Xcelsius - Stacked Column Chart - Overall value / Result
Hi *,
does somebody knows how I can display the overall value of my columns in a stacked column chart?
Or is there a workauround to do this?
Thanks and regards,
Markus
Yes, it would absolutely be nice if they provided this option for the stacked charts.
Couple of other options-
Create a bar chart that graphs the totals as one series. Specify that it should show the data values, adjusting an offset so the totals appear to the end/top of the bar, Place the totals chart behind your stacked bar chart. obvioulsy the cahrts have to align precisely.
Another option - concatenate the total amount so it appears as part of teh axis label. This works better for some scnarios than others.
See this video example to get an idea of how this might work.
http://everythingxcelsius.com/2009/06/show-chart-values-without-hovering.html
With SP3, if there are only a few series in your chart, another option you can play with is adding an additional series for each series in your chart. Have a very small value that won't register visually on the chart e.g. .001, and then assign category labels for each series that is total value for a series, and choose to display the lables. Hard ot explain this one well, I 'll see if I can put togeter a simple example. This gets ugly quickly.
I'd love to hear ideas from others.
Similar Messages
-
100% Stacked Column Chart
Hi,
We have a requirement where we have to represent data in 100% stacked column chart, the value on y-axis is the % value and the value on the column is the actual value (like # ).
For suppose data is like
Actual data % values
A 20 80 20% 80%
B 100 100 50% 50%
C 120 40 75% 25%
Can any one plz suggest me the way to represent in xcelsius as a 100% stacked column chart.
Thanks in advanceHi,
I think it's impossible to bind the series of a Stacked Column Chart to the percentage (20% 80%) while displaying the actual values on mouse-over in Xcelsius 2008. Is this what you want?
My suggestion is to use a Single Value component such as a Gauge or a Label to display the actual value on mouse over, to simulate the same effect as you want. To do this, set Interaction Option of the Stacked chart to Insert On Mouse Over, and for each series, insert the actual value to a cell in the embedded spreadsheet. Your sample data has 2 series, so they insert to 2 cells in the spreadsheet, as you cannot insert the actual value of 2 series into the same cell.
The Gauge is used to display the actual value of the currently mouse-over item. For this, you need 2 History component to track the change of either of the 2 cells, and insert to the same range. The Gauge then can be bound to the last cell of the Data Destination of the History components.
I have tried it out and if you want, I can send the source file to you.
Thanks,
Ray -
Stacked Column Chart Value does not show in Preview or SWF
I have created a simple (one-column) stacked Column chart from an imported Excel 2007 spreadsheet. I am using 3 values and all three are there when I am editing the chart. When I do a Preview or Export it to a .swf file, the third value does not show up. It only shows the first two.
I am running Xcelsius 2008, Version 5.1.3.0, build 12,1,3,495.
Edited by: Rich Krejsa on Apr 9, 2009 9:35 PMHi Rich,
Try to rebind the data with the component and preview and see.
Also check with other charts to see if you get the same behaviour.
Try placing a table component and display those cell and see what values are there when you preview.
There could also be posiblities that the third values must be very small as compared to the other two,so check that as well and may be select the secodry scale in the general tab for the 3rd series.
Let me know if this helps.
Thanks,
Amit Mathur. -
Dsiplay data values and data lables in a stacked column chart
Hi All
Is there a way to display data values and data labels in a stacked column chart. Mouse over or display of labels in legends wont help. It has to be in the chart .
Regards,
anshulHi Anshul,
You can display either data value or data label in a stacked column chart by checking the Data Label Displaying Mode option under Format Chart->Data Values.
You can also do the same by checking the same option under Format chart->Area Display->Data Values.
I dont think you would be able to display both in a column chart whereas you would be able to do it in a pie chart.
Hope this helps.
Regards
Sri Harsha -
Stacked Column Chart drill down
I have a stacked column chart. Data is dynamic. Sometimes one column will have 0 as value.
I need to do a drill down on the ones which has value. In order to do a drill down everytime, I don't want my drill down to be tied to a specific serie...
How can I do that?
