Xclock and rapidwiz installer does not work
We are running Oracle E-Business suites 11.5.10.2 on Linux OEL 5 two node vmware system.
cannot run xclock and rapidwiz instaler.
I have set DISPLAY like that
DISPLAY=:0.0; export DISPLAY
when I run xclock, don't get any error message but clock does not show.
When I run rapidwiz , don't get any error message but installer does not run.
What I am missing. I am running from PUTTY from office network, what is missing.
Please help.
959660 wrote:
We don't have Hummingbird Exceed in our office. I downloaded xming software and launch xming.
set the DISPLAY to my PC ip address and also with the linux server etc/host ip address, tired xclcok command, again did not get any errors but could not see clock.
Then I opened VMware console, as soon as I log in to my Linux server through console, I was able to see clock plus the window executed by rapidwiz command from PUTTY.
So, my question is that if I vmware console window to upgrade r12 (installation and configuration), is that OK ?
Yes this is OK
I also need to know that my Linux libraries, kernal, patches are compatible with R12. Do I need to open another thread for this purpose.
Pl see this related thread - Requirements for Linux OEL 5 before upgrade to r12
Thanks for your help. I used this forum for the first time and really impressed, got prompt reply that I could not expect from my SR opened with the Metalink.
Regards
AsadHTH
Srini
Similar Messages
-
Good morning, AdobeSuite installation does not work and I receive"error initializing program, download adobe advisor" error message. On Adobe site it appears"The Adobe Support Advisor has been discontinued The Adobe Support Advisor tool was used to analyze installer log and system information associated with installation errors. The tool has been replaced with improved installation support mechanisms. Please visit Adobe Support section for Knowledge base articles around Installation."
Nobody can tell you anything without proper system info or other technical details. We don't even know what exactly you are trying to install.
Mylenium -
Trying to install iTunes on Windows 8.1. Apple Application Support was not found. Error 2. Uniinstall iTunes and try again, does not work. Is there a fix?
Let's try a standalone Apple Application Support install. It still might not install, but fingers crossed any error messages will give us a better idea of the underlying cause of the issue.
Download and save a copy of the iTunesSetup.exe (or iTunes64setup.exe) installer file to your hard drive:
http://www.apple.com/itunes/download/
Download and install the free trial version of WinRAR:
http://www.rarlab.com/
Right-click the iTunesSetup.exe (or iTunes64Setup.exe), and select "Extract to iTunesSetup" (or "Extract to iTunes64Setup"). WinRAR will expand the contents of the file into a folder called "iTunesSetup" (or "iTunes64Setup").
Go into the folder and doubleclick the AppleApplicationSupport.msi to do a standalone AAS install.
Does it install properly for you?
If instead you get an error message during the install, let us know what it says. (Precise text, please.) -
prompted to update iTunes today and now it does not work. tried reinstalling and caanot successfully reinstall.
Go to Control Panel > Add or Remove Programs (Win XP) or Programs and Features (later)
Remove all of these items in the following order:
iTunes
Apple Software Update
Apple Mobile Device Support (if this won't uninstall move on to the next item)
Bonjour
Apple Application Support
Reboot, download iTunes, then reinstall, either using an account with administrative rights, or right-clicking the downloaded installer and selecting Run as Administrator.
The uninstall and reinstall process will preserve your iTunes library and settings, but ideally you would back up the library and your other important personal documents and data on a regular basis. See this user tip for a suggested technique.
Please note:
Some users may need to follow all the steps in whichever of the following support documents applies to their system. These include some additional manual file and folder deletions not mentioned above.
HT1925: Removing and Reinstalling iTunes for Windows XP
HT1923: Removing and reinstalling iTunes for Windows Vista, Windows 7, or Windows 8
tt2 -
My "Weather" on the dashboard no long works. I have deleted it and added it anew and it still does not work. How can I get it back?
You must get 10.6 if they still have it, install it & update to 10.6.8 so you have the App Store to buy & download the huge 10.8 Installer.(10.9/Mavericks is the only download avaiable now without specially calling Apple).
Snow Leopard/10.6.x Requirements...
General requirements
* Mac computer with an Intel processor
* 1GB of memory (I say 4GB at least, more if you can afford it)
* 5GB of available disk space (I say 30GB at least)
* DVD drive for installation
* Some features require a compatible Internet service provider; fees may apply.
* Some features require Apple’s MobileMe service; fees and terms apply.
Which apps work with Mac OS X 10.6?...
http://snowleopard.wikidot.com/
It's been pulled from the online store & Apple Stores, so you have to call Apple to buy it, last I heard.
Buy Snow Leopard > http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard
Call Apple Sales...in the US: 1-800-MY-APPLE. Or Support... 1-800-275-2273
Other countries...
http://support.apple.com/kb/HE57
It looks like they might still have it...
http://store.apple.com/us/product/MC573Z/A?fnode=MTY1NDAzOA -
Thanks for responding. Since I upgraded ITUNES to IOS 6, my IPOD Touch no longer works at all. I had numerous apps, music and videos on this touch. It made me restore to factory reset and it still does not work!!! Nothing I do will work on this touch now. I have so much data on this, I don't want to loose or have to restore!
Can you help me?
ThanksIf you restored to factory settings/new iPod and still have the problem that indicates a hardware problem.
Make an appointment at the Genius Bar of an Apple store..
Apple Retail Store - Genius Bar -
My 1-year ipod nano locked up and would not start overnight. The on/off button will not work and stopped holding charge. No water damage, no fall, nothing unusual. I restored it (twice) but it will still not hold charge and on/off does not work. I tried to restore it again and charged it in three different locations with different cables. etc but nothing. Suggestions?
