector/pgm.67024400?resid=jFmmLgoBAlcAAALO-iYAAAAP&rests=1278687224728

Similar Messages

Crystal Xcelsius is unable to load this file... no upgrade 4.5 to 2008 :(

Post Author: jezbraker
CA Forum: Xcelsius and Live Office
Anyone else having problems getting 4.5 files to open in 2008? I create a nice simple new xlf with a simple xls behind it and a just a grid component in 4.5, then try open the file in 2008 and i get... Crystal Xcelsius is unable to load this file. This file may be corrupt or have features that cannot be supported by this version of Crystal Xcelsius.im on the following versions...Version 4.5Application Version 4.2.4.3File Version 1.1.0.2Version 2008Application Version 5.0.0.99Build Number 12,0,0,121 I'm hoping that this is just a version issue with what was on ESD... the help file seem to suggest upgrade is simple so would but good to here of folks having sucess - and if so what versions your on thanks!jez.

Post Author: jezbraker
CA Forum: Xcelsius and Live Office
well i hope thats the case... but its a bit strange that neither the beta versions i tested or this ESD version (its not very clear as to if its pre-release - nothing on the splashscreen/about to indicate its not the full thing) can open 4.5 files... suggests that the beta did not cover backward compatability which is a bit concerning :(hopefully im just missing something simple!from the help file in the '08 version i have here...Xcelsius supports the ability to import a visualization created
with Xcelsius 4.5. This import ability lets Xcelsius 4.5 customers upgrade their
existing visualizations to take advantage of the new features of Xcelsius 2008.
Backup your current XLF, JPEG, and external SWF files before upgrading your
visualization.
Note: Xcelsius 3.0, 3.5, and 4.0 files cannot be
imported into Xcelsius 2008. To use these files in Xcelsius 2008 you must first
import them into Xcelsius 4.5, then import the files into Xcelsius 2008.

Xcelsius is unable to load this file.It may be corrupt or have features

Hi All,
While i am opening XLF file i got bellow message:
"Xcelsius is unable to load this file.It may be corrupt or have features that are supported by this version of Xcelsius"
i m unable to open that file .I lost whole thing.so can any one help me how to resolve this problem.
Regards,
Ramana

Hi,
Which version of xcelsius you are using now !
The file which you are trying to open may be created in higher version of xcelsius
So upgrade to latest version and try.
Before opening xcelsius check if EXcel.exe is running from taskmanager -->processes
if that is runnning end the process.
@sri

"Could not save (file name) because the file is already in use or left open."

Hello,
When I tried save as a file, I get an error msg:
"Could not save (file name) because the file is already in use or left open."
The file is not open anywhere accept Photoshop.
Mac Pro, OSX 10.5.6
Photoshop CS4.
I searched the forum but could not find anything even though i'm sure someone already asked it.
would love to get a solution for that.
thank you,
shlomit

There is a problem with both Photoshop and InDesign, then we can blame wich ever it is.
1. I open a .psd file in Photoshop CS4 by double clicking it in Bridge
2. This image is placed on a page in a open InDesign document.
3. Doing some changes in Photoshop on the image.
4. Trying to save and get this error message (this topics subject)
5. Deleting the image from the page in ID doc, it is the only one in the document.
6. Can't still save file.
7. Closing ID completely and now I am able to save the file.
I tried turning of Live preflight in Indegisn but that didn't help.
So probably the fault is InDesign or the MacOS. I didn't have this problem with CS3. It is a stupid problem because this type of workflow is pretty common and one would expect it to be solved by now.
Jan Suhr
Stockholm, Sweden

Excel cannot open the file 'file.xlsx' because the file format

Every now and then, when I try opening an Excel file, I get a message saying that "Excel cannot open the file 'file.xlsx' because the file format or the file extension is not valid. Verify that the file has not been corrupted and that the file extension
matches the format of the file.