Thanks,
WenHi Wen:
Let me do a quick demo to you so you can learn how drill down for stacked column chart works
1. Create a new stacked column chart.
2. Choose data binding "By Range" and "Data In Columns" binds to range "A1~C2", which has range data as following:
a, 1, 2
b, 3, 4
3. After finishing step 2, there will be two series created (Series 1, and Series 2)
4. Open drill down tab and check "Enable Drill Down".
5. Choose "Insert Type" as "Row".
6. Click "Series 1".
7. Bind "Source Data" to range "D1~E2" which contains value as following:
11,12
13,14
(these are the drill down value you want to insert)
8. Bind "Destination" to "D3~D4" (empty cells)
9. Create another component "Grid" under "Other" folder.
10. Bind grid data to "D3~D4" to present the drill down data.
11. Preview the xlf file, can click values in series 1, you will see the drill down result. (Grid will be refreshed with new drill down data)
Hope the demo above can help you in your practice, also you can refer to help documents for more information. Let me know if you have any other questions!
Thanks!
Bill -
Having problem while using Stacked Column Chart.
Hi,
my result set is as below
STAGE OPERATION
TOTAL PCS
1 SIDE SEAM
6714
2 BIND BOTTOM
4522
2 SLEEVE ATTACH
6105
3 BIND TOP(E/N)
3781
5 SLEEVE HEM
3277
6 BIND TACK-2
1173
6 TACK-2
1277
6 TACK-4
268
I need to display it on the screen by using stacked column chart. I mean XAxis as "STAGE" YAxis as "TOTAL PCS" and "OPERATION" as series. I used DataBIndCrossTable as
chProd.DataBindCrossTable(dtView, "OPERATION", "STAGE", "TOTAL PCS", "Label=TOTAL PCS");
But, the results in the chart is displaying it in the first STAGE it self. I mean xaxis value 1 has all the yaxis value.
Can anyone please help me to get the results as first image?
I'm anable to attach the related images here.
Thanks in advance.
Regrds,
Rajesh.Got the answer.
Just added
chProd.AlignDataPointsByAxisLabel();
Regards,
Rajesh -
Drill Down between 2 stacked column chart with multiple rows.
Hi,
Can anyone please help me.
1) i have to create stacked column chart with Region and cout of calls for previous 3 quarters.
2) the 2nd stacked column should display the priority with the count of calls for the respective selection of region on the 1st chart..
to achieve this,
i'm using 2 stacked column charts and 1 lebel baseb menu.
from this i can able to get the drill down from label based menu to 2nd stacked column chart but i couldn't able to done the same from 1st stacked coumn chart.
Becoz my data is multiple row for each quarter.
please suggest me to achieve the drill down between 2 stacked column charts.
assume that my data like below.:
coulmns for 1st stacked column chart : Region, Q2,Q3 &Q4
Region Q2 Q3 Q4
Other 3658 3497 497
NA - North
America 3 3 1101
APJK 1 4 597
UK 324
EMEA North 1 1 288
CORPORATE 1 5 215
LA -
Latin America1 2 208
EMEA 1 199
EMEA South 1 1 169
Coulmns for 2nd coumn chart: Region, Priority, Q2,Q3,Q4 ()which is derived from 1st table.
Region Priority Q2 Q3 Q4
Other D: End of Next Day 1568 1613 239
Other C: End of Day 983 893 119
Other A: 2 Hour 631 610 70
Other B: 4 Hour 396 318 56
NA -
North AmericaD: End of Next Day 2 2 514
APJK D: End of Next Day 3 297
NA -
North AmericaC: End of Day 284
NA -
North AmericaA: 2 Hour 1 170
UK D: End of Next Day 157
APJK C: End of Day 1 1 152
Other E: 3 - 5 Business Days 68 58 13
EMEA North D: End of Next Day 1 136
CORPORATE D: End of Next Day 4 107
NA - North America B: 4 Hour 1 104
LA - Latin America D: End of Next Day 1 1 86
EMEA D: End of Next Day 86
UK C: End of Day 85
APJK A: 2 Hour 79
EMEA South D: End of Next Day 72
EMEA North A: 2 Hour 69
EMEA North C: End of Day 56
APJK B: 4 Hour 55
EMEA C: End of Day 1 53
LA - Latin America C: End of Day 54
UK A: 2 Hour 49
EMEA South C: End of Day 1 44
CORPORATE A: 2 Hour 1 43
CORPORATE C: End of Day 44
LA - Latin America A: 2 Hour 1 42
EMEA South A: 2 Hour 1 32
EMEA B: 4 Hour 30
UK B: 4 Hour 30
EMEA A: 2 Hour 27
EMEA North B: 4 Hour 1 26
NA -
North AmericaE: 3 - 5 Business Days 25
LA - Latin America B: 4 Hour 23
EMEA South B: 4 Hour 20
CORPORATE B: 4 Hour 17
APJK E: 3 - 5 Business Days 13
Other F: 6 - 10 Business Days 6 4
Other G: 11 - 20 Business Days 6 1Hi Srinivas,
I'm using label based menu "filterd rows" only but i couldn't bind the drill down with the 1st stacked column chart.