- After charging for 1/2 hour or so, does iTunes see the iPod? If yes, restore the iPod from backup.
- If no, se if placing the iPod in recovery mode will make it visible so you can restore the iPod. For recovery mode see:
iPhone and iPod touch: Unable to update or restore -
I am trying to open a service request and the site does not work.
I am trying to open a service request and the site does not work with ANY browser. I get the page https://getsupport.apple.com/GetParts.action which says "Send in for service. We just need a little more information." The continue button does not work. I've seen this problem before trying to file support requests. It's as if Apple simply does not want you to create requests.
I just went through several screens and had no problems. Try clearing your browser's cache and/or history.
-
My Iphone won't appear in my devices in Itune.... And the WiFi does not work on my phone.... I seems like there is no solution to update my phone to the new ios on my computer or WiFi without using the 3g because of this!!! help me out
Hello there, TempestBelcher.
It seems you've covered all the bases, but feel free to review the iPhone Troubleshooting Assistant for connectivity here:
Apple - Support - iPhone - Calls Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/calls/#section_0
If you've followed all the instructions then there are a few good recommendations for what to do next in the last step.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro D. -
I tried to install iTunes 10.6.1 for Windows (64 bit) and it says "A required iTunes component is not installed. Please repair or reinstall iTunes. (-42404). I have tried uninstalling everything and reinstalling and it still does not work. I then restored my computer to a week ago and tried to download and install the update and this came up again.
Check out this thread:
https://discussions.apple.com/thread/3677426?start=0&tstart=0 -
The message function on my Ipad just quit working. I was using it while in Mexico and it just quit. I have come home and synced my Ipad with Itunes and function still does not work. How do I get this function to work again?
When I use find file http://www.macupdate.com/app/mac/30073/find-file (which does tend to find files that "Finder" can't), it's not coming up with any other itunes library files that have been modified in the past week, which I know it would have been - unfortunately, I don't have a very recent backup of the hard drive. It would be a few months old so it wouldn't have the complete library on it....any ideas? I'm wondering if restarting the computer might help but have been afraid to do so in case it would make it harder to recover anything...I was looking at this thread https://discussions.apple.com/thread/4211589?start=0&tstart=0 in the hopes that it might have a helpful suggestion but it's definitely a different scenario.
-
Dear Sirs,when i use the computer updating my iphone to ios 7.1,suddenly black out.The computer has no power and my iphone does not work and keep display the screen saying the iphone need to connect to itunes. So when i connect my iphone to iTunes, the computer says"itunes has detected an iphone in recovery mode. you must restore this iphone before it can be used with itunes"
So my question is if I click OK(restore the iphone),will i lose all my data and whatsapp??
Thank you for your help and time.
Regards,
hopelessIf you didn't back up the phone to iCloud or iTunes (on your computer) BEFORE attempting the update, the data will be lost.
-
accidentally removed from,sharing and permissions the admin user,and now i do not when i find the home icon at my computer i do not have permmission,and the mac does not works properly,lots of question mark at the dock ,please help
I'm going to assume that since you deleted your hard drive and all its files, you had a backup, yes? If the backup has an OS (bootable clone), then you can boot into it by holding down the option key when you start up you iMac and choose the backup drive. Then use Carbon Copy Cloner or Super Duper to copy the files back to your iMac.
-
I have Photoshop cs5 and the pen does not work. The icons below also do not work. Why? and how can I activate them? Thank you , Wren
Why?
Do you expect an answer to that question based on the information you have provided so far?
Please read these and proceed accordingly:
http://blogs.adobe.com/crawlspace/2012/07/photoshop-basic-troubleshooting-steps-to-fix-mos t-issues.html
http://forums.adobe.com/docs/DOC-2325 -
Need help to cancel by Creative Cloud Subscription and Live Chat does not work
I need to cancel by Creative Cloud Subscription and Live Chat does not work for me. The the chat only sent me :You are not currently connected to a chat representative. When a representative was online and I can't send my message out.
Hi Joshua_U,
I would request you to to perform the steps of cancellation mention in these links
http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
http://helpx.adobe.com/creative-cloud/help/manage-creative-cloud-teams-membership.html.
In case you are still unable to complete it, please inbox me your order number.
Note-( Any Creative Cloud whose date of purchase is more than 30 days attracts a penalty except if you are opting to exchange it with different type of CC subscription, the order number of the exchange CC is required to fore go the penalty if applicable)
Regards,
Rajshree
Maybe you are looking for
-
I made an animation with a collection of bitmaps from fireworks. I wanted to use it in the "over" state of a button, but when I go to swap, all it give me is access to is the 8 bitmaps I imported, not the animation/movie clip I want as the over state
-
Errors found when running the example of "Five XSLT 2.0 Features ..."
Does anyone encounter the error "XSL-1015: (Error) Function 'current-group' not found" when running Oraxsl grouping_20.xsl? Despite I followed exactly what memtioned in the article, it still did not work. Thank you very much.
-
Who will stand up to this challenge?
K, so I edited a bunch of 60 second PSA's on a single Sequence timeline. I wanted to burn each one onto a separate DVD, so I opened up a new project and copy/pasted one of the PSA's onto the sequence. It appeared in a freakishly zoomed-in manner on t
-
What is the "Backup IP" reboot reason on the Cisco SPA 50x IP phones?
Hi, We have a customer, at a remote site with SPA504G phones, they have a problem with the phones rebooting once in a while, typically once an hour. In the reboot history on the phones the reason is "Backup IP". I cant find any reference to this in t
-
hi am a final yr computer science student i am planning to to take up a proj in JSF or struts.....pls do suggest me an application which cud be implemented using jsf ..... thx in advance Edited by: Aishwarya_Baskar on Sep 23, 2007 10:10 PM