Hi,
Which Excel version are you using? As far as I know, this issue is caused by malware on the affected machine.There are now two known variants of malware which causes this problem: Win32/Crilock.A and
Win32/Buma!rts. They have both been identified as a new family of ransomware.
We'd better clean your machine, run Microsoft Safety Scanner (http://www.microsoft.com/security/scanner/en-us/default.aspx).
For more detail information, please refer to the following link:
http://blogs.technet.com/b/the_microsoft_excel_support_team_blog/archive/2013/09/07/quot-cannot-open-the-file-because-the-file-format-or-extension-is-invalid-quot-opening-office-files.aspx
Regards,
George Zhao
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Could not save as (file name) because the file could not be found

When i try saving sothing it comes up with could not save as (file name) because the file could not be found and need to save this file. i could save stuff before but not anymore if anyone could help i would be grateful
im using photoshop cs5.1
Thanks keiron

We cannot know. These kinds of things are operating system errors with stuff getting blocked due to insufficient permissions, security tools interfering, network errors or whatever. Since you mentioned none of that, it's an "Ask your mom..." thing at this point, but if you provide more details, someone might be able to figure it out.
Mylenium

W henever I try to open an Adobe file I get this message: Adobe Reader could not open ....because it is either not a supported file or because the file has been damaged. This is driving me nuts. Can I purchase somethine from Adobe that will allow me to op

Whenever I try to open an Adobe file I get this message:
Adobe Reader could not open ..... because it is either not
a supported file type or because the file has been damaged
(for example, it was sent as an e-mail attachment and wasn't
correctly decoded). This is driving me nuts !! Is there an Adobe
product that I can purchase that will make my Adobe Reader
work??? Right now it is useless to me and I have an important
download taht was sent as an Adobe download file and after
I downloaded the file Adobe Reader refuses to open it.
Please Help!!!!

I am having the same problems!!! How can a person get help from ADOBE? Or do I cancel and find a different program for converting.

How do I fix my photosop when is says that it could not load FastCore Routines module because the file was not found?

Every time I try to turn on Photoshop a pop up shows up and says "Could not load the FastCore Routines module because the file was not found." How do I fix this?@

Here is a solution for an older version of Photoshop with a slightly different message, but it might be the same reason—trying to use older PS plug-ins with a newer version of PS:
http://helpx.adobe.com/photoshop/kb/error-could-load-fastcore-multiprocessor.html

Error: Could not save "file name" because the file name was not valid. (PS CS6 + WIN 7)

I have recently purchased a new desktop under WIN 7 as well as Adobe Creative Suite CS6.
My first internal hard disk is 2 TB, the second one installed is from my old PC, 250 GB.
I am getting this error when trying to save a file over an existing file using the “Save” command.
The message is wrong, because the file name IS valid.
This error is persistent.
This error does not occur when doing the same action on my second internal hard disk.
This error happens on files larger than about 1MB in weight.
What happens is that the original file over which I try to do the ”Save” command gets corrupted and lost.
If I don't use the “Save as” command to save my work under a different name, my work is lost.
The same problem occurs with both PS CS6 versions, 64 Bit and 32 Bit.
I am very disappointed and annoyed with this happening.
Any idea what is going on here?

ok ...
I think I have resolved this.
I forgot to mention that I have Sugarsync over that file structure.
However, I do not know if Sugarsync has anything to do with the error.
I copied the whole folder structure under a newly created folder, and I am no longer getting the error.
Thanks
Milan

I have installed 0S5 but restoring the backup doesn't work. the following messages appear: An error accurred while restoring this iphone (-20) because the backup was corrupt or not compatible with iphone being restored (my iphone 3GS)

I have installed 0S5 but restoring the backup doesn't work. the following messages appears: An error accurred while restoring this iphone (-20), followed by another message: because the backup was corrupt or not compatible with iphone being restored (my iphone is 3GS), I tried restoring the factory settings and then restore the backup, but the same problems and I have lost all my contacts, pictures etc

Hi Ckuan,
Thanks a lot for your advice.
Deleting the correupted back up means to delete the information of one month since the last back up I made is one month ago.....right?
This back up I made right before I restored my iphone. During the restore however my OS was upgraded to 5.1.1. and reading the comments on the internet it seems I am not the only one whom experience this problem.
Can it be that if I downgrade my OS back to 5.1. the back up will not be considered as corrupted? If so, how do I downgrade the iphone?
Thanks in advance.

I downloaded acrobat reader dc. after download completed, I could not open many PDF files. Error read: "could not open this file because its either not a supported file or because the file has been damaged". I opened a new user account and moved these fil

I recently downloaded acrobat reader dc. After download was complete, I could not open PDF files. Error read "Adobe acrobat reader DC could not open this file because its either not a supported file or the file has been damaged". Any suggestions?