for mor details:
1) i'm having 2 stacked coumn charts & 1 lebel based menu but eventhough i couldn't able to achieve.
if i select the lebel based values then the 2nd stacked column charts is giving detailed valus but if i keep my mouse on the 1st stacked column chart the there is no changes on the 2nd chart..
somewhere i'm mising the binding data between 1st stacked coumn chart & lebel based menu on drill down part.
Becoz i'm having multiple rows. so can you please try your and send me the xlf file using your concept. -
Help Creating Dynamic Stacked Column Chart with Multiple Criteria
Hi all. Im new here and hoping you can help. I have a dashboard Im trying to rebuild from scratch (our computer had a meltdown and we lost all our files). I did not build the dashboard initially so Im trying to recreate it from the flash file we were able to recover. I have come across a chart that I just cannot figure out how to do. I can figure out how to write an array in the Excel sheet that pulls the data into a table the way I need it to be but found out after I wrote that that Xcelcius doesn't support arrays so all my data disappears when I go into preview mode (which is especially frustrating since I can see the chart working fine in design mode). Anyway this is what the data table looks like
Month Year Company Positive # Negative # Neutral # Positive % Negative % Neutral %
October 2011 CompanyA 1234 1234 1234 10 10 10
October 2011 CompanyB 1234 1234 1234 10 10 10
October 2011 CompanyC 1234 1234 1234 10 10 10
October 2011 CompanyD 1234 1234 1234 10 10 10
November 2011 CompanyA 1234 1234 1234 10 10 10
November 2011 CompanyB 1234 1234 1234 10 10 10
November 2011 CompanyC 1234 1234 1234 10 10 10
November 2011 CompanyD 1234 1234 1234 10 10 10
December 2011 CompanyA 1234 1234 1234 10 10 10
December 2011 CompanyB 1234 1234 1234 10 10 10
December 2011 CompanyC 1234 1234 1234 10 10 10
December 2011 CompanyD 1234 1234 1234 10 10 10
The original chart was built so that you would choose the month from a combo box and then the company names would show up along the X axis with their % amounts shown in the stacked column. I know how to make a combo box work and I know how to make a stacked column chart work with static data. I cannot for the life of me figure out how to get it to work so that when you choose the month from the combo box it filters the data. I've tried filtered rows but I'm just missing some information that makes it work and I can't figure out what that information is. It has to be able to get the month/year combo from the combo box and then go to the table, filter it by month and year and then create a multi-row table of data with just the company and the percent values. Any help would be greatly appreciated!Which connection you are using?
IF quite difficult if you are working under static data. -
Help - How do I Add a Trendline to a Stacked Column Chart??
I have a stacked column chart (NOT a 100% stacked column chart) and need to add a line to show the year goal. I can do this in Excel, but for some reason can't figure out how to do this in SSRS. I read various tutorials, blogs and MSDN pages
but nothing works. The weird thing is that they all say that I should right-click on the chart and there should be a DATA tab...on the chart properties. THERE IS NO DATA TAB, i'm here to tell you. I'm using SQL 2012 so not sure if that might make
a difference.
So how do I do this?
Again, this can be done in Excel, don't understand why this isn't easier to do in SSRS.
BTW, completely separate rant here, but it takes me 20 minutes every single time I want to log into MSDN forums. It never seems to remember my password and I have to reset it, then jump through a bunch of security nonsense. Anyone else have this
problem?
Thanks!!Hello,
If I understand correctly, you want to add a line chart to display the Goal values in the stacked column chart. You can try to add the secondary field to the Values area and change the chart type to "Line". Both data field in the Values area
shares the Category group and series group. Please refer to the following screen shot:
If I have any misunderstanding, please post your report dataset with sample data for further analysis.
Regards,
Fanny Liu
If you have any feedback on our support, please click here.
Fanny Liu
TechNet Community Support -
the same with the following description from another question:
"How can I display a total on top of each column on a stacked column chart (using
reporting services 2008)? If I use Data Labels I can display the
values for each part of the stack on a stacked column, but I want to be display the total.
For Example: If I have stacked column on chart with a value of 10 for the 1st stack, 20 for the 2nd stack,
and 20 again for the 3rd stack - I want to display 50 (the SUM total) as the data label on top of the entire column..."
and a solution for this would create a new column named SUM(category group), this can be done with data source from SQL server, but my data is from SharePoint site list. its query seems can't be changed which means I can't add a SUM column.
what should I do with this? Can anyone give me a hand?
thank you very much.Hi sophiexu,
If we want to display a total for each column on the top of a stacked chart, we can use a matrix control to display the column total value to work around this issue.
The following thread about how to simulate chart legend is for your reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/cfb4fa19-b2ba-426a-804b-b5ea83d70d62/ssrs-2008-chart-legend-missing-customitems-property
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support -
Stacked column chart from XML data source
I have an XML file, which lists elements with three
attributes: date, inactive-interval, user-count.
I need to build a stacked column chart with a single column
for each distinct date, one stack for each distinct
inactive-interval for that date, and the height of the stack equal
to the user-count.
I can define ColumnSeries with yField="user-count"
xField="date", but I don't know how to partition the column into
stacks by inactive-interval values.
Here is a sample data set:
<?xml version="1.0" encoding="ISO-8859-1"?>
<data>
<snapshot date="01/01/2007" inactive-interval="0"
user-count="3"/>
<snapshot date="01/01/2007" inactive-interval="7"
user-count="2"/>
<snapshot date="01/01/2007" inactive-interval="30"
user-count="4"/>
<snapshot date="01/02/2007" inactive-interval="0"
user-count="4"/>
<snapshot date="01/02/2007" inactive-interval="7"
user-count="2"/>
<snapshot date="01/02/2007" inactive-interval="30"
user-count="3"/>
</data>Your CategoryAxis id="ha_ccm" uses categoryField="period", and this is the label for the your series (i.e. "Quarter 4/2010"). You cannot have multiple categoryFields for the CategoryAxis; it can only use one data field for the labels. You can use data tips and/or label functions to show the individual series' values on the columns.
Also:
Your labelField in the ColumnSeries are set to a ColumnSet name instead of a field name in your dataprovider.
Font must be embedded if you set ColumnChart.showLabelVertically="true". -
Crystal Presentation Design - Stacked Column Charts in 2 axis
Is it possible to create dual axis stacked column charts in Crystal Presentation design or Dashboard Design?
Thanks.
StineHi Stine,
As of today we dnt have that feature in Xcelsius . In latest service pack 4( SP4 ) also this feature is not there.
@Sri -
Hi to everybody.
I was wondering if there is a possibility to do the following :
On the stacked column charts you can show the value of each series. Is there a possibility to show for instance on the top the sum of the series.
Thanks in advance
Message was edited by: Series IIAI figured it out. It took special format/setup on the bex report side.
thank you to all... -
Lines and shading on stacked column chart
I have created a waterfall chart using a stacked column chart. I have made Series 1 white so that the bars appear to "float" . So far so good. the issue is that the white bars in the default setting have light shading and lines around the outsides. There seems ot be no way to turn that off. The only solution I found was to change the Theme to ITheme. Then the shading and lines go away and I can change the colours how I want them...but of course that theme is now applied to my whole dashboard and I lose all the nice shading effects on the other elements.