HI davidd92392148,
Is this error occurring for all PDF files that you try to open? There is an issue where all file icons can change to the PDF icon after installation, so is it possible that the files you're trying to open have been affected by this issue (and aren't actually PDF files)? Please see Application, file icons change to Acrobat/Reader icon.
If that document isn't the key, then please tell us more about these files. Where are they stored? Did they open in previous versions of Reader?
Best,
Sara

Random Artifact and "Could not save (file name) because the file is already in use or left open."

Hi,
I've been working on a collage for school, and I 'merged all layers below into one layer', and photoshop left me a random artifact on all my masks. Also, the same file has been suffering the 'Could not save...' problem. I have taken older versions of the file, brought them back to where I had been, and then a similar artifact appears (from various actions). Once the artifact appears, I can undo the action but not the artifact, and the file is useless. It happen on a second file, but the artifact was different (a rectangular hole in the middle of the masks).
I have a MBP/4GB/MacOSX 10.6.4, everything is up to date.
If anyone has any suggestions, it would be really appreciated... I'm working for a deadline at school.
Thanks,
Patrick

Hi Chris,
I have updated both the Adobe suite and the MacOSX. My school has CS5. The holes cut into the image in a geometric pattern (the rectangles) are the random artifact (cropped below).
Also, I understand 'Could not save...' means it could not save... Why it cannot save seems to be the issue. I believe you understand the circumstances of the 'Could not save...' issue, and it isn't simply that another program has it open.
http://forums.adobe.com/thread/370206?start=50&tstart=0
I don't really know if it's Adobe, Apple, or Windows issue, and I don't think it really matters. It is a problem in Photoshop, which would make it an Adobe problem... and waiting for a fix doesn't seem to be a satisfactory answer.
I don't want to make this tread about politics, I want to fix my file, and I thought it might be another symptom to a bigger problem.
Thanks for your response,
Patrick

Itunes could not copy [File Name] because the file could not be read.

Im trying to sync my ipod with my newly updated collection in itunes. But im getting the above error on random songs during the update process. Sometimes it will get 100/3000 songs complete before i get the error. Other times it only gets 4/3000. There doesnt seem to be a connection to the songs it has trouble on either. Some of the songs are newly added, and some of the songs i already had on my ipod. But it seemed to want to wipe my ipod clean first because i had changed too much in itunes or something. After i get the error itunes seems to think i have disconnected the ipod and wont detect it again until i unmount/mount again. My ipod library also stays empty, even when it gets 100/3000 songs synced before the error.
I am using windows 7 and an ipod touch version 4.2.1

Two possibilities come to mind.
Check your source hard drive for errors, right-click on the drive holding the library, click Properties, tools, check for errors, scan for and attempt recovery of bad sectors...
Or...
Repair Security Permissions
Right-click on your main iTunes folder and click Properties, then go to the Security tab and click Advanced. If necessary grant your account and SYSTEM full control of this folder, subfolders and files, then tick the option to replace permissions on child objects which will repair permissions throughout the library. This is the XP dialog but Windows 7 shouldn't be too different.
If it won't let you change the permissions use the Owner tab to take ownership from an account with administrator privileges.
tt2

Could not load default Extrusion presets because the file was not found.

Hello,
I am getting the above error when starting photoshop CC.
I am working on an iMac with 10.7.5 system software.
I can find the 'Default Extrusion Presets.p3e' file in the repousse folder but not elsewhere and dont know if it should even be elsewhere?
Thanks

So there's something wrong in my whole system, where I'm using all kinds of different tools (big and small tools) for my various projects without a single hitch... but somehow photoshop has encountered a problem within his own set of files.
Again, a problem that photoshop error checking capabilities shows as a single file missing, which one would thing that's like a 5 min solution, but no. The entire monster needs to be reinstalled.
You understand my login right?

Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object

Hi Everyone,
Please help me on this issue. I'm a new SSIS User.
I've installed Sql Server 2005 Developer Edition
When I create a new SSIS Project in Business Intelligence Development Studio,
I get the following message:
"Microsoft Visual Studio is unable to load this document: Object reference is not set to an instance of an object".
Error loading 'package.dtsx'bject reference is not set to an instance of an object
When I try to debug the package, I get the below message:
parameter Component(System.Design) is null.
I've uninstalled and installed SS 2005 several times, yet the problem persists.
Please help.
This is the package.dtsx
<?xml version="1.0"?><DTS:Executable xmlnsTS="www.microsoft.com/SqlServer/Dts" DTS:ExecutableType="MSDTS.Package.1"><DTSroperty DTS:Name="PackageFormatVersion">2</DTSroperty><DTSroperty DTS:Name="VersionComments"></DTSroperty><DTSroperty DTS:Name="CreatorName">US\kothand1</DTSroperty><DTSroperty DTS:Name="CreatorComputerName">US6051KOTHAND1</DTSroperty><DTSroperty DTS:Name="CreationDate" DTSataType="7">4/8/2008 10:53:39 AM</DTSroperty><DTSroperty DTS:Name="PackageType">5</DTSroperty><DTSroperty DTS:Name="ProtectionLevel">1</DTSroperty><DTSroperty DTS:Name="MaxConcurrentExecutables">-1</DTSroperty><DTSroperty DTS:Name="PackagePriorityClass">0</DTSroperty><DTSroperty DTS:Name="VersionMajor">1</DTSroperty><DTSroperty DTS:Name="VersionMinor">0</DTSroperty><DTSroperty DTS:Name="VersionBuild">0</DTSroperty><DTSroperty DTS:Name="VersionGUID">{FBD98635-EDDE-4F58-9D53-356E8CB653FB}</DTSroperty><DTSroperty DTS:Name="EnableConfig">0</DTSroperty><DTSroperty DTS:Name="CheckpointFileName"></DTSroperty><DTSroperty DTS:Name="SaveCheckpoints">0</DTSroperty><DTSroperty DTS:Name="CheckpointUsage">0</DTSroperty><DTSroperty DTS:Name="SuppressConfigurationWarnings">0</DTSroperty><DTSroperty DTS:Name="ForceExecValue">0</DTSroperty><DTSroperty DTS:Name="ExecValue" DTSataType="3">0</DTSroperty><DTSroperty DTS:Name="ForceExecutionResult">-1</DTSroperty><DTSroperty DTS:Name="Disabled">0</DTSroperty><DTSroperty DTS:Name="FailPackageOnFailure">0</DTSroperty><DTSroperty DTS:Name="FailParentOnFailure">0</DTSroperty><DTSroperty DTS:Name="MaxErrorCount">1</DTSroperty><DTSroperty DTS:Name="ISOLevel">1048576</DTSroperty><DTSroperty DTS:Name="LocaleID">1033</DTSroperty><DTSroperty DTS:Name="TransactionOption">1</DTSroperty><DTSroperty DTS:Name="DelayValidation">0</DTSroperty>
<DTS:LoggingOptions><DTSroperty DTS:Name="LoggingMode">0</DTSroperty><DTSroperty DTS:Name="FilterKind">1</DTSroperty><DTSroperty DTS:Name="EventFilter" DTSataType="8"></DTSroperty></DTS:LoggingOptions><DTSroperty DTS:Name="ObjectName">Package</DTSroperty><DTSroperty DTS:Name="DTSID">{191D188C-EA6E-46D6-A46A-8C9F3C21C321}</DTSroperty><DTSroperty DTS:Name="Description"></DTSroperty><DTSroperty DTS:Name="CreationName">MSDTS.Package.1</DTSroperty><DTSroperty DTS:Name="DisableEventHandlers">0</DTSroperty></DTS:Executable>
Thanks
Best Regards

No I have not yet. I've applied just the windows updates. I rebooted after the updates, but the problem persists.
I evern tried importing the .vssettings file from my co-worker's. Also, I tried resetting the user settings
using "%programfiles%\Microsoft Visual Studio 8\Common7\IDE\devenv.exe" /resetuserdata.
I'm on Windows xp 2002 service pack 2. Sql server 2005 Developer edition.
Visual Studio info:
Microsoft Visual Studio 2005
Version 8.0.50727.762 (SP.050727-7600)
Microsoft .NET Framework
Version 2.0.50727 SP1
Installed Edition: IDE Standard
Microsoft Visual Studio 2005 Premier Partner Edition - ENU Service Pack 1 (KB926601)
This service pack is for Microsoft Visual Studio 2005 Premier Partner Edition - ENU.
If you later install a more recent service pack, this service pack will be uninstalled automatically.
For more information, visit http://support.microsoft.com/kb/926601
SQL Server Analysis Services
Microsoft SQL Server Analysis Services Designer
Version 9.00.1399.00
SQL Server Integration Services
Microsoft SQL Server Integration Services Designer
Version 9.00.1399.00
SQL Server Reporting Services
Microsoft SQL Server Reporting Services Designers
Version 9.00.1399.00
Thanks
Best regards

Xcelsius is unable to load this file problem because the file is corrupt

Similar Messages

Maybe you are looking for