Surely all the themes do is apply formatting that must be possible to do manually...I just cant see any option on a stacked column chart to change the shading or lines round the boxes. I have an example chart I can share if required
Any suggestions gratefully received!
Thanks
TomCreating a custom chart is not a simple thing (think days, not minutes), and not done within Xcelsius. The group of technologies to do this are referred to as the Xcelsius SDK, there is a dedicated forum on this site here: Flex SDK Development
Have fun! -
Different sort order with line chart and stacked column chart
Hi,
I have a problem with sorting within flash charts.
The chart should be ordered by a date column.
If I'm using a line chart everything is fine. The columns in the chart are in the same order as returned by the query.
If I change the chart type to stacked column chart, I get a wrong order.
It is orderd like 5, 6, 7, 8, 9, 10, 1, 2, 3, 4.
What's wrong?
Here the query i use:
SELECT NULL AS link,
TO_CHAR (zeitpunkt, 'dd.mm.yyyy'),
MAX (DECODE (db_sid, 'TI06E', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI06E",
MAX (DECODE (db_sid, 'TI06T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI06T",
MAX (DECODE (db_sid, 'TI14S', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI14S",
MAX (DECODE (db_sid, 'TI14T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI14T",
MAX (DECODE (db_sid, 'TI16T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI16T",
MAX (DECODE (db_sid, 'TI24K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI24K",
MAX (DECODE (db_sid, 'TI33T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "TI33T",
MAX (DECODE (db_sid, 'WF03E', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03E",
MAX (DECODE (db_sid, 'WF03K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03K",
MAX (DECODE (db_sid, 'WF03T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF03T",
MAX (DECODE (db_sid, 'WF05K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF05K",
MAX (DECODE (db_sid, 'WF05T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF05T",
MAX (DECODE (db_sid, 'WF06T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF06T",
MAX (DECODE (db_sid, 'WF07K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF07K",
MAX (DECODE (db_sid, 'WF07T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF07T",
MAX (DECODE (db_sid, 'WF08K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF08K",
MAX (DECODE (db_sid, 'WF08T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF08T",
MAX (DECODE (db_sid, 'WF09K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF09K",
MAX (DECODE (db_sid, 'WF09T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF09T",
MAX (DECODE (db_sid, 'WF10K', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF10K",
MAX (DECODE (db_sid, 'WF10T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WF10T",
MAX (DECODE (db_sid, 'WG04T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WG04T",
MAX (DECODE (db_sid, 'WT05T', VALUE, NULL)) OVER (PARTITION BY zeitpunkt) AS "WT05T"
FROM db_performance_temp
ORDER BY zeitpunkt ASC
SQL> desc db_performance_temp
Name Null? Typ
ZEITPUNKT DATE
DB_SID VARCHAR2(30)
VALUE NUMBERI found the solution.
Anychart seems to have a problem with null values!
The corrupted sorting only occured for a specific set of search criteria and a specific day. At this day some values have been null.
I added a "nvl( [...], 0) for every value.
No I get a correct sort order.
Maybe you are looking for
-
Why does the edge of a rectangle show through image placed on top?
I can't figure out why the edge of my yellow filled rectangle shows through the images I place over top of it. A very thin but visible line appears in my image when the rectangle has no stroke, and a thicker, dark line appears when I apply black stro
-
Prevent viewing of source files - security-constraint
I'm using JSF and Facelets and I'd like to restrict visibility of the .xhtml source files. Currently if a user types in the source file name index.xhtml instead of index.jsf in the url they get presented with the raw source file. I've got a blanket s
-
How to create paging in air application
hi , I have created an air application which takes the data from a feed. I ve to create paging for my Richtext which wiil hold the description of my image.i took the length of the description from the feed using substring using the following code va
-
User not found error when connecting to MDM server using NWDS
Hi, I am getting the error as " User not found " when i am connecting to MDM server from the code written in NWDS. If i make that user as admin in usermapping in MDM den it works fine bt if that user is not admin den get the error as user not found.
-
Why is publishing to .Mac uploading previously loaded media?
I added a few movies to my site and hit "Publish to .Mac". As I watch the "Publishing..." progress bar, I can't help but notice that it is uploading photo albums, podcasts, etc., they I had already loaded! I know I had already uploaded them because I